Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
4 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Pratapnagar Workshop: Electrical work in connection with improvement of sheds.
BRC-EL-P-20-2550-26-27~WR
BRC-EL-P-20-2550-26-27
Open
Works - General
6 Months
Vadodara, Gujarat
₹0
₹1.7 L
11 Aug 2026
11 Aug 2026
21 Aug 2026
90 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | Above/ Below/Par | ||
| — | — | — | 77,02,515 | ||
| — | 240.00 | — | — | ||
| Wiring of light/fan/exhaust fan points in PVC casing-capping/conduit - The price shall cover for wiring of light/fan/exhaust fan point with 1.5 sq. mm, multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS and 1.0 sq. mm, single-core, multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing-capping double lock type, ISI marked of make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions with surface mounted molded polypropylene switch board with modular cover plate of suitable size including switches/angular holders/ceiling rose. Space shall be kept on board to accommodate modular electronic fan regulator. Molded polypropylene switch board shall be as per IS: 14772. The accessories shall be of modular type of C&S/MK/ North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havells/Luminous make. | — | — | — | 87,600 | |
| — | 90.00 | — | — | ||
| Wiring of extra long light/fan/exhaust fan points in PVC casing-capping/conduit (up to approximately 15 meters length) - The price shall cover for wiring of extra long light/fan/exhaust fan point with 1.5 sq. mm, multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS and 1.0 sq. mm, single-core, multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing-capping double lock type, ISI marked of make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/ Modi/Gerard as per site conditions with surface mounted molded polypropylene switch board with modular cover plate of suitable size including switches/angular holders/ceiling rose. The length of the point shall be approximately 15.0 meters. Space shall be kept on board to accommodate modular electronic fan regulator. Molded polypropylene switch board shall be as per IS: 14772. The accessories shall be of modular type of C&S/MK/ North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havells/Luminous make. | — | — | — | 1,17,630 | |
| — | 12.00 | — | — | ||
| Providing plug point 6 Amp in existing board - The price shall cover for providing plug point with modular type universal socket and switch, 6 Amp, 230 Volt, AC on existing board. The accessories shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havells/Luminous make. | — | — | — | 1,164 | |
| — | 50.00 | — | — | ||
| Providing plug point, 6 Amp on separate board - The price shall cover for providing modular power plug point with flush type universal 5 pin socket and switch 6 Amp, 230 Volt AC, 50 Hz on separate surface mounted molded polypropylene switch board with modular cover plate of suitable module with 2.5 sq. mm multi-stranded, PVC insulated, unsheathed FRLS copper conductor and 1.5 sq. mm multi-stranded, PVC insulated, unsheathed FRLS copper conductor in green colour as earthing wire of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing capping double lock type, ISI marked, make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/ Modi/Gerard as per site conditions at an approximate distance up to 3.0 | — | — | — | 12,550 | |
| — | 200.00 | — | — | ||
| Providing board with one switch and one socket, 6 Amp and one switch and one socket 16 Amp - The price shall cover for wiring of multi- plug point (switch, 6 Amp - 1 No, socket, 6 Amp - 1 No, switch, 16 Amp - 1 No and socket, 16 Amp - 1 No) on separate surface mounted polypropylene switch board with modular cover plate of suitable module with 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire in medium grade PVC casing capping, double lock type, ISI marked of Modi/Precision/Gerard/Prestoplast make or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions at an approximate distance up to 3.0 meter or as per site requirement. PVC box shall be as per IS: 14772. | — | — | — | 1,19,400 | |
| — | 1050.00 | — | — | ||
| Wiring of sub-main with copper wire, single-core, 4.0 sq. mm in PVC casing-capping/ conduit - The price shall cover for wiring of two wire sub-main with 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in medium grade PVC casing capping of not less than 25 mm size, double lock type, ISI marked of make Prestoplast/Precision/Modi/Gerard or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions. | — | — | — | 1,22,850 | |
