INSTALLATION OF REFERENCE SYSTEM OF POZITIV-ME 1.2 (TEG CLASS)

Amount

Fabrication and installation of Rigid Fixation Stands for mounting of equipment along with foundation for repair stand as per technological stands STE for Pozitiv-ME 1.2

Installation of floor mounted equipment:- (a) Control Panel 2πM 1.1 (480 x 475 x 292 – 33 Kg) (b) Load Equivalent I (754 x 734 x 1265 – 95 Kg) (c) Load Equivalent I (754 x 750 x 1265 – 95 Kg) (d) Load Equivalent I (754 x 750 x 1265 – 120 Kg) (e) Control Panel 2πM 2.1 (595 x 440 x 113 – 82 Kg) (f) Control Panel 4πM 3.1 (595 x 440 x 180 – 205 Kg) (g) Control Panel 2πM 5.1 (572.5 x 1016 x 1306 – 100 Kg) (h) Control Panel 4πM 7.1 (575 x 579 x 812 – 45 Kg) (i) Convertor cπo-4-230-400 (350 x 424 x 480 – 56 Kg) (j) Convertor cπo-8-230-400 (518 x 450 x1303 – 180 Kg) (k) Convertor cπo-25-230-400 (518 x 460 x 173 – 340 Kg)x 2

Installation of Desktop Equipment as per technological stands STE for Pozitiv-ME 1.2

Fabrication and installation of trunking for connecting header for equipment ventilation and exhaust to building ventilation system with suitable manifold

Fabricating and installing ventilation and cooling ducts and trunking for:- (a) Console π.2πM 2.1 (b) Console π.4πM 3.1 (c) Console π.2πM 5.1 (d) Console π.4πM 7.1 (e) Console cπo-4-230-400 With suitable ventilation automation defined as per technological stands STE for Pozitiv-ME 1.2

Installation of accessories, meters, thermostats, panels, racks etc. as per technological stands STE for Pozitiv-ME 1.2

Installation of Dummy Antenna as per technological stands STE for Pozitiv-ME 1.2

Fitment of power supply sockets (30 nos) and power supply units (10 nos)

Laying of cables in channel trays as per cable log book as per technological stands STE for Pozitiv-ME 1.2:- (a) KMπBЭ 7 x 2.5 – 500 - 10 m (b) KHP3-T 2 x 6 - 50 m (c) KHP3-T 3 x 3.5 - 25 m (d) KHP3-T 3 x 1.0 - 10 m (e) KM 3M-500 37 x 0,75 - 45 m (f) KM 3M-500 7 x 1.0 - 25 m (g) KM 3M-500 52 x 0,75 - 50 m (h) KM 3M-500 12 x 0,75 - 25 m (j) KM 3M-500 10 x 1.0 - 105 m (k) KM 3M-500 19 x 1.0 - 95 m (l) KM 3M-500 7 x 2.5 - 20 m (m) Kyπ3BЭ-250 7 x 2 x 0.35 - 20 m (n) Kyπ3BЭ-250 14 x 2 x 0.35 - 5 m (o) πBMк3O 5-0,75MC 4.6 - 15 m (p) PK 50-7-11 - 175 m (q) PK 50-9-25 - 50 m (r) кBͶ-100 - 45 m (s) Power supply cables

Manufacture and Laying of of channel tray

Providing and laying of common ground work to all workplace for grounding of instruments, STE, repairing stand and measuring complex with non-insulated flexible wires with cross section of at least 4 mm 2 and maximum grounding resistance of not exceeding 4 ohms

Service – Manufacture and fitment of cable tallies 25 x 350 x 2 mm – Aluminium (Punched)

Removal and termination of old/ unused cables by terminating the shield circumferentially and grounding the core at both ends.

Shifting of STE for Pozitiv-ME 1.2 within the premises to the installation site/ room.

Connectiorisation of 400 connectors and glands for powering up the system with associated cable booting for the same as defined in technological stands STE for Pozitiv-ME 1.2

Degutting of existing compactor from room along with tracks

Shifting and installation of compactor at location defined in the Pozitiv installation room with tracks, anchoring, and foundation all inclusive.

Installation of hydraulic lines with drain, valves, connections as per CЖO System Hydraulic Connection Diagram in technological stands STE for Pozitiv-ME 1.2

Installation of Pneumatic lines from dummy antenna to Air Boost System as per Pneumatic Connection Diagram in technological stands STE for Pozitiv-ME 1.2

Installation of ESD Work Bench for arrangement of STE with power supply 50 Hz 220 V with 14 sockets near each table

Installation of ESD Work Bench for arrangement of STE with power supply 400 Hz 220 V 3 ph., 50 Hz 380V; 3 ph., 400 Hz 220V

Installation of ESD Work Bench for arrangement of STE with power supply 400 Hz 220 V 1 ph., 50 Hz 220V

Installation of electric installation works with local ventilation, local lighting, antistatic coating and power supply 50 Hz 220 V

Installation of mechanical works with exhaust ventilation, local lighting, antistatic coating and power supply 50 Hz 220 V

A.K. ENGINEERING COMPANY

Delta Technocare(I) Pvt Ltd

DYNATRIKS INCORPORATION

SMEC Automation Pvt Ltd