REPAIRS TO JOINERY PLASTERING FLOORING PLUMBING SANITARY FITTINGS AND MISC REPAIRS AT TRISHUL LINE NAPIER LINE SIKH LINE BSO YARD COMPLEX 68 MED REGT 76 ARTY BDGE AND OTHER NEAR BY UNITS MD OTM ACCN IN ZONE G AREA AND KHETRAPAL ENCLAVE CHARVA LINE UM

Amount

Material and labour for 15mm thick cement plaster in CM (1:4) on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in CM (1:4) over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even& rough including making of drip course as reqd complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and as directed by Engineer-in-Charge. Note: Rate for form work shall be deemed to be included in the rate quoted by the contractor.

Material and labour for rendering or plastering work 10mm thick in CM (1:3) in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) including demolition of existing brick work complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Providing precast cement concrete, PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate), as in louvres and jallies, 25mm thick (measured solid), including all mouldings, set in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Reinforced cement concrete (nominal mix) 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregates as in coping of walls, canopies, and in the shelves and the like incl form work complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface all as specified.

Material and labour for Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD (Oil emulsion) of any tint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 40mm thick Cement concrete 1:2:4 type B-1(using 20mm graded stone aggregate) as in Floor, finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and as directed by Engineer-in-Charge.

Supply and fix glass dividing strip 3mm thick, 38mm wide and inserted in position to conform to design complete all as specified and as directed by Engineer-in-Charge.

Material and labour non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM (1:4) and demolition of existing tiles complete all as specified and as directed by Engineer-in-Charge.

Material and labour coloured Vitrified Double Charge tiles 8 to10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified and as directed by Engineer-in-Charge.

Material and labour glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:3) and demolition of existing tiles complete all as specified and as directed by Engineer-in-Charge.

Material and labour Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and demolition existing stone slab complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and as directed by Engineer-in-Charge.

Supply and fixed rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including Supply and fix necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank complete all as specified and as directed by Engineer-in-Charge. Make: CAT No: HSWS-0050-02-Pure of M/s. Sintex or Equivalent in Supreme, Polycon, Rolex as approved by GE.

Supply and fixed rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including Supply and fix necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank complete all as specified and as directed by Engineer-in-Charge. Make: CAT No: HSWS-0100-01-Pure of M/s. Sintex or Equivalent in Supreme, Polycon, Rolex as approved by GE.

Supply and fix (concealed/open) 16mm outer dia CPVC pipes and fittings SDR 13.5 pipes & plain CPVC SDR pipes fittings on walls / ceiling including drilling of holes to walls and fixing clamps as required including taking down existing GI tubing complete all as specified and as directed by Engineer-in-Charge.

Fixing only GI tubing 15mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fix (concealed/open) 20mm outer dia CPVC pipes and fittings SDR 13.5 pipes & plain CPVC SDR pipes fittings on walls / ceiling including drilling of holes to walls and fixing clamps as required including taking down existing GI tubing complete all as specified and as directed by Engineer-in-Charge.

All as per Srl item No 23 here-in-before, but fixing only complete all as specified and as directed by Engineer-in-Charge.

Material and labour cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in CM (1:3), cutting n.exc. 10cm girth complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia complete all as specified and as directed by Engineer-in-Charge. Make: Cat Part No: Co466(SP) model Aquarius of Parryware or equivalent model in CERA/ HINDWARE as approved by GE.

Supply and fix in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair Cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement stainless steel plate rack of size 609mm X 609mm X 254 mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement stainless steel plate rack of size 609mm X 762mm X 254 mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement stainless steel plate rack of size 609mm X 914mm X 254 mm mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement stainless steel plate rack of size 787mm X 914mm X 254 mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar Cat No ALD-573 or equivalent model in Kohler or Roca as approved by GE.

