Loading
Loading…
Loading…
Tender Value
₹2.2 L
EMD Value
₹4,350
Closing Date
17 Jul 2026, 2:00 pm
Executive Engineer (A-I), Berhampore-II (A-I) Divn
24 Kalikapur road near Air Strip Maidan, Berhampore, Murshidabad.
Lifting and lowering of Submersible Motor Pump Set in different MI Installation (DTW/HDTW/MDTW) under Lalbagh (A-I) Sub Division within Berhampore-II(A-I) Division, Berhampore, Murshidabad under Non-Plan
2026_WRDD_1030565_1
WRDD/EE/(A-I)/Ber-II/ eNIT- 03 of 2026-27
Open Tender
ELECTRICAL WORKS M/R
365 days
Lalbagh (A-I) Sub-Division
Please refer Tender documents.
4 documents required · 4 mandatory
₹4,350
3 Jul 2026
3 Jul 2026
20 Jul 2026
3 Jul 2026
17 Jul 2026
3 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Withdrawal of electro motor submersible pumping set of following capacities from within the tubewell housing pipe of the following length by using all necessary requisites tools and plants and carefully as per direction of Engineer-in-Charge and stacking the same properly at site within the tubewell premises complete.a) 100/150/200 Cubic metre per hour capacity electro motor pumping set. | |||||
| 1.01 | Length of pump assembly of any length exceeding 18 meter length. | - | Each set | - | - |
| 2Installation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the following depth as per direction by fitting, fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controller/starter point including opening out of the top cap of housing pipe of the tube well and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.) a) 100/150/200 Cubic metre per hour capacity electro motor pumping set. | |||||
| 2.01 | Length of pump assembly of any length exceeding 18meter length | - | Each set | 1 | - |
| 3Jointing water proof cable with the leads of the motor including soldering with requisite water proof insulation and proper jointing compound /Valcanized rubber tape so that proper water proof insulation is assured. | |||||
| 4Transportation of submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve column pipes etc.from sub divisional store to worksite including loading at the lifting point and unloading at the delivery paint including necessary head load up to 100 meter at both ends. A) Carriage by road. Distance up to 50 km. | |||||
| 4.01 | (i) 100/150/200 cubic meter per hour (m3/hr.) capacity lector motor pumping set with column pipes and accessories etc. (Full set) | - | Each set | - | - |
| 5Supply fitting & Fixing of 150mm dia Rubber Insertion 5 mm thick with proper einforcement 2 ply conforming top I.S. 638/79 with latest amendments duly ISI Marked subitable for M.S. Flange as per I.s. 6392/71 with standard drilled holes (Table 11,17) | |||||
| 6Supply fitting, fixing nut & bolt | |||||
| 7Add GST @ 18% | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.21 MB
Tendernotice_2.pdf
PDF • 0.46 MB
BOQ_2530613.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid