Providing, installation and commissioning of 20 nos. 2.0 TR Capacity Split Type High Wall Inverter Compressor Technology Air Conditioning Machines for the newly constructed Trauma Care Centre, Gomati District Hospital, Udaipur, Gomati, Tripura

Amount

Providing in/c testing and commissioning (except installation) of star rated (minimum 3 star with applicable ISEER according to current industry standard) Split Type High Wall AC machine (Condenser & Evaporator coil pipe should be made of copper) of approved make and technical specification with Inverter Compressor technology operating on non-CFC refrigerant (R-410A/R-32/equivalent refrigerants) as per current industry standard, with free refrigerant pipe as supplied with AC machine, necessary plug top for IDU (with 01(one) year overall machine warranty and 05(five) years compressor warranty) suitable for wall mounting conforming to IS:1391(part-2) specification (except power consumption) suitable for operation on 230 volt, 50 Hz, single Phase, AC supply capable of performing a) Cooling b) Dehumidifying c)Air Circulating d) Filtering having rated cooling capacity should not be less than. A)2.0 TR(rated cooling capacity should not be less than 6000Kcal/hour or 24000Bthur/hour or 7000 watt.

Standard installation of 1.5 TR/2.00 TR capacity Hi-Wall Split type type Air Conditioner in/c repairing of drilled wall by cement mortar, painting in/c necessary insulation,clamping and warping by white masking tape of copper pipes, and also providing electrical 3 pin 16 amp Top for connection in socket & necessary scaffolding etc. complete as per direction of the Engineer-in-Charge.

Supply and installation of additional length of copper pipe of 5/8'' and 1/4'' diameter or suitable diameter for suction and liquid line in a set and wrapping of copper pipes and electric cable between indoor and outdoor unit (1.50 TR & 2.00 TR AC) beyond the standard length as per direction of the Engineer-in-Charge..

Fabrication of M.S. platform for placement of condensing unit by using M.S. angle of (50x50x5) mm size base plate, nuts & bolts / cradle of suitable sizes in/c painting, fitting, fixing grouting by cement mixer as per direction of the Engineer-in-Charge.

Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-Charge.

Providing and connecting Electric cables in/c control cable between MCB to indoor & indoor to outdoor . 4C/3CX 2.5 Sq. mm Copper Cable.

STANDARD ELECTRONICS

M/S SREERAM ENTERPRISE

Eastern Commerce