Supply and fix in repair brass Chromium plated soap dish, fixed to wall with CP brass screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair Brass Chromium plated towel rail complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No: T1350C of Johnson Fusion series or equivalent in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in repair Brass Chromium plated towel ring complete all as specified and as directed by Engineer-in-Charge. Make: Johnson Fusion series Cat part No: T1351C or equivalent in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge. Make: Johnson VIVA new series Cat part No: T4806C or equivalent in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in repairs Pillar taps Swan Neck suitable for 15mm bore pipe long body fancy type brass CP with Capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed by Engineer-in-Charge. Make :Johnson Magna series Cat part No: T2804C or equivalent in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in repairs Pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed by Engineer-in-Charge. Make: Johnson VIVA new series Cat part No: T4801C or equivalent in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed by Engineer-in-Charge. Make: Cat No. FUS-29037 of Jaquar ‘Fusion' series or equivalent model in Kohler or Roca as approved by GE.

Supply and fix in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or equivalent model in Kohler or Roca as approved by GE.

Supply and fix in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as directed by Engineer-in-Charge. Make: Johnson Eco Cat part No: T3910C or equivalent model in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge. Make Johnson VIVA new series Cat part No: T4808C or equivalent model in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and as directed by Engineer-in-Charge. Make : Johnson Cat part No: S0001C1 or equivalent model in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe complete all as specified and as directed by Engineer-in-Charge. Make Johnson Cat part No: S0006C or equivalent model in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in repair Toilet paper holder of stainless steel complete all as specified and as directed by Engineer-in-Charge. Make: Johnson Fusion series Cat part No: T3254C or equivalent model in Parryware/ CERA/ Hindware as approved by GE

Supply and fix in replacement 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair grating round 100mm size of CP with/without hole complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good of surface including removing /refixing of CI/GI pipe lines complete all as specified and as directed by Engineer-in-Charge. Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately.

Material and labour Textured heavy duty exterior tiles of size 300mmx300mmx10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15mm thick in CM (1:4) including demolition of existing tiles complete all as specified and as directed by Engineer-in-Charge. Make:- Johnson Endura textured design or equivalent model in Kajaria/ Somany as appoved by GE.

Supply anf fix aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining making good the existing surface etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and as directed by Engineer-in-Charge. Make of Sections: Jindal: Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604 or Equivalent as per make listed in PS nad as approved by GE.

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the framecomplete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 69 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description not exc.1 sq. m each complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No.71 above but exc. 1 sq. m but n exc 2 sqm each complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum complete all as specified and as directed by Engineer-in-Charge. Note: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix Factory made 100 % solid wood plastic composite (WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and as directed by Engineer-in-Charge. Note: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Factory made WPC door shutter of 30mm thickness made out of single piece extruded WPC (Wood plastic composite) profile with homogeneous fine cellular structure made with plastic and wood powder hung with door frame using 4" hinges and fixed with self driven screws of 35mm x 8mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

Supply and fix second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with alluminium wire staples complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 4.8mm thick sheet glass ordinery quality and glazing with oil putty in square exc. 0.50 Sqm in each pane including hacking out existing broken glass complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Stainless steel butt hinges medium weight 100mm complete all as specified and as directed by Engineer-in-Charge. Note:- All screws shall be self tapping chrome plated and length of screw not less 38 mm

Supply and fix in repair 150mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Stainless steel Hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and as directed by Engineer-in-Charge. Make: Action tesa, Century ply, Archidply

Supply and fix shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing onecomplete all as specified and as directed by Engineer-in-Charge. Make: Action tesa, Century ply, Archidply

Supply and fix continuous (piano) hinges, stainless steel, Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified and as directed by Engineer-in-Charge.

Material and labour for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

Material and labour for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed by Engineer-in-Charge. Make: STP, Asian paint, Berger paint, Pidilite, Fosroc

Supply and fix in repair for fibre glass reinforced translucent plain sheeting 2.00 mm thick fixed with coach screw and washer in gate, wall etc. complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Magnetic door catcher with powerful magnet of stainless steel and iron catch plate for cupboard shutter complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC (1:4:8) type D2 using 40mm graded aggregate in sub base including demolition of existing floor complete all as specified and as directed by Engineer-in-Charge.

Material and labour for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/ semi pedestal and pattern WC (anglo India type) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair Vitreous china Urinal, Half stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified and as directed by Engineer-in-Charge. Make:Cera/Prayag/Johnson Pedder.

VACON INFRASTRUCTURES (BID ID -3116111)

M/s GM Constructions (BID ID -3126251)

harshraj and co (BID ID -3111890)