Ahmedabad Division : Provision of 3 -meter wide FOB with lift well and lift at kadi station(Composite Tender).

Providing decking system and roof ceiling using decking sheets of BMT (base metal thickness) of 1.2mm with minimum yeild strength of 550MPA having 275 GSM (Gram/ Smt) coating 1 on both sides of sheets confirming to IS 1397 and BS EN 10147: 2000 similar to LYSAGHT SMARTDEKTM 51 of TATA Blue Scope or equivalent system as per manufacturer's specification including profiling, embossing & fixing with all contractor's men, materials, fasteners, fixtures, equipments etc complete.

Supplying, manufacturing, testing and welding with stud guns etc. of normal headed/ round studs shear connections 25mm dia and 120mm length confirming to IS 3935-66 as per specification of RDSO Drg. No. B- 11753-5251 & RDSO - B - 11757-1 along with ferules on top flanges of girders for deck slabs as per the direction / approval of Engineer in charge.

Supplying and fixing 10mm thick toughened glass with all material and labour with all T&P and lead, lift

Supplying and fabricating, integrated tactile plate of 300mm x 300mm on existing floor manufactured as per ISO 23599:2019 standards and certified as per ISO 9001:2015 with warning 36 studs of 35mm x 25mm dia and 4.5mm thickness having anti-slip concentric rings 4 pattern on each studs of stainless steel T 300 Series austenitic 1.4301 grade predominantly non- magnetic plate of 1.5mm thickness, additional specific requirements to a "J" type satin finish. Transverse Ra <0.5 m with clean cut surface finish. Fixing with Philip 10x32mm austenitic 1.4301 grade fasteners and poly toggle anchor as per manufacturer's guidelines. 5 Years manufacturing warranty and installation warranty applicable.

Supplying and fabricating, integrated tactile plate of 300mm x 300mm on existing floor manufactured as per ISO 23599:2019 standards and certified as per ISO 9001:2015 with 4 5 directional strips of 35mm x 25mm x 4.5mm and 280mm long with anti-slip linear pattern on each strips of stainless steel T 300 series austenitic 1.4301 grade predominantly non-magnetic plate of 1.5mm thickness fixed with Philip 10x32mm austenitic 1.4301 grade fasteners and poly toggle anchor. Additional specific requirements to a "J" type satin finish. Transverse Ra <0.5 m with clean cut surface finish. 5 Years manufacturing warranty and installation warranty applicable.

Providing Fabricating & laying of colour coated Galvalume ( Proflex system roofing ) material for self supported roofing system ( Technology similar to Proflex system provided b y M&B engineering Pvt. Ltd., Ahmedabad), Material shall b e of following specification, B M T 0.90mm to 1.00mm, APT 0.95mm Tolerance + / - 0.02mm thick, width 605 m m o r a s dicided b y Railway 6 (Tolerance +/- 2mm), including supplying, loading, transporting, unlopading a n d staking a t site, fabricating and laying with all contractors tools plants, machineries, materials and fixtures labours including all lead and lift and laps/ wastage if any etc. complete. The colour of sheet will be decided by Railway. The rate is also inclusive of designing of roofing system, proof checking and providing execution drawing. Fabrication and installation of self supported roofing technology similar to Profles System provided by M&B engineering Pvt. Ltd., Ahmedabad decided by enineer. Above/

Item Breakup - A-DSR 2023 items

Item Breakup - B-USSOR items only for FOB

All kinds of soils

Providing and laying in position machine cum batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality in RCC raft foundation & Pile cap including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. Note: 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item.

Providing and laying Plain Cement cum Concrete 1:3:6 with graded stone aggregate of 40mm nominal size, in foundation and floors, retaining walls of b r i d g e s including mechanical mixing, vibrating, pumping and bailing out water where ever required with all materials and labour complete but excluding the cost of cement and shuttering as per drawings and technical specifications as directed by Engineer. Centering and shuttering including strutting, propping etc. and removal of form for :

All types of bridge sub-structures, e.g. Sqm pier, abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level Supply and using Cement at Worksite AHMEDABAD DIVISION-ENGINEERING/WESTERN RLY

Ordinary Portland Cement 53 grade of MT approved brands/makes Supply of steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars of Kg grade Fe-500D or more of approved brands/makes. Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality for cast in-situ Prestressed (Post-tensioned) concrete girder / Box girders/Slabs for different s p a n s including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per drawings, specifications and direction of the Engineer in-charge. Note: 1. Payment for Staging, Shuttering, Cement, reinforcement, HTS cables, sheathing, anchorage cones, stressing of cables and grouting of the ducts shall be made extra under relevant items. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons at the stage of Mix Design and in that case deduction shall be made as per relevant item.

