KCMC-15th CFC fund 2022-23,2023-24, 2024-25 Tied Grant Balance Fund

Amount

Removal of water Lubricated / oil lubricated vertical turbine pump with motor at site of work including preparation of suitable foundation and bed, fabrication of packer plates from raw materials , cutting required shims , assembling and joining of all required loose components such as bowl assembly, impellor shaft, line shaft, column pipes , head soft, discharge head, bearings, drive unit, delivery side pipes , suitable tappers required valves and specials, pressure gauges and flow meters , adjustment of pump shaft and leveling and alignment checkup greasing of relevant components, grouting of foundation bolts and sole plate with non shrink grout materials of conbextra GP-2 cement erection, connecting the relevant electrical cables with motor properly etc. complete and testing the out put and efficiency, site performance test for noise and vibration and trial run for minimum 10 days and commissioning satisfactorily for the various HP of the vertical turbine pumpsets as given below per IE rules as directed by TWAD Board officers .

Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS - 63B(1979) and M.S. bolts and nuts of IS - 1364 - 1 (2002), including cost of jointing materials such as bolt and nuts, Rubber insertion and labour charges etc., complete flow meter erection

350 mm dia

Supply And Delivery And Driving of the MS Slotted Drain of 300mm inner Dia Meter . As a row in Radial direction including cost of Driving, Welding and charges for Specials Tools and plant etc., Complete including conducting Quantity Test to assure the Yield of water as directed by the Departmental Officers including all tools and plants etc., Complete.

Supply and delivery 350 mm dia of DI D/F Gate (sluice) valves (soft seated) reselient seated soft sealing Gate Valves (Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or GGG 50, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O - Ring protection on the shaft and seals of NBR and the valves should be of Vaccum tight and 100% leak proof with face to face dimensions as per BS 5163 - 89/ ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16

Supply, delivery of fixing of 350mm dia CI Tail piece in the well steining for driving radial pipes

Labour charges for putting bore holes of size 3" to 4" in river bed in sandy and other loose soils using hand boring sets including the cost of hire charges, conveyance charges of hand boring sets, collection of soil sample at frequent intervals and as directed by TWAD Board Officers.

Providing Head Stock arrangement for operating Valves from Operating Platform using 20mm MS round of required height with 100mm GI pipes and 50mm NS shaft fitted with ball bearing at both ends in the top with proper anchoring done with the operation g platform and ms coupling at bottom welded with valve spindle head

Provision for Core Cutting ( 2m x 2m in Collector well side wall and 08 nos 400 mm Circular Core cutting for the new 08 Nos. radial arms)

Hire charges for deploying earth moving machinery (JCB/Poclain) for earthwork including diesel, oil and labour charges etc., complete for Flow Diversion arrangements, formation of approach road to Collector Well and Bed formation for radial arm machineries placement

Erection of water Lubricated / oil lubricated vertical turbine pump with motor at site of work including preparation of suitable foundation and bed, fabrication of packer plates from raw materials , cutting required shims , assembling and joining of all required loose components such as bowl assembly, impellor shaft, line shaft, column pipes , head soft, discharge head, bearings, drive unit, delivery side pipes , suitable tap pers required valves and specials, pressure gauges and flow meters , adjustment of pump shaft and leveling and alignment checkup greasing of relevant compo nents, grouting of foundation bolts and sole plate with non shrink grout materials of conbextra GP-2 cement erection, connecting the relevant electrical cables with motor properly etc. complete and testing the out put and efficiency, site performance test for noise and vi bration and trial run for minimum 10 days and commissioning satisfactorily for the various HP of the vertical turbine pumpsets as given below per IE rules as directed by TWAD Board officers

KEYEM INFRA PROJECT PRIVATE LIMITED (BID ID -1345248)