Manning and Operation at 1st and 3rd stage of water supply installation and day to day complaints of external electric supply at Lansdowne under GE Lansdowne

Amount

Manning, operation and routine maintenance of pump coupled with electric motors, diesel engine pump set, DG Sets, starters and connected electric equipment/switch gear installed at water supply installation of located at hilly terrain of Ist stage and IIIrd stage including general repairs such as replacement of glands, bearings, replacement of burnt out wires, thimbles of MCCB's/changeover switches/LT panel, filling of lubricants/diesel and replacement of gasket/leathers of flanges of sluice valves, non return valves and pumping line and look after of complete pumping line, gravity main lines from first stage to third stage pump house, cleaning of natural spring removing of suspended particles, mud, rock etc with deputing the following staff for a period of one month including sunday and holidays all as specified and directed by Engrs-in-charge. Contractor will provide the following staff (Semi-Skilled) per day per shift at water supply installation located at hilly terrain:-

First Stage. (a) One shift of one Mate FGM (0800 hrs to 1600 hrs) (b) One shift of one Mate FGM (1600 hrs to 2400 hrs) (c) One shift of one Mate FGM (2400 hrs to 0800 hrs)

Third Stage. (a) One shift of one Mate FGM (0800 hrs to 1600 hrs) (b) One shift of one Mate FGM (1600 hrs to 2400 hrs) (c) One shift of one Mate FGM (2400 hrs to 0800 hrs)

Note:- (a) All material required for repair/replacement will be provided by department and collected by contractor/rep from E/M store yard free for fixing. (b) Suitable reliever shall be provided by contractor at his own arrangements for the person working at installation for their leave/off period. (c) Log sheet for pump/DG Sets will be submitted by the contractor at last day of each month and attendance register will be submitted weekly to Engr-in-charge. (d) Any breakdown/failure occure in the installation the same shall be brought to notice of Engr-in-charge within 30 minutes of happening.

Labour for attending day to day complaints pertains to external electrification at Lansdowne 02 Mate Electrician (Semi Skilled) per day in two different shifts [ Ist Shift : 1600 hrs to 2400 hrs : 01 Mate Electrician 2nd Shift:2400 hrs to 0800 hrs : 01 Mate Electrician ] complete including replacement of burnt / unserviceable HT/ LT electrical items and depositing the same to MES store yard of AGE E / M under GE Lansdowne as directed by the Engineer-in-charge. The repair shall be of the following items:-

Repair to HT / LT overhead lines such as restringing, jumpering, replacing the broken / unserviceable insulators, jumpers, ACSR conductors etc. including cutting / removing the tree branches falling on the overhead lines.

Replacing the HT / LT fuses.

Switching On / Off the HT/LT breakers if required

Repairs to LT cables including binding and joint

Repair of service wire .

Attending break down and restoring electrical supply as directed by Engr-in-Charge

Any other minor work for restoring the electrical supply as directed by Eng-in-Charge

Notes :- (a) Each person ( Electrician / Mate ) employed will be given weekly rest but on different days by proving proper reliever ( Electrician against Electrician and Mate against Mate) is to be provided (b ) The contractor shall provide all necessary tools & plants, discharge rods and different size of ladders suitable for HT / LT lines including safety devices such as handgloves, line man safety belts etc. required for carrying out the repair works. (c) The contractor shall also provide vehicle to maning staff for atending breakdowns.

Defence Auto Works

Pantech Instruments and Services