| — | 40.00 | — | — | ||
| Wiring of light/fan/exhaust fan points in concealed manner with modular accessories - The price shall cover for concealed wiring of light/fan/exhaust fan point with 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/Prestoplast/Gerard make. The accessories shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/ Havells/Luminous make. | — | — | — | 16,320 | |
| — | 8.00 | — | — | ||
| Providing plug point 6 Amp in concealed manner on separate board with modular accessories - The price shall cover for providing power plug point with modular type universal socket and switch, 6 Amp, 230 Volt, AC on separate board with modular accessories in concealed manner. The accessories shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/ Havells/Luminous make. The price shall also cover for concealed wiring of plug point with 2.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/Prestoplast/Gerard make. | — | — | — | 2,680 | |
| — | 2.00 | — | — | ||
| Providing plug point 16 Amp in concealed manner on separate board with modular accessories - The price shall cover for providing power plug point with modular type universal socket and switch, 16 Amp, 230 Volt, AC on separate board with modular accessories in concealed manner. The accessories shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/ Havells/Luminous make. The price shall also cover for concealed wiring of plug point with 4.0 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 2.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/Prestoplast/Gerard make.2 | — | — | — | 892 | |
| — | 200.00 | — | — | ||
| Concealed wiring of sub-main with 2.5 sq. mm in PVC conduit - The price shall cover for concealed wiring of sub main with two-wire single core 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in concealed manner as per site requirement in PVC conduit. | — | — | — | 17,800 | |
| — | 12.00 | — | — | ||
| Providing electronic fan regulator, modular type - The price shall cover for supply, fixing, testing and commissioning of hum-free modular type electronic fan regulator suitable for 80/100-Watt ceiling fan of step type with 'OFF' position, surface/flush type on existing board and its connection from existing supply. Miniature switch type regulators shall not be accepted. The regulator shall be of Anchor-Roma/Cona/ Leader/Crabtree/Legrand/C&S/HPL/Indo Asian/Havells/Standard/Bentec/Elleys/Precision make. | — | — | — | 3,348 | |
| — | 12.00 | — | — | ||
| Fixing, testing and commissioning of ceiling fan - The price shall cover for fixing, testing and commissioning of ceiling fan on existing hook and its connection by FRPVC insulated, flexible copper cord, 1100 Volt grade, 24/0.20mm from existing ceiling rose with earth connection. A suitable suspension clamp made from G.I. flat of 40 x 6 mm with MS 'S' shaped hook of diameter not less than 10 mm shall be provided as per site requirement if fan hook is not available and is included in the scope of work. The ceiling fans shall be supplied by railways at site in-charge's office/store. | — | — | — | 2,076 | |
| — | 11.00 | — | — | ||
| Providing heavy-duty Exhaust fan 300 mm sweep/heavy duty with louver/bird guard - The price shall cover for supply of heavy duty, industrial Exhaust Fan of metal body, 300 mm sweep with bird guard operating on 230 Volt, 50 Hz AC supply complete with all accessories of make Crompton Greaves/ GEC/Almonard/Usha/Bajaj. The price shall also cover for fixing, testing and commissioning of the Exhaust Fan on existing pocket with rake bolts/Anchor fasteners of suitable size as per site condition, and its connection from existing ceiling rose with three-core, 24/0.20 mm size, FRPVC insulated, flexible copper wire of 1100 Volt grade. | — | — | — | 16,071 | |
| — | 30.00 | — | — | ||
| Providing Air circulator fan, 750 mm sweep, heavy-duty, industrial type complete with all accessories - The price shall cover for supply of heavy duty, wall mounted, Air Circulator fan, 750 mm sweep (approximately) having aluminium alloy one piece blade, double ball bearing, 90° oscillation, sturdy, closed mesh guard, single phase motor, to work on 230 Volt, 50 Hz single phase AC supply. The air circulator fan shall be of ALMONARD/USHA/GEC/Crompton Greaves make and shall be got approved by site engineer before supply. The Air Circulator fan shall be provided with three core FRPVC copper flexible cord 48/0.20 mm size of suitable length. The Air Circulator shall be fitted on the structure/wall/pillar by providing M.S. clamp of 50 x 5 mm made from M. S. flat duly painted with two coats of anti-corrosive red oxide and two coats of silver enamel paint by providing proper rake bolts. The circulator shall be connected with existing supply point as per site conditions. | — | — | — | 2,42,250 | |