With Soffit level up to 9m above Bed cum level

Deduction in rate of 031010, 031020 and cum 031030 for casting of slab in place of Girder for any height AHMEDABAD DIVISION-ENGINEERING/WESTERN RLY Supplying, fabrication, assembling of all types of steel girders of specified spans with structural steel conforming to Q uality "B0" Grade Designation E250 conforming to IS:2062, erection / slewing / end launching of steel girders with cranes or any other approved launching methods as per site conditions (not requiring traffic block) on sub-structure including provision of trolley refuges etc., complete as per approved Q A P and drawings conforming to IRS-B1-2001 and other relevant codes and specifications. Note: 1. Detailed fabrication and erection drawings & launching methodology will be prepared by the contractor and got approved from Railway. 2. The rate is all inclusive including launching in position, complete in all respect except cost of (i) Painting / Metalising; (ii) Bearings & (iii) HSFG bolts which shall be paid extra under relevant item. 3. The payment shall be made on the theoretical weight of main components and gusset plates only. 4. Payment Schedule: (i) Receipt of material at site: 40% (ii) Fabrication of girders: 20% (iii) Erection/Launching: 20% (iv) Completion in all respects: 20%

Plate Girder/Composite Girder (Steel Work)

Supplying and fixing HSFG bolts of any Kg dia and any length with suitable nuts including DTI washers conforming to IRS- B1-2001 for bridges and steel structures with contractors labour, tools and plants and lead and lift etc., complete. Metallizing of steel work of girders with sprayed aluminium after surface preparation by Sand/grit blasting, followed by one coat of etch primer (IS:5666) & one coat of Zinc Chrome primer (IS:104) and two coats of aluminium paint (IS:2339) with all labour, T&P and material as a complete job duly conforming to all relevant specifications and process given under Clause 39 of IRS-B1-2001. Note: Nominal Thickness of sprayed Aluminium coating shall be 150 microns. DFT of Zinc chrome primer shall be 25-30 microns and DFT of each coat of Aluminium paint shall be 12-14 microns.

On new girder during fabrication AHMEDABAD DIVISION-ENGINEERING/WESTERN RLY

Supplying welded and/or bolted and/or riveted steel work in built up sections, trusses and framed work, staging, racks, Height Gauge etc. for Steel Structures other than bridge girders, using RSJ, tees, angles and channels/flats, plates, gussets, round or square bars, cleats, bolts etc., with contractors own steel including cutting, bending, straightening, drilling, riveting, hoisting, fixing, erecting, welding, bolting etc., with Providing stiffeners wherever required as per approved drawing including applying a priming coat of a approved steel primer with all contractor's materials, labour, tools & plants, lead & lift including crossing of tracks if required etc., complete as per specification and as directed by Engineer-in-charge. Note: The payment shall be made on the theoretical weight of main components and gusset plates only. Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

JCB Backhoe Loaders 3DX Plus or similar Hour with minimum 1.10 cum bucket capacity

Hydra or similar tyre mounted Pick-n- Hour Carry crane of 12T capacity for misc. works of handling of material Total 22642042.67

Item Breakup - D-Electrical items( NS)

S&E Total 2752234.00 Supply, installation, testing and commissioning of distribution board having 2 Nos.125 Amp. MCCB FP as incoming & 3 Nos.63 Amp.30mA sensitivity RCBO FP, 3 Nos. 20 Amp. MCB DP as outgoing Item- 2 with energy meter and LED indicating lamps with all associated accessories as per technical specification shown in Para (B) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 62960.00 Supply, installation, testing and commissioning of maintenance free earthing as per technical Item- 3 specification shown in Para (C) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 98944.00 Digging of cable trench 450 x 1000 mm & refilling as per technical specification shown in Para (D) Item- 4 of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 29400.00 AHMEDABAD DIVISION-ENGINEERING/WESTERN RLY Digging of cable trench 450X1000mm in RCC/PCC/Hard soil & refilling as per technical specification Item- 5 shown in Para (E) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 96400.00 Transportation, laying, installation, terminating, testing and commissioning of LT/HT cable of sizes 4 Item- 6 core 10 Sq. mm to 4 core 300 Sq. mm in existing trench, pipe or on structure as per technical specification shown in Para (F) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 58500.00 Supply and laying of half round RCC pipe 100 mm. ID & 1 mtr. length as per technical specification Item- 7 shown in Para (G) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S &E Total 32000.00 Supply, installation, testing and commissioning of LT cable route marker as per technical Item- 8 specification shown in Para (H) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 426.00 Laying of cable in cable tray/air/wall/pole as per technical specification shown in Para (I) of Item- 9 Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 4200.00 Supply, installation, testing and commissioning of 50 mm height and 200 mm width GI hot dip Item- 10 perforated cable tray as per technical specification shown in Para (J) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 84450.00 Supply, Installation, Design, manufacture of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical /Parabolic /Triangular shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm. thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display Item- 11 sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W /Sq. ft. and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided as per technical specification shown in Para (K) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

