CERTAIN MISC BR REPAIR MAINT IN WATER SUPPLY AND SEWAGE INSTALLATION AT SECTOR B UNDER GE UTILITY AMBALA

Amount

Material & Labour for complete removal of existing treatment internal as well as external or ceiling and soffits of Over Head Tank and installation of GE utility by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

Material & Labour for applying One coats of white cement based putty on old as well as new plastered surface of Over head tank and installation of GE utility including sand papering the puttied surfaces to form an even and smooth surface complete all as specified and directed.

Material & Labour for preparation of puttied surfaces and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over new or untreated old plastered/ unplastered surfaces of Over head tank and installation of GE utility to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material & Labour for applying two coats of oil bound distemper over a coat of alkali resistant primer over new or untreated old plastered surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

Material & Labour for for applying one coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over new rough plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material & Labour for for applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over old existing rough plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Notes for Periodical services: MOBILISATION OF T&P AND MATERIAL: The Contractor shall complete the following activities within 20 days from the date of commencement of work: (a) Submission of Memorandum of Understanding (MOU) with any of paint manufacturer (b) Obtaining approval of paints & authorized applicator of paints manufacturer from GE (c) Procurement of T&P required for mechanical mode of painting (d) 30% of the quantity of Paints, Primer & Putty required (as per respective manufacturer’s average coverage area) for various items of painting catered in CA COMPENSATION FOR DELAY IN MOBILISATION OF T&P AND MATERIAL BEYOND 30 DAYS: In case of failure on the part of contractor to complete above mobilization within the stipulated period, compensation shall be recovered from the contractor at the rate of Rs. 1,000/- (Rupees one thousand only) per day subject to a maximum of Rs. 1,00,000/- (Rupees one lakh only). Condition 50 of IAFW-2249 (General Conditions of Contracts) shall be deemed amended accordingly. The contractor shall submit original Tax invoices & e-way bills for the entire quantity of materials so procured. The material and T&P collected shall be entered in the MB as “NOT TO BE ABSTRACTED” and shall be duly signed by both the parties.

Supply & fix in repair 15mm bore fancy type, chromium plated, angle cock,/ stop cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange complete all as specified and directed.

Supply and Fix in repair for vitreous china squatting pan of orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed.

Supply and Fix in repair vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

Supply and Fix in repair Vitreous China urinals, bowl type (back or corner wall type), size of 465 x 355 x 265 mm white (minimum) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Vitreous China bowl urinal flat back,, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

Supply and Fix in repair vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window area ( n exc 2 sqm ) Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories including taking down of existing complete all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. (area n exc 2 sqm each).

Supply and Fix in repair PVC valveless, syphonic action type, flushing cistern,10ltr capacity low level, white, with inlet, ball valve, float and handle including bracketse with PVC bend/Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and making all connection complete all as specified and directed.

Supply & Fix in repair 15mm bore for fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and Fix in repair CP Health faucet shower including 1.50 meter long flexible tube complete all as specified and directed.

Demolition and breaking up drain pipes100/75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Supply & Fix in repair PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall/ floor complete all as specified and directed.

Supply & Fix in repair PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall /floor complete all as specified and directed.

Supply & Fix in repair PVC (SWR) bends 110 mm bore complete all as specified and directed.

Supply & Fix in repair PVC (SWR) bends of 75mm radius complete all as specified and directed.

Material & Labour in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outter diameter outlet of 75mm as in repairscomplete all as specified and directed.

Supply & Fix in repair PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door complete all as specified and directed.

Supply & Fix in repair Chromium plated (CP) grating round 100/125 mm size as in repairs complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Supply & fixing Steel water tubing of 15 mm bore, medium grade galvanized, ISI marked with all fittings laids in floor with wall and on ceiling, complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Supply & fixing Steel water tubing of 20 mm bore, medium grade galvanized, ISI marked with all fittings laids in floor with wall , complete all as specified and directed.

Material & Labour for PVC water storage tank 500 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, 15mm Ball valves, high pressure of PTMT with, ISI marked including dismantling of old tanks of of any description complete all as specified and directed.

Material & Labour for PVC water storage tank 1000 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, 20mm Ball valves, high pressure of PTMT with, ISI marked including dismantling of old tanks of of any description complete all as specified and directed.

Taking down existing aluminium door shutter and readjusting,replacing damaged parts like jointing cleats, glazing clips, Neoprene/ EPDM rubber gasket, anodised aluminium snap beading, hinges,screws, locking bolts,door stoppers,handles etc complete all as specified and directed. Note:- Glass pane,wire mesh,hydraulic door closer,floor spring and mortice lock will be measured and paid separately

Supply & Fix in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass ,other parts made of mild steel heavy duty and fixed etc, complete all as specified and directed. Note:- 1. cutting out of existing tile and PCC floor included into quoted rate. 2. After fixing of floor mounted spring Make good existing surface. 3. Taking down and refixing of the shutter shall be included in quoted rate.

Supply & fixed in repair CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed.

Supply & Fix in repair for 15 mm dia Gun-metal, globe or gate valves/ with iron wheel head, screwd both end sor iron pipe and fixed complete all as specified and directed.

Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as specified and directed.

Material and labour Rendering 15mm thick on fair face/other than fair face of brick work or concrete any surface in CM 1:4 finished even and smooth without using extra cement upto top of water tank or installation building, mixing with approved water proofing compound, for roof facia, chajjas, soffits, column, bottom of beam,tank etc.and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. NOTE:- (i) Height of the bldgs is Appx Up to 30 mtr incl Quoted Rates (ii) Supply only WPC will be measured and paid separately under relevant item of BOQ.(iii) Necessary scaffolding and safety equipment included in quoted rate and shall not be pai separtely.

Material & Labour for 10mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for rough cast plaster incl 15 mm thick CM 1:3 on brick work or concrete surface complete all as specified in SSR Part -1 clause 14.22 complete all as specified . Note:Rough cast plaster finish shall be as follow :- After applying the under coat cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggreagte ( Which is generally of size between 6 to 12 mm depanding on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even . The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure the larger aggregate are throughly covered complete all as specified and directed.. Note : (i) Area to be plastered may require to be carried out up to height of 15 m, necessary scaffolding required shall deemed to be included in rate quoted against this item.

Demolition of Brickwork or stone boulder masonry/PCC block masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework & precast concrete articles and disposing off rubbish outside MD land complete all as specified and directed.

Material and labour using old brick work retrived from item no 39.00 with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radious complete all as specified and directed.

Material and labour for brick work with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radious complete all as specified and directed.

Material & Labour for Mirror polishing on existing Kota stone/ marble stone work where ever required to give high gloss finish including repair/ replacement of broken kota stone/marble stone complete all as specified and diected.

Supply & Fix MS as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and for shed rolled angle section use as a truss and for cattel trap, for fixed glazing window frame including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting,welding or riveting, etc., and Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete as spd, similar work conforming to Fe-290 Gde E-165 incl dismantling of old unsv gates /door/post complete all as specified and directed.

Supply and fixing of mild steel framed work as in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets or as in ornamental gates/ cattel trap or other section with gusset lates,rails, braces, grills, pintal etc. complete drilled for fixing steel sheeting or other covering to be prepare for hanging including either hooks or hinges etc. including taking down of existing complete all as specified and directed. conforming to Fe-290 (Gde E-165), and incl dismantling of old unsv gates /door/post complete all as specified and directed and directed.

Material & Labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Supply and fixing for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws or using J hook where as required complete all as specified and directed.

Supply and fixing for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws complete all as specified and directed.

Supply and fixing in repair Steel rolling shutters 1.25mm, with ball bearing, as specified including top cover, anchoring rod, pipe shaft, Hood cover 1.25 mm thick, curtain, hold fast stopper, square bar guide channel, bracket plate, lock plate, handle, sliding lock, pulling hook, hasp and staple and one shop coat of primer; erected in position as directed by Eng- In- charge, push pull or manual type including dismantling of existing shutter any type complete all as specified and directed.

Supply & Fix 19 mm thick PVC board with laminates on both faces for cabinets, bottom, side walls and top walls including all necessary fiffingSupply & Fixixtures. The shutters shall be fixed by using full overlay MS clips on hinges with high quality nickle plated suitable for any type of board upto 24mm thick complete all as specified and directed. Make: Kich code: CP 201 or equivalent in Dorma/Ozone for Builder's hardware. Note: (i) All sides of cabinet shall be measured & paid. (ii) The accessories/builder's harware of front shutter to be fitted shall deemed to included in quoted rates. (iii) Necessary support for hanging the cabinet on wall including fastner, bottom angle support included in quoted rate

Material & Labour for gypsum false ceiling consisting of 600mmX600mm, 5mm(+ 0.25) thick embossed false ceiling sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x1" (25mmX25mm,1mm thick) in square pattern of grid sizes of 2'X2'(600mmX600mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 4mm MS rods at every 1meter interval of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) Angles etc. complete all as specified and directed.

Material & Labour for re-securing/ adjusting existing false ceiling grid, any type and make are required tightening to remove sag portion/ depression in false ceiling grid including replacement of missing sections / part/ suspenders as per existing material and size etc complete all as specified.

Dismantling wall lining, ceiling board (false ceiling) or insulation boards, any thickness, including cover fillets all as directed

Taking down boards of any description and any size as in shelves complete all as specified and directed.

Material & Labour for Metal false ceiling consisting of 600mmX600mm, 5mm(+ 0.25) thick embossed false ceiling sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x1" (25mmX25mm,1mm thick) in square pattern of grid sizes of 2'X2'(600mmX600mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 4mm MS rods at every 1meter interval of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) Angles etc. complete as per direction of Engineer-In- Charge, Manufacturer,specification and drawing.

Supply & Fix of 5-8 mm thick colour PVC panel, hollow profile PVC wall paneling/ lining inclusive of fixing arrangement including screws, side beading, angle, U- channel fixing on wall complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material & Labour 18-20 mm thick Machinie cut Kota stone slab in flooring on treads, landing laid over including 20mm thick screed bed 1:4 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

Repair/Rescuing, easing and adjusting wooden door shutter of any description without taking off shutter from the frame, area of shutter exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, including making good the disturbed area as per existing complete all as specified and directed.

Supply & Fix Powder coated aluminium frame/shutter for doors, windows, ventilators with one or more rebates including joining cleat for fixing, rubber neoprene packing for fixing, including minor fitting like lock, handle, roller for sliding etc. including taking down existing complete all as specified and directed. Note :-1. For payment purpose weight of aluminium section shall be only measured. 2. Cost of aluminum mongry, lock, rubber packing, roller for sliding are included in the quoted rate. 3. Sheet glass and wire gauge shall be measured and paid separately.

Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint complete all as specified and directed.

Supply & Fix tubular curtain rail, stainless steel anodized 20 mm dia all as specified & as directed including taking down unserviceable rod/rail complete all as specified and directed.

Supply & Fix stainless steel type brackets suitable to hold the curtain rod with sofio phenol (Lotto) and wooden round blocks suitable to curtain rod of 20mm dia, decorative type fixed with suitable steel screws and PVC cleats, including taking down unservicable brackets complete all as specified and directed.

Supply & Fix in repairs of 300 mm mild steel helical door spring, including roller and roller plate complete incl welding complete all as specified and directed.

Supply & Fix in repairs stainless steel plate rack of 0.63mm thick sheet, size 31''x36''x10'' complete all as specified and directed. Make: Blue star model : SSKPR -315 or equivalent

Supply & Fix in repair Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball scrured for iron pipe of dia 20 mm bore complete all as specified and directed .

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

Material & Labour Non-skid joint free coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, as in floor set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match colour of tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

Supply & Fix glazed ceramic coloured printed tiles of size 450 x 300X 7mm or 350 x 250x 7mm as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement motor 1:3 complete all as specified and directed.

Material and labour for Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular), tiles, area of each tile exceeding 0.36 sqm but not exceeding 0.72 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Material and labour for Vitrified tile, skirting/dado, light shade with 10 mm thick tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on vertical rates as in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including backing coat of 10 mm thick CM 1:3 complete all as specified and directed.

Demolition of RCC of any description and in any position complete all as specified and directed.

Material & Labour For RCC (1:2:4 ) type Bo (using 12.5 mm graded aggregate ) ,Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like ,complete all as specified and directed .

Material & Labour for Formwork to sides and soffits of floor slab or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Material & Labour for mild steel TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Ser item No 75.00 here in before but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Uprooting scrubs/plant/flora & fauna on wall girth not exceeding 100mm from brick wall by cutting holes into masonry/walls for digging out roots and dosing Sulfuric/Phenolic Acid as per manufacturer's instruction to burn deep rooted tree roots and making good the disturbed area with cement mortar in CM 1:3 using water proofing compound including necessary scaffolding upto a height of 20 metre complete all as specified and directed. Note :-(a) scaffolding incl quoted rate. (b) Plastered paid separetely. (c) Brickwork required qty shall be paid separetely. (d) Any type of tree on walls and on roof including peepal tree.

Material & Labour for PCC 1:5:10 type E-2 using 40mm graded aggregate as in foundation/ sub base of floor complete all as specified and directed.

Material & Labour 75 mm thick PCC type D-2 ,1:4:8 (using 40 mm graded stone aggregate) as in hard standing, path, sub base, sub floor or in flooring and paving etc and ccomplete all as specified and directed.

Demolition of PCC (Unreinforced) in ground floor and pavings n. exc 15 cm thick below or above ground level complete all as specified and directed.

Supply & Fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Material & Labour for 60mm thick (M-35 grade concrete) machine pressed precast concrete interlocking paver block of approved design and shape confirming to IS 15658-2006 with a crushing strength not less than 250 kg/sqmm with grey cement and pigmentlaid over 25mm thick sand cushioning including taking down existing complete all as specified and directed. Note : Sand cushioning will be measured and paid seperately.

Material & Labour for sand cushioning layer of 25mm thick under interlocking tiles complete all as specified and directed.

Material & Labour for Providing cement concrete in edges Type B1 1:2:4 using 20 mm Graded Aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Supply and Fixing chain link fencing size 100mm x 100mm (3.8mm thick dia wire) including line wires and any type of standards, rails, straining bolts etc., including provision of binding wire and taking down existing any type fencing complete all as specified and directed.

Supply and Fixing chain link fencing size 50mm x 50mm (3.8mm thick dia wire) including line wires and any type of standards, rails, straining bolts etc., including provision of binding wire and taking down existing any type fencing complete all as specified and directed.

Note:- Amount of credit of Rs. 226644.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

ANIL CONSTRUCTION CO. (BID ID -3342147)

RONKI RAM AND COMPANY (BID ID -3351267)