Providing LWSS to Raghupurgarh and Jalori Pass in Block Anni Distt, Kullu (HP)

Amount

Excavation in foundations,trenches etc., in earth work, lift upto 1.50 mts. Stacking the excavated soil not more than 3 mts. Clear from the edge of the excavation & then returning the stacked soil in 15 cms. Layers,when required into plinths sides of foundation etc.,consolidating each deposited layers by ramming & watering & then disposing of all surplus excavated earth as dierected within all leads & lifts as per entire satisfaction of Engineer in charge. ( Pick work 80 % & Jumper work 20 %)

Providing and laying cement concrete 1:3:6 (1cement: 3sand: 6 graded stone agg.20mm nominal size) and curing complete excluding cost of centering and shuttering including all leads and lifts. a) Foundation and plinth.

Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:

Foundations, footings, basis of columns & the like and mass concrete.

Providing Placing &Laying mild /tor steel reinforcement for RCC. work including bending, binding and placing in position complete up to floor two level including all leads and lifts.: a) Tor steel

Providing & fixing Zinc Aluminium Steel Drinking Water Storage tank IS: 15961 and IS: 804 as per Indian standred specification, rising conical proof with HDG roof trusses and lockable Access hatch including all fittings including 1 No. Higher heavy duty cage Ladder GI 1 No Nylon rope and aluminium step access ladder hatch on roof outlet and over flow nozzles level indicator of material of provide by STAC and warranty of 10 Years including fixing of three laps under the roof 65 mm Dia inlet over flow and scour pipe and 80 mm dia and outlet welding all accessories with sluice valve in each points including all leads and lifts with entire satisfaction of engineer in charge.

ROOF SPECIFICATION

Roof Type:- Self Supported Dome Type

Bulk density Kg/Cum.:- 1000Kg/m^3

Sesmic Zone:- Zone IV

Roof Angle:- 8 Degree

Wind Speed:- 180Km/Hr

Roof Structure:- Hot Dippeed Galvanized

TECHNICAL SPECIFICATION OF SHEET

Wall Sheet Yield Strength:- 300MPA

Wall Sheet Tensile Strength:- 340MPA

Elongation:- 18%

Sheet Corrugation Space:- 75 mm

Depth:- 18mm

Thickness:- 0.8mm Each Corrugated Sheet

Make of Sheet:- TATA Bluescope

Sheet Galvanize Coating:- Zinc Alume ZA 150

MOC of Sheet:- Zincalume

TECHNICAL SPECIFICATION OF LINER

Weight/Sqm. (GSM):- 760 gsm

Anti Algae Stabilized:- Yes

Both Side PVC Food Grade:- Yes

Thickness (mm):- 0.8mm

Water Proofness:- 200 PSI

Standred Colour:- Grey

Base Febric:- High Teenacity Polyster Filament Yarn

Temprature:- 10 to 60 Degree Celcius

PH Range:- 3 to 13

Tested:- 2Kg/cm2 for any leaks

Sandeep Kumar

surender kumar govt cont

veerchand

Vivek

OM PRAKASH