Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAccepted-AOC 12 03 BALAKA M G ROAD P S HARIDEVPUR KOLKATA 700104 | KOLKATA | 24 PARAGANAS SOUTH | WEST BENGAL | 700104 | ₹2.6 L | L1 | Accepted-AOC LOWEST |
| 2 | L2₹2.7 LRejected-Finance | ₹2.7 L | L2 | Rejected-Finance HIGHER BIDDER |
| 3 | L3₹2.7 LRejected-Finance | ₹2.7 L | L3 | Rejected-Finance HIGHER BIDDER |
| 4 | L4₹2.7 LRejected-Finance | ₹2.7 L | L4 | Rejected-Finance HIGHER BIDDER |
| 5 | L5₹2.7 LRejected-Finance | ₹2.7 L | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹2.6 L
EMD Value
₹5,293
Closing Date
14 Jan 2026, 2:00 pmClosed
Assistant Engineer
Gate No. 3, Jadavpur University, Main Campus, Kolkata - 700032
Upgradation to CEmOC Centre at L.B. Dutta Rural Hospital, Muchisha, under Budge Budge - II Block in the District of South 24 Parganas, Aluminium Partition for Inverter Room and Server Room
2025_WBPWD_978673_1
05/ASD/SS/P.W. DTE. OF 2025-26
Open Tender
CIVIL WORKS
10 days
L.B. Dutta Rural Hospital
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,293
7 Apr 2026
23 Dec 2025
16 Jan 2026
26 Dec 2025
14 Jan 2026
26 Dec 2025
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film. Natural white. [Note : for estimate purpose construction wing may consider weight of 2-track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M].
Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc). 10-12 Micron thickness Annodizing film. Natural white. [Note : for estimate purpose construction wing may consider weight of Aluminium door @ 9.0 Kg per Sq.M].
Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film.). Natural white. a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqm. [Note : for estimate purpose construction wing may consider weight of Al-Sections for Partition wall @ 5.7 Kg per Sq.M].
Supplying, Aluminium Grill with F channel frame of approved make and brand having ultimate tensile strength of 19 Kg/Sq.m. and modulus of elasticity 7000 kg/ sq.m., with 15 micron anodised fitted & fixed with necessary screws etc. complete as per direction of Engineer-in-charge. Grill made with 10 mm wide and 5.2 mm thick aluminium sheet having expansion width of 66.00 mm and weight not less than 3.26 Kg/Sq.m.
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP). (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating).
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. iv) 5mm thick coloured / tinted / smoke glass.
Please Enable Macros to View BoQ information
stage.html
html • 0.08 MB
technical_2385064.pdf
techsummary_2385064.pdf
finance_2385064.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.79 MB
BOQ_2385064.xls
BOQ • 0.33 MB
2911.pdf
Tender Documents • 0.51 MB
SplTermsConditions.pdf
Additional Documents • 0.21 MB
Download all tender documents and submit your bid