Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-AOC KOLLAM KOLLAM KERALA 673585 | KOZHIKODE | KERALA | 673585 | L1 | Accepted-AOC L1 | |
| 2 | L2₹2.3 L+₹14,077.86 (6.66%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹2.4 L+₹25,956.18 (12.3%)Rejected-Finance | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | RITHU M.V L1 | CHANDUKUTTY K L2 | kakkodi labour contract co.operative society Ltd. No.D3352 L3 |
|---|---|---|---|---|---|---|
| 1.00detailed estimate | ||||||
| 1.00 | 22.3:Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of : i) I course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS: 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) II course of 20 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) III course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IV course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/ sqm. | 56.96 | sqm | 742.6 ₹42,300.72 Lowest | 840 ₹47,848.92 | 833.83 ₹47,497.46 |
| 1.00 | 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | 1 | no | 106.99 ₹106.99 Lowest | 128 ₹128 | 120.14 ₹120.14 |
| 1.00 | 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. | 1 | no | 631.39 ₹631.39 Lowest | 760 ₹760 | 708.95 ₹708.95 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 946.9 | kg | 143.07 ₹1,35,472.98 Lowest | 150 ₹1,42,035 | 160.64 ₹1,52,110.02 |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 51.36 | sqm | 126.1 ₹6,476.62 Lowest | 135 ₹6,933.74 | 141.59 ₹7,272.2 |
| 1.01 | 13.52.2:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work | 51.36 | sqm | 190.27 ₹9,772.46 Lowest | 195 ₹10,015.4 | 213.68 ₹10,974.82 |
| 1.01 | OD356760/2025-2026: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 35.34 | sqm | 468.37 ₹16,554.54 Lowest | 500 ₹17,672.5 | 525.91 ₹18,588.29 |
Tender Value
₹2.5 L
EMD Value
₹6,344
Closing Date
30 Oct 2025, 6:00 pmClosed
ASSISTANT ENGINEER
O/o ASSISTANT ENGINEER lid and ew kakkodi gp
Annual Plan-77/26-TAKE A BREAK MAINTENANCE-General Civil Work-ward 1
2025_LSGD_813668_2
93/LSGD/AE/2025-26
Open Tender
Civil Works - Roads
Item Rate
KAKKODI
Please refer Tender documents.
13 documents required · 13 mandatory
₹560
Yes
₹6,344
Yes
1 Jan 2026
23 Oct 2025
1 Nov 2025
23 Oct 2025
30 Oct 2025
23 Oct 2025
Amount
detailed estimate
22.3:Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of : i) I course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS: 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) II course of 20 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) III course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IV course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/ sqm.
50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.52.2:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
OD356760/2025-2026: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
CHANDUKUTTY K (BID ID -2415883)
kakkodi labour contract co.operative society Ltd. No.D3352 (BID ID -2418336)
Bidder Name
RITHU M.V
CHANDUKUTTY K
kakkodi labour contract co.operative society Ltd. No.D3352
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1360537.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
SBDTAKEA.pdf
Tender Documents • 1.82 MB
FOTTAKE.pdf
Tender Documents • 0.25 MB
PRELIMINA.pdf
Tender Documents • 0.25 MB
AFFIDAVIT.pdf
Additional Documents • 0.24 MB
BOQ_1360537.xls
BOQ • 0.30 MB
NITTAKE.pdf
Other Document • 0.02 MB
EPAY.pdf
Other Document • 0.23 MB
FOIP.pdf
Other Document • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .