Construction of FIS Luharda Samardi in Tehsil Sadar Distt. Bilaspur

Excavation in foundation and trenches etc. in earth work in all lead and lifts in all kinds of soil such as pick work, jumper work, blasting work in soft/hard rock chiseling/wedging out of rock) where blasting is prohibited saturated soil including bailing/pumping out of water stacking the excavated soil in 15cm layers, when required into plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (1cement: 6sand: 12 graded stone agg. 40mmnominal size) and curing complete excluding the cost of centring and shuttering in foundation and plionth and to the entire satisfaction of the Engineer-in-charge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor two ceiling not exceeding 4 mtr and removal of the same for in-situ reinforced concrete and plain concrete working:-

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses and the like and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:5:10 (1cement:5sand: 10 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in retaining walls, breast walls and to the entire satisfaction of the Engineer-in-charge.

Demoliton of RCC work manually/ by mechanical means including stacking of steel bars and disposal of unservieable materials within 50 mtrs lead and to the enitre satisfaction of the Engineer-in-charge (for pumping machinary foundation)

Providing and laying cement concrete 1:1.5:3 (1cement: 1.5 sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in: (for pumping machinery foundations).

Providing laying of tor steel reinforcement for RCC work including bending binding cutting and placing in position complete in all depths and heights and to the entire satisfaction of the Engineer-in-charge.