Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹46.5 L+₹2.0 L (4.38%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L3₹49.1 L+₹4.6 L (10.2%)Rejected-Finance B S ROAD KOLIBARI TEZPUR 784 001 DIST SONITPUR ASSAM | SONITPUR | ASSAM | 784001 | L3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L4₹49.5 L+₹4.9 L (11.0%)Rejected-Finance GATANGA MISSION CHARALI TEZPUR 784154 ASSAM | SONITPUR | ASSAM | 784154 | L4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L5₹49.5 L+₹5.0 L (11.1%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
Refer Docs
EMD Value
₹83,000
Closing Date
26 Apr 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(N) Tezpur
GE(N) Tezpur Co 99 APO
SPL REPAIRS TO BLDG NO T-25, T-26, T-28, T-32 , NP-05 AND OTHER REV/MINOR WORKS AT NAA UNDER GE (N) TEZPUR
2022_MES_515382_2
GE(N)/TEZ/2022-23/8601
Open Tender
Civil Works
Item Rate
240 days
GE(N) Tezpur
as per tender docus
8 documents required · 8 mandatory
₹500
GE(N) Tezpur
₹83,000
Yes
18 May 2022
19 Apr 2022
28 Apr 2022
19 Apr 2022
26 Apr 2022
19 Apr 2022
60 days
Amount
Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.
Dismantling of sheets (corrugated, semicorrugated, plain etc. of any type) in roof coverings, walls, ridges etc. or of similar types complete in all respect as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws with bitumen washer to truss members of any material, complete in all respect as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in ridge, valley gutter or of similar type, fixed with self tapping screws with bitumen washer to truss members of any material, complete in all respect as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in eaves sheet/ board covering or of similar type, fixed with self tapping screws with bitumen washer including necesary mild steel flats, angles etc and scres for fixing with truss members of any material, complete in all respect as specified and directed.
S&F exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping, of grid size 600 x 600 mm comprising of wall/ cleat angle of size 25x25x0.35 mm and corss tee of size 24x38x0.70 mm with 4 mm dia GI wire as suspender and including 4 mm thick decorative pre-painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/ wooden truss of any type including dismantling of existing false ceiling boards, complete in all respect as specified and directed. (Make:- Eternit, Everest or equivalent)
Dismantling of framed work timber scantlings 40 Sqcm and over in section and in any position, complete in all respect as specified and directed.
M&L for second class hard wood in scantling/ trusses/ framed timeber clean sawn to replace old and decayed timber (including piecing, scarfing etc., of old and new timbers if required) including necessary nut bolt, nails, screws etc. complete in all respect as specified and directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete in all respect as specifified and directed.
S&F GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste, complete in all respect as specified and directed.
M&L for 15 mm thick plastering on wall in cement mortar (1:4) finished even and smooth without using extra cement on one side of lathing or stone masonary surface other than fair face on other side of lathing, complete in all respect as specified and directed.
M&L for 15 mm thick plastering on wall in cement mortar (1:6) finished even and smooth without using extra cement on othr side of lathing or stone masonary surface other than fair face on other side of lathing, complete in all respect as specified and directed.
Taking down cement mortar plaster on brick or stone wall or concrete surfaces etc., including raking out joints, hacking for key, scrubbing down with water etc. complete in all respect as specified and directed.
M&L for 15 mm thick plastering on brick/ stone/ concrete surfaces of wall in cement mortar (CM) 1:4 finished even and smooth without using extra cement complete in all respect as specified and directed.
M&L for 15 mm thick plastering on brick/ stone/ concrete surfaces of wall in cement mortar (CM) 1:6 finished even and smooth without using extra cement complete in all respect as specified and directed.
Supply only water proofing compound (WPC) complete in all respect as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete in all respect all as specified and directed.
M&L for skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, complete in all respect as specified and directed.
M&L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skrting/ dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 10 mm thick rendering in cement mortar (cm) 1:4, complete in all respect as specified and directed.
Taking down chowkats or frames and shutters (without taking off shutters from the frames) not exc 1.5 Sqm each, complete in all respect as specified and directed.
Taking down chowkats or frames and shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each, complete in all respect as specified and directed.
Taking down shutters exc 1.00 sqm but not exc 2.00 sqm each, complete in all respect as specified and directed.
S&F factory made 30 mm thick second class HW glazed and skeleton window/ ventilator shutters, open rebated and prepared to receive glass gauge etc (with sash bars), edges of framing plain chamfered or rounded. Fitted with cut and mitrred beads for secring glass, wire mesh etc; sizes of members of shtuters as specified in SSR Part I, section 8, clause 8.24(b), complete in all respect as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty or in wooden frames with new wooden beadings in square/ rectangular or of any shape or in steel window not exc 0.5 sqm in each pane etc. complete in all respect as specified and directed.
S&F aluminium anodised, barrel tower bolts of extured section and fixed 100 mm, complete in all respcet as specified and directed.
S&F aluminium handle cast tyep anodised, 100 mm size, complete in all respcet as specified and directed.
S&F 100 mm size of butt hinges stainless steel complete in all respect as specified and directed.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc or for window grill or appd size and shape including fixing with alumium 'U' shape section for fixing etc. compelte in all respect as specified and directed (powder coated shall be minimum 50 micron).
S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessry joinin cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised alumium snap beading screws etc. complete in all respect as specified and directed (powder caoted shall be minimum 50 micron).
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete in all respcet as specified and directed.
S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing, complete in all respect as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel haivng a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for top rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the M.S. frame weloded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing, complete in all respcet as specified and directed.
S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty as reqired in square not exc 0.5 sqm in each pane, complete in all respect as specified and directed.
S&F 75 mm size of MS butt hinges complete in all respect as specified and directed.
S&F Aluminium, anodised, bareel tower bolts of extruded section and fixed, 125 mm length, complete in all respect as specified and directed.
S&F Aluminium handles, cast type, anodised 125 mm size, complete in all respect as specified and directed.
S&F in repair, 12 mm dia bolt, 250 mm long, aluminum anodised sliding door bolt with hasp and staple (bolt type), complete in all respect as specified and directed.
S&F in repair, 300 mm long, mild steel ordinary rat tail rod pattern springs, including roller and roller plate including necessary welding if required, complete in all respect as specified and directed.
M&L for mild steel (MS) work such as in guard bars, grills, grating, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; and of similar type of work conforming to Fe 290, Gde E-165, complete in all respect as specified and directed.
S&F three layered white in colour rotational moulded made out from LLDPE material water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) including three tank nipples of 20 mm nominal bore dia hoisted and fixed in position, all as pspecified in SSR part I, complete in all respect as specified and directed.
S&F PTMT ball valve high pressure 20 mm bore with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, complete in all respect as specified and directed. (Min weight 15 mm - 142 gms/ 20 mm - 210 gms/ 25 mm - 455 gms)
S&F 15 mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including necessary cutting, chsing etc. complete in all respect as specified and directed.
S&F 20 mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including necessary cutting, chsing etc. complete in all respect as specified and directed.
S&F 20 mm bore of Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed, complete in all respect as specified and directed.
S&F in repair short body bib taps with wall flange of 15 mm bore, fancy type CP finish cast copper allooy with crutch handle screwwd down for iron pipes complete in all respect as specified and directed. (Note:- if small piece of pipe required for connection with fitting beyond socket/ elbow etc. CP finish copper alloy extension nipple will be used without any extra cost)
S&F in repair long body bib taps with wall flange of 15 mm bore, fancy type CP finish cast copper allooy with crutch handle screwwd down for iron pipes complete in all respect as specified and directed. (Note:- if small piece of pipe required for connection with fitting beyond socket/ elbow etc. CP finish copper alloy extension nipple will be used without any extra cost)
S&F in repair Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete, in all respect as specified and directed.
S&F CP finish cast copper alloy, two way bib cock complete in all respect as specified and directed.
S&F in repairs Stop valves of 15 mm bore male/ female threaded, fancy type CP finish, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete in all respect as specified and directed.
S&F 15 mm dia bore cast copper alloy, chromium plated shower roses with swivel joints including fixing to steel/ CPVC pipe/ fittings or of union complete all as specifeid and directed.
S&F in repair vitreous china wash down water closet pan (padestal pattern) white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe), complete in all respect as specified and directed.
