Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC H NO 02 BALLUPUR ROAD DEHRADUN UK PIN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC ACEEPTED BEING LOWEST TENDER | |
| 2 | L2₹15.8 L+₹42,909.50 (2.79%)Rejected-AOC 270 ADARSH NAGAR ROORKEE HARIDWAR 247667 | HARIDWAR | UTTARAKHAND | 247667 | L2 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 3 | L3₹15.9 L+₹55,895 (3.63%)Rejected-AOC | L3 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 4 | L4₹17.0 L+₹1.6 L (10.5%)Rejected-AOC | L4 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 5 | L5₹17.4 L+₹2.0 L (12.9%)Rejected-AOC | L5 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER |
| Sl No | Description | Qty | Unit | Gaur Construction Co L5 | M/S Anil kumar L7 | M/S VIJAY TRADERS L1 | M/S P K ARORA L8 | KISHORE ENTERPRISES L4 | M/s Gupta Associates L3 | A.S. CONSTRUCTION COMPANY L2 | M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for cutting down removing vegitation plant digging out penetrated roots with tronices looping branches not exc. 10cm girth PROTRUDING over wall roofs by necessary cutting hole in brick / concrete wall/ surfaces and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 and to match the existing work and finishes and removing of debris out side premises/ defence land including necessary scaffolding etc wk will be carried out upto 6th storey height bldgs complete all as specified & directed. | 50 | Each | 200 ₹10,000 | 75 ₹3,750 | 50 ₹2,500 Lowest | 120 ₹6,000 | 120 ₹6,000 | 50 ₹2,500 Lowest | 100 ₹5,000 | 100 ₹5,000 |
| 2.00 | M&L for reinforced Precast cement concrete(1:2:4) type B-1 (using 20 mm graded crushed stone aggregates) as in landing , cover slab (for manholes, shelves), chullah hoods, chajjas, water troughs , mangers, shelves and similar articles with plain faces incluing necessary form work, & set in Cement Mortar (1:4) complete all as specified an directed.
Note:-Reinforcement shall be measured and paid for separately in respective items of Sch "A"/BOQ | 8 | Cum | 4,000 ₹32,000 | 4,800 ₹38,400 | 4,100 ₹32,800 | 5,800 ₹46,400 | 5,500 ₹44,000 | 8,000 ₹64,000 | 8,000 ₹64,000 | 3,600 ₹28,800 Lowest |
| 3.00 | M&L for cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in lintels upto 1.5 clear span , cills steps seismic and other similar bands, copings, hold fast and the like incluing weathering , slightly rounded or chamfered angles and throating asdirected with and icluding necessary form work in CM 1:4 complete all as specified an directed. | 0.1 | Cum | 4,000 ₹400 Lowest | 6,000 ₹600 | 4,800 ₹480 | 5,400 ₹540 | 5,000 ₹500 | 8,000 ₹800 | 5,000 ₹500 | 4,000 ₹400 Lowest |
| 4.00 | Supply only liquid water proofing compound ISI marked complete all as specified and directed. | 10 | Ltr | 150 ₹1,500 | 100 ₹1,000 | 130 ₹1,300 | 150 ₹1,500 | 100 ₹1,000 | 200 ₹2,000 | 90 ₹900 Lowest | 100 ₹1,000 |
| 5.00 | M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate as in foundation filling & Mass concrete , sub base complete all as specified and directed. | 12 | Cum | 3,200 ₹38,400 | 3,000 ₹36,000 | 2,700 ₹32,400 Lowest | 2,800 ₹33,600 | 2,800 ₹33,600 | 4,800 ₹57,600 | 3,800 ₹45,600 | 3,500 ₹42,000 |
| 6.00 | M&L for cement concrete type C1 (1:3:6) 20mm graded stone agg as in bonders (for stone walling) and setting the block slab etc in cement mortar 1:6 complete all as specified and directed. | 1 | Cum | 3,700 ₹3,700 | 3,800 ₹3,800 | 3,000 ₹3,000 Lowest | 3,600 ₹3,600 | 3,100 ₹3,100 | 9,000 ₹9,000 | 3,800 ₹3,800 | 3,600 ₹3,600 |
| 7.00 | M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in surface channel and drain incluing necessary form work complete all as specified and directed. | 12 | Cum | 3,800 ₹45,600 | 3,000 ₹36,000 | 2,900 ₹34,800 Lowest | 3,600 ₹43,200 | 3,500 ₹42,000 | 4,600 ₹55,200 | 4,200 ₹50,400 | 3,200 ₹38,400 |
| 8.00 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. | 620 | RM | 35 ₹21,700 | 15 ₹9,300 Lowest | 35 ₹21,700 | 30 ₹18,600 | 30 ₹18,600 | 40 ₹24,800 | 50 ₹31,000 | 50 ₹31,000 |
| 9.00 | M&L for Brick work with sub class ‘B’ bricks, straight or curves on plan exc 6 mtr mean radius using old size bricks built in Cement Mortar (1:4), complete all as specified and directed. | 8 | Cum | 4,150 ₹33,200 | 4,400 ₹35,200 | 4,100 ₹32,800 | 4,500 ₹36,000 | 4,500 ₹36,000 | 4,700 ₹37,600 | 4,200 ₹33,600 | 4,000 ₹32,000 Lowest |
| 10.00 | M&L for Brick work with sub class ‘B’ bricks, straight or curves on plan exc 6 mtr mean radius using old size bricks built in Cement Mortar (1:6), complete all as specified and directed. | 20 | Cum | 4,100 ₹82,000 | 4,300 ₹86,000 | 3,900 ₹78,000 Lowest | 4,800 ₹96,000 | 4,000 ₹80,000 | 4,300 ₹86,000 | 4,200 ₹84,000 | 4,100 ₹82,000 |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
19 Apr 2025, 6:00 pmClosed
GE I RND DEHRADUN
GE I RND DEHRADUN DEAL RESIDENTIAL COMPLEX RAIPUR ROAD DEHRADUN 248008
REPAIR/MAINT TO COMPOUND WALL, GATE, FENCING, PCC PATH AND MISC B/R WORKS AT RESIDENTIAL AND TECH AREA OF IRDE UNDER GE(I) RND DEHRADUN
2025_MES_702314_1
GE(I)RND/9438/E8/25-26
Open Tender
Civil Works
Item Rate
180 days
Dehradun
Class E Category a (i) FOR UNENLISTED CONTRACTOR (i) Enlistment criteria may be seen in Para 1.4 and 1.5 of section of Part I of MES Manual on contracts-2020 as available in all MES formations (ii) Copy of police verification /passport.
6 documents required · 6 mandatory
₹500
Yes
GE I RND DEHRADUN
₹44,000
Yes
11 Aug 2025
22 Mar 2025
21 Apr 2025
22 Mar 2025
19 Apr 2025
5 Apr 2025
22 Mar 2025 - 5 Apr 2025
Amount
M&L for cutting down removing vegitation plant digging out penetrated roots with tronices looping branches not exc. 10cm girth PROTRUDING over wall roofs by necessary cutting hole in brick / concrete wall/ surfaces and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 and to match the existing work and finishes and removing of debris out side premises/ defence land including necessary scaffolding etc wk will be carried out upto 6th storey height bldgs complete all as specified & directed.
M&L for reinforced Precast cement concrete(1:2:4) type B-1 (using 20 mm graded crushed stone aggregates) as in landing , cover slab (for manholes, shelves), chullah hoods, chajjas, water troughs , mangers, shelves and similar articles with plain faces incluing necessary form work, & set in Cement Mortar (1:4) complete all as specified an directed. Note:-Reinforcement shall be measured and paid for separately in respective items of Sch "A"/BOQ
M&L for cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in lintels upto 1.5 clear span , cills steps seismic and other similar bands, copings, hold fast and the like incluing weathering , slightly rounded or chamfered angles and throating asdirected with and icluding necessary form work in CM 1:4 complete all as specified an directed.
