Loading…
Loading…
Tender Value
₹10.1 Cr
EMD Value
₹10.1 L
Closing Date
6 Jul 2026, 6:00 pm
Superintending Engineer, Project Implementation Unit, Zone-6, Vadodara
Construction of New Building for General Nursing Hostel at General Hospital Santrampur Ta. Santrampur, Dist. Mahisagar
314095
2026-27/37/01
Open
Civil Works - Buildings
Panchmahal
1 document required · 1 mandatory
₹18,000
PIU-GENERAL FUND A/C 11-114-Gandhinagar
₹10.1 L
13 Jun 2026
13 Jun 2026
13 Jun 2026
6 Jul 2026
13 Jun 2026
Name of Work: Construction of New Building for General Nursing Hostel at General Hospital Santrampur Ta. Santrampur,
Dist. Mahisagar
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Excavation for foundation upto 1.5 m depth including Rupees Four
sorting out and stacking of useful materials and Hundred Sixty Five
disposing off the excavated stuff upto 50 Meter lead. And Paise Fourteen
(C) Hard Murrum Only
Excavation for foundation upto 1.5 m depth including Rupees Five
sorting out and stacking of useful materials and Hundred Thirty Two
disposing off the excavated stuff upto 50 Meter lead. And Paise Ninety
(C) Soft rock not required blasting One Only
Excavation for foundation for depth from 1.5 m to 3.0 Rupees Five
m including sorting out and stacking of useful Hundred Fifty Five
materials and disposing off the excavated stuff upto 50 And Paise Forty
Meter lead. (C) Soft rock not required blasting Nine Only
Excavation for foundation for depth from 3.0 m to 5.0 Rupees Five
m including sorting out and stacking of useful Hundred Ninety
materials and disposing off the excavated stuff upto 50 Nine And Paise
Meter lead. (D) Soft rock not requiring Blasting Thirty Nine Only
Filling in plinth with sand under floors including
Hundred Seventy
5 125.00 watering, ramming, consolidating and dressing etc. Cmt 479.80
complete (Upto 10 ton)
Filling available excavated earth (excluding rock) in Rupees One
trenches, plinth, sides of foundations etc. in layers not Hundred Thirty Six
exceeding 20 cm. in depth consolidating each And Paise Ninety
deposited layer by ramming and watering Two Only
Filling in plinth with murrum or selected soil in layers
7 669.00 of 20 cm. thickness including watering, ramming and Cmt 295.15
consolidating etc. Complete.
Provdg. & laying cement concrete 1:2:4 (1cement:2 Rupees Three
corse sand :4 hand broken stone aggregate 20 mm Thousand Eight
nominal size) and curing complete excluding cost of Hundred And Paise
form work in (A) Foundation and plinth Thirty Only
Providing and laying cement concrete 1:3:6 (1-Cement
: 3- coarse sand : 6- hand broken stone aggregates
Thousand Ninety
9 237.00 mmnominal size) and curing complete excluding cost Cmt 3,092.22
of formwork in (A) Foundation and Plinth (more than
Twenty Two Only
Providing, laying, spreading and compacting graded
stone aggregates to Wet Mix Macadam in150 mm
thickness as per MORT & H specification including
premixing the material with water at OMC in
mechanical mix plant, carraige of mixed material by
10 218.00 Cmt 860.61 Hundred Sixty And
tippers to site, laying in uniform layers with paver or
Paise Sixty One Only
motor grader in sub base/ base course on well
prepared surface and compacting with vibratory roller
to acheive the desired density.complete as per MORT
Providing, laying controlled cement concrete M
and curing complete including the cost of form work Rupees Five
(rates for centering, shuttering, formwork staging Thousand Three
scaffolding for considering up to 4.50M height) but Hundred Seven And
excluding reinforcement for reinforced concrete work Paise Fifty Five Only
in: (A) Footing
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
12 111.00 Cmt 7,321.49 Hundred Twenty
scaffolding for considering up to 4.50M height) but
One And Paise Forty
excluding reinforcement for reinforced concrete work
in: (C) Plinth Beam
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
13 118.00 Cmt 5,287.35 Hundred Eighty
scaffolding for considering up to 4.50M height) but
Seven And Paise
excluding reinforcement for reinforced concrete work
Thirty Five Only
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
14 30.00 Cmt 8,268.17 Hundred Sixty Eight
scaffolding for considering up to 4.50M height) but
And Paise Seventeen
excluding reinforcement for reinforced concrete work
in: (B) Column (i) up to plinth level
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
15 39.00 Cmt 8,268.17 Hundred Sixty Eight
scaffolding for considering up to 4.50M height) but
And Paise Seventeen
excluding reinforcement for reinforced concrete work
in: (B) Column (i) up to Ground Floor slab level
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
16 38.00 Cmt 8,309.27 Hundred Nine And
scaffolding for considering up to 4.50M height) but
Paise Twenty Seven
excluding reinforcement for reinforced concrete work
in: (B) Column (i) First Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
17 38.00 Cmt 8,351.69 Hundred Fifty One
scaffolding for considering up to 4.50M height) but
And Paise Sixty Nine
excluding reinforcement for reinforced concrete work
in: (B) Column (i) Second Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
18 38.00 Cmt 8,393.10 Hundred Ninety
scaffolding for considering up to 4.50M height) but
Three And Paise Ten
excluding reinforcement for reinforced concrete work
in: (B) Column (i) Third Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
19 14.00 Cmt 8,434.51 Hundred Thirty
scaffolding for considering up to 4.50M height) but
Four And Paise Fifty
excluding reinforcement for reinforced concrete work
in: (B) Column (i) Fourth (Terrace) Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
20 200.00 Cmt 8,329.47 Hundred Twenty
scaffolding for considering up to 4.50M height) but
excluding reinforcement for reinforced concrete work
Forty Seven Only
in: (D) RCC Wall (i) up to Ground Floor slab level
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
21 9.00 Cmt 8,370.88 Hundred Seventy
scaffolding for considering up to 4.50M height) but
And Paise Eighty
excluding reinforcement for reinforced concrete work
in: (D) RCC Wall (i) First Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
22 9.00 Cmt 8,412.29 Hundred Twelve
scaffolding for considering up to 4.50M height) but
And Paise Twenty
excluding reinforcement for reinforced concrete work
in: (D) RCC Wall (i) Second Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
23 9.00 Cmt 8,453.70 Hundred Fifty Three
scaffolding for considering up to 4.50M height) but
And Paise Seventy
excluding reinforcement for reinforced concrete work
in: (D) RCC Wall (i) Third Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
24 9.00 Cmt 8,495.11 Hundred Ninety
scaffolding for considering up to 4.50M height) but
excluding reinforcement for reinforced concrete work
in: (D) RCC Wall (i) Fourth (Terrace) Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
25 81.00 Cmt 6,893.25 Hundred Ninety
scaffolding for considering up to 4.50M height) but
Three And Paise
excluding reinforcement for reinforced concrete work
Twenty Five Only
in: (E) Floor Beam (i) Ground Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
26 103.00 Cmt 6,934.66 Hundred Thirty
scaffolding for considering up to 4.50M height) but
Four And Paise Sixty
excluding reinforcement for reinforced concrete work
in: (C) RCC Floor Beam (i) First FLoor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
27 103.00 Cmt 6,976.07 Hundred Seventy
scaffolding for considering up to 4.50M height) but
Six And Paise Seven
excluding reinforcement for reinforced concrete work
in: : (C) RCC Floor Beam (i) Second FLoor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work Rupees Seven
(rates for centering, shuttering, formwork staging Thousand
scaffolding for considering up to 4.50M height) but Seventeen And Paise
excluding reinforcement for reinforced concrete work Forty Eight Only
in: : (C) RCC Floor Beam (i) Third FLoor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work Rupees Seven
(rates for centering, shuttering, formwork staging Thousand Fifty Eight
scaffolding for considering up to 4.50M height) but And Paise Eighty
excluding reinforcement for reinforced concrete work Nine Only
in: : (C) RCC Floor Beam (i) Fourth (Terrace) FLoor
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
30 59.00 Cmt 6,825.48 Hundred Twenty
scaffolding for considering up to 4.50M height) but
Five And Paise Forty
excluding reinforcement for reinforced concrete work
in: (C) RCC Lintel (i) For Ground Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
31 58.00 Cmt 6,867.02 Hundred Sixty
scaffolding for considering up to 4.50M height) but
Seven And Paise
excluding reinforcement for reinforced concrete work
in: (C) RCC Lintel (i) For First Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work Rupees Six
(rates for centering, shuttering, formwork staging Thousand Nine
scaffolding for considering up to 4.50M height) but Hundred Eight And
excluding reinforcement for reinforced concrete work Paise Fifty Six Only
in: (C) RCC Lintel (i) For Second Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work Rupees Six
(rates for centering, shuttering, formwork staging Thousand Nine
scaffolding for considering up to 4.50M height) but Hundred Fifty And
excluding reinforcement for reinforced concrete work Paise Ten Only
in: (C) RCC Lintel (i) For Third Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
34 6.00 Cmt 6,991.64 Hundred Ninety One
scaffolding for considering up to 4.50M height) but
And Paise Sixty Four
excluding reinforcement for reinforced concrete work
in: (C) RCC Lintel (i) For Fourth (terrace) Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work Rupees Six
(rates for centering, shuttering, formwork staging Thousand Six
35 11.00 scaffolding for considering up to 4.50M height) but Cmt 6,611.46 Hundred Eleven
excluding reinforcement for reinforced concrete work And Paise Forty Six
in: (C) RCC Weathershed (i) up to Ground Floor slab Only
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
36 11.00 Cmt 6,652.87 Hundred Fifty Two
scaffolding for considering up to 4.50M height) but
And Paise Eighty
excluding reinforcement for reinforced concrete work
in: (C) RCC Weathershed (i) First Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
37 11.00 Cmt 6,694.28 Hundred Ninety
scaffolding for considering up to 4.50M height) but
excluding reinforcement for reinforced concrete work
Twenty Eight Only
in: (C) RCC Weathershed i) Second Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
38 11.00 Cmt 6,735.69 Hundred Thirty Five
scaffolding for considering up to 4.50M height) but
And Paise Sixty Nine
excluding reinforcement for reinforced concrete work
in: (C) RCC Weathershed i) Third Floor
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
39 6.00 Cmt 6,777.10 Hundred Seventy
scaffolding for considering up to 4.50M height) but
Seven And Paise Ten
excluding reinforcement for reinforced concrete work
in: (C) RCC Weathershed i) Fourth (Terrace) Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
40 173.00 Cmt 7,126.56 Hundred Twenty Six
scaffolding for considering up to 4.50M height) but
And Paise Fifty Six
excluding reinforcement for reinforced concrete work
in: (C) RCC Slab i) up to Ground Floor slab level
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
41 109.00 Cmt 7,167.97 Hundred Sixty
scaffolding for considering up to 4.50M height) but
Seven And Paise
excluding reinforcement for reinforced concrete work
Ninety Seven Only
in: (C) RCC Slab i) First Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
42 109.00 Cmt 7,209.38 Hundred Nine And
scaffolding for considering up to 4.50M height) but
Paise Thirty Eight
excluding reinforcement for reinforced concrete work
in: (C) RCC Slab i) Second Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
43 109.00 Cmt 7,251.80 Hundred Fifty One
scaffolding for considering up to 4.50M height) but
And Paise Eighty
excluding reinforcement for reinforced concrete work
in: (C) RCC Slab i) Third Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
44 6.00 Cmt 7,293.21 Hundred Ninety
but excluding reinforcement for reinforced concrete
Three And Paise
work in : (C) RCC Slab i) Fourth (Terrace) Floor
Twenty One Only
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
45 7.00 Cmt 6,279.88 Hundred Seventy
scaffolding for considering up to 4.50M height) but
excluding reinforcement for reinforced concrete work
Eighty Eight Only
in: (C) RCC Stair Case i) up to Ground Floor slab level
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
46 7.00 Cmt 6,316.37 Hundred Sixteen
scaffolding for considering up to 4.50M height) but
And Paise Thirty
excluding reinforcement for reinforced concrete work
in: (C) RCC Stair Case i) First Floor
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
47 7.00 Cmt 6,399.45 Hundred Ninety
scaffolding for considering up to 4.50M height) but
excluding reinforcement for reinforced concrete work
Forty Five Only
in: (C) RCC Stair Case i) Second Floor
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing, laying controlled cement concrete M
and curing complete including the cost of form work
(rates for centering, shuttering, formwork staging
48 7.00 Cmt 6,524.07 Hundred Twenty
scaffolding for considering up to 4.50M height) but
excluding reinforcement for reinforced concrete work
in: (C) RCC Stair Case i) Third Floor
Providing TMT Bar FE 500D reinforcement for R.C.C. Rupees Seventy
49 284144.00 work including bending, binding and placing in Kg. 77.29 Seven And Paise
position complete upto floor two level Twenty Nine Only
Providing and position PVC Sleeves in RCC elements
like walls slabs beams etc. of 10 Kg./cm2 UPVC Pipes
Hundred Seventy
50 40.00 and diameter of taking out service pipelines cables Each 172.04
Two And Paise Four
road infrasturcture work etc. upto 1 Mtr. length for all
floors/ all levels/ all heights. a) 50mm dia.
Hundred Eighty And
51 40.00 b) 75mm dia. Each 280.23
Paise Twenty Three
Nine And Paise Five
Applying general insecticide pest control treatment to
floors, cupboards etc including labour materials etc.
complete. Using Imidacloprid 30.5 SCas Per IS 6313 Rupees Forty Five
53 783.00 part-II (0.075% concentration by mass) is Smt 45.81 And Paise Eighty
recommended 10.5ml chemical diluted with 5 liters of One Only
water application 0.5 Liter chemical/Smt of surface is
recommended as per I.S.
Brick work using common burnt clay building bricks Rupees Four
having crushing strength not less than 35 Kg./Sq. Cm. Thousand Two
54 70.00 in foundation and plinth in cement mortar 1:6 (1 Cmt 4,214.33 Hundred Fourteen
cement : 6 fine sand) Up to Plinth level. (B) And Paise Thirty
Conventional (more than 10 ton) up to plinth Three Only
Brick work using common burnt clay building bricks Rupees Four
having crushing strength not less than 35 Kg./Sq. Cm. Thousand Two
55 80.00 in foundation and plinth in cement mortar 1:6 (1 Cmt 4,214.33 Hundred Fourteen
cement : 6 fine sand) Up to Plinth level. (B) And Paise Thirty
Conventional (more than 10 ton) (A) Ground Floor. Three Only
Masonary work using Aerated light weight concrete
block having crushing strength not less than
Kg./sqcm for super structure above plinth level upto
56 381.00 Cmt 4,922.47 Hundred Twenty
floor two level in cement mortar 1:5 (1 cement : 5 fine
sand) complete as per Technical Specification (A)
Forty Seven Only
Masonary work using Aerated light weight concrete
block having crushing strength not less than
Kg./sqcm for super structure above plinth level upto
57 384.00 Cmt 4,964.58 Hundred Sixty Four
floor two level in cement mortar 1:5 (1 cement : 5 fine
And Paise Fifty Eight
sand) complete as per Technical Specification (b) First
Masonary work using Aerated light weight concrete
block having crushing strength not less than
Kg./sqcm for super structure above plinth level upto
58 384.00 Cmt 5,006.70 Thousand Six And
floor two level in cement mortar 1:5 (1 cement : 5 fine
Paise Seventy Only
sand) complete as per Technical Specification (c)
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Masonary work using Aerated light weight concrete
block having crushing strength not less than 35 Rupees Five
Kg./sqcm for super structure above plinth level upto Thousand Forty
floor two level in cement mortar 1:5 (1 cement : 5 fine Eight And Paise
sand) complete as per Technical Specification (c) Eighty Two Only
Masonary work using Aerated light weight concrete
block having crushing strength not less than 35 Rupees Five
Kg./sqcm for super structure above plinth level upto Thousand Ninety
floor two level in cement mortar 1:5 (1 cement : 5 fine And Paise Ninety
sand) complete as per Technical Specification (d) Four Only
Fourth (Terrace) Floor
Providing & fixing 15 mm cement plaster in single coat
on brick/concrete wall for interior plastering finished Rupees Two
61 2050.00 even and smooth in cement mortor 1:4 (1 cement : 4 Smt 226.01 Hundred Twenty Six
coarse sand) including floating coat of neat cement And Paise One Only
including finishing etc complete. (a) Ground Floor
Providing & fixing 15 mm cement plaster in single coat
on brick/concrete wall for interior plastering finished
Hundred Forty Nine
62 1747.00 even and smooth in cement mortor 1:4 (1 cement : 4 Smt 249.90
And Paise Ninety
coarse sand) including floating coat of neat cement
including finishing etc complete. (b) First Floor
Providing & fixing 15 mm cement plaster in single coat
on brick/concrete wall for interior plastering finished
Hundred Seventy
63 1747.00 even and smooth in cement mortor 1:4 (1 cement : 4 Smt 273.80
Three And Paise
coarse sand) including floating coat of neat cement
including finishing etc complete. (c) Second Floor
Providing & fixing 15 mm cement plaster in single coat
on brick/concrete wall for interior plastering finished
64 1747.00 even and smooth in cement mortor 1:4 (1 cement : 4 Smt 297.70
Seven And Paise
coarse sand) including floating coat of neat cement
including finishing etc complete. (d) Third Floor
Providing & fixing 15 mm cement plaster in single coat
on brick/concrete wall for interior plastering finished Rupees Three
even and smooth in cement mortor 1:4 (1 cement : 4 Hundred Twenty
coarse sand) including floating coat of neat cement One And Paise Fifty
including finishing etc complete. (d) Fourth (Terace) Nine Only
10mm th cement plaster in single coat on fair side of
brick/ concrete wall for interior plastering upto floor Rupees One
two level finished even and smooth in C M 1:4 (1 Hundred Eighty Two
cement 4 coarse sand) including floating coat of neat And Paise Ninety
cement including finishing etc complete. (A) Ground One Only
10mm th cement plaster in single coat on fair side of
brick/ concrete wall for interior plastering upto floor
Hundred Eight And
67 1097.00 two level finished even and smooth in C M 1:4 (1 Smt 208.97
Paise Ninety Seven
cement 4 coarse sand) including floating coat of neat
cement including finishing etc complete. (b) First Floor
10mm th cement plaster in single coat on fair side of
brick/ concrete wall for interior plastering upto floor Rupees Two
two level finished even and smooth in C M 1:4 (1 Hundred Thirty Five
cement 4 coarse sand) including floating coat of neat And Paise Three
cement including finishing etc complete. (c) Second Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
10mm th cement plaster in single coat on fair side of
brick/ concrete wall for interior plastering upto floor Rupees Two
two level finished even and smooth in C M 1:4 (1 Hundred Sixty One
cement 4 coarse sand) including floating coat of neat And Paise Eight
cement including finishing etc complete. (c) Third Only
10mm th cement plaster in single coat on fair side of
brick/ concrete wall for interior plastering upto floor Rupees Two
two level finished even and smooth in C M 1:4 (1 Hundred Eighty
cement 4 coarse sand) including floating coat of neat Seven And Paise
cement including finishing etc complete. (d) Fourth Fourteen Only
(Terrace) Floor
20 mm. thick sand face cement plaster Gutkha finish
on walls up to any height and above ground level
Hundred Forty Five
71 4128.00 consisting of 12 mm. thick backing coating of C.M. 1:3 Smt 345.75
And Paise Seventy
(1 cement : 3 sand) and 8 mm. thick finishing coat in
C.M. 1:1 (1 cement :1 sand) etc. complete.
Providing 20 mm thick double coat mala cement
plaster on interior brick/ concrete work for plastering
comprising of base coat of 12 mm thick cement plaster
72 1408.00 in cement mortar (1 Cement : 4 coarse sand) in rough Smt 283.95
Three And Paise
finishing and 8 mm thick top coat of cement mortar
Ninety Five Only
1:2 (1 Cement : 2 Coarse sand) finished with trovel
including scaffolding curing etc. complete.
Providing and applying 2mm thick Texture Plaster
Terre Plaette (Specturm, Coral or equivalent)
incoprating fine fillments made of polymer and Rupees Four
aggergating natural stone powder with making Hundred Forty
grooves on base coat of 20 mm thick smooth mala Three And Paise
plaster (which paid seperately) etc. complete.Colour Thirty Nine Only
and shade as approved by Architect/ Engineer in
charge for at all floor,all height.
Providing and fixing Chicken mesh jali (22 gauge) at
the junction of 2 different surfaces of different Rupees Three
material component at the time of plastering to Hundred Sixty Eight
prevent cracking in plaster surface as and where And Paise Sixty Five
directed at all floors with all leads and lifts Only
Providing throting or plaster drip and moulding to rcc Rupees Forty Three
chhajja for all floor. And Paise Five Only
Providing 20 mm thick water proof cement plaster
using water proofing powder 1Kg./1bag of cement for
all floors on brick/ concrete wall work using water
proofing materials in C M 1: 4 (1 cement 4 coasrse
sand) including finishing with a flooting coat of neat
Hundred Eighty Five
76 1879.00 cement slurry etc complete for all floor. and shall be Smt 285.83
And Paise Eighty
guaranteed for minimum period of 10 years after
handing over the completed building by the main
contractor to be finished as directed. Stamp paper
guarantee 10 years to be furnished before receiving
any payment from the client.
Applying two coats of putty & two coats of primer of
approved brand and manufacture on new wall surface Rupees Forty And
77 11991.00 to give an even shade including thoroughly brushing Smt 40.59 Paise Fifty Nine
the surface free from mortar dropping and other Only
foreign matter and sand papered smooth.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing and applying Wall painting (three coats)
with plastic emulsion paint of approved brand and
manufacture on under coated wall surface to give and
78 11991.00 even shade including throughly brushing the surface Smt 125.40
Five And Paise Forty
free from mortor droppings and other foreign matter
and sand paperd smooth on new work to give an even
shade for all height
Finishing wall with weather proof low velocity ultima
exterior emulsion paint on wall surface (two coats) to
79 4722.00 give an required shape even shade after thoroughly Smt 120.26
And Paise Twenty
brushing the surface to remove all dirt, and remains of
loose powdered materials.etc complete for all height
Provding and fixing M.S.plain grills of required pattern
with M.S. flats at required spacings & frame around,
Hundred Fourteen
80 6890.00 sequare or round bars with round headed bolts and Kg. 114.13
And Paise Thirteen
nuts or by screws including applying a priming coat of
red lead paint two coat of Oil paint.
Provding and Fixing of Mild Steel Hollow Profile
Section of 1.25 mm thick for Door Frames of size
mm x 65 mm with Heay Stainless Steel 4' Long Hinges
(4 no Each Side). The Frame Should be of Approved
Shape, Single Rabate or double rebate as per site
81 366.00 Requirement and as per instruction of Engineer Rmt 795.88
incharge he Frame Sections of Doors shold be fixed
Eighty Eight Only
with heavy hold fasts and with Necessary Cement
Mortar (1:4) Filling inside holow portion and also
include two coat of Oil paint including red lead primer
etc complete After Fixing of Frame.
Providing and fixing flush door both sides laminated
shutter fabricated from 35 mm thick solid core
malemine faced three layered pre laminated flat
pressed wood based exterior grade bonded
BWP/BWR synthetic resin having stamped IS
82 136.00 grade I type II including three coats of lacquer Smt 2,929.00
polishing to exposed wooden surfaces and Stainless
steel decorative type designs fixtures/ fastening
etc.including I.T.W. triangular batten patti of size
30m.m.x30m.m.etc. as per architectural detailed
drawing and as directed by engineer in charge.
Providing and fixing Three Track Domal window
having extruded aluminum Colour anodized 60 micron
Sliding section outer frame size 80 mm x 45 mm
weight 1.555 Kg./m (Jindal Section code : 21376) and Rupees One
shutter frame 27 mm x 65 mm weight 0.851 Kg./m Thousand Five
83 351.00 (Jindal Section code : 21490) and Section inner patti Smt 1,583.95 Hundred Eighty
size 38.70 mm x 28.50 mm weight 0.303 Kg./m (Jindal Three And Paise
Section code 19453) with 5 mm clear glass (Modi or Ninety Five Only
Saint Gobain) including one additional shutter ss
mosquito jali and including all accesible accesories
complete etc. or as directed Engineer in charge.
Providing and fixing standared extruded of
alluminium section of size 63.50 x 38.10 x 1.95 mm @ Rupees One
Wt 1.094Kg./ Rmt with colour anodized alluminium Thousand Three
84 70.00 frame with 5 mm thick transparent bronze colour Smt 1,301.82 Hundred One And
tinted float glass with colour anodized alluminium Paise Eighty Two
frame for ventilation with 5 mm thick frosted glass as Only
details etc complete for.window
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Rupees Six Hundred
Providing and Fixing heavy duty S.S. Door Closer as
85 119.00 Each 686.80 Eighty Six And Paise
directed by Engineer In charge.
Providing and fixing factory made single extruded
WPC (Wood Polymer Composite) solid
door/window/Ceosetory windows & other
Frames/Chowkhat comprising of virgin PVC polymer
of K value 58- 60 (Suspension Grade), calcium
carbonate and natural fibers (wood powder/ rice
husk/wheat husk) and non toxic additives (maximum
oxicity index of 12 for 100 gms) fabricated with miter
joints after star headed SS screws having minimum
frame density of 750 Kg./ cum, screw withdrawal
strength of 2200 N (Face) & 1100 N (Edge),minimum
compressive strength of 58 N/mm2, modulus of
elasticity 900 N/mm2 and resistance to spread of
Hundred Fifty One
86 286.00 flame of Class A category with property of being Rmt 551.71
And Paise Seventy
termite/borer proof, water/moisture proof and fire
retardant and fixed in position with M.S hold
fast/lugs/SS dash fasteners of required dia and length
complete as per direction of Engineer-In- Charge. (M.S
hold fast/lugs or SS dash fasteners shall be paid for
separately). Note: For WPC solid door/window
frames, minus 5mm tolerance in dimensions i.e depth
and width of profile shall be acceptable. Variation in
profile dimensions on plus side shall be acceptable but
no extra payment on this account shall be made.
applying PVC solvent cement and screwed with full
body threadedComplete as per direction of Engineer-
Providing and fixing factory made single extruded
WPC (Wood Polymer Composite) solid plain flush
door shutter of required size comprising of virgin
polymer of K value 58-60 (Suspension Grade), calcium
carbonate and natural fibers (wood powder/ rice
husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) having minimum
density of 650 Kg./cum and screw withdrawal
strength of 1800 N (Face) & 900 N (Edge), minimum
compressive strength 50 N/mm2, modulus of elasticity
87 84.00 Smt 3,384.61 Hundred Eighty
850 N/mm2 and resistance to spread of flame of Class
Four And Paise Sixty
A category with property of being termite/ borer
proof, water/moisture proof and fire retardant and
including stainless steel butt hinges of required size
with necessary full body threaded star headed counter
sunk S.S screws, Handles, Stopper, Door closer, Tower
bolt all as per direction of Engineer-In- Charge. (Note:
stainless steel butt hinges and
necessary S.S screws shall be paid separately) 1)
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing and laying 16-18 mm thick polished granite
stone machine cut in single piece (Max. available) in
sill and jambs of door,window,ventilation & lift wall
cladding,staircase flooring landing, risers & treads, Rupees Three
skirting laid over 10 mm thick cement mortar 1 : 3 (1 Thousand Two
88 346.00 cement : 3 coarse sand) and jointed with grey cement Smt 3,275.43 Hundred Seventy
slurry with matching pigment incl. rubbing and Five And Paise Forty
polishing,half rounding edge and incl. fixing of hilty Three Only
fastener at every 1/3 span of sill as required size etc.
complete colour and shed as approved by architect
engineer in charge.
Providing and laying Granite slab (18 mm thick) one Rupees Two
side polished flooring over 20 mm (average) base of Thousand One
89 34.00 cement mortar 1:6 (1 cement : 6 coarse sand) or L.M Smt 2,199.78 Hundred Ninety
1:1.5 laid and jointed with grey cement slurry Nine And Paise
including rubbing and polishing complete. Seventy Eight Only
Providing and Laying 600mm x 600 mm full body
Double Charge Vitrified Glossy tiles 9 to 10 mm thick
tiles for flooring including skirting over 20 mm
(average) base of cement mortar 1:6 (1 cement :
corse sand) on new surface or fixing on existing Rupees One
flooring by adhesive material including and jointed Thousand Five
90 2160.00 with colour cement slurry including finished with flush Smt 1,562.47 Hundred Sixty Two
pointing & cleaning the surface etc. complete. Pattern And Paise Forty
Colour and shade as approved by architect. etc Seven Only
completed as directed by E.T.C/PMC. approximately
20% area will be dark shade and dark shade shall be
decided by EIC.providing Expansion joint @ every 5mt
filled with epoxy siealant
Providing and Laying SBR 2 tiles adhasives below Hundred Ninety One
flooring with cement mortar as per instruction of EIC And Paise Ninety
Providing and laying machine cut, mirror polished,
Italian Marble stone flooring laid in required pattern
in linear portion of the building all complete as per
architectural drawings, with 18 mm thick stone slab
laid over 20 mm (average) thick base of cement Rupees Five
mortar 1:4 (1 cement : 4 coarse sand) laid and jointed Thousand Two
92 19.00 with white cement slurry @ 4.4 Kg./Smt, including Smt 5,226.75 Hundred Twenty Six
pointing with white cement slurry admixed with And Paise Seventy
pigment to match the marble shade including rubbing, Five Only
curing and polishing etc. all complete as specified and
as directed by the Engineer-in-Charge.
1) 18 mm thick Italian Marble stone slab, Perlato,
Rosso verona, Fire Red or Dark Emperadore etc.
Providing and laying cement concrete flooring 1:2:4 (1-
cement : 2-coarse sand : 4-graded stone aggregate
93 3075.00 20mm nominal size) laid in one layer and finished Smt 347.42
Seven And Paise
with a floating coat of neat cement. (B) 50mm thick.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing and laying 24" x 24" Vitrified double charge
8 mm thick tile flooring over 20 mm (average) base of
cement mortar 1:6 (1cement : 6 coarse sand) or L.M
1:1.5 laid on new surface or fixing on existing flooring
94 312.00 Smt 1,467.72 Hundred Sixty
by adhesive material including dismentalling of
Seven And Paise
existing flooring and jointed with colour cement slurry
Seventy Two Only
including finished with flush pointing & cleaning the
surface etc.complete For Antiskid
Providing and laying Ceramic tiles 6mm thick in
flooring treads of steps and landing laid on a bed of Rupees One
95 323.00 12mm thick cement mortar 1:3 (1-cement : 3-coarse Smt 1,005.52 Thousand Five And
sand) finishing with flush pointing in white cement. Paise Fifty Two Only
Providing and laying coloured glazed tiles of the size Rupees One
300 mm x 200 mm x 8 mm/ 300 mm x 450 mm x 8 Thousand Four
96 2087.00 mm in skirting, risers of steps and dedo on 10 mm. Smt 1,488.24 Hundred Eighty
thick cement plaster 1:3 (1 cement : 3 coarse sand) & Eight And Paise
jointed with white cement slurry. Twenty Four Only
Providing and laying 19mm x 65mm round,'D' edge
and polished granite pencil patti on top, with cement Rupees Three
paste and including backing coat in C.M. 1:4. All joints Hundred Sixty Four
filled with colour/ epoxy grout and wiped to give And Paise Sixty One
sharp joints with flush pointing and washed clean with Only
Providing and fixing Sand which type Granite platform
including supplying and fixing granite stone 18 mm
thick mirror polished 1st quality Granite stones in top Rupees Five
and side posiition and vertical strip at front over 25 Thousand Eight
98 57.00 mm thick polished kotah stone platform fixing in top Smt 5,816.59 Hundred Sixteen
and sides and itermediates supports fixing with And Paise Fifty Nine
cement mortar and adhesivee and finishing including Only
cutting for fixing of sink any size (as directed by
engineer incharge) at required position etc complete.
Providing and laying chequered terrazo tiles 22mm
thick with marble chips of sizes upto 6mm in floors on
25mm thick bed of Lime mortar 1:1.5 (1-Lime putty : Rupees Seven
1.5 coarse sand) or C.M. 1:6 (1 -cement :6 - coarse Hundred Eighty
sand) jointed with neat cement slurry mixed with Eight And Paise
pigment to match the shade of the tiles including Thirty Eight Only
rubbing and polishing complete. (A) Light shades
using white cement
Providing and fixing Flexible Homogeneous Vinyl
Flooring of With treatment of Polyurethane
Reinforced Surface, Densely Compacted, Anti-Bacterial
100 402.00 Smt 1,297.85 Hundred Ninety
and fungicidal and Antistatic having thickness of
Seven And Paise
2.00mm With weight of 3150 g/m2 etc completed as
Eighty Five Only
directed by E.T.C/PMC.
Providing and laying machine cut free edges machine
double polished Kota stone for shelves in cupboard Rupees Nine
and walls in single piece (Miximum 1.50 mt.) 25 mm Hundred Ninety Six
including cutting grooves in walls and fixing the stone And Paise Eighty
with neat cement slurry in true line and level etc Seven Only
completed as directed by E.T.C/PMC. for Shelves
Providing & fixing 18 mm thick of approved quality of
green marble urinal partition in single piece of size Rupees Two
0.62 x 1.20 mt. in cement mortar 1:1 (1 cement : 1 Thousand Three
102 4.00 coarse sand) and finishing with white cement Smt 2,318.96 Hundred Eighteen
including polishing on bothsides,finishing edges with And Paise Ninety Six
round shape of marble etc completed as directed by Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
All the waterproofing activities shall be carried out by
in-house application company of the principal material
manufacturer and provide a written corporate Supply
Apply Corporate Warranty from the principal
manufacturer that all work executed will be free from
defects in materials, workmanship and free of leaks
for a period of 10 years from the date of Work
Completion, unless resulting from structural defects or
causes other than the work of this section. Said defects
shall be remedied by the principal manufacturer for
the period of the warranty without additional cost to
the owner for waterproofing material only. Providing
and applying hydrophilic crystalline based
Hundred Fifty Four
103 1051.00 waterproofing system In two coat application.The Smt 354.51
And Paise Fifty One
application to be done from +ve(positive) side on a
wet open pore green concrete surface at coverage of
0.8to1Kg./Smt as per manufacturer specification.It
should be hydrophilic in nature,should be able to grow
crystals year after year to seal microcracks.The
product should confirm to DIN1048 part5 and should
provide in depth crystallization.The material and
application warranty to be given by manufacturer’s
authorized distributor/applicator on prescribed
format for10 years.Note:- Treated area should be
screeded using hydrophilic crystalline admixture
KIM(Krstol Internal Membrane) @ 2% for be stresults:-
Application of crystalline coating to be done within
All the waterproofing activities shall be carried out by
in-house application company of the principal material
manufacturer and provide a written corporate Supply
Apply Corporate Warranty from the principal
manufacturer that all work executed will be free from
defects in materials, workmanship and free of leaks Rupees One
for a period of 10 years from the date of Work Thousand Ten Only
Completion, unless resulting from structural defects or
causes other than the work of this section. Said defects
shall be remedied by the principal manufacturer for
the period of the warranty without additional cost to
the owner for waterproofing material only.
Providing & laying china mosaic flooring of approvd
make for plain and curved surfaces at floor, dado, otta
etc. comprising of 20 to 25 mm size broken pieces of
ceramic/ glazed tiles (only white colour) laid over 1:6
cement mortar bedding including applying cement
slurry at the rate of 2.75 Kg. per Sq.m. on plain or
sloped surfaces and filling joints with white cement.
The flooring/ dado shall be tampered with wooden Rupees Seven
rammer not exceeding 2 Kg. in weight to bring the Hundred Seventy
mortar up to the surface including rounding of the Nine And Paise
junctions and extending them upto 15 cm along the Seventy Only
parapet wall. The rate shall include any type of bands,
vata, any colour, any pattern or design as per drawing,
curing, cleaning with water and oxalic acid etc.
complete as sample approved by Architect/ EIC. (Only
plan area shall be measured including vata upto
150mm height). Rates should be inclusive of acid
washing and vata.
Providing cement vata (10 cm x 10 cm size) quartar Rupees Twenty Four
106 367.00 round in cement mortar 1:1 including neat cement Rmt 24.28 And Paise Twenty
finishing watering etc. complete. For all floor Eight Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing and fixing in position S.S.
railing(considering 1mt. height)by providing vertical
support of 38 mm dia. pipe on top 50 mm dia stain less
steel pipe rail with starting and end point vertical post
107 157.00 of 50 mm dia with round ball on top of post including Rmt 3,067.37
Seven And Paise
bending welding and fixing in R.C.C./brick work as
Thirty Seven Only
directed.(top 50 dia vertical 38mm dia at 1 mt. c/c &
horizontal 3 No 25mm dia.).(testing is required of s.s
304) for all floor
Providing and fixing in position S.S. daso by providing
top 50 mm dia stain less steel pipe rail with starting
and end point vertical post of 50 mm dia with
108 64.00 Rmt 1,689.73 Hundred Eighty
wall/column including bending welding and fixing for
staircase and balcony as directed.(testing is required
Seventy Three Only
of s.s 304) for all floor
Providing and fixing rough ground (packing) in the
gap between wall or stone sill jambs and frame. The
frame assembly/ surfaces to which is to be fixed with
srews shall be inclusive (1) Anchor fastners of Hilty
HRDUGT-10 X 140 x70mm or equivalent at approx
No in 2 rmt length of part thereof as required to fix the
Hundred Four And
109 500.00 aluminium frame) Av. 8 mm thick wooden seasoned Rmt 104.97
Paise Ninety Seven
C.P. teak wood/ water proof marine ply confirming to
IS 710 filling the gap between wall or stone jambs, sills
and frame on all sides (inside/ outside) and along the
perimeter first with polyeurothene baker rod and av.
10 mm thickness and then sealing the remaining gap
with neutral grade sealant of approved make and color
Providing and filling with scrap of AAC block (good
quality) as a cinder as directed by engineer in charge
110 146.00 Cmt 2,139.48 Hundred Thirty
in sunks in layers of 15 cm thk including watering
placing ramming well etc. as directed.
Forty Eight Only
Providing & fixing Steel work welded, in built up
sections framed work including cutting, hoisting, fixing
in position and with one coat primer & two coat oil
Hundred Thirty One
111 11063.00 paint as per detail drawings etc. complete. in columns, Kg. 131.83
And Paise Eighty
beams and joists, channels M.S. flat, Angles, Pipes, tees
flats with connecting plates or angle cleats
STRUCTURAL STEEL
Providing and Fixing 6 mm thick Lexan Polycarbonate
multi wall roofing sheet fixed with hilti screw and
112 57.00 Smt 1,441.90 Hundred Forty One
rubber silicon sealer and alluminium strip of size 50 x
And Paise Ninety
3 mm etc complete as directed by Engineer in charge
Providing and Fixing 10 mm thick multiwall Rupees One
polycarbonate roofing sheet UV resistant fixed with Thousand Four
113 292.00 hilti screw and rubber silicon sealer and alluminium Smt 1,441.90 Hundred Forty One
strip of size 50 mm x 3 mm etc complete as directed by And Paise Ninety
Engineer in charge. Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing & Laying plinth protection to building
including excavation in oridnary soil and laying
cement concrete (0.10 mt thk) 1:5:10 using Stone
aggregates of 20 mm nominal size in foundation Layer
and above on PCC and providing and laying brick
masonry 1:6 (1 cement:6 course sand) and providing
114 133.00 Smt 1,412.99 Hundred Twelve
Cement Cocrete 1:2:4 (0.10 mt thk) (1 Cement :
And Paise Ninety
Coarse Sand : 4 Stone Aggregrate 20 mm nominal size)
coping on top including Broom finishing (plaster
mm) with Square line (0.20 X 0.20) marking on Top
and Side) and curing etc complete only top area
should be measured
Supplying and Installing of Metalium SL-4 type 84R Rupees Two
Aluminium 0.65mm TCT Plain Exterior Grade Powder Thousand Three
115 116.00 Coating of Panels and Back side Framming G.S. Black Smt 2,374.51 Hundred Seventy
Exterior Louvre System. etc. complete as directed by Four And Paise Fifty
Engineer-in-charge. One Only
SIGNAGES HANGING FROM CEILING- Providing,
Fabricating & Fixing signage's using 304 grade
Stainless steel 1.5 mm thick brushed steel finish plate
(2 No) with 8mm thk. Acrylic sheet covered with vinyl
of approved colour, sandwiched between two S.S plate
and fixed with s.s struds. Sandwiched plates should be
Rupees Fifty Eight
fixed in 12mm X 12mm S.S 1.5mm thk.304 grade Sq.
116 40.00 58.58 And Paise Fifty Eight
frame and punched (laser cut) lettering carried out on Inch
both the s.s plates of required size and text as directed
by Engineer and hanged to ceiling with the help of S.S
8mm thick chain at both ends with making all the
fixing arrangement to the ceiling and to the plate
complete. size: 12" x 6" etc completed as directed by
Providing and fixing eco-friendly light weight calcium
silicate false ceiling tiles having Tegular edge & 15 mm
Thick Densified edges on the Tile Periphery for Extra
Strength The Light weight calcium silicate ceiling tiles
shall have, light reflection 85% non-combustible as
per B.S. 476 part IV, 100% humidity resistance and
also having thermal conductivity0.043° w/m KC.for
the best thermal Insulation. The Light weight calcium
Silicate tile shall be of approved texture Fine fissured/
Spintone/Cosmos having NRC value of 0.5 & Globe
having NRC value of 0.75 NRC or equivalent of size
595 X 595 mm to be laid on true horizontal level Rupees One
suspended inter locking metal grid of hot dipped Thousand Six
117 74.00 galvanized steel sections (galvanizing @120 grams per Smt 1,674.15 Hundred Seventy
Smt including both side) consisting of main ‘T’ runner Four And Paise
suitably spaced at joints to get required length and Fifteen Only
size of 24X38mm made from 0.30 mm thick
(minimum) sheet, 1200mm centre to centre, and cross
‘T’ of size 24X28mm made out of 0.33mm (Minimum)
sheet spaced 1200mm along spaced between main ‘T’
at 600mm centre to centre to form agrid of
1200X600mm and secondary cross ’T’ of length
600mm and size 24x28mm made of 0.30 mm thick
(Minimum) sheet to be interlocked at middle of the
1200X600mm panel to form grid of size 600X600mm
resting on periphery walls/partitions on a perimeter
wall angle pre-coated steel of size (24X24X3000mm
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing and fixing single layer waterproof gypusm
board 12.5 mm thick of the make Newgood Group Co.
Ltd. or equivalent & Newgood Group Co. Ltd. company
sections using waterproof board of size 1220 mm x
1830 mm x 8.0 mm suspended by G.I suapender of size
25 mm x 3 mm with intermediate channel of size
mm x 40 mm x 0.80 mm at 1220 mm center to center Rupees Six Hundred
118 105.00 ceiling section of size 40 mm x 35 mm x 0.55 mm at Smt 606.95 Six And Paise Ninety
457 mm center to center and perimetre chanel A of Five Only
size 20 mm x 27 mm x 30 mm x 0.50 mm at edges &
drops including paper tap sand sofit cleat, anchor
fastener, scoch bolt connecting cleat joining compound
top coat on ceiling including making necessary
opening for light fitting, diffuser etc. complete as per
detail drawing as directed.
Providing and fixing in position collapsible steel
shutters with vertival channels 20 mm x 10 mm x
mm braced with flat iron diagonals 20 mm x 5 mm size
Thousand Seventy
119 6.00 with top & bottom rails of T iron 40 mm x 40 mm x 6 q 6,076.50
Six And Paise Fifty
mm with 38 mm diameter steel pulleys complete with
bolts, nuts, locking arrangements, stopper handles
including applying a priming coat of red lead paint.
Designing, fabricating, testing, installing and fixing in
position Curtain Wall with Aluminium Composite
Panel Cladding, with open grooves for linear as well as
curvilinear portions of the building, for all heights and
all levels etc. including a) Structural analysis & design
and preparation of shop drawings for pressure
equalisation or rain screen principle as required,
proper drainage of water to make it watertight
including checking of all the structural and functional
design. b) Providing, fabricating and supplying and
fixing panels of aluminium composite panel cladding
in pan shape in metalic colour of approved shades Rupees Three
made out of 4mm thick aluminium composite panel Thousand Eight
120 100.00 material consisting of 3mm thick FR grade mineral Smt 3,829.92 Hundred Twenty
core sandwiched between two Aluminium sheets Nine And Paise
(each 0.5mm thick). The aluminium composite panel Ninety Two Only
cladding sheet shall be coil coated, with Kynar
based PVDF/ Lumiflon based fluoropolymer resin
coating of approved colour and shade on face # 1 and
polymer (Service) coating on face # 2 as specified
using stainless steel screws, nuts, bolts, washers,
cleats, weather silicone sealant, backer rods etc. c) The
fastening brackets of Aluminium alloy 6005 T5/ MS
with Hot Dip Galvanised with serrations and serrated
washers to arrest the wind load movement, fasteners,
SS 316 Pins and anchor bolts of approved make in SS
316, Nylon separators to prevent bi-metallic contacts
Providing and fixing Structural Glazing with using the
17 Micron anodised of approved colour alluminium
section as transium, mullium of size 63.5mm x
38.1mm x 2 mm with using 5 mm thick toughening
reflective structural glass (Compliances with GRIHA
121 100.00 Smt 2,918.90 Hundred Eighteen
standard) and fixed with silicone sealant and spacer
And Paise Ninety
tap and at corner sealed neoprene foam dust and Air
sealed gasket mirred including scaffolding
etc.complete with all necessary fitting and fixtures for
openable window as per Architectural drawing.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing and laying mirror polished kotah
stone(hand dressed chissel) slab flooring over 20 mm
Thousand Nineteen
122 182.00 thick base of CM 1 : 6 laid over and jointed with grey Smt 1,019.39
And Paise Thirty
colour cement slurry including rubbing and polishing
with amery stone etc. complete. 25 mm thick
Providing and laying compacted W.B.M 100 mm thick Rupees One
of machin crushed B.T. Metal of size of size 45 mm to Thousand Four
123 145.00 63mm with using 20 % stone screenings (Grit) and Cmt 1,453.71 Hundred Fifty Three
stone dust as filler including spreading, watering and And Paise Seventy
consolidation by vibratory roller etc. complete. One Only
Providing & Laying 15.00 cm thick M200 grade
concrete trimix using P21(water reducing concrete
admixture at 100 ml per bag of cement & recon 3 s
fiber at 125 gm per bag of cement including making C Rupees Nine
channel 75 x 75 mm required to maintain level,slope Hundred Ninety
and thickness of the concrete road leveling of placed Three And Paise
concrete with surface vibrator and finishing with Eighty Four Only
power floater & trowel light brooming the surface &
including cutting & filling of expansion joint as
directed by Engineer in charge.
Providing and fixing pre-cast Rubber Dye/ steel Dye
inter locking concrete block 60mm thick with grade of
concrete M300 pnumatic compressed/ vibrated Rupees Seven
mechanically and as per approved design Confirming Hundred Six And
to IS 15658 : 2006 including 35 mm Sand layer for Paise Seventy Seven
levelling and filling the joint with sand in proper line Only
and level as per guidlines of IRC : SP 63-2018 etc.
Providing and fixing I - let style cloth curtain using
approved good quality of cloth in light & dark Rupees One
matching colour combination for curtain back linning Thousand Twenty
with ring patta colour matching and using with all req. Eight And Paise
hardware, materilas, including cutting & stitching etc Eighteen Only
Providing and fixing Rooms Window curtain with Rupees Eight
Curtian Stainles Steel rod and Middle Suppoet and Hundred Sixty Five
Bracket with best quality and approved brand And Paise Fifty
necessary etc comp. or as directed. Seven Only
Supply & Installation external cladding using fibre
cement plank of cassia/ straight grain/ teak coloured
texture (External Grade) thickness 8mm and
dimension 150mmX3000mm. Fibre cement plank
should be of minimum density 1300Kg./m3 (±50) and
comply to ASTM C 1185 and ISO 8336 part (E) for
confirming durability properties and BS 476-part 5, 6 Rupees One
& 7, Thermal conductivity should be minimum 0.15 Thousand Three
128 100.00 W/m˚K and PH value should be in the range of 7-8. Smt 1,353.40 Hundred Fifty Three
Depending on height of structure Board to be fixed And Paise Forty
using Aluminium rectangular frame section of suitable Only
gauge with minimum spacing 450mm to 600mm or as
per direction of Engineer Incharge, Plank to be fixed
using Screws of Tensile strength 34N and Shear
strength 68N on framing maintaining distance of
minimum 25mm between two planks. All plank to
plank joints to be staggered and finished.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
STP on MBBR_Technology(200_KLD) PART -A, MEP
WORK Planning, Designing, Detailing, Manufacturing,
Supplying,Erection, Testing and Commissioning of
Sewage Treatment Plant (STP) of 200 cu mt per day,
including all electrical,mechanical equipment,
interconnected piping, valves,pumps,instruments.
Design and construction of RCC tanks i.e. oil & greace
chamber, collection tank, bio reactor tank, tube settler,
chlorine contact tank and final treated water tank with
manhole cover & all other civil structure of the pump
room of the plant to complete the job. Connection of
the underground sewage line to STP as well as
Rupees Twenty Five
connection of treated water of STP to nearest drain
Lakh(s) Seventy
129 1.00 and Bypass connection of STP to the drain point with Each 25,75,500.00
Five Thousand Five
required civil,piping work & accesories all included in
the scope of work. Suitable size of Shade to be
provided to cover up the entire STP plant. Aeration
should be provided in both Collection as well as Bio-
Reactor Tank. All wetted parts should be in SS304. STP
should be based on MBBR Technology including
primary treatment secondary treatment and tertiary
treatment of having Multi Grade Filter, Activated
Carbon Filter with necessary chlorine contact system,
Poly Electrolyte Dosing system complete to treat raw
seawge from Domestic liquid waste with output
characteristics as follows : Parameter
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -40) line including fittings
of standard make as apprroved by Engineer In charge.
Rupees Seventy Two
Pipe shall be fixed on the wall with the help of clamp
130 360.00 Rmt 72.65 And Paise Sixty Five
at every two meter C/C or shall be concealed as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -40) line including fittings
of standard make as apprroved by Engineer In charge.
Rupees Ninety One
Pipe shall be fixed on the wall with the help of clamp
131 560.00 Rmt 91.84 And Paise Eighty
at every two meter C/C or shall be concealed as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -40) line including fittings
of standard make as apprroved by Engineer In charge. Rupees One
Pipe shall be fixed on the wall with the help of clamp Hundred Nineteen
at every two meter C/C or shall be concealed as And Paise Fifteen
directed including necessary fittings etc. including Only
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -40) line including fittings
of standard make as apprroved by Engineer In charge. Rupees One
Pipe shall be fixed on the wall with the help of clamp Hundred Forty Eight
at every two meter C/C or shall be concealed as And Paise Twelve
directed including necessary fittings etc. including Only
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -40) line including fittings
of standard make as apprroved by Engineer In charge. Rupees One
Pipe shall be fixed on the wall with the help of clamp Hundred Ninety
at every two meter C/C or shall be concealed as Five And Paise Sixty
directed including necessary fittings etc. including Seven Only
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -80) line including fittings
of standard make as apprroved by Engineer In charge. Rupees Four
Pipe shall be fixed on the wall with the help of clamp Hundred Fifty Two
at every two meter C/C or shall be concealed as And Paise Forty
directed including necessary fittings etc. including Eight Only
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -80) line including fittings
of standard make as apprroved by Engineer In charge. Rupees Five
Pipe shall be fixed on the wall with the help of clamp Hundred Sixty Six
at every two meter C/C or shall be concealed as And Paise Sixty One
directed including necessary fittings etc. including Only
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National Rupees One
Sanitation Foundation (NSF) seal for potable water of Hundred Seventy
following dia. nominal bore tube fittings and clamps And Paise Thirty Six
including making good the wall, ceiling and floor etc. Only
complete. [D] 15 mm.
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National
Sanitation Foundation (NSF) seal for potable water of
138 100.00 Rmt 208.80 Hundred Eight And
following dia. nominal bore tube fittings and clamps
Paise Eighty Only
including making good the wall, ceiling and floor etc.
complete. [E] 20 mm.
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National Rupees Two
Sanitation Foundation (NSF) seal for potable water of Hundred Fifty Three
following dia. nominal bore tube fittings and clamps And Paise Eighty
including making good the wall, ceiling and floor etc. Two Only
complete. [F] 25 mm.
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National Rupees Three
Sanitation Foundation (NSF) seal for potable water of Hundred Thirty
following dia. nominal bore tube fittings and clamps Eight And Paise
including making good the wall, ceiling and floor etc. Twenty Four Only
complete. [G] 32mm.
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National Rupees Four
Sanitation Foundation (NSF) seal for potable water of Hundred Forty
following dia. nominal bore tube fittings and clamps Seven And Paise
including making good the wall, ceiling and floor etc. Seventy Two Only
complete. [H] 40 mm.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National
Rupees Six Hundred
Sanitation Foundation (NSF) seal for potable water of
142 200.00 Rmt 660.58 Sixty And Paise Fifty
following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc.
complete. [I] 50 mm.
Providing and fixing to wall ceiling and floor 10.0 Kg.
F/Cm2 working pressure polythene pipes of the Rupees Two
following outside Dia. Low densidy, complete with Hundred Eighty And
special falnge compression type fittings, wall clipsetc. Paise Twenty Three
including making good the wall ceiling and floor.(F) Only
Providing and fixing to wall ceiling and floor 10.0 Kg.
F/Cm2 working pressure polythene pipes of the Rupees Three
following outside Dia. Low densidy, complete with Hundred Thirty
special falnge compression type fittings, wall clipsetc. Nine And Paise Five
including making good the wall ceiling and floor.(F) Only
Supplying & installing Brass Ball Valve conforming to Rupees Two
IS 778, of RB, Italy or equivalent. Ball valve must be Thousand One
145 18.00 having screwed ends. The ball valve should be with Each 2,147.61 Hundred Forty
stand with maximum pressure up to 16 Kg./cm2. Seven And Paise
Complete job as specified & directed. c) 50 mm Sixty One Only
146 12.00 d) 65 mm Each 2,490.26 Hundred Ninety And
Paise Twenty Six
147 10.00 e) 80 mm Each 5,143.12 Hundred Forty
Three And Paise
Providing and fixing PVC SWR Nahni trap IS 14735 for
drain - 100 mm diameter with jali of the following
Hundred Eighty Six
148 88.00 nominal diameter of self cleansing design with C.I Each 586.27
And Paise Twenty
scread down or hinged grating including the cost of
cutting and making good the walls.
Providing and fixing 600mm x 450mm Bevelled edge Rupees Eight
mirrror of superior glass mounted on 6mm thick A.C. Hundred Fifty Nine
sheet or plywood sheet and fixing to wooden pluge And Paise Forty One
with C.P. brass screws and washers. Only
Providing and fixing wash down wall hung water
closet (European type) of jaquar or equivalent with
integral 'P' trap jointed within C.I pipe in C:M 1:1 Rupees Seventeen
including matching seat cover, chair braket, Conceled Thousand Eight
150 27.00 metropole of jaquar or equivalent, 2 way bibcock of Each 17,837.61 Hundred Thirty
jaquar or equivalent, health foucet of jaquar or Seven And Paise
equivalent with 1 m extension pipe, toilet paper Sixty One Only
holder of jaquar or equivalent with all accessories etc.
Providing and fixing urinals of jaquar or equivalent
Thousand Ninety
151 10.00 with integral drain pipe jointed within C.I pipe in C:M Each 10,094.95
1:1, Conceled cock, all accessories etc. complete.
Ninety Five Only
Providing and Fixing autoclosing concealed urinal
152 10.00 flush valve with wall flange complete. As directed by Each 2,121.00
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Rupees Sixty Seven
Providing & Fixing C.P Brass waste for washbasin or
153 45.00 Each 67.91 And Paise Ninety
sink (a) 32 mm Dia
Providing and fixing C.P. brass towel rail comlete with Rupees Six Hundred
154 40.00 C.P. brass brackets fixed to wooden plugs with C.P. Each 616.42 Sixteen And Paise
brass scews.(B) 600mm x 20mm size. Forty Two Only
Providing and fixing screw down two way bib taps of Thousand Three
155 88.00 15mm dia- Brass down brigh polished jaquar code No Each 2,355.32 Hundred Fifty Five
FLR-5041N And Paise Thirty
Providing and fixing pillar tap, capstan head, screw
Hundred Eight And
156 33.00 down high pressure with screws, shanks and back Each 308.73
Paise Seventy Three
nuts. (i) 15mm dia.
Providing and fixing table top wash basin on 18mm
thick black shade polished granite for top with 2 No of
C.I. Heavy brecket with 1 No of wash basin Jaquar Rupees Thirteen
brand or equivalent, C.P. brass Jaquar pillar cock or Thousand One
157 29.00 equivalent, angle valve or equivalent, C.P. brass Each 13,123.94 Hundred Twenty
extension nipple 62mm long, S.S. flange water super Three And Paise
connection pipe 60cm. long and full thread waste Ninety Four Only
coupling includingm, bottle trap making hole in
granite for wash basin etc. complete. (For all floor)
Providing & Fixing soap dish of jaquar or equivalent Thousand Thirty
make or as directed and complete. Four And Paise
Twenty Four Only
Providing & fixing CP brass double coat hook etc.
159 85.00 Each 514.09 Hundred Fourteen
And Paise Nine Only
Providing and fixing 2 No support arms and backrest Rupees Twenty Six
to mount at fixed height (Model R 1100 -Commander Thousand Five
160 2.00 or equivalent) for handicap toilet complete as Each 26,577.14 Hundred Seventy
recommended by the etc completed as directed by Seven And Paise
E.T.C/PMC. Fourteen Only
Rupees Twenty Four
Providing and fixing raised toilet seat with cover for
handicap toilet (Model R-35: Presalit – Commander or
161 2.00 Each 24,607.64 Hundred Seven And
equivalent) as recommended by the etc completed as
Paise Sixty Four
directed by E.T.C/PMC.
Providing and fixing brackets, tracks (Model R4140) Rupees Forty Three
with flexible feed & waste pipes for adjustable type Thousand Five
162 2.00 wash basin complete as recommended, for handicap Each 43,506.76 Hundred Six And
toilet (Make : Presalit – Commander or equivalent)etc Paise Seventy Six
completed as directed by E.T.C/PMC. Only
Providing and fixing to wall, ceiling, floor
Kg.f/Sqcm working pressure polythelene pipes of
163 200.00 110mm dia. For rain water, low density, complete with Rmt 339.05
Nine And Paise Five
special flange compression type fittings, wall clips etc.
making good wall ceiling and floor.
Constructing brick masonry road gully chamber
164 8.00 mmx450mmx600mm incl.500 mmx450mm Each 2,017.19
Seventeen And Paise
C.I.horizontal grating with frame complete
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing & fixing S.W. Gully trap with C.I.grating brick
masonary chamber & water tight C.I. Cover with frame
165 8.00 Each 1,292.19 Hundred Ninety
of 300x300 mm size (inside)with standard weight.
Square mouth trap 100mm x 100mm size P- type
Providing and fixing Gun metal check or non-return Hundred Twenty
fullway wheel valve.(C) 25mm dia. And Paise Sixty
Rupees Six Hundred
Providing and fixing Gun metal check or non-return Sixty Three And
fullway wheel valve.(E) 40mm dia. Paise Forty Three
Constructing manhole with RCC top slab in 1:2:4 mix
(1 cement:2 coarse and :4 graded stone aggregate
mm nominal size) foundation concrete 1:3:6 mix (1
cement :3 coarse sand : 6 brick bats 40 + 50 mm size)
inside plastering 15mm th. with cement mortar 1:5 (1
168 35.00 cement :5 coarse sand) finished with a floating coast of Each 11,042.74
neat cement and making channel in cement concrete
Seventy Four Only
1:2:4 mix (1 cement: 2 Coarse sand :4stone aggregate
20mm nominal size) inside size 900 mm x1200 mm &
1,5 m deep incl C.I.cover with frme size 1) A-type
depth 0.90 m for 150 mm, 250 (required dia) sewer
Extra rate for constructing B.B masonry for every
169 6.00 additional depth 0.10 meter or part thereof over item Each 522.96
24.27 (I) for depth from 0.90 meter to 1.50 meter.
Ninety Six Only
Constructing brick masonry chamber for underground
C.I. Inspection chamber and bends with briocks having
croshing strength not less than 35Kg. Cm2 in C.M. 1:5
C.I. cover with frame (Light duty) 455mm x 610mm
intenal dimensions total weight of cover with frame to Rupees Two
be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of Thousand Nine
170 8.00 frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1- Each 2,932.93 Hundred Thirty Two
cement :2- coarse sand :4-graded stone aggregate And Paise Ninety
20mm size) foundation concrete 1:5:10 inside plaster Three Only
15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed
concrete etc. complete.(i) Inside dimensions 455mmx
610mm and 450mm deep for single pipe line
Constructing brick masonry chamber for underground
C.I. Inspection chamber and bends with briocks having
croshing strength not less than 35Kg. Cm2 in C.M. 1:5
C.I. cover with frame (Light duty) 455mm x 610mm
intenal dimensions total weight of cover with frame to
be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of
frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-
171 8.00 Each 3,660.76 Hundred Sixty And
cement :2- coarse sand :4-graded stone aggregate
Paise Seventy Six
20mm size) foundation concrete 1:5:10 inside plaster
15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed
concrete etc. complete.(ii) Inside dimensions 500mm x
700 mm and 450mm deep for pipe line with one or
two inlets. (upto 10 ton)
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Constructing brick masonry chamber for underground
C.I. Inspection chamber and bends with briocks having
croshing strength not less than 35Kg. Cm2 in C.M. 1:5
C.I. cover with frame (Light duty) 455mm x 610mm
intenal dimensions total weight of cover with frame to
be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of
frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-
172 10.00 Each 7,180.44 Hundred Eighty And
cement :2- coarse sand :4-graded stone aggregate
Paise Forty Four
20mm size) foundation concrete 1:5:10 inside plaster
15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed
concrete etc. complete.(iii) Inside dimensions 600mm
x 850mm and 450mm deep for pipe lines with three or
more inlets. (upto 10 ton)
Extra over items 24.44 for every additional depth of
Hundred Forty Two
173 3.00 0.1M. of part thereof beyond 450mm depth for Brick Each 242.39
And Paise Thirty
masonry chamber.(i) for 455mm x 610mm size.
Extra over items 24.44 for every additional depth of
Hundred Sixty Four
174 3.00 0.1M. of part thereof beyond 450mm depth for Brick Each 264.86
And Paise Eighty Six
masonry chamber.(ii) for 500mm x 700mm size.
Extra over items 24.44 for every additional depth of
175 3.00 0.1M. of part thereof beyond 450mm depth for Brick Each 325.59
Five And Paise Fifty
masonry chamber.(iii) for 600mm x 850mm size.
Providing M.S. foot rests including fixing in manholes
with 20 x20 x 10 cm cement concrete blocks 1:3:6 (1
176 6.00 cement :3 coarse sand :6 graded stone aggregate 20 Each 127.77
Seven And Paise
mm nominal size) as per standard design with 20x20
Seventy Six Only
Providing and fixing C.I Manhole cover 0.60 mt x 0.45 Hundred Fifty Eight
mt size having weight not less than 35 Kg. And Paise Seventeen
Providing, laying and fixing 200 mm vide PVC water
stop of approved make and grade thickness in Rupees Three
concrete work for water tightstructures like retaining Hundred Fifty One
walls of pound water body and underground water And Paise Forty
tank including cleaning and placing in line level etc. Eight Only
complete, as directed.
Providing and fixing double coated Sintax or
Rupees Three And
equivalent PVC (ISI) water tank of required capacity
179 50000.00 Liter 3.95 Paise Ninety Five
each with all necessary fittings and connection etc.
complete on terrace.
Providing and fixing Stainless Steel A ISI 304 (18/8)
kitchen sink as per IS : 13983 with C.I. brackets and
stainless steel plug 40 mm, including painting of
fittings and brackets, cutting and making good the
180 3.00 Each 9,858.61 Hundred Fifty Eight
walls wherever required :Kitchen sink without drain
And Paise Sixty One
board 610x510 mm bowl depth 200 mm, Kohler or
Nirali Make Kitchen Sink 610 x 510mm with Sink
spout of wall mounting type, NIRALI - GRACE - PLAIN
Providing & Fixing health faucet with 8 mm dia 1 Mtr.
181 27.00 Each 1,405.92 Hundred Five And
long flexible tube and wall hook as per eic instruction.
Paise Ninety Two
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing and fixing dual flow flush valves etc.
182 34.00 Each 3,379.46 Hundred Seventy
complete as directed by Engineer In Charge.
Providing, laying and jointing in true line and level
110 diametre U.P.V.C (Type B) conforming to IS 13592-
1992 with one end plain and other end socketed with
rubber ring, & fittings conforming to ISI 14735-1999
of approved make for drainage system pipe line, pipe
shall be jointed with each other with rubber lubricant,
Hundred Seventy
183 200.00 pipe shall be fixed on wall using of PVC clamp of the Rmt 876.90
Six And Paise Ninety
size 110 mm diametre x 149 mm length x 145 mm
heigh at every 2000 mm center to center or shall be
concealed in walls as directed including necessary
fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
Providing, laying and jointing in true line and level
160 diametre U.P.V.C (Type B) conforming to IS 13592-
1992 with one end plain and other end socketed with
rubber ring, & fittings conforming to ISI 14735-1999
of approved make for drainage system pipe line, pipe
shall be jointed with each other with rubber lubricant,
184 150.00 pipe shall be fixed on wall using of PVC clamp of the Rmt 834.38
size 160 mm diametre x 210 mm length x 196 mm
Thirty Eight Only
heigh at every 2000 mm center to center or shall be
concealed in walls as directed including necessary
fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
Providing and fixing ECO Drain Pipes in including
supporting the ECO Drain pipe on the bricks at each
Hundred Eighty And
185 216.00 joint including leakproof joints ECO Drain Pipe etc., Rmt 580.75
Paise Seventy Five
Providing and fixing ECO Drain Pipes in including Rupees One
supporting the ECO Drain pipe on the bricks at each Thousand Three
186 220.00 joint including leakproof joints ECO Drain Pipe etc., Rmt 1,370.57 Hundred Seventy
complete And Paise Fifty
300 mm dia.pipe Seven Only
Providing & Fixing C.P.Brass angle valve 15mm etc.
187 25.00 No 509.04 Hundred Nine And
Paise Four Only
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm length, 30cm
height and 15cm thick of M250 grade concret as per
188 122.00 Rmt 402.55 Hundred Two And
approved design and including excavation for fixing in
Paise Fifty Five Only
proper line and level, filling the joint with C:M 1:3
(1cement:3fine sand) etc complete.
Providing and Fixing ABS Plastic SPEED BUMP of Size :- Rupees Two
750 MM x 250MM x75 MM, Per Mtr. # 4 No (2 black, 2 Thousand Nine
189 20.00 yellow),TOP DESIGN – LINE DESIGN ANTI SKID Rmt 2,974.45 Hundred Seventy
PATTERN FOR GRIP fililing CEMENT INSIDE etc. Four And Paise
complete as directed by Engineer-in-charge. Forty Five Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing & Fixing anchor fasteners including drilling Rupees One
in RCC/ Masonary Members, fastening with structural Hundred Eighty Six
steel members etc complete. And Paise Eighty
a) 8 mm dia. Five Only
Providing & Fixing anchor fasteners including drilling Rupees Two
in RCC/ Masonary Members, fastening with structural Hundred Twenty
steel members etc complete. Two And Paise
b)10mm dia. Twenty Only
Providing & Fixing anchor fasteners. including drilling Rupees Three
in RCC/ Masonary Members, fastening with structural Hundred Fifteen
steel members etc complete. And Paise Twelve
c)12mm dia. Only
Providing & fixing of reinforcement bars
(reiforcement bars shall be paid extra under relevant
item of work) after drilling the hole of required
diameter & depth,cleanning of the same, providing/
filling the hole with Injection Mortar inserting
reinforcement bar etc. complete as per Manufacturers
193 50.00 No 104.03 Hundred Four And
& architects instruction.The work shall be carried out
Paise Three Only
by the technical workmens/agency approved by the
manufacturer and under technical supervision of
Manufacturer of Injection grout including all
materials,tool tackles, labour etc. complete.
(a) 8 mm. dia.bar -Holes 12mm dia Depth 100mm
Providing & fixing of reinforcement bars
(reiforcement bars shall be paid extra under relevant
item of work) after drilling the hole of required
diameter & depth, cleanning of the same, providing/
filling the hole with Injection Mortar (HY 150 or
approved equivalant), inserting reinforcement bar etc.
Hundred Thirty Five
194 50.00 complete as per Manufacturers & architects No 135.34
And Paise Thirty
instruction. The work shall be carried out by the
technical workmens/agency approved by the
manufacturer and under technical supervision of
Manufacturer of Injection grout including all materials,
tool tackles, labour etc. complete.
(B) 10 mm. dia.bar -Holes 14mm dia Depth 100mm
Providing & fixing of reinforcement bars
(reiforcement bars shall be paid extra under relevant
item of work) after drilling the hole of required
diameter & depth, cleanning of the same, providing/
filling the hole with Injection Mortar (HY 150 or
approved equivalant), inserting reinforcement bar etc.
195 50.00 complete as per Manufacturers & architects No 167.66
Seven And Paise
instruction. The work shall be carried out by the
technical workmens/ agency approved by the
manufacturer and under technical supervision of
Manufacturer of Injection grout including all
materials,tool tackles, labour etc. complete.
(C) 12 mm. dia.bar -Holes 16mm dia Depth 120mm
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing & fixing of reinforcement bars
(reiforcement bars shall be paid extra under relevant
item of work) after drilling the hole of required
diameter & depth, cleanning of the same, providing/
filling the hole with Injection Mortar (HY 150 or
approved equivalant), inserting reinforcement bar etc.
Hundred Fifteen
196 50.00 complete as per Manufacturers & architects No 215.13
And Paise Thirteen
instruction.The work shall be carried out by the
technical workmens/ agency approved by the
manufacturer and under technical supervision of
Manufacturer of Injection grout including all materials,
tool tackles, labour etc. complete.
(D) 16 mm. dia.bar -Holes 20mm dia Depth 160mm
Providing laying (two level or slopes) and jointing
reinforced concrete light duty, non-pressure pipes I.S. Rupees Three
class NP-2 of the followings internal diameter with Hundred Fifty Nine
collars and butt ends prepared for collar joints And Paise Eighty
including testing of joints complete. Four Only
Supplying and fixing reinforced concrete heavy duty
non-pressure pipes with collars for culverts including
Thousand Seventy
198 500.00 setting and joining the pipes in C.M. 1:2 watering and Rmt 1,077.15
Seven And Paise
laying (to level or slope) of I.S. class NP2 of following
internal diameters.(iii) 450 mm dia.
Providing & Fixing iron steps of size 500mm x 150mm Rupees Two
199 12.00 x 22.5 mm and painting with two coats of No 207.66 Hundred Seven And
anticorrosive paint etc. complete. Paise Sixty Six Only
Rupees Eighteen
Water Tank Overflow Alarm Wired Sensor Security
System with installation providing and fixing all
200 1.00 No 18,404.22 Hundred Four And
necessary installation pipe fitting with 6 sensor and
Paise Twenty Two
controller and cable fitting as well.
Providing and constructing SOAK WELL of 2.50m
internal dia and 6.00 depth depth internal clear
dimention including the cost of execavation,PCC 1:4:8
foundation for honey combed masonary in C.M. 1:4
(1cement : 4 sand), casting R.C.C. 1:2:4 (1cement :
sand : 4 graded stone aggregate 20mm nominal size) Rupees Seventy Five
top slab 12 thick with C.I. manhole cover 600mm x Thousand Seventy
450mm size of 35 Kg. weight and 75mm dia C.I. pipe Eight And Paise
1800mm long with 75mm dia cowel vent and filling Thirty Five Only
the wall 1000mm in depth with dry brick bats
including providing vata in C.M. 1:3 (1cement :
sand), curing including cost of reinforcement etc.
complete as per detailed drawing and directed by
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Construction Septic tank inside dimention of 4.00 m in
length & 2.50 m in width & 2.00 m depth including
excavating any type of soil as shown and mentioned in
the drawing,providing and laying 0.10 m thick plain
cement concrete 1:3:6 (1 cement : 3 coarse sand :
graded stone agg.) 40 mm thick IPS flooring at bottom
with brick masonary 0.23 m thick walls CM 1:5 (1
cement : 5 coarse sand) and intermediate partition CM
Eight Thousand Five
1:4 & RCC Top slabs12 cms thick in 1:2:4 (1 cement :
202 1.00 Each 78,571.94 Hundred Seventy
coarse sand : 4 graded stone agg) including
reinforcement as per design and 15 mm thick cement
Ninety Four Only
plaster in CM 1:4 with floating coat of neat cement
slurry inside, top and around tank below 15 cm on
ground level, Also provide Two No CI Manhole frame
and cover of size 60 cm x 45 cm & 75 mm dia. PVC
Kg.f/ Sq cm pressure air vent pipe in 3.00 length with
cowl etc complete as per direction of Engineer in
Rupees Thirty Six
Hording Erection of approved size (20' x 10')
including 2" MS square pipe/ gurder,1.5" pipe framing
203 1.00 No 36,418.58 Hundred Eighteen
G.I sheet 26 or 28 gauge, Flex. as per the Architect's
And Paise Fifty Eight
instructions & approval.
Providing and fixing bright finish 2 mm thick Stainless
steel (Grade 304) letters size up to 350 cm height in
Hundred Forty Two
204 10.00 English language fixed in wall with screws and nails No 542.37
And Paise Thirty
and any height including scaffolding etc complete as
per instruction of Engineer-in-charge.
Providing and fixing chromium plated brass half turn
Hundred Sixty Three
205 28.00 flush cock of approved quality including fixing in pipe Each 263.77
And Paise Seventy
line etc. complete. (ii) 25 mm dia
Providing and fixing screw down bib taps of following
Hundred Eighty Six
206 65.00 size : (B) Brass chromium plated screw down bib tap Each 186.83
And Paise Eighty
R.O. SYSTEM 250 LPH Rupees One Lakh(s)
Providing and supplying, testing and commissioning of Eighty Five
RO System of 250 LPH Plant with all instalation Thousand Eight
charges and pipeing charges including of Hundred Eighty Two
transportation loading, unloading, automatiion with And Paise Forty
product water tank with 1000 liter storage tank. Three Only
Providing and fixing G.I. Rain water spout of 50mm Hundred One And
dia. and 30cm. length. Paise Ninety One
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
(B) Grid Tied Solar Power System: 11-25 kW (3 -
Supply, Installation, Testing & Commissioning of
following size of Grid Tied Solar Power Plant with
Solar Panels (ALMM approved): Frame Material :
Anodized Aluminum alloy Frame With Twin Wall
Profile, Front Cover : High Transmission Low-Iron
Tempered Glass (AR Coated), High efficency and
positive power tolerance Pmax: 0/+5, Module
Efficiency should be approx. 18%-21%, Normal
operating temperature 45'C, Junction Box with
Waterproof IP67 & MC4 Compatible and Enclosed Rupees Forty Two
with Bypass diodes, 100% Electroluminescence test to Thousand Four
209 25.00 ensure error free Modules, Thep. temp. co-efficient of KW 42,455.35 Hundred Fifty Five
the PV module shall equal or better than - And Paise Thirty
0.45%/degree C. Solar PV modules of minimum fill Five Only
factor 75% to be used. Unit Production:- 4 to
Unit/kw/day (Actual)(1Year Avg) With 10 year
Product warranty and 25 year Linear Power
Solar Inverter: MPPT Range: 80-1000 V, Max
efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz,
Operating Altitude (m) ≤4000, O/p Power Factor: ~1,
O/P THDi: <3%, Operating Tempreture Range: -
25~60°C, Anti-islanding Protection:
(Excluding GEDA Application fees, Solar connectivity
Charges, Meter connectivity Charges, Meter testing
S.I.T.C of Poly Crystline/Mono Crystline PV Module
(ALMM approved) with 72 Cells - 150 Cells or More,
Frame Material : Anodized Aluminum alloy Frame
With Twin Wall Profile, Front Cover : High
Transmission Low-Iron Tempered Glass (AR Coated),
High efficency and positive power tolerance Pmax:
0/+5, Module Efficiency should be approx. 18%-21%,
Normal operating temperature 45'C, Junction Box with
Waterproof IP67 & MC4 Compatible and Enclosed
Rupees Thirty Three
with Bypass diodes 100% Electroluminescence test to
210 10000.00 Watt 33.33 And Paise Thirty
ensure error free Modules, Thw temp. co-efficient of
the PV module shall equal or better than -
0.45%/degree C. Solar PV modules of minimum fill
factor 75% to be used. Unit Production:- 4 to
Unit/kw/day (Actual)(1Year Avg) With 10 year
Product warranty and 25 year Linear Power
(E) Moudule o/p Range: 520 - 545 watt, Maximum
Power Voltage Vmpp: 41 - 42 V, Maximum Power
Current Impp: 12.5 - 13 A
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
S.I.T.C of Solar Inverter Gried Tied: MPPT Range: 80-
1000 V, Max efficiency: 97.5% - 98.9%, O/p
Frequency: 50/60Hz, Operating Altitude (m) ≤4000,
O/p Power Factor: ~1, O/P THDi: <3%, Operating
Tempreture Range: -25~60°C, Anti-islanding
Protection: Integrated, Input Reverse Polarity
Protection Integrated, Insulation Resistor Detection
Integrated, Residual Current Monitoring Unit
Rupees Nine And
211 10000.00 Integrated, Output Over Current Protection Integrated, Watt 9.09
Paise Nine Only
Output Short Circuit Protection Integrated, Output
Over Voltage Protection Integrated, Protection Degree:
IP65, User Interface LCD & APP,Datalogger &
Communication: GPRS/ Wi-Fi (Optional)
(C) Solar Inverter: 6 kW to 15 kW: Max. input Current:
22 A, Max DC i/p Power: 7800-19500 W & Nominal
o/p Power: 6000-16500 W, Nomimal O/p Voltage:
400 V 3-Phase, Nominal O/p Current: 10-24A,
Supplying and Erecting Seamless Box Pipe of suitable
size for rooftop solar installations with good stability
agaist wind, Thickness 2 mm and 80 micron, Hot
Dipped Galvanized steel coils. suitable arrangement
for base plate for foundation, solar panel mounting, Rupees One
the structure should be suitable for carry the load of Hundred Thirty One
solar panel,wiring, sprinkler system etc. with And Paise Thirty
necessary foundation work/wall mount, j bolt, anchor Only
fastner etc. the nut bolt used for installtion of stucture
should be (SS 304) quality.
box. pipe ref. size (A) 40 x 40 x 2mm, (B) 50 × 50 ×
DC Cable: Electron beam cross linked compound,UV,
Ozone, Temperature & Hydrolysis resistant Flame
Retardant, Low Smoke Excellent Encapsulation
Very long/ Service life >
Standards/ Material Properties:
Fire performance : IEC 60332-1-2
Smoke emission : IEC 61034/ EN 50268-2 Rupees Seventy Six
213 300.00 Halogen Free: EN 50267-2-1/-2, IEC 60754-2 Mtr. 76.76 And Paise Seventy
Toxicity: EN 50305, ITC – Index <3 Six Only
Ozone Resistant : EN50396
Weathering UV: HD 605/A1 or DIN
Approvals : EN 50618; H1Z2Z2-k
with suitable sized of PVC pipe(ISI Mark) and Clamps,
(B) 1 core 4 Smtm copper DC cable Colour Black
S.I.T.C of Distribution board from AC Side,ACDB 3-
Phase - 21 kW - 50 kW: AC1 DUTY CONTRACTOR‐80A
Rupees Eighteen
4P, 100A MCCB 4P(Cat III), 3 PHASE SPD, VOLTAGE
MONITORING RELAY, ELR WITH CBCT, PHASE
214 1.00 EA 18,146.67 Hundred Forty Six
INDICATING LAMP, POWER CABLE & OTHER
And Paise Sixty
ACCESSORIES, All switchgears and connection are
enclosed with IP66 Enclosure and operate the
S.I.T.C of Distributiob System DC Side, DCDB - 20 kW - Rupees Fourteen
25 kW (5in:5out) : Input Mcb - 1000 V, 16 Amp, 1000 Thousand Seven
215 1.00 V DC SPD TYPE 2, TERMINAL/END,PLATE/END EA 14,723.78 Hundred Twenty
CLAMP: 4SmtM (KUT6) FOR OUTPUT, DC CABLE With Three And Paise
suitable size of interconnection. Seventy Eight Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supplying & Errecting MC4 Connector Male - Female Rupees Fifty Two
216 10.00 Set for Solar DC Cable which is installed in Solar PV- EA 52.52 And Paise Fifty Two
module/Inverter/DCDB etc. Only
Electric Motor Driven Hydrant and Sprinkler Pump
Location - Plant Room
Providing,Installing, testing and commissioning of Fire
authority approved Electrical driven fire pump
suitable for automatic/ manual operation consisting of
the following-Rates for erection of pump only End
Suction, high pressure, single/ multistage centrifugal
type fire pump having cast iron body, bronze impeller,
stainless steel shaft & capable of delivering 2280LPM
(38 LPS) against a total head of 60Mtr. while running
at 2900 RPM complete with proper connection to
suction and delivery line, and including bypass Rupees Two Lakh(s)
arrangement for testing of pumps as per the Seventy Two
217 1.00 requirement. Suitable mechanical seal with mounting set 2,72,195.00 Thousand One
aggangement shall be included, having a name plate Hundred Ninety
indicating suction, delivery, head, discharge, stages, Five Only
RPM and direction of rotation. Pump shall be capable
of furnishing not less than 150% of rated capacity at a
head not less than 65 % of rated head. The shut off
head shall not exceed 120% of rated head. Squirrel
cage, induction motor, TEFC type suitable for 415 +
10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating
for the above pump with synchronous speed of
RPM conforming to IP 55 protection & class 'F'
insulation. The motor shall conform to IS 325
(up to date) with flexible coupling and coupling guard.
Factory Fabricated
Electrical Common
Motor Driven base
Jockey plateFor
Pump forHydrant
Sprinkler System Location - Plant Room
Providing,Installing, testing & commissioning of fire
authority approved electrically driven Jockey pump
suitable for automatic/ manual operation consisting of
Vertical mounted multistage jockey pump having cast
iron body, S.S. impeller, stainless shaft with
mechanical seal capable of delivering 180 LPM against
total head of 60 Mtr. while running at 2900 RPM
complete. The system shall be complete with
necessary pressure gauge with gun metal shut off cock
Rupees Sixty Eight
on delivery side including bypass arrangement for
218 1.00 testing of working of the pumping set as required. The set 68,680.00
pump should meet the requirement of IS 15105:2002
and must be approved by the local fire authority.
Squirrel cage induction motor suitable for 415 +
10%V, 3 phase, 50 Hz, AC supply of suitable HP rating
for the above pump with synchronous speed of
RPM T.E.F.C type connected to pump with flexible
coupling and coupling guard.
Factory fabricated Common base plate for mounting
pump and motor fabricated of mild steel channel as
per manufacturer's recommendation with heavy duty
4 No Anti Vibration pads.(Cushy foot). grouting bolts
to be provided and installed by the vendor at his cost.
Suitable reinforced cement concrete pump
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Diesel Engine Driven Fire Pump For Hydrant &
Sprinkler System [Stand by pump] Location - Plant
Providing, Installing, testing & commissioning of fire
authority approved Diesel Engine driven fire pump
suitable for automatic/manual operations consisting
of the following: Horizontal split casing, high pressure
single/ multistage centrifugal type fire pump having
cast iron body, bronze impeller,stainless steel shaft &
capable of delivering 2280 LPM (37 LPS) against a
total head of 60 M while running at 2300 RPM
complete with proper connection to suction and Rupees Six Lakh(s)
delivery line, and including bypass arrangement for Seventeen
219 1.00 testing of pumps as per the requirement. Mechanical set 6,17,615.00 Thousand Six
seal shall be included, having a name plate indicating Hundred Fifteen
suction, delivery, head, discharge, stages, RPM and Only
direction of rotation. Stainers at pump input shall be
provided as per manufacturer requirements. Pump
shall be capable of furnishing not less than 150% of
rated capacity at a head not less than 65% of the rated
head. The shut off head shall not exceed 120% of rated
head. Water cooled heat exchanger type diesel engine
of required BHP or as per manufacturer at 1500 RPM
for the above pump complete with standard
accessories & suitable cooling system as described in
specifications. Common base plate for mounting pump
& engine of required strength manufactured out of
Providing, fixing, testing and commissioning of air
vessel (size 350 mm dia & 1500 mm height) fabricated
shell from 8 mm thick & dished end 10 mm thick M.S.
Plate for pressurization of hydrant/ sprinkler/curtain
nozzle system complete with adequate pressure Rupees Fifty Four
220 1.00 switches (as per design/ requirement) with valve to set 54,540.00 Thousand Five
operate as per operating sequences including 50 mm Hundred Forty Only
dia drain valve, 25 mm dia safety valve, 25 mm dia
inlet with isolating valve duly painted from inside and
out side complete as required. (For Hydrant/Sprinkler
& curtain nozzle system).
Fire pump panel (Combined for All Pumps) and
electrical works - Starter panel with star delta or as
per CFO approved starters rated to suite pump HP
with necessary protection feautres like SPP/ ELR/ OL/
SC/ phase and on off indicating lamps. The busbars
shall be of Al - 0.8 A/ sq mm size. Panel shall be
fabricated from 14G sheet steel with seven tank
process powder coated and shall be min IP 52. Panel
shall have Ammeter/ Voltmeter and KWh meter.
Cabling/ earthing from panel to pump shall be scope
of vendor without any extra cost. Cabling - supply/ Rupees One Lakh(s)
laying and terminating, shall be Al XLPE armoured/ Cu Eighty Thousand
XLPE armoured/ as per manufacturers specifications Two Hundred Eighty
with necessary terminal box to terminate the cables. Five Only
Panel shall be rated min for 25KA fault level. Cable
trays - hot dip GI ladder type 16 gauge with required
supports shall be used for cabling. Panel shall have one
incomer MCCB/ ACB of required rating where by
incoming supply and earthing shall be terminated by
electrical contractor.Starters shall be suitable for
respective motors.panel to take inputs from pressure
switch/on-off switch. Flow switch wiring shall be in
suitable mms pvc consuits. Panel should be
manufactured by CPRI approved panel builder
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing and fixing of dial type Pressure Guage
222 3.00 having 100 mm dial & range of 0-16 Kg./cm2 with Each 1,515.00
Hundred Fifteen
syphon and cock.
223 3.00 Providing and fixing of dial type Pressure Switch. Each 1,767.50 Hundred Sixty
Seven And Paise
Providing and fixing, testing and commissioning of CI
Buterfly valve (PN 16) with integrally moulded linear
224 6.00 of nitrile or EPDM. Stainless steel Disc & Steam Lever Each 5,257.05
Hundred Fifty Seven
operated with ISI Marked as required.
And Paise Five Only
Providing and fixing, testing and commissioning of CI
Buterfly valve (PN 16) with integrally moulded linear
225 3.00 of nitrile or EPDM. Stainless steel Disc & Steam Lever Each 3,100.70
Hundred And Paise
operated with ISI Marked as required.
Providing and fixing, testing and commissioning of CI Rupees Two
Buterfly valve (PN 16) with integrally moulded linear Thousand Five
226 3.00 of nitrile or EPDM. Stainless steel Disc & Steam Lever Each 2,514.90 Hundred Fourteen
operated with ISI Marked as required. And Paise Ninety
80 mm dia. Only
Providing and fixing, testing and commissioning of CI Rupees Two
Buterfly valve (PN 16) with integrally moulded linear Thousand Two
227 1.00 of nitrile or EPDM. Stainless steel Disc & Steam Lever Each 2,272.50 Hundred Seventy
operated with ISI Marked as required. Two And Paise Fifty
65 mm dia. Only
Providing, fixing, testing and commissioning of CI dual Rupees Five
plate non-return valve (PN 16) of following sizes Thousand Four
228 3.00 conforming to IS: 5312 complete with rubber gasket, Each 5,484.30 Hundred Eighty
GI bolts, nuts, washers etc. as required. Four And Paise
150 mm dia. Thirty Only
Providing, fixing, testing and commissioning of CI dual Rupees Two
plate non-return valve (PN 16) of following sizes Thousand Six
229 1.00 conforming to IS: 5312 complete with rubber gasket, Each 2,676.50 Hundred Seventy
GI bolts, nuts, washers etc. as required. Six And Paise Fifty
65 mm dia. Only
Providing and fixing, testing and commissioning of
Thousand Seventy
230 1.00 C.I.Y-Strainer/ Foot valve class (PN 16) rating of size Each 10,079.80
Providing, fixing, testing and commissioning of above
ground G.I. Class-C pipes as per IS: 1239 and IS:
with pipe fittings (Upto & Including 50 NB Socket weld
fittings & 65 NB above butt weld fittings) including all
require supports, hanger rods, Beam clamp, L Patti,
231 40.00 nut bolt,structural steel etc. with thickness to be as per RM 2,530.05
Hundred Thirty And
standard complete.painting of one coat of rich zinc
Paise Five Only
primer and 2 or more coats of synthetic enamel paint
of approved make/ shade complete as per
specification.(Apporx Qty)
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing, fixing, testing and commissioning of above
ground G.I. Class-C pipes as per IS: 1239 and IS:
with pipe fittings (Upto & Including 50 NB Socket weld
fittings & 65 NB above butt weld fittings) including all Rupees One
require supports, hanger rods, Beam clamp, L Patti, Thousand Five
232 40.00 nut bolt,structural steel etc. with thickness to be as per RM 1,555.40 Hundred Fifty Five
standard complete.painting of one coat of rich zinc And Paise Forty
primer and 2 or more coats of synthetic enamel paint Only
of approved make/ shade complete as per
specification.(Apporx Qty)
Providing, fixing, testing and commissioning of above
ground G.I. Class-C pipes as per IS: 1239 and IS:
with pipe fittings (Upto & Including 50 NB Socket weld
fittings & 65 NB above butt weld fittings) including all
require supports, hanger rods, Beam clamp, L Patti,
Thousand Eighty
233 100.00 nut bolt,structural steel etc. with thickness to be as per RM 1,085.75
standard complete.painting of one coat of rich zinc
Seventy Five Only
primer and 2 or more coats of synthetic enamel paint
of approved make/ shade complete as per
specification.(Apporx Qty)
Providing, fixing, testing and commissioning of above
ground G.I. Class-C pipes as per IS: 1239 and IS:
with pipe fittings (Upto & Including 50 NB Socket weld
fittings & 65 NB above butt weld fittings) including all
require supports, hanger rods, Beam clamp, L Patti,
Hundred Seventy
234 70.00 nut bolt,structural steel etc. with thickness to be as per RM 878.70
Eight And Paise
standard complete.painting of one coat of rich zinc
primer and 2 or more coats of synthetic enamel paint
of approved make/ shade complete as per
specification.(Apporx Qty)
Providing, fixing, testing and commissioning of above
ground G.I. Class-C pipes as per IS: 1239 and IS:
with pipe fittings (Upto & Including 50 NB Socket weld
fittings & 65 NB above butt weld fittings) including all
Rupees Six Hundred
require supports, hanger rods, Beam clamp, L Patti,
235 80.00 nut bolt,structural steel etc. with thickness to be as per RM 691.85
Paise Eighty Five
standard complete.painting of one coat of rich zinc
primer and 2 or more coats of synthetic enamel paint
of approved make/ shade complete as per
specification.(Apporx Qty)
Providing, fixing, testing and commissioning of above
ground G.I. Class-C pipes as per IS: 1239 and IS:
with pipe fittings (Upto & Including 50 NB Socket weld
fittings & 65 NB above butt weld fittings) including all
require supports, hanger rods, Beam clamp, L Patti,
Hundred Thirty And
236 220.00 nut bolt,structural steel etc. with thickness to be as per RM 530.25
Paise Twenty Five
standard complete.painting of one coat of rich zinc
primer and 2 or more coats of synthetic enamel paint
of approved make/ shade complete as per
specification.(Apporx Qty)
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing, fixing, testing and commissioning of above
ground G.I. Class-C pipes as per IS: 1239 and IS:
with pipe fittings (Upto & Including 50 NB Socket weld
fittings & 65 NB above butt weld fittings) including all
require supports, hanger rods, Beam clamp, L Patti, Rupees Three
237 550.00 nut bolt,structural steel etc. with thickness to be as per RM 353.50 Hundred Fifty Three
standard complete.painting of one coat of rich zinc And Paise Fifty Only
primer and 2 or more coats of synthetic enamel paint
of approved make/ shade complete as per
specification.(Apporx Qty)
Providing and fixing 25 mm dia inspection & testing
assembly with Test valve, sight glass, drain valve
238 4.00 (Ball valve 50mm dia) union with corrosion resistant Each 6,565.00
Hundred Sixty Five
orifice & connection to drain (All complete stricitly as
Providing and fixing of UL listed electrically operated
Flow indicating switch (vane type) of following
diameter with threaded connection with flexible full Rupees Five
bore paddle & NO/NC contact terminals as specified Thousand Fifty Only
complete with all accessories and necessary wiring.
Providing and fixing of UL listed electrically operated
Flow indicating switch (vane type) of following
diameter with threaded connection with flexible full Rupees Five
bore paddle & NO/NC contact terminals as specified Thousand Fifty Only
complete with all accessories and necessary wiring.
Providing, fixing, testing and commissioning of anti
corrosive treatment for under ground pipes with
coats of asphaltic primer and wound with polymeric Rupees Four
tap of thickness 4 mm with 15 mm overlaping as per Hundred Four Only
Providing, fixing, testing & commissioning of Stainless
steel single headed ISI marked oblique pattern
hydrant/ landing valves with 80mm dia flanged inlet & Rupees Three
63 mm dia instantaneous type female outlet complete Thousand One
with stainless steel cap and GI chain, twist release type Hundred Thirty One
plug, and all accessories as per IS : 5290 -1983 (Type Only
'A') including fixing with anchor fasteners and flanged
Providing supply, erection, commisioning and testing
of First aid hose reel drum wall mounted, swinging
type as per IS:884 and & comprising of 3 ply rubber
hose of length specified in schedule of items, 20 mm
(3/4") nominal bore (25 Kg./cm2/350 psi bursting
pressure), mild steel pressed reel with 170 degree
swinging, nozzle of G M chromium plated, with non-
243 5.00 jamming controlling handle which shall stay at the Each 5,302.50
Hundred Two And
`ON' `OFF' position as set, wall brackets with `U'
Paise Fifty Only
shaped reel carrier made of C I complete with 25 NB G
M valve at the inlet, and fitted with 20mm dia x
meters long high pressure rubber hose pipe with
adequate M.S. bracket for holding hose reel drum
fitted in position on wall complete as required inside
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing, fixing, testing and commissioning of Rupees One
Standard SS branch pipe with nozzle of 20 mm Thousand Two
nominal bore outlet as per IS:903 suitable to fit with Hundred Sixty Two
standard instanteneous type 63 mm dia coupling. And Paise Fifty Only
Providing, fixing, testing and commissioning of
Weather proof standard fire hose cabinet stand
mounting type (750 mm x 600 mm x 300 mm deep)
245 5.00 having single or double opening with M.S. Fabricated Each 3,838.00
Stand, necessary locking arrangement by allan key
suitable for housing 1 No hose pipe, 1No Branch pipe
& nozzle spaner.
Providing, fixing, testing and commissioning of 2 No
63 mm dia 15m long RRL hose pipe with 63 mm dia.
246 5.00 Male and female gun metal couplings duly binded with Each 5,656.00
Hundred Fifty Six
GI wire, rivets etc. conforming to IS 636 (type-A) as
Supplying, fixing, testing and commissioning of 4 way
fire brigade connection of cast iron body with 2 No
247 1.00 gun metal instanteneous inlet couplings complete with Each 6,060.00
Thousand Sixty Only
cap and chain as required for 150 mm dia MS pipe
connection, conforming to IS 904 as required.
Providing, fixing, testing and commissioning of gun
248 2.00 metal air release valve with connection in the riser & Each 1,464.50
Hundred Sixty Four
And Paise Fifty Only
Getting Approval of Fire Hydrant system from local
fire authority and any other relevant statutory
authority at initial and various other stages of work,
including preparation of report/drawings as per fire
249 1.00 Job Rupees Nil
authority. Contractor shall include cost of all liason
work which are not explicitly mentioned above but are
mandatory to have fire authority approval (*any
statutory charges will be paid extra).
Providing and fixing of 15 mm dia quartzoid bulb type
brass sprinkler head(UL Approved)suitable for
sustaining pressure on seat & water hammer effect.
250 350.00 Each 252.50 Hundred Fifty Two
The type and temperature rating shall be as
And Paise Fifty Only
follows.(Apporx Qty)
15 mm dia - Pandent type sprinkler 57 oC Rating
Providing and fixing of 15 mm dia quartzoid bulb type
brass sprinkler head(UL Approved)suitable for Rupees Three
sustaining pressure on seat & water hammer effect. Hundred Twenty
The type and temperature rating shall be as Eight And Paise
follows.(Apporx Qty) Twenty Five Only
15 mm dia - Upright type sprinkler 57oC Rating
Providing AUTOGLOW Signages in Block/ Small
Hundred Seventeen
252 4.00 Letters of Specified Sizes: Each 217.15
And Paise Fifteen
Fire lift size: 4" X 12"
Providing AUTOGLOW Signages in Block/ Small
Hundred Seventeen
253 4.00 Letters of Specified Sizes: Each 217.15
And Paise Fifteen
Fire Hydrant: 4" X 12"
Providing AUTOGLOW Signages in Block/ Small Rupees One
254 4.00 Letters of Specified Sizes: Each 151.50 Hundred Fifty One
"DCP" Extinguisher: 8" X 4" And Paise Fifty Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing AUTOGLOW Signages in Block/ Small Rupees One
255 4.00 Letters of Specified Sizes: Each 151.50 Hundred Fifty One
"CO2" Extinguisher: 8" x 4" And Paise Fifty Only
Providing AUTOGLOW Signages in Block/ Small
Hundred Seventy
256 4.00 Letters of Specified Sizes: Each 277.75
Seven And Paise
In case of Fire, do not use lift, use staircase: 8" x 8"
Seventy Five Only
Providing AUTOGLOW Signages in Block/ Small Rupees One
257 6.00 Letters of Specified Sizes: Each 151.50 Hundred Fifty One
Fire Exit 8" x 8" And Paise Fifty Only
Providing & fixing monoamonium phosphate base Rupees One
stored pressure type Dry Chemical Powder Thousand Four
Extinguisher of capacity 6 Kg. as per IS 15683 with Hundred Fourteen
hanging bracket & accessories. Only
Providing & fixing Carbon Dioxide type Fire Rupees Three
Extinguisher of capacity 4.5 Kg. as per IS 15683 with Thousand Six
squeze grip type operation with swivel horn, hanging Hundred Eighty Six
bracket & accessories. And Paise Fifty Only
Providing and fixing of fire alarm and pump trigger
system as per requirement and specification
260 4.00 No 454.50 Hundred Fifty Four
consisting of following items
And Paise Fifty Only
Manual call point:
Providing and fixing of fire alarm and pump trigger
system as per requirement and specification Rupees Five
consisting of following items Hundred Five Only
Providing and fixing of fire alarm and pump trigger
system as per requirement and specification
262 5.00 No 454.50 Hundred Fifty Four
consisting of following items
And Paise Fifty Only
Pump On/ Off switch:
Providing and fixing of fire alarm and pump trigger
system as per requirement and specification Rupees One
263 120.00 consisting of following items Mtr. 161.60 Hundred Sixty One
4 core 1.5 sq.mm cu. Flexinble wire with pvc pipe & And Paise Sixty Only
hardware for pump on/off switch (Apporx Qty)
Providing and fixing of fire alarm and pump trigger
system as per requirement and specification
Rupees Ninety And
264 150.00 consisting of following items Mtr. 90.90
Paise Ninety Only
2 core 1.5 sq.mm cu. Flexinble wire with pvc pipe &
hardware for MCP/HOOTER(Apporx Qty)
Providing and fixing of control panel 2 zone for fire
265 1.00 alarm & pump trigger system complete as per the Each 5,050.00
Thousand Fifty Only
requirement of the system.
Providing and fixing M.S. structural work fabricated
from standard sections, (MS rounds, angles, channels
etc.) including cutting to size, drilling, welding,
including cost of fasteners, clamps in RCC structural Rupees One
members as directed, including two or more coats of Hundred One Only
synthetic paint over one coat of primer after surface
preparation including cutting and making good walls
(Structural other than pipe supoort).
Providing, installation, testing and commissioning of
Rupees One Lakh(s)
loop addressable type fire alarm panel which shall be
267 1.00 Each 1,51,500.00 Fifty One Thousand
operated on 230 V, 50 Hz with battery charger &
Five Hundred Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing, Installation, Testing and Commissioning of Rupees One
addressable smoke detectors,it shall support base Thousand Seven
268 105.00 mounted isolator modules and the detectors shall have Each 1,767.50 Hundred Sixty
Led for Indication and output for reaponse indicator Seven And Paise
complete as required Fifty Only
Providing, Installation, Testing and Commissioning of
addressable Fixed Temperature and Rate of Rise Heat
Detectos,it shall support base mounted isolator
269 6.00 Each 1,767.50 Hundred Sixty
modules and the detectors shall have Led for
Seven And Paise
Indication and output for reaponse indicator complete
Providing, Installation, Testing and Commissioning of Thousand Four
270 12.00 addressable looped power type manual break glass Each 2,499.75 Hundred Ninety
unit with ressettable key. Nine And Paise
Seventy Five Only
Providing, Installation, Testing and Commissioning of Thousand Two
271 12.00 addressable looped power type strobe combined Each 3,257.25 Hundred Fifty Seven
hooters 120 db output. And Paise Twenty
Providing & Laying of 2C X 1.5 Sq. mm. Cu. Armoured Hundred Thirty One
Cable including Screw, grip, shaddle etc. (Apporx Qty) And Paise Thirty
Providing, fixing, testing and commissioning of Fire
Draw off Connection as per IS: 904 having 100 mm dia
273 1.00 inlet with 100 mm dia Butterfly valve necessary No 15,857.00
Hundred Fifty Seven
fittings, flanges, nutbolts, gasket and all required
Supplying, Installation, Testing and commissioning of
Hundred Fifty Six
274 100.00 2 C X 1.5 Smtm Copper Armoured for Flow Switch Mtr. 156.55
And Paise Fifty Five
Cabling from Announciation panel to Flow Switch.
Providing, fixing, testing and commissioning of
Annunciator panel for flow control switch, providing
Audio/Visual indicating of actuation of automatic Rupees Five
sprinkler system for each zone complete as per Thousand Seven
specifications with provision for 10 zones "Indication Hundred Fifty Seven
of zone fire", Indication of zone fault, "Fire/Fault Only
hooter", Alarm cancel for fire/fault, "Battery for
Providing, fixing, testing and commissioning of SS
Flexible drops 1200mm Long. Unbraided, Maximumm
Service pressure 175PSI,. Sprinkler Flexible Drop
276 40.00 system is a ready to use assembly to fit sprinkler No 1,414.00
Hundred Fourteen
heads in desired location in a suspended ceiling. It
easily positions the sprinkler in center of the ceiling
tile at a correct height.
Supply, fixing of Rosser Plate cap for sprinkler heads
Hundred Seventy
Three And Paise
mounted at false ceiling/ vertical.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Point wiring for Light/ Bell with 2-1.5 sq.mm & earth
wire of 1.5 sq.mm (Green) both are of ISI marked
KV grade FRLS PVC insulated multi strand copper
wires up to 10 Mtr. length, in below type of pipe
erected with 6A Modular type switch/ bell push &
accessories and earth continuity of following type,
Hundred Forty Nine
278 500.00 erected on PVC/ Metallic/ Wooden box, single Pt. 449.45
And Paise Forty Five
mounting base frame covered with textured/ metallic/
white front plate modules erected on/ in wall/ ceiling
as per pipe erected, with necessary Lamp holder/
ceiling rose/ H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ ceiling complete Cat. III
Point wiring for FAN with 2-1.5 sq.mm & earth wire of
1.5 sq.mm (Green) both are of.ISI marked 1.1 KV
Grade FRLS PVC insulated multi strand copper wires
up to 10 Mtr. length, in below type of pipe erected
with 6A Modular type switch and hum free EME step
type electronic fan regulator mounted and accessories Rupees Six Hundred
with earth continuity of following type erected on Twenty Nine And
PVC/ Metallic/ Wooden box, single mounting base Paise Twenty Three
frame covered with textured/ metallic/ white front Only
plate modules erected on/ in wall/ ceiling as per pipe
erected. with necessary ceiling rose/ H.D.Connector as
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ ceiling complete Cat-III
Point wiring for Individual Plug with & earth wire of
1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires up to
Mtr. length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on Rupees Four
PVC/ Metallic/ Wooden box covered with appropriate Hundred Seventy
front plate modules erected on/ in wall/ ceiling as per Three And Paise
pipe erected with following type of accessories. Sixty Nine Only
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.
Wire from nearby switchboard/ mcb db board
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ ceiling completeCat-III
Point wiring for on board Looped Plug with 6A
Modular type switch & 5 pin socket erected on PVC/ Rupees Two
Metallic/ Wooden box, single mounting base frame Hundred Forty One
covered with textured/ metallic/ white front plate And Paise Thirty
modules erected on/ in wall/ ceiling with following Nine Only
type accessories. Cat.III
Providing following type of Modular Type Accessories
mounted with PVC/ metallic/ Wooden box, single
mounting base frame covered with textured/ metallic/
Hundred Seventy
282 195.00 white front plate, modules erected with necessary Pt. 172.71
connections as per site situation directed by Engineer
Seventy One Only
(9) 16 Amp. SP one way switch Cat.III
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing following type of Modular Type Accessories
mounted with PVC/ metallic/ Wooden box, single
mounting base frame covered with textured/ metallic/
Hundred Ninety And
283 195.00 white front plate, modules erected with necessary Pt. 190.89
Paise Eighty Nine
connections as per site situation directed by Engineer
(10) 6/ 16Amp. Universal socket Cat.III
Point wiring for Two Way Controlled Light Point with
2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both
are of.ISI marked 1.1 KV grade FRLS PVC insulated
multi strand copper wires erected in below type of
pipe with 6A Modular type switches and following
type of accessories erected on PVC/ Metallic/ Wooden
box, single mounting base frame covered with
284 10.00 Pt. 560.55 Hundred Sixty And
textured/ metallic/ white front plate modules erected
Paise Fifty Five Only
on/ in wall/ ceiling as per pipe erected. with necessary
batten/ angle holder or ceiling rose or H.D.Connector
as directed.ss will be considered as Mains for
Secondary Point.
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ ceiling complete Cat-III
Point wiring for secondary light point with 2-1.5
sq.mm & earth wire of 1.5 sq.mm (green) both are of
ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires, in below type of pipe to be
erected complete with earth continuity and necessary
connection with primary light with accessories erected
on Metal/ PVC/ wooden box covered covered with
appropriate front plate modules erected on/ in wall/
285 35.00 Pt. 151.50 Hundred Fifty One
ceiling for open/ concealed wiring. with necessary
And Paise Fifty Only
Lamp holder/ ceiling rose/ H.D.Connector as
directed.as per pipe erected with following type of
accessories.Note:- Maximum up to 6 Mtr.s length,
excess will be considered as Mains for Secondary
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ ceiling complete Cat-III
Providing following type of Modular Type Accessories
mounted with PVC/ metallic/ Wooden box, single
mounting base frame covered with textured/ metallic/ Rupees One
white front plate, modules erected with necessary Hundred Fifty Three
connections as per site situation directed by Engineer And Paise Fifty Two
In charge. Only
(3) Two Pin/ RJ-11 Telephone Socket [A] For One
(4) TV Co-axial Socket outlet Hundred Fifty Three
Cat-III And Paise Fifty Two
Rupees Twenty Four
(7) Blank Plate Single
288 10.00 No 24.24 And Paise Twenty
(8) Computer Open RJ-45 socket Hundred Fifty Three
Cat-III And Paise Fifty Two
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Hundred Fourteen
290 4.00 (19) Modular Indicating Call Bell Cat.III EA 314.11
And Paise Eleven
291 4.00 (20) Modular Buzzer Cat.III EA 143.42
Three And Paise
Conduits & Pipes
Providing and erecting ISI mark Medium class RIGID
PVC PIPES of following size complete to be erected
on/ in wall or ceiling erected with necessary PVC
292 100.00 Mtr. 23.23 Three And Paise
fittings & Junction boxes fixed with adhesive solution
Twenty Three Only
& Clamps with following dia of pipes, in approved
manner as directed
Rupees Thirty Two
293 500.00 b) 25 mm Mtr. 32.32 And Paise Thirty
Rupees Fifty Two
294 10.00 c) 32 mm Mtr. 52.52 And Paise Fifty Two
Providing & erecting PVC Corrugated Flexible Conduit
with required No. of coupling, PVC bushes, Check-nuts Rupees Sixteen And
etc. complete of following sizes. Paise Sixteen Only
Rupees Twenty And
Paise Twenty Only
Supplying & erecting UPVC Mini trunking (PVC Casing-
n-Capping) having double-locking arrangement with
grooves, trunking of size not below 12.5 mm in height
Rupees Thirty And
297 10.00 as per IS with accessories of PVC/ Resin Mtr. 30.30
Paise Thirty Only
polypropylene not below 1.8 mm thick duly sealed in
joint & erected on wall/ ceiling of following size.
Supplying and laying UPVC cable trunking system
comprising unplasticised polyvinyl, chloride rigid
material with ignition free and flame proof confirming
Hundred Eighty And
298 200.00 BS with necessary end caps Internal and external Mtr. 180.79
Paise Seventy Nine
bend, flat bends, coupler, tee etc. All necessary
accessories and measuring of following sizes
(3) 50 mm x 50 mm trunking
Providing and erecting Mains with 1.1 KV grade FRLS
PVC insulated ISI marked stranded Copper conductor
wire in following type of pipe to be erected concealed Rupees Seventy
299 5000.00 in/ flushed on wall/ ceiling, with 1.5 sq. mm copper Mtr. 78.78 Eight And Paise
conductor FRLS PVC insulated stranded wire of green Seventy Eight Only
colour for earth continuity of following size
(a) with medium class Rigid PVC pipe and accessories
(b) 2 wire 2.5 sq. mm
Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following
type of pipe to be erected in/ on wall/ ceiling with 2.5 Rupees One
300 3500.00 sq. mm copper conductor FRLS PVC insulated Mtr. 107.06 Hundred Seven And
stranded wire of green colour for earth continuity of Paise Six Only
(a) 2 wire 4 sq. mm
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing & Erecting approved make following size of
TV Co-axial flexible cable comprising inner conductor
of solid bare copper insulated with Foam PE & Rupees Thirty Seven
301 100.00 Secondary conductor made of poly - Aluminium film Mtr. 37.37 And Paise Thirty
bonded Al. Braids @ suitable coverage overall Seven Only
sheathed with black PVC insulation.
Supplying & erecting approved make Telephone Cable
electrolytic copper conductor PE insulation twisted in
two pairs, & wrapped with FRLS PVC tape & sheathed
with FRLS PVC or HFFR outer Jacket suitable for
Rupees Nineteen
telephone wiring & confirming to C-DOT erected in
302 150.00 Mtr. 19.19 And Paise Nineteen
existing pipe. of following size of conductors & No.of
pairs. With necessary connections.
A. Conductor Size 0.5 mm
(a) (2) Unarmoured
Supplying & erecting approved make LAN cable of Rupees Forty Five
303 100.00 following size in existing pipe as per direction Mtr. 45.45 And Paise Forty Five
[C] CAT - 6 Only
Providing & erecting main Distribution (MDF) indoor Rupees Nine
type, back mounted frame as per DoT standard Hundred Forty Nine
approved with krone strips And Paise Forty
(a) Suitable for 10 pair Only
ARMOURED ALLUMINIUM CABLES.
Providing and erecting XLPE(IS:7098)(I)-88 ISI Rupees Five
armoured cable multistrand Aluminium conductor for Hundred Thirty
1.1 KV. to be laid on wall with necessary clamps or in Four And Paise
existing trench/ pipe of following size of cables Twenty Nine Only
(F) 3 1/ 2 core 120 Sq. mm (70 Sq. mm 1/ 2 core)
Providing and erecting XLPE (IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor for Rupees One
306 750.00 1.1 KV. to be laid on wall with necessary clamps or in Mtr. 151.50 Hundred Fifty One
existing trench/ pipe of following size of cables And Paise Fifty Only
d) 4 Core 16 Sq.mm.
Eight And Paise
Thirty Seven Only
ARMOURED COPPER CABLES.
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
308 10.00 KV. to be laid on wall with necessary clamps or in Mtr. 393.90
Three And Paise
existing trench/ pipe at road crossing or floor of
following size of cable.
b) 3 Core 6 Sq.mm.
Hundred Eighty Five
309 10.00 B) 3 Core 4 Sq.mm. Mtr. 285.83
And Paise Eighty
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand/ Solid Copper conductor Rupees Three
for 1.1 KV. to be laid on wall with necessary clamps or Hundred Sixty Two
in existing trench/ pipe at road crossing or floor of And Paise Fifty Nine
following size of cables. Only
(B) 4 core 4 Sq. mm
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Making trench in soft soil of suitable width of 90 cms Rupees Forty Six
311 500.00 deep for laying cable or locating the fault all over the Mtr. 46.46 And Paise Forty Six
run and back filling the same and making the surface Only
as a normal ground.
Drilling the road without breaking the road surface
(Asphalt) for laying of cable for feeding power supply
312 10.00 by making upto 150mm dia. size of holes at both ends Mtr. 411.07
And Paise Seven
(A) Up to 100 mm bore dia
Providing and erecting iron clad cable route marker Rupees Two
duly marked with ELE. CABLE of size 23 cms.X 12 cms. Hundred Forty And
Flushed with ground in cement foundation as directed Paise Thirty Eight
by Engineer incharge. Only
Providing & laying approved make Double walled
corrugated pipes (DWC) of polyethylene (conforming
to IS 14930 II)with necessary connecting accessories Rupees Sixty Two
314 250.00 of same material at required depth in existing trench Mtr. 62.62 And Paise Sixty Two
for laying of cable. below ground/ road surface for Only
enclosing cable
(A)50 mm outer dia
Providing & laying approved make Double walled
corrugated pipes (DWC) of polyethylene (conforming
to IS 14930 II) with necessary connecting accessories
315 200.00 of same material at required depth in existing trench Mtr. 137.36
Seven And Paise
for laying of cable. below ground/ road surface for
Thirty Six Only
enclosing cable
(D)120 mm outer dia.
Providing and, fixing heavy duty flange type brass
Rupees Thirty Eight
cable gland with rubber ring for PVC insulated
316 2.00 No 38.38 And Paise Thirty
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(C) 2 to 4 core 10 Sq. mm
Rupees Forty Seven
317 16.00 d) 2 to 4 Core 16 Sq.mm No 47.47 And Paise Forty
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
Hundred Forty And
318 4.00 armoured cable complete with out going tails, No 140.39
Paise Thirty Nine
insulating tape etc for following size of cables.