S&F in repair white vitreous china squatting pan of size 580 x 440 mm ORISSA Pattern with P or S trap bedded in cement concrete exclusvie flushing cistern and flush pipe) with integral foot rests complete all as specifed and directed.
S&F PVC valveless, syphonic action type flushing cistern 10 ltr capacity, low level, white, wtih inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC, 32 mm dia, complete in all respect as specified and directed.
S&F in repair wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15 mm bore dia fancy type CP finish pillar tap, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed.
S&F in repair cast copper alloy CP finished, central hole basin mixer with extruded casted spout with 450 mm long braided hoses complete in all respect as specified and directed.
S&F in repair, 32 mm dia bore of pipe waste fittings, brass, chromimum plated for glazed ware sinks, wash hadn basin, etc. wtih long screwed shanks and fly nuts, flange end bedded in red lead cement including 32 mm bore dia PVC waste pipe complete in all respect as specified and directed.
S&F in repair, 32 mm dia bore PVC waste flexible pipe suitable for kitchen sink, wash hand basin complete in all respect as specified and directed.
S&F 350 x 450 mm size, PVC mirror cabinet complete in all respect as specified and directed.
Supply and fixed PVC soap dish complete in all respect as specified and directed.
Supply and fixed cast copper alloy, CP finish tubular towel rail, D type, 60 cm long between flanges complete in all respect as specified and directed.
S&F tower ring of copper alloy CP finished complete in all respect as specified and directed. Make:- Jaquar cat part No AEC-1121, Make Hindware cat part No F450023
S&F in repair sheet glass glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with brass chromium plated bracket guard and railing 60 cm long, complete in all respect as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors of any description (below or above ground level), complete in all respect as specified and directed.
M&L for 75 mm thick PCC, type C-2, 1:3:6 (using 40 mm crushed and graded stone aggregate) as in plinth protection and finished surface even and smooth without using extra cement complete in all respect as specified and directed.
M&L for 100 mm thick PCC, type B-2, 1:2:4 (using 40 mm crushed and graded stone aggregate) as in floor/ hardstanding making finished even and fair without using extra cement, complete in all respect as specified and directed.
M&L for Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement with pigment, set jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in cement mortar (CM) 1:4, complete in all respect as specified and directed.
M&L for brick work with sub-class "B" old size bricks of class designation (CD) 75, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete in all respect as specified and directed.
M&L for brick work with sub-class "B" old size bricks of class designation (CD) 75, straight or curved on plan to any radius in half brick thick walls built in cement mortar (CM) 1:4, complete in all respect as specified and directed.
S&F 110 mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete in all respect as specified and directed.
S&F 75 mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete in all respect as specified and directed.
S&F 110 mm bore of PVC (SWR) bends any radius, complete in all respect as specified and directed.
S&F 75 mm bore of PVC (SWR) bends any radius, complete in all respect as specified and directed.
S&F 110 mm bore of PVC (SWR) junction single, (Single T) equal or unequal, complete in all respect as specified and directed.
S&F PVC (SWR) 110 mm internal bore cowl, complete in all respect as specified and directed.
S&F in PVC (SWR) grating for floor/ Nahani trap of size 150 mm x 150 mm (with or without wste hole) including jointing with cement and necessary cutting for size complete in all respect as specified and directed.
S&F mild steel sections (Beam, tee, angle, channel, tubular/ hollow section or flat sections) in roof tursses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, independent fixing with welding etc. including distance pieces, cleats etc. using FE-410W (Grade E-250 quality "A") complete in all respect as specified and directed.
M&L for preparing of old decorated wooden surface with premixed wood filler used as putty for wood work, of any description, not otherwise described, overe 10 cm width or girth, and applying two coats of synthetic enamel paint, complete in all respect as specified and directed.
M&L for preparing of new undecorated wooden surface with premixed wood filler used as putty for wood work, of any description, not otherwise described, overe 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of pink primer, complete in all respect as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of weather coat over 3 mm thick wall care putty over a coat of primer including rubbish and all necessary preparation, complete in all respect as specified and directed.
M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 3 mm thick (in two layers), wall care putty, complete in all respect as specified and directed.
M&L for complete removal of existing treatment on wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 3 mm thick (in two layers) wall care putty, complete in all respect as specified and directed.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep geeting out in soft/loose soil.
Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete in all respect as specified and directed
M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate) as in foundaion and mass filling complete in all respect as specified and directed
Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; complete in all respect as specifified and directed.
Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc. complete in all respect as specifified and directed.
Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc.; complete in all respect as specifified and directed.
Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in sun shade,chajja,cantilever section etc. complete in all respect as specified and directed.
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished flat surface of concrete complete in all respect as specifified and directed.
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished flat surface of concrete complete in all respect as specifified and directed.
M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. in rough finished flat surface of concrete complete in all respect as specifified and directed.
M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work in rough finished flat surface of concrete complete in all respect as specifified and directed.
M & L for formwork to soffits of floor or roof etc. in rough finished flat surface of concrete complete in all respect as specifified and directed.
M & L for deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed.
M & L for deformed TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed.
Spreading and levelling to under flooring, in layers n. exc. 25 cm thick and well ramming including watering as required of excavated loose soil, as retreived against respective excavation item complete in all respect as specifified and directed.
Providing and laying 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork using type B-0, 1:2:4 concrete (using 12.5mm nominal size crushed and graded stone aggregate) mixed with water proofing compound complete in all respect as specifified and directed. (Water proofing compound shall be measured & paid separately under supply only item)
Providing and laying 75mm thick cement concrete type C-2, 1:3:6 (using 40mm nominal size crushed and graded stone aggregate) and finished even and fair in base concrete complete in all respect as specifified and directed.
M&L for 18-20mm thick machine cut kota stone slab flooring of size not less than 500X500mm over 20mm thick cement mortar (1:6) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M & L for 18-20mm thick machine cut kota stone slab of size not less than 500X500mm in riser of steps, skirting , dado and pillar over 15mm thick cement mortar (1:4) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and directed.
Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete in all respect as specified and directed.
M & L 10mm thick plastering on brick/stone/concrete surafces of ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete in all respect as specifified and directed.
M & L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed
S&F steel windows with glazing bars, side hung shutters with projecting type hinges, including steel handle, and steel peg stay dovetailed or welded complete all as specified and directed.
S&F steel windows without glazing bars, side hung shutters with projecting type hinges, including steel handle, and mild steel flat strip for fixing wire mess with nut and bolt, dovetailed or welded complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixing with beads (ISI Marked) complete all as specified and directed.
M&L for Preparation of undecorated plastered or unplastered surface of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for Preparation of undecorated plastered or unplastered surface of wall and applying two coats of white wash complete all as specified and directed.
M & L for writing letters or figures (block roman, Italic or Indian) through synthetic enamel paint of 30cm high upto 12m height building over square or round base painting and necessary scafolding arrangement complete in all respect as specified and directed.
Providing and laying for cement concrete in coping, hold fasts using type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) or of similar work, etc. including necessary form work complete in all respect as specifified and directed.
S & F 1.25mm thick lath thickness, new gear operated type including bevel gear box and crank handle steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as position as indicated as specifed in SSr Part I complete in all respect as specified and directed.
S& F to rolling shutter, safety lever locks mild steel with 4 levers and keys complete in all respect as specified and directed.
S& F plates (Plain or chequered) channels, square cut or notched (Ordinary and counter sunk) forming holes, without any attachment fixed in position using Fe 410-W (Gde E-250) quality "A" complete in all respect as specified and directed.
Material and labour for preparation of new undecorated painted steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed.
M&L for framed work as in frames and shutter of doors, window or gates of angle, Z section or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering for doors, windows etc to be prepared for hanging or sliding with and including either hooks and required number of hinges or steel hanging guides) and hanging also fasterning and fixing using Fe 410W (Gde-E-250) quality A complete in all respect as spefified and directed.
S&F 8mm dia rawl plug/dash fasiner of mild steel fixed in brick or concrete surface with electric drill to fix steel window complete in all respect as specified and directed.
S&F Stainless steel wire cloth 0.32mm nominal dia of wire and average width of aperture 1.80mm and fixed in mild steel window complete in all respect as specifed and directed.
E/M Portion
Taking down carefully aluminium/copper point wiring of one light , fan, socket power point or buzzer controlled by one switch complete including fitting/fixtures such as switches, ceiling roses, holder, socket, light fitting etc; and making good disturbed surfaces of walls, ceilings etc all as specified.
Taking down old burnt/unserviceable main switches and DB's including MCB SP/SPN/TPN of any make and any size, wooden board, junction box and making good distrubed surfaces of wall all as directed.
M & L for point wiring with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping of 25 mm wide, with double locking type, including all accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, PVC terminal box and PVC board making good disturbed surface to match with the existing surface complete all as directed
One light point/fan point/bell point controlled by one switch.
One 3 pin switch socket combination 5 Amps on independent board.
One 3 pin switch socket combination 15 Amps on independent board with elect wiring 2.5 Sqmm & earth FRLSH cable of 2.5 Sqmm.
One 3 pin switch socket combination 15 Amps on independent board with elect wiring 4 Sqmm & earth FRLSH cable of 4 Sqmm
M&L for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed.
M&L for switch socket combination 2 in one, 5/6 Amps 240 volts flush type complete all as specified and directed.
M&L for switch socket combination 3 pin 16 Amps flush type complete all as specified and directed.
S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 10 KA 'C' Curve complete all as specifed and directed.
S&F ceiling rose Polycarbonate type three terminals complete all as specified and directed.
S & F Lamp holder , PVC / Polycarbonate type complete all as specified and directed.
S & F switch bell push flush type 5 Amps , AC , 220/230 Volt complete all as specified and directed.
S & F Call bell Ding dong type , AC , 220/230 volt complete all as specified and directed.
S & F step type electronic fan regulator 120 watt complete all as specified
S&F in of Recess/surface mounted 2' x 2' LED flat light 34/36W luminaire with comfortable glare free soft illimination not less than 5700K with surge protected led driver complete all as specified and as directed.
S&F LED 20 Watt tube light fitting (T8 type) , including LED retrofit tube 20 W , 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative box type batten suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed.
Supply and Fixing LED street/ security light, made of pressure die-cast housing with toughned glass and induvidual high power LEDs with secondary optics, IP65 protection and impact resistance of IK07 with driver etc, of capacity 25 W LED and including suitable GI bracket & clamp its connection with 3/2 core 2.5 sqmm stranded PVC Insulated and PVC sheathed Al conductor wire from junction box to street light fitting or over head conductor complete all as specified and directed.
Taking down ceiling fan any type/ size from hook and dismantling cable and blades and bring in to contractor store for repair and hanging ceiling fan in position after repair, greasing painting etc. with existing flexible copper cable complete all as directed. (rewinding of fan, painting and spare parts required shall be incl quoted rates)
Taking down exhaust fan any type/ size from wall and dismantling sealing cable and dismantling blades and bring in to contractor store for repair and re-fixing exhaust fan in position after repair, greasing painting etc. with existing flexible copper cable complete all as directed. (rewinding of fan, painting and spare parts required shall be incl quoted rates)
M&L for Sub main wiring with two single core PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor, FRLS cable drawn in but including PVC casing capping not less than 25 mm ISI marked including all accessories of casing caping as approved by EIC including PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly including taking out old u/s complete all as specified and directed.
S&F sheet metal enclosure for MCB DB TPN 4 way, double door with 63 Amp , IP 54 metal door, 25 KA , complete all as specified and directed.
S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 Way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including taking out old and U/s complete all as specified and directed
S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 4 Way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including taking out old and U/s complete all as specified and directed
S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed .
S&F MCB SPN 32 amps 10 KA , 'C' Curve including connection with suitable size aluminium/copper lugs complete all as specified and directed .
S&F MCB TPN 63 amps 10 KA , 'C' Curve including connection with suitable size aluminium/copper lugs complete all as specified and directed
S & F off load changeover switch with enclouser rated voltage 415 v-AC , 50 Hz , 200 Amp rating , four pole type fixed to wall incl connections complete all as directed.
DRISTEE ASSOCIATES
Anil Kumar Sarmah
M/S MOHANPASARI
M/s Brahamaputra Wood Industries
M/S Barua Enterprise
M/S Deep-Jeet
M/S S.K. Sharma
MD. LATIFUL AHMED HUSSAIN
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .