Electrical Work-CSPZ

Amount

Electrical Work

OD26824/2023-2024:Supplyof / I/T/C 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

OD26825/2023-2024:Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1 kv grade of following size in the existing surface as required (a) Upto 35 sq. mm (clamped with 1mm thick saddle)

OD26826/2023-2024:Supply and fixing of PVC Batten/ angle holder including Connection etc as required.

OD26827/2023-2024:Supply and fixing of following piano type swich/ socket on the existing switch box/ cover including connection etc as required. (d) 6 pin 15/16 amps socket outlet

OD26828/2023-2024:Supply and fixing of following piano type swich/ socket on the existing switch box/ cover including connection etc as required. (c) 3 pin 5/6 amps socket outlet

OD26829/2023-2024:Supply and fixing of following piano type swich / socket on the existing switch box/ cover including connection etc as required. (b) 15/16 amps switch

OD26830/2023-2024:Supply and fixing of following piano type swich / socket on the existing switch box/ cover including connection etc as required. (a) 5/6 amps switch

OD26831/2023-2024:Supply and fixing following rating, double pole, 240 volt, isolator in the existing MCB DB complete with connection, testing and commissioning etc. as required. (A) 63 Amp.

OD26832/2023-2024:Supplying and fixing 5amps,to 32 amps rating, 240 volts, "C" curve miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connection testing and commissioning etc, as required. (A) Single Pole

OD26833/2023-2024:Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (a) upto 450 sqmm sweep

OD26834/2023-2024:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 8 way Double Door

OD26835/2023-2024:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

OD26836/2023-2024:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

OD26837/2023-2024:Supplying & fixing metal box of 180mm X 100mm X 60mm deep(nominal size) on surface or recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6pin 5/6 &15/16 amps socket outlet and piano type switch, connection painting etc. as required

OD26838/2023-2024:Rewiring for light point /fan point /exhaust fan point /call ball point with 1.5sq.mm FRLS PVC insulated copper conductor single core cables earth wire in existing surface/recessed steel/ pvc conduit i/c dismentaling as reqd. etc as required. Group C

OD26839/2023-2024:Wiring for light point /fan point /exhaust fan point /call ball point with 1.5sq.mm FRLS PVC installed copper conductor single core cable in surface / recessed PVC conduit, with piano type switch phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm. FRLS PVC installed copper conductor single core cable etc as required. Group C

OD26840/2023-2024:5.16:Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

OD26841/2023-2024:5.1:Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

OD26843/2023-2024:P/F ABC (aluminium Phosphate) power type fire extinguisher 6 kg capacity complete in all respect wit ISI mark i/c fixing arrangement etc as required.

OD26844/2023-2024: Supply of 15'(380mm)sweep 1400 rpm heavy duty Exaust Fan complete with ring, blade etc as required. ISI marked.

OD26846/2023-2024:SITC of Single phase Monoblock Pump SetComplite With all accsories Workable on 240/415 V,50 Hz AC supply (a)1 Hp (0.75 kw) single phase pump set,head fro 12-30 meter Suction and Delivery 25X25mm.

Electrical Work

122.1.8:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3C*6 sqmm

122.1.41:Supply of 9 Watt LED retrofit lamp suitable for B22 holder

122.2.18:Fabrication, supplying and fixing class B galvanised double overhang arm bracket made out of 250mm long galvanised top tube with cap and 1000mm long 40 mm dia galvanised pipes with tightening bolts complete as required.

122.2.33:SITC of 60W LED Street Light luminaire fitted with lens, top opening driver cover made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with IP 66 protection (a) Total system wattage =60 watt +/- 5% (b) Luminaire Efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection Class- IP-66

122.2.36:SITC of 10W surface/wall mounted LED Bulkhead factual impact dust and water resistant luminaires with IP 65/66 protection

122.2.39:S/I/T/C of LED Tube type luminaire 20 Watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient LEDs with the following:(a) Total system wattage 20 watt +/- 5%(b )Luminous efficacy lumens/watt >=95 (c)Power Factor >=0.95

122.2.126:SITC of wall mounted fan 400mm sweep rated voltage 220-230 AC rated frequency 50HZ speed 1280-1350 RPM with desired color

122.2.7: Fabrication, supply & erection of following size flange mounted hot dip galvanized octagonal pole made from HT steel plate, window with flash cover with full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required. i/c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd, terminal block suitable for 25 sq mm conductor - 4 nos. & shorting links on DIN channel i/cpdg and fixing DIN channel of suitable length,, 6 Amp. SPMCB 'C' characteristics, earth stud, cable support clamp suitable for upto 4x25 sqmm cable. Logo/Name of manufacturer shall be embossed on the pole. Galvanization as per relevant IS.5.0 mtr height, 3 mm thick, bottom dia of 130mm & top dia of 70mm base plate of size 225 x 225 x 12 mm thick

122.2.10.a:Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm (L) ×450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 960 mm long(approx)-8 nos. and reinforcement of cold twisted bars of 8 mm dia- 1400 mm (approx) -6 nos.(with 150 mm spacing) as required with supplying and positioning of 4 nos. foundation bolts 16 mm dia,600 mm long, J type i/c 2 nos. template anchor plates of size 225mm×225mm×3mm and providing DWC HDPE for cable entry and exit as required for 3 m and 5 mtr pole.

M/s Gyan Enterprises

Bidder Name

M/s Gyan Enterprises

bharat electricals & electronics