Supply only liquid water proofing compound ISI marked complete all as specified and directed.
M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate as in foundation filling & Mass concrete , sub base complete all as specified and directed.
M&L for cement concrete type C1 (1:3:6) 20mm graded stone agg as in bonders (for stone walling) and setting the block slab etc in cement mortar 1:6 complete all as specified and directed.
M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in surface channel and drain incluing necessary form work complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks, straight or curves on plan exc 6 mtr mean radius using old size bricks built in Cement Mortar (1:4), complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks, straight or curves on plan exc 6 mtr mean radius using old size bricks built in Cement Mortar (1:6), complete all as specified and directed.
M&L for Brick work with except’ bricks, straight or curves on plan exc 6 mtr mean radius using old size bricks built in Cement Mortar (1:6), complete all as specified and directed.
M&L for Walling of random, rubble, stone masonary brought upto courses, well bonded bedded and soilidly hearted and built in cement mortar (1:6) complete all as specified and directed.
M&L for Mild Steel TMT bar, 8 mm dia & Over , cut to length, bent to shape require, including cranking , bending spirally for hooping for columns ,hooking ends and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.
M&L for S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with and including dismantling of Plain or corrugated steel sheeting, any gauge and any thickness, roof coverings complete all as specified and directed.
M&L for S&F Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with and including dismantling of Plain or corrugated steel sheeting, any gauge, and any thickness, complete all as specified and directed.
S & F in repair1.25 mm thickness of laths steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete : push pull or manual type complete all as specified and directed.
Fixing only mild steel angle iron in fencing posts, and struts fixed independently without connecting plates, grill etc and cutting to required size and shape, conforming to gde Fe 410-W (Gde E-250) Quality complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.
S&F mild steel angle iron in fencing posts, and struts fixed independently without connecting plates, grill etc and cutting to required size and shape, conforming to gde Fe 410-W (Gde E-250) Quality complete all as specified and directed.
S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of fencing posts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc including Dismentling of barbed wire of any description of any position Complete all as specified and directed
Fixing only concertina coil 2.5 mm dia of core wire in 450 mm circular dia of each coil having a core wire of high carbon spring steel of high tensile strength as per grade of IS-1454(Part-I) with low carbon steel strip punched tape of 19 mm wide, 0.50 mm thick and series of knife edge sharp barb/blades @ 25 mm centre to centre punched all along the length of both sides of strip at regular interval conforming to IS-513 including Dismentling of Concertina coil of any description in any position complete all as specified and directed. Note:- Concertina coil having 50 Rounds per 6 RM.
S&F concertina coil 2.5 mm dia of core wire in 450 mm circular dia of each coil having a core wire of high carbon spring steel of high tensile strength as per grade of IS-1454(Part-I) with low carbon steel strip punched tape of 19 mm wide, 0.50 mm thick and series of knife edge sharp barb/blades @ 25 mm centre to centre punched all along the length of both sides of strip at regular interval conforming to IS-513 including Dismentling of Concertina coil of any description in any position complete all as specified and directed. Note:- Concertina coil having 50 Rounds per 6 RM.
M&L for stainless steel framed work such as in grills, gratings, etc. with end of bars shouldered and/or riveted , or forged in to spikes, framed guard bars, barred iron doors, ladders, framed blusters, walk ways, railings, framework of water tanks and similar work complete all as specified and directed.
Supply and fix of 6 mm dia stainless steel chain,industrial type grade 304 cut to length required and welded complete all as specified & directed.
M&L for100 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work complete all as specified and directed.
M&L providing 100mm thick PCC (cement concrete) 1:2:4 etc type B-2 (using 20 mm graded stone aggregate ) pavement/ramp/floor finsihed fair and event complete all as specified and directed.
M&L for 100 mm thick for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in subbase for laying floor finishes complete all as specified and directed.
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for glossy finish rubber moulded chequered cement concrete tile 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finished complete all as specified and directed.
M&L for Rendering 15mm thick in CM (1:4) on fair faces of brick masonry/ concrete surface on wall with using liquid water proofing compound and finishing the surfaces even and smooth without using extra cement , complete all as specified an directed. Note:- WPC shall be measured & paid for separately as “Supply only item under respective items of Sch "A"/BOQ.
M&L for 20 mm thick cement plaster on fair face of concrete surface including repair of doubing roof/chajja/facia surfaces in CM 1:3 mixed with water proofing compound as per manufacturers instruction finished even and smooth without using extra cement with and including taking down cement or lime plaster of any description complete all as specified and directed. Note:- (i) Water proofing compound shall be measured and paid sepratly. (ii) Work to be carried out upto height of six story building.
Taking down cement or cement lime plaster, any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc with and including removing of debrish taking down plaster out side M.D land complete all as specified and directed.
M&L for raised pointing to random or polygonal rubble masonry, uncoursed or brought upto courses in CM 1:4 complete all as specfied and directed.
M&L for Extra over stone walling for hammer dressing to face stone with max depression on face from straight edge held against the dressed surface not exc 40mm and dressing of face and joints as specified of random rubble walling uncoursed or brought upto coursed or lime or sand stone complete all as specfied and directed.
M&L for Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses etc in Cement mortar ccomplete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by complete removal of existing treatment by electric angle grinder and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and stoping of distempered and painted surface of wall and applying one coats of cement based paint complete all as specified and directed.
M&L for Complete removal of existing treatment of old surface and washing rubbing down and stoping of distempered and painted surface of wall and applying two coats of cement based paint complete all as specified and directed.
M & L for complete removal of existing treatment from wall / Ceiling by using machinery & preparation of new / scrapped surfaces of wall / ceiling with and including applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior paint of required shade ( Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied and 0.90 litre/10sqm over old prepared complete all as specified and directed.
M&L forcomplete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning & applying of on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying t applying two coat of cement based paint complete all as specified and directed.
M&L for Preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint Complete all as specified and directed
M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for preparing of old painted concrete surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
M&L reinforced concrete pipes, Class NP-2 laid and jointed in cement sand mortar 1:2 complete with coller of dia 300 mm complete all as per specification and directed.
M&L for cleaning of open/covered drain and applying a spray of bleaching powder @ 1.00 Kg/Rm area for helthy hygenic atomoshphare including removing of sludge from existing site to at minimum distance of 1.5 Km from the crowded area and also spray of bleaching powder @ 1.00 Kg / Sqm on sludge obtain from existing site complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise described and removal of dismantling materials with and including, removing debris outside MOD Land at contractor is own arrangement , complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed
Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed
Taking down Cast iron/PVC pipe of any dia and size fixed on wall or floor including all fittings with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed
Dismantling of wall and ceiling boards any thickness including cover filletes with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed
Demolition of ( reinforced cement concrete) (reinforcement cut as required to facilitiate demolition) of any description and in any positionnot otherwise specifically provided with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed
Dismantling posts or struts (wood, steel, or RCC) any section, including taking out embedded portion in concrete, brick work, masonry etccomplete all as specified and as directed.
Dismantling of plain or corrugated AC/FIBER/steel sheeting, any gauge, thickness complete all as specified and as directed.
Demolition and breaking up Drain pipes (SGSW, AC or reinforced concrete) 300mm bore set in cement mortar with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed
A.S. CONSTRUCTION COMPANY (BID ID -3280833)
M/s Gupta Associates (BID ID -3280671)
KISHORE ENTERPRISES (BID ID -3283847)
Gaur Construction Co (BID ID -3280333)
M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3280761)
M/S Anil kumar (BID ID -3280574)
M/S P K ARORA (BID ID -3281946)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .