15th Finanace commission

Name of the Work: Construction of Village Health Clinic Building at Valasapakala 1 (v) of Kakinada (M) Est Rs 36.00 Lakhs Clearing light Jungle with Light Bushes etc complete as per Technical Specification

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH, including overhead charges & Contractors profit but excluding GST.

Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 0.0 M to 1.0 M

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) including overhead charges & Contractors profit but excluding GST.

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) including overhead charges & Contractors profit but excluding GST and Seigniorage charges.

Plain Cement Concrete corresponding to M 5 grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) including overhead charges & Contractors profit but excluding GST and Seigniorage charges for finished item of work.

Plain cement concrete (1:2:4) prop using 20mm size HBG (SS5) metal including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for foundations and flooring Bed (APSS No. 402) septic tank lean concrete including overhead charges & Contractors profit but excluding GST and Seigniorage charges for finished item of work.

Brick masonry 230 mm thick for panel walls in superstructure with CM (1:6) proportion using II nd class country bricks of size 23x11x7 cm from approved source having crushing strength not less than 35kg/sqcm including cost and conveyance of all materialslike cement, sand, bricks, water etc., to site, including seignorage charges, sales and other taxes on all materials and all operational, incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary, lift charges, curing etc., complete for finished item of work including overhead charges & Contractors profit but excluding GST and Seigniorage charges for finished item of work for Basement

Brick masonry 230 mm thick for panel walls in superstructure with CM (1:8) proportion using II nd class bricks of size 23x11x7 cm from approved source having crushing strength not less than 35kg/sqcm including cost and conveyance of all materials like cement, fine sand(unscreened), bricks, water etc., to site , including seignorage charges, sales and other taxes on all materials and all operational, incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary, lift charges, curing etc., complete for finished item of work complete. including overhead charges & Contractors profit but excluding GST and Seigniorage charges for superstructure.

Reinforced Brick Masonary walls of 11.5cm in CM(1:6) using 2nd cl bricks having a crushing strength of not less than 35.00kg/cm2 and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges for finished item of work as per SS 509 including overheads & contractors profit but excluding GST & Seignorage complete For Superstructure walls

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.including overhead charges & Contractors profit but excluding cost of steel and its fabrication charges,GST and Seigniorage charges for finished item of work. Footings

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.including overhead charges & Contractors profit but excluding cost of steel and its fabrication charges,GST and Seigniorage charges for finished item of work. Pedastals

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.including overhead charges & Contractors profit but excluding cost of steel and its fabrication charges,GST and Seigniorage charges for finished item of work. Columns

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.including overhead charges & Contractors profit but excluding cost of steel and its fabrication charges,GST and Seigniorage charges for finished item of work. Plinth Beam

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.including overhead charges & Contractors profit but excluding cost of steel and its fabrication charges,GST and Seigniorage charges for finished item of work. Roof Beams

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.including overhead charges & Contractors profit but excluding cost of steel and its fabrication charges,GST and Seigniorage charges for finished item of work. Roof Slab 125mm thick

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.including overhead charges & Contractors profit but excluding cost of steel and its fabrication charges,GST and Seigniorage charges for finished item of work. Lintels

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.including overhead charges & Contractors profit but excluding cost of steel and its fabrication charges,GST and Seigniorage charges for finished item of work. Sunshades

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering including overheads & contractors profit but excluding GST & Seignorage complete for finished item of work RCC walls Septic Tank

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering including overheads & contractors profit but excluding GST & Seignorage complete for finished item of work RCC Slab 100mm thick

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering including overheads & contractors profit but excluding GST & Seignorage complete for finished item of work Platforms in Kitchen, Lab& Rooms

Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and including overheads & contractors profit but excluding GST complete for finished item of work.( APSS No.126)

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 12mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, fine sand(screened), water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work (APSS No. 901 & 903) including overheads & contractors profit but excluding GST & Seignorage complete

Ornamental Plastering in CM (1:3) 8mm thick including cost and conveyance of all materials like cement, sand, water etc to siteincluding all operational, incidental and labour cahrges such as mixing, laying, curing, lift charges etc and including cutting Grooves wherever necessary as directed by Engineer-in-charge complete for uneven surface of wall including overhead charges & contractors profit but excluding GST and Seigniorage charges.

Plastering with CM (1:5) to 12mm thick including cost and conveyance of all materials and all labour charges,mixing mortar, scaffolding, lift charges, curring etc.,for finished item of work.

Supplying and fixing of R.C.C Precasted Jalis 50mm thick for ventilators including cost and conveyance of all materials and all labour charges etc., completed including overhead charges & contractors profit but excluding GST

Flooring with vitrified tiles of 1st quality, Double charged/Multi charged set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials.including overheads & contractors profit but excluding GST & Seignorage complete

Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work .including overheads & contractors profit but excluding GST & Seignorage complete

Flooring with Non-skid ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including etc., complete for finished item of work..including overheads & contractors profit but excluding GST & Seignorage complete

Providing skirting to internal walls to 15 cm height/risers of steps with Non Skid tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work .including overheads & contractors profit but excluding GST & Seignorage complete

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work .including overheads & contractors profit but excluding GST & Seignorage complete

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuouschemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontalsurface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge BMT-H. 66 .including overheads & contractors profit but excluding GST & Seignorage complete

Supply and fixing of Sal wood framed Flush shutter Door of size 1.05 x 2.10 mt. with double Flush shutters as per approved of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping including fixing of MS Z hold fasts, MS butt hinges, MS tower bolts, Aldrops - 300 mm long, MS Door handles & door stopper including fixing the fixtures to door with required no.of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete including overhead charges & contractors profit but excluding GST for finished item of work. Door D1

Supply and fixing of Sal wood framed Flush shutter Door of size 0.9 x 2.10 mt. with double Flush shutters as per approved of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping including fixing of MS Z hold fasts, MS butt hinges, MS tower bolts, Aldrops - 300 mm long, MS Door handles & door stopper including fixing the fixtures to door with required no.of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete including overhead charges & contractors profit but excluding GST for finished item of work. Door D2

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multichamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.including overhead charges & contractors profit but excluding GST for finished item of work (Area of window upto 1.75 sqm)

Providing and fixing factory made uPVC any colour fixed glazedwindows / Ventilators comprising of uPVC multi-chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket/TPV,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension..including overhead charges & contractors profit but excluding GST for finished item of work

Cost and supply and fixing of MS welded grill mesh of any nominal including cost and conveyance of all materials and all labour charges including cost of welding rods etc., complete including overhead charges & contractors profit but excluding GST for finished item of work

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member including overhead charges & contractors profit but excluding GST

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame including overhead charges & contractors profit but excluding GST

Painting to new walls with 2 coats of plastic emulsion paint over a primary coat of water based Cement Primer Interior Grade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls including overhead charges & contractors profit but excluding GST and Seigniorage charges internal walls

Painting to new walls with 2 coats of plastic emulsion paint over a priamry coat of water based Cement Primer Exterior Grade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls including overhead charges & contractors profit but excluding GST and Seigniorage charges external walls

Painting to New wood work with two coats of ready mixed first quality synthetic enamel paint of approved brand over primary coat of wood primer after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials,cost of brushes, water to site, etc, and labour charges,curing etc., complete for finished item of work.

Painting to New Iron work with two coats of ready mixed first quality synthetic enamel paint of approved brand over primary coat of red oxide after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials,cost of brushes, water to site, etc, and labour charges,curing etc., complete for finished item of work.

Elecrification Supply and Fixing of 25mm dia 1.80/2.00mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.including overhead charges & contractors profit but excluding GST for finished item of work.

Supply and Fixing of 20mm dia 1.5mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and Modularplate covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings including overhead charges & contractors profit but excluding GST

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 20A 1 Way 1 Module Modular Switch with Indicator, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings including overhead charges & contractors profit but excluding GST

Supply and run of 1 of 14 /0.3mm (1.00Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. including overhead charges & contractors profit but excluding GST

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth Continuty inlcuding all labour charges etc., complete. including overhead charges & contractors profit but excluding GST

Supply and run of 2 of 56/0.3mm (4 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete. including overhead charges & contractors profit but excluding GST

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. including overhead charges & contractors profit but excluding GST including overhead charges & contractors profit but excluding GST

Supply and Fixing of 16A/20A 3pin and 6A 3pin plug socket and 16A switch control duly recessed in wall with metal deep box of covered with modular covering plate including earth connections and all labour charges etc., complete. including overhead charges & contractors profit but excluding GST

Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories. including overhead charges & contractors profit but excluding GST

Supply and erecting step type Modular regulator for ceiling fans 1200mm sweep complete erected on existing board. including overhead charges & contractors profit but excluding GST

Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original.including overhead charges & contractors profit but excluding GST

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: CATEGORY I : a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix /Jaquar /HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic/Ecolink/Capart. b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight. including overhead charges & contractors profit but excluding GST

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation). including overhead charges & contractors profit but excluding GST

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete including overhead charges & contractors profit but excluding GST

Supply and fixing TPN Distribution board with IP-20 protection (Metal Door) suitable for single phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete. Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) including overhead charges & contractors profit but excluding GST

Supply and Run of 4 of 16 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains. including overhead charges & contractors profit but excluding GST

Supply and Transportation of 1 HP Single phase ISI Mono block CI body motor pumpset (25x25mm). Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 as per SSR including overhead charges & contractors profit but excluding GST

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap of approved make including cost and conveyance of all materials and labour charges etc., complete including overhead charges & contractors profit but excluding GST

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components of approved make including cost and conveyance of all materials and labour charges etc complete including overhead charges & contractors profit but excluding GST

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 of approved make including cost and conveyance of all materials and labour charges etc., complete including overhead charges & contractors profit but excluding GST

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 including overhead charges & contractors profit but excluding GST

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm including overhead charges & contractors profit but excluding GST

Supplying & Fixing 75 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc complete. including overhead charges & contractors profit but excluding GST

Supplying & Fixing 90 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc. complete including overhead charges & contractors profit but excluding GST

Supplying & Fixing 110 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc. complete including overhead charges & contractors profit but excluding GST

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials and labour charges etc complete 15.90 mm OD Pipe including overhead charges & contractors profit but excluding GST

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials and labour charges etc complete 22.20mm OD Pipe (20 mm DN) including overhead charges & contractors profit but excluding GST

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials and labour charges etc complete 22.20mm OD Pipe (20 mm DN) including overhead charges & contractors profit but excluding GST

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including overhead charges & contractors profit but excluding GST

Supply of Plastic storage tank lid with hinges including cost and conveyance of all materails and labour charges etc complete. including overhead charges & contractors profit but excluding GST

Supply and Fixing of Round Jali - UPVC/SWR Pipe fittings including labour charges etc complete.including overhead charges & contractors profit but excluding GST

Supply and Fixing of 12.7mm N.P bib tap Indian make including cost and conveyance of all materails and labour charges etc complete. including overhead charges & contractors profit but excluding GST

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated including overhead charges & contractors profit but excluding GST

Supply and Fixing of 12.7 mm brass stop cock Indian make heavy duty Ist quality including cost and conveyance of all materials and labour charges etc complete including overhead charges & contractors profit but excluding GST

Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated including cost and conveyance of all materials and labour charges etc complete including overhead charges & contractors profit but excluding GST

Supply and fixing of 25mm Gunmetal (GM) Ball valve with SS Ball and SS Spindle Indian make heavy type including cost and conveyance of all materials and labour charges etc complete including overhead charges & contractors profit but excluding GST

Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size including cost and conveyance of all materials and labour charges etc complete including overhead charges & contractors profit but excluding GST

Drilling for bore 50 o 100mm diameter in all soils except hard rock standing water then insering GI/PVC pipe to a finished dia of 50mm to 65mm with hand bore set including fixing of pipes specials and all labour charges but excluding cost of pipes and specials etc. as per approved for RWS dept including overhead charges & contractors profit but excluding GST

Cost and supply of 63mm dia PVC pipe of 6 kgs/ cm2 including all labour charges and unloading charges with specials and all labour charges etc complete including overhead charges & contractors profit but excluding GST