(E) 3 & 1/ 2 core 120 Sq. mm
Solder less crimping type Aluminium lugs conforming
to IS suitable for cable of following size evenly Rupees Thirteen
319 8.00 crimped with high pressure tool & connected to No 13.13 And Paise Thirteen
switchgear terminals with brass/ cadmium plated nut Only
bolts in an approved manner.
Rupees Fifteen And
Paise Fifteen Only
Rupees Forty Five
321 16.00 (G) 120 Sq.mm. No 45.45 And Paise Forty Five
Providing and fixing printed instruction chart both in Rupees One
English and Gujarati and duly framed with front Hundred Thirty And
glasses, for treatment of person suffering from Electric Paise Twenty Nine
shock with minimum 50" diagonally size. Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supplying & erecting carbon dioxide (CO2) fire Rupees Six
extinguisher user of following capacity with necessary Thousand Five
323 5.00 clamps made from 50 x 6 mm M.S. Flat with nut & Ea 6,591.26 Hundred Ninety One
bolts grouted in wall complete. And Paise Twenty
[A] For 4.5 Kg. Capacity Six Only
MINIATURE CIRCUIT BREAKERS.
providing and erecting Miniature circuit breaker
single pole 6A to 25A suitable to operate on 240 V A.C.
324 243.00 system and having breaking capacity 10 KA to be No 112.11
And Paise Eleven
erected in existing box. confirming to IS 8828/
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking
Hundred Seventy
325 42.00 capacity & confirms to IS : 8828 in existing box having No 278.76
Eight And Paise
following capacity
Seventy Six Only
(A) 6 to 32 Amp. Cat-III
Providing & erecting 415 V MCB Four Pole for Motor &
Inductive Load (C Curve) having 10KA breaking
326 16.00 capacity & confirms to IS :8828 in existing box having No 737.30
Seven And Paise
following capacity
(c)63 Amp. Cat.III
Providing & erecting 415V MCB Four Pole Switch for
Rupees Six Hundred
Lighting Load (B curve) having 10KA breaking
Thirty Eight And
327 3.00 capacity & confirms to IS :8828 in existing box having No 638.32
Paise Thirty Two
following capacity
(b)40 Amp. Cat.III
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush/ surface mounted fitted
with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without
MCB to house appropriate No. of MCBs.(The DBs
328 1.00 No 1,911.93 Hundred Eleven
should be used of same company of MCB to be used)
And Paise Ninety
(B) three phase incoming and single phase horizontal
type outgoing Per phase isolation type (PPI)
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush/ surface mounted fitted
with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without
MCB to house appropriate No. of MCBs.(The DBs
329 4.00 No 2,445.21 Hundred Forty Five
should be used of same company of MCB to be used)
And Paise Twenty
(B) three phase incoming and single phase horizontal
type outgoing Per phase isolation type (PPI)
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush/ surface mounted fitted
with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without Rupees Five
MCB to house appropriate No. of MCBs.(The DBs Hundred Eighty Two
should be used of same company of MCB to be used) And Paise Seventy
suitable for Seven Only
(A) single phase incoming and horizontal single phase
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
EARTH LEAKAGE CIRCUIT BREAKERS.
providing and erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA and Rupees Two
suitable for operation on single phase 240 V,50Hz. Thousand Two
331 15.00 having characteristic of quick action & tripping with all No 2,235.13 Hundred Thirty Five
advance feature & do not incorporate any electronic And Paise Thirteen
component. for following Max. rating erected as Only
(ii) 40Amps. DP
332 1.00 (iii) 63 Amps. DP Cat-III No 2,654.28 Hundred Fifty Four
And Paise Twenty
333 1.00 (i) 25 Amps.DP Cat-III No 1,969.50
Hundred Sixty Nine
And Paise Fifty Only
Providing and erecting metallic vitrified danger notice
Rupees Sixty Nine
board as per language suggested by engineer incharge
334 1.00 No 69.69 And Paise Sixty Nine
for MEDIUM VOLTAGE installation to be erected as per
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking capacity
ICU of 35 KA. at 415 V. having Normal current rating
200A.with variable Thermal & magnetic release
335 1.00 EA 16,221.61 Hundred Twenty
suitable to work on A.C.supply 50 c/ s. with all internal
One And Paise Sixty
connections, spreader tinned copper & complete
erected in existing 16 G.M.S.housing
ICS=100% of ICU only Cat III
Pproviding and erecting Approved make Four pole
moulded case circuit breaker having breaking capacity
ICU of 25 KA. at 415 V, having normal current rating
up to 25 A to 100A. with Fixed thermal & magnetic
336 2.00 No 6,173.12 Hundred Seventy
release suitable to work on A.C. supply 50 c/ s. with all
Three And Paise
internal connections, spreader tinned copper &
complete erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
Supplying and erecting triple pole & neutral 440V/
500V panel mounting Copper Busbars with four equal
No. of electrolyte bus having current density not more
than 1.6 Amp./ sq.mm (Rated current/ cross section
area) duly wrapped with colour insulating tape for
337 5.00 Rmt 3,202.71 Hundred Two And
phase sequence of following current carrying capacity,
Paise Seventy One
erected with necessary bus bar supports/ insulators,
main cable socket to each bar, erected in existing
cubical panel with necessary connections.
(B) Suitable for 200 Amp. capacity
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board having IP-64 protection made
from 14 SWG thick CRC M.S. sheet for outer body &
doors, 16 SWG thick CRC M.S.sheet for internal
partitions with necessary supporting angles, flats
including cutting, bending, drilling, welding, riveting
with internal partitions & cable alley as per
requirements & instruction of engineer-in-charge with
erection of supplied switch gears, BUSBARS, with
suitable size of inter connecting PVC copper wire/
Rupees Fourteen
copper-aluminium strips, rubber grommets, rib,
338 5.00 bakelite control fuses for measuring instruments, Smt 14,902.55
Hundred Two And
earth bus & earth bolts, foundation flange - bolts-base
Paise Fifty Five Only
Plates, sufficient No. of hinged doors, handles with
locking arrangement and rubber gasket complete. The
Panel shall be painted with epoxy powder coating.
(The rates excludes the cost of switchgears, bus bars,
inter connecting mains & Copper Aluminium strips,
meters, Fuses etc. The dimension shall be measured
excluding base beams) The panel shall be supplied
with following approved manufacturers with following
(B) The standard companies switch gear shall be used
and only manufacturers at CPRI approved factory
(i) with 350mm depth
Supplying and erecting approved make suitable panel Rupees Forty Three
339 12.00 indicator LED type lamp, lens cover, complete erected No 43.43 And Paise Forty
with necessary connections. Three Only
providng and erecting Approved make energy meter
phase 4 wire unbalanced load rating, 10A to 60 Amp.
based on ASIC(Application specific Integral Circuits) Rupees Two
digital technology with accuracy Class - 1, temper Thousand Six
340 2.00 proof, free from effect of external magnetic field with 3 Each 2,696.70 Hundred Ninety Six
phase indication, earth & impulse indication, 6 digit And Paise Seventy
electro mechanical impulse counter, suitable work on Only
120 V to 300V per phase 45-55 HZ, housed in robust
enclosure with erection as directed. Cat. III
providng and erecting Suitable set of CTS for 100A
341 6.00 Each 2,105.85 Hundred Five And
Paise Eighty Five
Supplying and erecting approved make panel Rupees One
mounting type Digital Voltmeter having 3 digits LED Thousand Two
342 2.00 display, 0 to 750 AC Volts range erected on existing EA 1,275.63 Hundred Seventy
panel board with all connection, wiring etc.with Five And Paise Sixty
manufacturers calibration certificate. Three Only
Supplying and erecting approved make panel
mounting type Digital Ammeter having 3 digits LED
display, external CT operated, calibrated for 0 to
343 2.00 EA 1,558.43 Hundred Fifty Eight
Amps suitable to operate on 500 Volt AC, erected on
And Paise Forty
existing panel board with all connection, wiring
etc.with manufacturers calibration certificate.
Supplying and erecting Ammeter/ Voltmeter selector
Hundred Seventeen
344 2.00 switch for 3 phase AC Supply 500 V on existing panel EA 317.14
And Paise Fourteen
board with necessary connections.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Mains with ISI marked, 1.5KV grade electrolyte multi
stranded, annealed copper conductor with heat
resistant PVC insulated conforms to IS 694, IEC -
Rupees Thirty Five
erected in existing pipe of following size (Specifically
345 50.00 Mtr. 35.35 And Paise Thirty
for control panel, relays, power switchgears, motor
starters & control wiring) with required size of copper
lugs, nuts and bolts if required.
(d) One wire 4.00 sq. mm
Rupees Fifty Three
346 50.00 (e) One wire 6.00 sq. mm Mtr. 53.53 And Paise Fifty
Rupees Eighty Seven
347 40.00 (f) One wire 10.00 sq. mm Mtr. 87.87 And Paise Eighty
Hundred Thirty Five
348 40.00 (g) One wire 16.00 sq. mm Mtr. 135.34
And Paise Thirty
Providing, erecting, fabricating the M.S. structure as
per requirement on site incorporating proper size of
M.S. angles, flats, bars, channels, sections complete
with cutting, welding, grinding & finishing duly
349 100.00 Kg. 77.77 Seven And Paise
painted with one coat of red oxide with erection on
Seventy Seven Only
site as per direction of engineer in charge with
necessary grouting, cementing, plastering & finishing
Fabricating the box type items made from M.S. Sheet
with A.I. supports, wings, doors, handles other Rupees One
hardware materials as per requirement design with Hundred Eighty And
finishing by three tank powder coating processed Paise Seventy Nine
inside and outside painted, erected as directed Only
including minor civil work.
Painting by cleaning, the surface and applying one coat
Hundred Forty Six
351 10.00 of primer and two coats of enamel paint for meter cup- Smt 146.45
And Paise Forty Five
board or base plate suitable to match the wall finish
Painting the number and words for inventory
Identification on erected fittings/ equipment’s or Such Rupees Twenty Two
352 50.00 accessories as may required with good quality of EA 22.22 And Paise Twenty
enamelled paint as directed by engineer in charge. Two Only
(i) up to 20 characters, up to 50 mm height.
353 20.00 (ii) Add. for additional character. EA 2.02
354 10.00 (iii) Add for additional each 25mm. height EA 6.06
CEILING FANS AND ACCESSORIS.
Providing & erecting Approved make Power Saving 50 Rupees One
Watt Ceiling Fan with double ball bearing ISI mark Thousand Nine
355 153.00 with Condenser 230 volt A.C. 50 Hz 1200 mm sweep No 1,948.29 Hundred Forty Eight
complete having 3blades with aluminium blades with, And Paise Twenty
canopy & 30 cm. down rod erected with earthing. Nine Only
(Make shall be approved by Engineer in charge))
FAN ACCESSORIES.
Supplying and erecting 19/ 20 mm. nominal bore Rupees One
356 20.00 Medium Class M.S. Pipe down rod erected duly painted Mtr. 108.07 Hundred Eight And
for fan complete with necessary 24/ O.2, 3 core Paise Seven Only
flexible wire with earthing.
Supplying & erecting Fan Hook of 10 mm M.S. Rupees Forty Three
357 20.00 Roundbar grouted in RCC slab with Making the site as No 43.43 And Paise Forty
original. Three Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supplying & erecting fan hook box of 10 mm M.S.
round bar bounded to the RCC bars up to 50mm length Rupees One
358 20.00 each side and pierced through a 16 Gauge M.S. box/ No 108.07 Hundred Eight And
Heavy Duty PVC box complete erected concealed in Paise Seven Only
Ceiling with necessary finishing..
Providing Fan clamp of 30 x 5 mm flat of required Rupees Ninety Eight
359 20.00 length & 10 mm M.S. Bolt & Nuts erected with No 98.98 And Paise Ninety
necessary hook of 10 mm M.S. Round Bar. Eight Only
Rupees Eighteen
Providing 2.5mm.thick laminated acrylic sheet to
360 20.00 No 18.18 And Paise Eighteen
cover the fan hook or Fan box.
TABLE FANS, EXHAUST FANS & ACCESSORIES. Rupees One
Supplying & erecting approved make low noise Thousand Seven
361 34.00 decorative exhaust fan having size 200mm with 1350 No 1,703.87 Hundred Three And
RPM with square frame ABS body with inbuilt lowers Paise Eighty Seven
& square frame. Only
Supplying & erecting single phase approved make
industrial exhaust fan suitable for medium duty ring Rupees Two
mounted low noise operation suitable for medium Thousand Fifty Four
duty having following dia size and maximum speed in And Paise Thirty
[A] 305 mm dia 900 RPM Cat II
Supplying and erecting LED indoor fittings with LEDs
of wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be made
of thick sheet Steel conforming to IS: 513/ CRCA
polyester powder coated and high U.V. & corrosion
resistance with diffuser and/ or Polycarbonate optics
with company mark/ name
120 to 300 V,Power Factor more than 0.9, THD < 10 Rupees Three
%, Hundred Seventy
CCT 4000 K to 6500K, Uniformity ratio >0.7, Three And Paise
Luminaire efficiency> 85 lumens/ watt, Seventy Only
LED driver efficiency > 85 %
CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/
Bridgelux(U.S.A.) make LED used for luminaire. (Each
fitting required LM-79 & LM-80 Certificates)
(A) Tube Light with integral/ non-integral driver
(d) 22-24 Watts, Surge - 2KV,IP-20, 4 feet
Supplying and erecting LED indoor fittings with LEDs
of wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be made
of thick sheet Steel conforming to IS: 513/ CRCA
polyester powder coated and high U.V. & corrosion
resistance with diffuser and/ or Polycarbonate optics
with company mark/ name
120 to 300 V,Power Factor more than 0.9, THD < 10 Rupees Four
%, Hundred Twenty
CCT 4000 K to 6500K, Uniformity ratio >0.7, Seven And Paise
Luminaire efficiency> 85 lumens/ watt, Twenty Three Only
LED driver efficiency > 85 %
CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/
Bridgelux(U.S.A.) make LED used for luminaire. (Each
fitting required LM-79 & LM-80 Certificates)Square/
Circular Surface/ Recessed Mounted Downlight/
Hanging with provision for spring loaded mounting
clips complete.(b) 11-15 watts, Surge-4 KV Cat III
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supplying and erecting LED indoor fittings with LEDs
of wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be made
of thick sheet Steel conforming to IS: 513/ CRCA
polyester powder coated and high U.V. & corrosion
resistance with diffuser and/ or Polycarbonate optics
with company mark/ name
120 to 300 V,Power Factor more than 0.9, THD <
365 10.00 No 312.09 Hundred Twelve
CCT 4000 K to 6500K, Uniformity ratio >0.7,
And Paise Nine Only
Luminaire efficiency> 85 lumens/ watt,
LED driver efficiency > 85 %
CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/
Bridgelux(U.S.A.) make LED used for luminaire. (Each
fitting required LM-79 & LM-80 Certificates)
(H) Mirror Light 9 Watts, wall mounted minimum
Providing and erecting HOT deep Galvanised iron strip
366 50.00 Kg. 77.77 Seven And Paise
wire 8 to 16 S.W.G.
Seventy Seven Only
Providing and erecting Pipe type earthing with 40 mm
dia 2.5 Mtr. long 'B' grade G.I. pipe with necessary
367 11.00 coupling buch buried in specially prepared earth pit & EA 823.15
Three And Paise
G.I. earth wire of 8 SWG erected & connected as
directed (For panel)
For using salt and charcoal/ coke as required for pipe Hundred Seventy
type earthing. One And Paise
Supplying & erecting funnel type earthing having earth
plate of following size buried in specifically prepared
earth pit 3 Mtr. below ground with 40 Kg. charcoal and
salt with alternate layers of charcoal & salt, 20mm.dia.
G.I. pipe with Funnel with a wire mesh for watering &
bricks masonry block, C.I. Cover complete as per para
7.3 of IS 3043 with necessary length of double
369 2.00 No 7,874.97 Hundred Seventy
Galvanised Iron/ copper earth wire No 6 SWG bolted
with lug to the plate and covered in 12 mm dia. G.I.
Ninety Seven Only
pipe 2.5 Mtr. long complete connected to the nearest
switch gear with end socket as per direction & duly
tested by earth tester confirming to ISS (As per
drawing)with following specification.
(C) with 60 x 60x 0.315 cms. Copper earth Plate
Providing and erecting required size HOT deep Rupees Seventy
370 150.00 Galvanised iron strip for earthing of H.T., OCB/ ACB/ Kg. 77.77 Seven And Paise
Transformer LT panel board, Motors etc. using proper Seventy Seven Only
Providing and erecting Annealed bare Copper wire 8 Hundred Ninety
to 16 SWG. Four And Paise
Eighty Seven Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Providing & erecting water cooler having storage
capacity 150 Ltr. & cooling capacity 150 Ltr.per hour
@ an ambient temp of 45˚ C. The outlet temp. of the
Rupees Forty Six
water should drop by 15˚C within a hour, The water
cooler should be comprising of hermetically sealed
372 5.00 EA 46,648.87 Hundred Forty Eight
compressor, fan motor, condensing unit, water tank
And Paise Eighty
surrounded by evaporating, coil, thermostats, relay
etc.complete with necessary inlet & outlet connection.
The body of water cooler will be made from Stainless
Supplying and erecting water filter cum purifier with Thousand Five
373 5.00 ultra violate technology. (Aquaguard/ waterdoc model EA 4,528.84 Hundred Twenty
or equivalent symphony/ crystal/ videocon model) Eight And Paise
Eighty Four Only
Supplying and erecting horizontal/ vertical mounting
type storage water heater with copper container Rupees Five
housed in M.S./ S.S./ ABS body insulated with glass Thousand Nine
374 23.00 wool/ puff complete with heating elements,adjustable EA 5,906.48 Hundred Six And
thermostats 300C to 850C, indicating lamp, safety Paise Forty Eight
valve, fusible plug, etc.complete erected with coach Only
bolts, nuts. washers & cementation
(A) 10 Ltr. with 3 KW. heating element
Providing and fixing approved make Conical Poles
(Standard) Made from CR sheet steel. The pole should
be made as per IS. and shall be coated with hot dip
galvanizing as per IS 2629/ 4759. with required base
375 15.00 EA 8,756.70 Hundred Fifty Six
plate as erected on existing foundation. The length of
And Paise Seventy
poles are as below.
(D) 6 Mtr. Long 65mm Top X155 mm bottom dia, 3mm
Providing M-20/ 1:2:4 cement concrete foundation &
70 % PCC from bottom including excavation for the
pole of size 45 x 45 x 100 cms. Deep in below ground Rupees Eight
376 15.00 level with plinth of 45 cms x 45 cms (or 45 cms dia x EA 809.01 Hundred Nine And
45 cms) high upper ground level with necessary Paise One Only
curing and finishing in approved manner.
(for 4 & 6 Mtr. pole)
STREET LIGHT BRACKETS.
Providing street light pole bracket consisting of Light
Class MS.pipe of 4.2 cms. outside dia. complete with
suitable M.S. sleeve tubing of approximate 45 cms. and
length suitable for 76.5 mm/ 80mm./ require size pole Rupees Five
top having sufficient fastners for fixing the brackets Hundred Sixty One
and having spread of 1 Mtr. length with suitable rise as And Paise Fifty Six
per site condition & suitable welded stiffener reducer Only
and nipple with check nut complete painted with one
coat of Red oxide/ PU base primer and two coats of
Aluminium/ PU paint. paint with following No of arms.
[A] Single Arm bracket 1 Mtr.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supplying and erecting LED street light/ Flood light
fittings with High power White LEDs wattage of 1Watt
and above assembled on single MCPCB, efficiency
more than 130 lm/ w and corrosion free High
pressure die cast aluminum housing with smooth
finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/
lenses with company mark/ name engraved or
embossed 120 to 300 V,Power Factor more than 0.95,
THD < 10 %, CCT 3000 K to 5700K, Rupees Eight
Uniformity ratio >0.45, Luminaire efficacy> 100 Thousand Four
378 4.00 lumens/ watt. LED driver efficiency > 85 %.CREE/ EA 8,453.70 Hundred Fifty Three
OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/ And Paise Seventy
BridgeLux (U.S.A.) make LED used for luminaire. Only
(fittings required LM-79 & LM-80 certificates)(NOTE:
Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges
(B) Flood Light (IP-65), Surge -4KV,Light must have
440VAC line supply protection. It should withstand
hours for 440VAC line supply (v) above 120 to
Supplying and erecting LED street light/ Flood light
fittings with High power White LEDs wattage of 1Watt
and above assembled on single MCPCB, efficiency
more than 130 lm/ w and corrosion free High
pressure die cast aluminum housing with smooth
finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/
lenses with company mark/ name engraved or
embossed 120 to 300 V,Power Factor more than 0.95,
THD < 10 %, CCT 3000 K to 5700K, Rupees Three
Uniformity ratio >0.45, Luminaire efficacy> 100 Thousand Three
379 15.00 lumens/ watt. LED driver efficiency > 85 %.CREE/ EA 3,345.12 Hundred Forty Five
OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/ And Paise Twelve
BridgeLux (U.S.A.) make LED used for luminaire. Only
(fittings required LM-79 & LM-80 certificates)(NOTE:
Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges
(A) Street Light (IP-65), Surge protection -4KV integral
and,Light must have 440VAC line supply with over-
voltage protection.
(i) above 36 to 48 watts CAT III
Providing & erecting open well horizontal mono block
pump set with cast iron body, complete for three Rupees Eighteen
phase submersible motor having Thousand Seven
380 1.00 [D] For 5 HP 3 phase open well horizontal mono block EA 18,746.61 Hundred Forty Six
pump set suitable for 1350 LPM to 310 LPM @ 10 to And Paise Sixty One
42 Mtr. head suitable for 50/ 65 mm dia delivery pipe Only
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supplying and erecting Direct On-line Electronics
Starter with 2-5/ 4-10/ 8-14/ 10-16 Amp. Rating relay
(variable current setting) directly operated in totally
insulated elegant enclosure and 18 Amp. Rating power
relay with start - stop button for single phase
operation up to 3 HP as per complete erected on P.W.
381 1.00 EA 1,603.88 Hundred Three And
Block with following features.
Paise Eighty Eight
Low voltage cut off below 140 V
High voltage cut off above 280 V
Overload protection
Indicating LEDs for motor on lv, hv & overload
tripping. [Cat.II]
Supply of Fibreglass Platform Step (A Type) Ladder -
18 FT having following specifications : Rupees Thirty Three
It should have large fully serrated platform 15” wide Thousand Eight
382 1.00 20” deep which locks ladder, Aluminium feet with EA 33,895.60 Hundred Ninety
thick rubber tread, top rail guard to serve as a railing, Five And Paise Sixty
two pairs of gusset support at the bottom step and All Only
gussets are heavy duty steel. Capacity : 300 lbs.
Supplying of single phase submersible pump set
suitable for 100 mm size or more dia bore well having Rupees Seventeen
motor capacity and discharge as under with necessary Thousand Six
383 1.00 panel box EA 17,607.33 Hundred Seven And
(b) Motor rating 1.5 HP (16 stage) pump having Paise Thirty Three
capacity of 50 LPM at 60 Mtr. head suitable for 32 mm Only
dia. delivery pipe Cat II
Supplying and erecting Direct - On - Line Starter with
18 A. rating contactor and with 3.5 Amp. 18A range Rupees Two
directly operated in totally insulated elegant enclosure Thousand One
for single phase operation up to 3 HP as per IS 13947 Hundred And Paise
complete erected on P.W. Block with necessary Eighty Only
connection. Cat III
Providing & erecting approved make ATS panel
suitable for following size of 3 phase, 415 V., 50 cycles,
A.C. diesel generating set complete of scope as detailed
below: Rupees Fifty Seven
1) Power module: Motorised Changeover switch with Thousand Three
385 1.00 ATS controller, Auxiliary contactor with NO & NC Each 57,347.80 Hundred Forty
contacts with Automatic Battery Charger, indicating Seven And Paise
lamps for Generator ON, Mains ON, Load and suitable Eighty Only
control terminals and power terminals with neutral
earthing studs.
(C) ATS Panel for 50/ 62.5 KVA 3 phase DG Set
Supply, Installation, Testing and Comissioning of 4MP
Fixed Lens Dome Type Camera,
H.265 4MP IR Vandal Proof Dome N/ W Camera,
2.8mm/ 3.6mm, 30M IR, Micro SD, DC12V/ PoE, IP67/
IK10, Basic IVA, 1/ 2.7" CMOS, 2560 × 1440, 0.01 Lux,
386 15.00 EA 9,965.67 Hundred Sixty Five
F1.2, AGC ON; Defog, True day/ night, Digital WDR, 3D
And Paise Sixty
DNR, HLC & BLC, Triple streams, Smart codec by ROI,
Cyber Security, Basic intelligent video analytics, NDAA
Compliance, UL, CE, FCC Certified (Including Five year
free maintenance with guarantee)
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supply, Installation, Testing and Comissioning of 4MP
Fixed Lens Bullet Type Camera,
H.265 4MP IR Bullet N/ W Camera, 3.6mm/ 6mm,
50M, Micro SD, DC12V/ PoE, IP67/ IK10, Basic IVA,
4MP resolution (2560 × 1440), True day/ night,
387 6.00 EA 9,965.67 Hundred Sixty Five
Digital WDR, 3D DNR, HLC & BLC, Triple streams,
And Paise Sixty
Smart codec by ROI, Cyber Security Basic intelligent
video analytics, NDAA Compliance, UL, CE, FCC
Certified (Including Five year free maintenance with
Supply, Installation, Testing and Comissioning of
Channel Network Video Recorder (NVR), Support
Rupees Sixty Eight
8CH@2MP, H.264 Video Compression, HDMI, VGA
output, up to 4 SATA interface each with max 6 TB
388 1.00 EA 68,794.13 Hundred Ninety
support, bandwidth 200 mbps, CE FCC, BIS, Operating
Temp -10 deg to 50 deg C, USB and serial
Interface (Including Five year free maintenance with
Supply Installation Testing and commissioning of
389 3.00 PORT POE SWITCH with required all necessary No 8,585.00
Hundred Eighty Five
accessories to complete the job.
Supply, installation, testing and commissioning of 9 U Thousand Eight
390 1.00 Rack including necessary power mounting and fan No 8,875.88 Hundred Seventy
arrangements for mounting CCTV equipments Five And Paise
Eighty Eight Only
SITC of 32 Inch 500 NTS Brightness professional
Display with Direct-Type LED, Viewing Angle :
Degree Verti, 178 Degree Hor. Operation 27x7, Native
Resolution 3840 x 2160 (16:9) - UHD, 4 x USB (2 x 2.0, Rupees Twenty Five
391 1.00 1 x 2.0 internal, 1 x Type C), 0-40°C, ≤0.5 W, HTML 5 EA 25,250.00 Thousand Two
Browser Opera(4.9), Yes(internal) IEEE 802.11 a/ b/ Hundred Fifty Only
g/ n Dual WiFi certificated, BIS, YES CLASS A 3dB
margin. (Including Five year free maintenance with
Supply Installation Testing and commissioning of
392 1.00 No 40,400.00 Thousand Four
kva 3 phase Servo stabilizer for Light operation.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supplying and erecting, commissioning and testing of
Diesel Generating set confirming to IS: 4722:1968 &
BS:5514 having continuous rating, 3 phase, 415 volts,
50 cycles A.C. supply comprising of a totally enclosed
air/ water cooled diesel engine with multi-cylinders
developing suitable BHP not less than following
capacity at 1500 RPM with 10% overload for one hour
in 24 hours with standard accessories like fly wheel,
lubricating oil cooler, "A" class governor, heavy duty
fuel wheel and lubricating oil filter, oil bath air filler,
lubricating oil pressure gauge, end exhaust manifold,
standard set of tools with adjustable spanners, screw
drivers, cylinder head to cover, joint cylinder head to
exhaust, element lube oil filter, 12/ 24 volts electric
starting equipment complete with standard heavy
duty battery, dynamo, cut-outs, ammeter, necessary
wiring, pressure gauge, starter etc and heavy duty
Residential type exhaust silencer and vertical hot air
duct both logged with asbestos rope, save oil trays,
exhaust piping of required length, standard wall/ floor
mounted fuel with level indicator and piping and drip
proof alternator, self excited, self regulated, screen
protected, with excitation system, capable of
delivering the rated system output at 415 volts,
phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, Rupees Five Lakh(s)
conforming to IS-4722- 1968 with voltage regulation Forty One Thousand
+/ - 5% of rated voltage from no load to full load. Two Hundred
Ninety Three And
Both the engine and alternator fitted on a common Paise Thirty Four
fabricated steel base plate with antivibration Only
mounting engine and alternator both connected to
each other by flexible flange coupling and with floor/
wall mounted control panel box comprising of
voltmeter ammeter, selector switches, ACB/ MCCB/
MCB of adequate capacity, indicator lamps duly wired
with HRC fuses. The alternator & control panel shall be
connected with provided suitable capacity armoured
cable and complete with Acoustic enclosure (canopy)
made out of 16 SWG CRCA Sheet, sound absorbing
material Rockwool of 64 density & 100 mm thick
conforming to IS:8183/ PU Foam of 40 Density - at
least 40 mm. The resin bonded rockwool covered from
inside the canopy by perforated sheet with 3/ 4 mm
holes, sound level not more than 75 dB at a distance of
1 Mtr., as per PVCT norms. Erection, commissioning
and satisfactory testing as per requirement with first
filling of fuel, oil, etc. with guarantee/ Warrantee of
complete system for Two years. & with obtaining all
necessary certificate from Electrical Inspector. The
Capacity and Ratings of DG sets are as below.
(I) Continuous Rating of 62.5 KVA,BHP not less than
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supplying, Erecting, Testing & Commissioning the
passenger/ stretcher Machine room less lift having
following main features :[1] GEAR LESS LIFT DRIVE
comprising of High Starting torque Lift 3 phase 440 V
A. C. Permanent Magnet Synchronous motor of proper
rating with high efficiency shall be used.
[2] Micro processor based/ PLC, ACVVVF, vector
control drive with encoder feedback closed loop
system shall be used for lift car and door operation
which shall be full collective selective operation hall
call demand response, UP/ DOWN hall stops, Main,
Up/ Down Contactor with overload and phase reversal
relay and safety controls.[3] Car with M S platform
with bracings of adequate size and to sustain the
impact load cabin + passenger with safety factor of fire
for steel and side panels of Stainless steel of sheet of
grade 304 duty. Car ceiling will be S.S. finishes with
aesthetic appearance with LED ceiling lights. Car
flooring shall be of anti skid PVC with choice of colour
of engineer in charge. Car doors shall be of stainless
steel grade 304, hairline finish with centre opening/
telescopic automatic doors. Car panel will also be S.S.
304 finished with emergency stop device, mechanical
door safety device, facility of auto/ attended mode. All
car panel buttons and all floor switches must be with
brail language as per lift act.
[4] All landing doors must be fire rated for 2 hour shall
be fully automatic centre opening/ telescopic opening
made of hairline finish steel grade of 304 with key
holes and infrared curtains with Unlocking facility
[5] Appropriate battery operated emergency light in
the car along with alarm switch shall be provided.
Also, Emergency Light & Fan should start immediately
without any Time Delay as soon as power fails.
[6] Digital scrolling indicator system for up-down
arrow along with floor position indicator shall be
provided inside the car and at all floors.
[7] Full height infra red curtain with multiple cross/
crossing light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be provided
accordingly of passenger capacity with Manual Rescue
Operation (Manual Cranking Facility).
[9] Audio visual indication in the lift car showing over
loading shall be provided such that doors kept open
till excess load is removed.
Rupees Seventeen
SCHEDULE- B No Seven Thousand Page
Seventeen And Paise
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
Supplying, Erecting, Testing & Commissioning the
passenger/ stretcher Machine room less lift having
following main features :[1] GEAR LESS LIFT DRIVE
comprising of High Starting torque Lift 3 phase 440 V
A. C. Permanent Magnet Synchronous motor of proper
rating with high efficiency shall be used.
[2] Micro processor based/ PLC, ACVVVF, vector
control drive with encoder feedback closed loop
system shall be used for lift car and door operation
which shall be full collective selective operation hall
call demand response, UP/ DOWN hall stops, Main,
Up/ Down Contactor with overload and phase reversal
relay and safety controls.[3] Car with M S platform
with bracings of adequate size and to sustain the
impact load cabin + passenger with safety factor of fire
for steel and side panels of Stainless steel of sheet of Rupees Seventeen
grade 304 duty. Car ceiling will be S.S. finishes with Lakh(s) Twenty
aesthetic appearance with LED ceiling lights. Car Seven Thousand
flooring shall be of anti skid PVC with choice of colour One Hundred
of engineer in charge. Car doors shall be of stainless Seventeen And Paise
steel grade 304, hairline finish with centre opening/ Seventeen Only
telescopic automatic doors. Car panel will also be S.S.
304 finished with emergency stop device, mechanical
door safety device, facility of auto/ attended mode. All
car panel buttons and all floor switches must be with
brail language as per lift act.
[4] All landing doors must be fire rated for 2 hour shall
be fully automatic centre opening/ telescopic opening
made of hairline finish steel grade of 304 with key
holes and infrared curtains with Unlocking facility
[5] Appropriate battery operated emergency light in
the car along with alarm switch shall be provided.
Also, Emergency Light & Fan should start immediately
without any Time Delay as soon as power fails.
[6] Digital scrolling indicator system for up-down
arrow along with floor position indicator shall be
provided inside the car and at all floors.
[7] Full height infra red curtain with multiple cross/
crossing light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be provided
accordingly of passenger capacity with Manual Rescue
Operation (Manual Cranking Facility).
[9] Audio visual indication in the lift car showing over
loading shall be provided such that doors kept open
till excess load is removed.
[10] Spring buffers/ PU Buffers shall be provided.
[11] Car fan as per passenger capacity with automatic sleep
timer shall be provided.
[12] Voice annunciator with suitable music shall be
provided in lift car.
[13] Self diagNotics system for operational and safety
parameters shall be provided in control panel.
[14] Mechanical over speed governor with governor
calibration as per actual site parameters and submission of
calibration certificate submission, door key holes in the
floor doors, fireman switch shall be provided.
[15] Lift machine hoisting arrangement in the lift machine
room and monkey ladder for lift pit should be provided by
the lift agency, along with the other steel structure works,
foundations for the machine etc.
[16] In the hoist way fascia plate shall be provided without
any extra cost, where ever required as/ if directed by
engineer in charge.
SCHEDULE- B Page
Rate with L.Cess 1%
Total Qty Item Descriptionan Unit Rate in
No Rate in Word Amount
[17] Permanent wiring with necessary safety devices like RCCB in all
circuit, Over Voltage Under Voltage protection and THD eliminator in
circuit for lift machine room and lift well with proper numbers of light
points, with fixtures, exhaust fan and plug points shall be provided by the
agency. Only 3 phase Power Supply shall be made available by department
in lift machine room. Necessary Earthing as per Lift Act/ Rules shall be
arranged by Lift Agency.
[18] Any civil/ electrical works for additional and alteration in lift shaft
and machine room related to erection of lift shall be made by lift agency
without any extra cost. (granite/ marble fixing around all landing door
openings are not in lift agency’s scope.)
[19] Agency has to provide all working drawings and documents and
liaison services for obtaining all necessary permission from lift inspector
and other authorities. [20] acrylic transparent licence/ display A4 size
holder in lift car
[21] Car Panel Operating Buttons with floor position indicator/ buttons
must be of Auto Glow type clearly visible when view from inside cabin.
[22] For Physically Handicapped person Full Length Handrails of hairline
finish steel grade of 304 should be provided at appropriate height on the
Rear & Side Wall Panels in Lift Car.8/ 10 Passengers, Ground plus 3 upper
floor with Rated Speed of 1.0 m/ sec., (B) With General Specification
attached herewith. Cat.III
In Words: Rupees Ten Crore Ten Lakh(s) Seventy Thousand Six Hundred Seventy Three And Paise Thirty Five Only
(A) Total tender amount Rs.
(B) Rebate on above tender amount (if any) (% in figure)________(% in Words)___________________________________________ Rs.
(C) Net tendered amount (A-B) Rs.
(D) Net Tendered amount (In words) : Rupees
1 All works shall be carried out as per Public Work Department and other specification of division or as directed.
All the columns in the contractor be filled in ink and the total of the entries in the last column should be struck by the contractor
under his signature.
Rates quoted include clearance of site (prior commncement of work and its close). In all respect and held good for work under all
condition, site, moisture, weather etc.
Testing of materials shall be as per statement attached with the specifications. The material shall be tested in GERI testing charges
4 @ 1% of the amount as per the schedule -B shall be recovered from the contractor from the running bill as per G.R. (E&R) deptt. No.
TKC/1085/4-S dt. 20-12-91. Test results other than GERI will not be accepted.
1% of the construction cost of shall be deducted from bill amount of contract, as per hthe building and other construction worker's
5 welfare cess act. 1996. (Labour & Employment department letter No. C.W.A. - 2004 - 1831- M(3), Dt. 09/12/2005, Notification of
labour & Employment Department. Dt. 03-01-05- and Labour & Employment Department. letter No.C.W.A. - 2004 - 1831- M(3),
Quantity, rates & working of items are as per estimates and calculation in the schedule "B" are arithmetically checked and found correct.
Deputy Executive Engineer Executive Engineer
Project Implementation Unit Project Implementation Unit
Mahisagar Mahisagar
SCHEDULE- B Page
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01. NIT.pdf
02. SBD.pdf
03. SCHEDULE-B.pdf
04. INDEX SPECIFICATION.pdf
07. CIVIL SPECIFICATION.pdf
08. BUILDING SPECIFICATION PART-I.pdf
08. BUILDING SPECIFICATION PART-II.pdf
08. BUILDING SPECIFICATION PART-III.pdf
08. BUILDING SPECIFICATION PART-IV.pdf
09. CIVIL AND PLUMBING MAKE LIST.pdf
10. ELECTRICAL MAKE LIST.pdf
11 GENERAL NOTES.pdf
12 GENERAL NOTES.pdf
13 GENERAL NOTES.pdf
14 GENERAL NOTES.pdf
15. INSURANCE CLAUSE.pdf
15.DEFECT LIABILITY PERIOD GR.pdf
16. ELECTRICAL INSTRUCTION 2023-24.pdf
16. GR ALL SPECIAL CONDITION.pdf
6372 Make List new.pdf
Special_Condition_Items _1_.pdf
Revised Special Conditions of PIU-27-05-2026.pdf
Download all tender documents and submit your bid