Square E Foot Total 306200.00 Supply, installation, testing and commissioning of 25 KVAR Automatic Power Factor Correction Item- 12 Panel as per technical specification shown in Para (L) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 125556.00 Supply, installation, testing and commissioning of 63 Amp. MCCB FP with enclosure as per technical Item- 13 specification shown in Para (M) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 22542.00 AHMEDABAD DIVISION-ENGINEERING/WESTERN RLY Supply of materials and provide open/surface wiring of light/fan point up to 6 meter with three numbers 1.5 mm Sq. multi strand, FRLS PVC insulated "ISI Marked" copper wires for phase, neutral & earth in "ISI Marked" medium class P.V.C. conduit pipe of white/cream. The rates of point wiring Item- 14 include providing PVC switchboard with 6 Amps. modular switch with flush mounted cover plate and heavy duty PVC round/square blocks, 3-point ceiling rose, angular base lamp holder etc. as per technical specification shown in Para (N) of Annexure. Note: Beyond 6 meter wiring additional payment will be done through NS item. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 30940.00 Supply and laying in wall & ceiling in concealed manner of ISI marked medium class rigid 25 mm Item- 15 dia. PVC conduit pipe with all accessories as per technical specification shown in Para (O) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 5000.00 Supply, installation, testing and commissioning of 20W LED tube light fitting IP 20 complete with Item- 16 tube and all accessories. The contractor shall provide the mounting arrangement for fittings as required at site and as per technical specification shown in Para (P) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 8300.00 Item- 17 Supply of 120W high bay light as per technical specification shown in Para (P) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S Total 93110.00 Supply of 5 star rated 1200 mm BLDC ceiling fan as per technical specification shown in Para (Q) of Item- 18 Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S Total 7746.00 Fixing, testing and commissioning of fan with supply, fixing, testing and commissioning of EME type Item- 19 fan regulator as per technical specification shown in Para (Q) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 1000.00 Supply, fixing, testing and commissioning of 6 Amps 5 pin modular socket with modular switch on Item- 20 existing board in open manner with all accessories as per technical specification shown in Para (N) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S &E Total 330.00 Supply, fixing, testing and commissioning of 4 Nos. 6 Amps 5 pin modular socket with modular Item- 21 switch for each socket on separate board with all accessories as per technical specification shown in Para (N) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 657.00 Supply, fixing, testing and commissioning of 16 Amps multi pin socket with modular switch on Item- 22 separate board in open manner with all accessories as per technical specification shown in Para (N) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 548.00 Supply of materials and wiring of main/sub main in open manner with 4 mm Sq. size multistrand FRLS PVC insulated ISI marked copper wire for phase, neutral & one number 2.5 Sq. mm copper Item- 23 wire for earth continuity with PVC conduit pipe as per technical specification shown in Para (N) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount AHMEDABAD DIVISION-ENGINEERING/WESTERN RLY

S&E Total 86500.00 Supply of materials and wiring of main/sub main in open manner with 2.5 mm Sq. size multistrand FRLS PVC insulated ISI marked copper wire for phase, neutral & one number 1.5 Sq. mm copper Item- 24 wire for earth continuity with PVC conduit pipe as per technical specification shown in Para (N) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 6100.00 Supply, installation, testing and commissioning of 40 watt weather proof IP 65 LED light fitting with Item- 25 complete accessories. The contractor shall provide the mounting arrangement for fittings as required at site and as per technical specification shown in Para (P) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 127200.00 Supply, installation, testing and commissioning of 3 pin ceiling rose as per technical specification Item- 26 shown in Para (R) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 1800.00 Supply, installation, testing and commissioning of cable junction boxes IP 66 with integrated Item- 27 membranes / metric knockouts size 130 X 180 X 77 mm for 4 to 6 Sq. mm cable as per technical specification shown in Para (S) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 6700.00 Dismantling, transportation, shifting and installation, testing and commissioning of 30 Mtr high Item- 28 mast as per technical specification shown in Para (T) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

E Total 174000.00 Supply, installation, testing and commissioning of penal suitable for 30 Mtr. High Mast with Item- 29 foundation work as per technical specification shown in Para (U) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount

S&E Total 36300.00 Supply, installation, testing and commissioning of double drum gear box and winch suitable for 30 Item- 30 Mtr. High Mast as per technical specification shown in Para (V) of Annexure. S No. Item No Description of Item Unit Qty Rate Amount