Renovation of 1st and 2nd Floor of Office building at

Amount

Dismantling doors, windows and clerestory windows Of area 3 sq. metres and below (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : and as directed by Engineer-incharge. including cost of all heights,labours, tools & plants and all other charges etc., complete

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-chargeincluding cost of all heights,labours, tools & plants and all other charges etc., complete

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. including cost of all heights,labours, tools & plants and all other charges etc., complete

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.including cost of all heights,labours, tools & plants and all other charges etc., complete

Chiselling & Chipping Mosiac floor of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. including cost of all heights,labours, tools & plants and all other charges etc., complete

Providing and laying Double charged Vitrified tiles Size of Tile 800x800 mm

Providing and laying Double charged Vitrified tiles Size of Tile 800x800 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.including cost of all heights,labours,materials, tools & plants and all other charges etc., complete

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. including grouting of joints all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.including cost of all heights,labours,materials, tools & plants and all other charges etc., complete

Providing and fixing false ceiling 12.5 mm thick tapered edge gypsum moisture resistant board at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) as per drawing, all as per standard specifications and as directed including cost of all labour, materials, tools & plants, curing, scaffolding, etc. complete.

15 mm thick cement plaster with CM 1:3 of brick masonry surfaces and Concrete surfaces for INTERIOR plastering up to floor two level, including and finished even and smooth in CM 1 : 3 including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing factory made uPVC white colour Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (including Single / double glass panes, wire mesh and silicon sealent ). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing & fixing 5.5 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. including supply of all material,labours, tools & plants and all other charges etc., complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and laying 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

Providing Steel reinforcement Fe-500D of approved brand (SAIL, TATA TISCON, VIZAG STEEL ) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level of tested Tor steel reinforcement of approved 1st quality as per drawing and as directed at all heights including cost of all labour, materials, tools & plants etc., and other charges complete.

Providing of Centering and shuttering including strutting, propping etc. Lintels, beams, plinth beams, girders, bressumers and cantileversand removal of form for Foundations, footings, bases of columns, etc. for mass concrete, Suspended floors, roofs, landings, balconies and access platform, Columns, Pillars, Piers, Abutments, Posts and Struts and Stairs, (excluding landings) except spiral-staircases including cost of all labour, materials, tools & plants etc., and other charges complete. Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and fixing of 12 mm thick solid toughened glass sheet for the entrance door & similar works, as per drawing and as directed including cost of fabrication, transportation, fixing in position, including supply of all labours, materials,tools & plants, and finishing, all other charges etc., complete.

Providing and fixing of Bricon England 90 Degree Glass To Glass Door Hinge,3mm Thickness,including supply of all labours, materials,tools & plants, and finishing, all other charges etc., complete.

Providing and fixing of 45Cm long H-Link SS Glass Door Handle 'S' including supply of all labours, materials,tools & plants, and finishing, all other charges etc., complete.

Providing and fixing Double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimum 1.25 mm thickness all as directed at all heights including cost of all labour, materials, tools & plants etc., and other charges complete.

Providing and fixing of Cabinets (2100x2100) with teak wood frame, 19 mm thick playwood, 8mm thich Glass and 2mm thick sunmake,to fix the teak wood beading, glass panes, desks, channels, screws, of approved 1st quality Material as per drawing and as directed at all heights including cost of all labour, materials, tools & plants etc., and other charges complete.

Providing and Fixing of Second class Teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with groove cutting, dash fasteners of required dia & length, complete as per design approved by Engineer-in-Charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of 19 mm thick Fire retardant plywood conforming to IS: 5509, for Cabins and Partition walls, panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters. Water proof and Termite proof. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing & Fixing of decorative high pressure 1.5 mm thick laminated sheet (sunmake) of plain / wood grain in gloss / matt/ suede finish with fast gum & high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of Float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) glazing in teak wooden frame for Cabins and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of wooden moulded Corner beading ( 25x25mm or 50x12 mm ) beading to Cabins and Partitions, door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and applying of French spirit polishing: Two or more coats on new works including a coat of wood filler. including cost of all labour, materials, scaffolding, tools and plants,curing etc., complete.

Providing and fixing of Volo Stainless Steel Heavy Duty Telescopic Slide/Drawer Channel - 12 inch (Silver) Sliding hinges for dasks to Cabins with iron screws, plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of ‎In stock lock for drawers with key price for dasks to Cabins with iron screws, plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing bright finished 100x85x5.5 mm (heavy type) brass butt hinges with necessary screws etc. completd.Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of ‎Stainless Steel Corner Brace, 1.5”x1.2” Small Corner Brackets, Heavy Duty 90 Degree Internal Angle Brackets, L Shape Brackets Joint Fastener for Wood Furniture Board Window Cabinet Table for dasks to Cabins with iron screws, plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

Providing and fixing of bright finished 100 mm brass handles for dasks to Cabins with iron screws, plugs and priming coat on unexposed surface etc. complete : as per directions of engineer-in-charge. Including supply of all material,labours, tools & plants and all other charges etc., complete.

ARP ENTERPRISES

SRINIVAS DONDAPATI