| — | 50.00 | — | — | ||
| Wiring of sub-main with copper wire, single-core, 6.0 sq. mm - 6 Nos and 2.5 sq. mm - 2 Nos in PVC conduit/casing-capping with junction box - The price shall cover for wiring of six wire sub-main with 6.0 sq mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with six wires of 6.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and two wires of 2.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in green colour as earthing wire in medium grade PVC casing capping of not less than 25 mm size, double lock type, ISI marked of make Prestoplast/Precision/Modi/ Gerard or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/ Precision/Modi/Gerard with heavy duty PVC junction box as per site conditions. | — | — | — | 20,950 | |
| — | 110.00 | — | — | ||
| Providing catenaries with PVC insulated copper wire, single-core, 4.0 sq. mm - 5 Nos in PVC conduit - The price shall cover for providing catenary with five wires of 4.0 sq. mm single core multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in PVC conduit of not less than 25/32 mm size (approximate) with junction boxes, ISI marked, make Precision/Gerard/ Modi/Prestoplast. The wiring is to be carried out in such a way that it should provide termination/connection to light/fan point/signages/stalls/ water coolers etc. Necessary heavy duty Bakelite connector strip of 10/16/32 Amp capacity and requisite number of ways to be provided for each point. | — | — | — | 1,10,880 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of five-star rated instantaneous storage geyser of 3.0 liter capacity - The price shall cover for supply of energy efficient, five-star BEE rating, instantaneous type geyser, 3.0 liter capacity, heating element of 2000 Watt, having inner tank material of mild steel with glass lined coating and outer body of ABS + PP (rust proof), adjustable stem type thermostats, fusible safety plug operating on pressure of 8 Bar and 4 in 1 multifunctional safety valve. The geyser shall be ISI marked with inlet and outlet hoses of suitable diameter and length and gun metal inlet stop valve. The geyser shall be supplied complete with three-core, PVC insulated, copper wire, ISI marked and 15 Amp plug top. The geyser shall be of VENUS/RACOLD/SPHEREHOT/BAJAJ/CROMPTON GREAVES make.The price shall also cover for fixing, testing and commissioning of storage type geyser, 6.0 liter capacity. The scope of work includes supply and fixing of Anchor fasteners, nut bolts, supply of accessories, modification/rectification of civil works such as inlet-outlet water connection pipes of suitable capacity and size, plumbing, wiring etc. required to install the Geyser at desired location. | — | — | — | 8,818 | |
| — | 50.00 | — | — | ||
| Providing single-phase, 20 Amp ray roll plug and socket with MCB DP, 16/20 Amp in weather proof box - The price shall cover for supply, erection, testing and commissioning of single-phase power plug board with one MCB DP, 16/20 Amp, ray-roll socket, 20 Amp and LED indication lamp in weather proof MS enclosure. The MCB shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/ Havells make. The MS enclosure shall be properly earthed. | — | — | — | 60,300 | |
| — | 12.00 | — | — | ||
| Providing three-phase, 32 Amp ray roll plug and socket with MCB TPN, 32 Amp in weather proof box - The price shall cover for supply, erection, testing and commissioning of three-phase power plug board with one MCB TPN, 32 Amp, ray-roll socket, 32 Amp and LED indication lamp in weather proof MS enclosure. The MCB shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/ Havells make. The MS enclosure shall be properly earthed. | — | — | — | 62,712 | |
| — | 12.00 | — | — | ||
| Supply, fixing, testing and commissioning of three-phase, 415 Volt, complete with MCCB, three-pole, 63 Amp, heavy duty plug-socket, 63 Amp, MCB DP, 20 Amp and ray roll plug and socket, 20 Amp in MS outdoor type enclosure - The price shall cover for supply of three-phase power plug and socket as per below mentioned specifications -(i) Three-phase, 415 Volt power plug and five-pin socket, 63 Amp of BCH make, Cat. No. DS6A7A1 or similar model of L&T/SIEMENS/HPL --- 1 No(ii) Single phase, 230 Volt power plug and three-pin socket, 20 Amp of BCH make, Cat. No. MPSEU202 or similar model of L&T/SIEMENS/HPL --- 1No(iii) MCCB, four-pole, 63 Amp, with thermal-magnetic release range 50 - 63 Amp, Ics = 100% Icu having 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be supplied with spreader terminals and rotary handle. The MCCB shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/ Havells make --- 1 No(iv) MCB DP, 10 KA breaking capacity, 20 Amp of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/CGL/ Schneider/Havells make --- 1 No(v) Outdoor type enclosure fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, wall/pillar mounted, dust and vermin proof, water resistant confirming to relevant IS. The enclosure shall fabricated for three-phase, four-wire, 440 Volt AC, 50 Hz supply system.(vi) The enclosure shall be internally wired by suitable size FRPVC insulated, single core flexible copper multi-stranded wires with crimped copper lugs.The price shall also cover for fixing testing and commissioning of the enclosure securely on cover shed pillars/rails/wall with necessary M.S. clamps, nuts, bolts etc. The drawing, design of plug socket, switchgears with make and model shall be got approved from site-engineer before fabrication and supply. | — | — | — | 1,34,016 | |
| — | 22.00 | — | — | ||
| Providing lighting control board with MCB DP, 32 Amp - 1 No, Time Switch, 16 Amp - 1 No and Single-Phase Contactor, 32 Amp - 1 No - The price shall cover for supply, fixing, testing and commissioning of lighting control board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The board shall be equipped with MCB DP, 10 KA breaking capacity, 32 Amp rating - 1 No, Time switch, 16 Amp - 1 No and Single phase contactor of rating 32 Amp - 1 No. The MCB shall be of ABB/L&T/HPL/GE/ MDS/Siemens/BCH/C&S/CGL/Schneider/Havells make, the contactor shall be of L&T/BCH/C&S/CGL/ Schneider/Siemens make and Digital Time Switch "CRONO" of L&T make or similar of Siemens/Minilec make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. | — | — | — | 86,834 | |
| — | 10.00 | — | — | ||
| Providing lighting control board with MCB DP, 32 Amp - 2 No5, Time Switch, 16 Amp - 2 Nos and Single-Phase Contactor, 32 Amp - 2 Nos - The price shall cover for supply, fixing, testing and commissioning of lighting control board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The board shall be equipped with MCB DP, 10 KA breaking capacity, 32 Amp rating - 2 Nos, Time switch, 16 Amp - 2 Nos and Single phase contactor of rating 32 Amp - 2 Nos. The MCB shall be of ABB/L&T/HPL/GE/ MDS/Siemens/BCH/C&S/CGL/Schneider/Havells make, the contactor shall be of L&T/BCH/C&S/CGL/ Schneider/Siemens make and Digital Time Switch "CRONO" of L&T make or similar of Siemens/Minilec make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. | — | — | — | 42,110 | |
| — | 7.00 | — | — | ||
| Providing Distribution Board with incomer MCB TPN, 40 Amp - 1 No, RCBO, four-pole, 40 Amp - 1 No and outgoing MCB DP, 10/16/20 Amp - 8 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN, 40 Amp - 1 No, RCBO, four-pole, 30 mA sensitivity, 40 Amp - 1 No and outgoing MCB DP, 10/16/20 Amp - 8 Nos. The MCBs/RCBOs shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/Havells make. The board shall be completely wired with multi- stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. The Distribution Board shall be suitable for surface/recessed installation. | — | — | — | 1,58,137 | |
| — | 4.00 | — | — | ||
| Providing Distribution Panel with incomer MCCB, four-pole, 400 Amp - 1 No and outgoing MCCB, four-pole, 250 Amp - 2 Nos and MCCB, four-pole, 125 Amp - 6 Nos with indication lamp, earthing terminals and all accessories - The price shall cover for design, supply, installation, testing and commissioning L.T. Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switch gears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved from site engineer before fabrication.The LT panel shall be indoor/outdoor, rectangular cubicle type, dust and vermin proof suitable for three-phase, four-wire, 415 Volt, 50 Hz AC supply system. Detailed description is given in Annexure-XXI of tender document. | — | — | — | 6,69,004 | |
| — | 1.00 | — | — | ||
| Providing Distribution Panel with incomer MCCB, four-pole, 400 Amp - 1 No and outgoing MCCB, four-pole, 160 Amp - 3 Nos, MCCB, four- pole, 125 Amp - 3 Nos and MCCB, four-pole, 63 Amp - 4 Nos with multifunctional energy meter, indication lamp, earthing terminals and all accessories - The price shall cover for design, supply, installation, testing and commissioning L.T. Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switch gears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved from site engineer before fabrication.The LT panel shall be indoor/outdoor, rectangular cubicle type, dust and vermin proof suitable for three-phase, four-wire, 415 Volt, 50 Hz AC supply system. Detailed description is given in Annexure-XXI of tender document. | — | — | — | 1,70,897 | |
| — | 4.00 | — | — | ||
| Providing Distribution Panel with incomer MCCB, four-pole, 630 Amp - 1 No and outgoing MCCB, four-pole, 400 Amp - 2 Nos, MCCB, four- pole, 250 Amp - 2 Nos and MCCB, four-pole, 125 Amp - 6 Nos with multifunctional energy meter, indication lamp, earthing terminals and all accessories - The price shall cover for design, supply, installation, testing and commissioning L.T. Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switch gears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved from site engineer before fabrication.The LT panel shall be indoor/outdoor, rectangular cubicle type, dust and vermin proof suitable for three-phase, four-wire, 415 Volt, 50 Hz AC supply system. Detailed description is given in Annexure-XXI of tender document. | — | — | — | 15,88,736 | |
| — | 100.00 | — | — | ||
| Digging of cable trench 200 mm wide and 200 mm deep in concrete/tar road/platform and refilling to its original position after laying of cable in HDPE pipe, 110 mm diameter - The price shall cover for digging of cable trench of size 200 mm wide and 200 mm deep in concrete/tar road/platform surface and its refilling/ plastering after laying of cable in 110 mm diameter HDPE pipe of Tijaria/Himalyan/Koncept/ Poddar/Unique/Dutron/Reliance/Baba/Shivam make in existing trench. Supply and laying of HDPE pipe, 110 mm diameter is included in the scope of work. | — | — | — | 67,700 | |
| — | 500.00 | — | — | ||
| Supply and laying of RCC half round pipe, 150 mm diameter - The price shall cover for supply of half round RCC pipes of 150 mm inner diameter and 1.0 meter in length as per given description in Annexure-XXI of tender document. The internal surface shall have a smooth finish without any bulge or projections to avoid damage to the cable. The price shall also cover for laying of half round RCC pipes above the cables for mechanical protection on laid cables in the existing trench. After laying of RCC half round pipe, the trench shall be filled up with soil available thereby. | — | — | — | 38,000 | |
| — | 300.00 | — | — | ||
| Supply and laying of HDPE pipe, 110 mm diameter by pushing method under track/road - The price shall cover for supply of HDPE (High Density Polyethylene) pipe of 110 mm nominal diameter as per IS 4984-1995 of make Tijaria/Himalyan/Koncept/Poddar/Unique/Dutron/Reliance/Baba/Shivam with accessories required for laying such as coupler, bend etc. as per description given in Annexure-XXI of tender document. The price shall also cover for laying the HDPE pipes in the ground below the tracks/road by push through method at a depth below the formation level as indicated in the drawing supplied by railway. The term "formation" level means the earth surface just below the bedding of the ballast. In case of any hard/stony soil, contractor should adopt new technology method in push through method. Each length of the pipes shall be joined together properly using proper size of socket and aligned in a straight line, keeping an inclination to facilitate the draining of water. | — | — | — | 4,53,600 | |
| — | 500.00 | — | — | ||
| Laying of cable in trench - The price shall cover for laying, testing and commissioning of LTUG armoured cable in existing trench/pipe and its connection at both ends. The cable shall be tested with 500 Volt Megger earth tester before laying it in the trench. The cable cores shall be tested for continuity, absence of cross phasing, Insulation Resistance between conductors to earth/armour and between conductors. The results should be recorded in presence of railways' representative. A composite cable layout plan on ferro-print or computerized print duly laminated in A-4 size should be submitted by the contractor to this office as well as site in-charge after laying of cable. Cables shall be supplied by railways at site engineer's stores. | — | — | — | 10,500 | |
| — | 2000.00 | — | — | ||
| Laying of cable on wall/cover shed/existing tray with MS clamp - The price shall cover for laying, testing and commissioning of LTUG armoured cable on wall/cover shed/in existing tray and its connection at both ends. The cable shall be tested with 500 Volt Megger before laying it in the tray. The cable cores shall be tested for continuity, absence of cross phasing, Insulation Resistance between conductors to earth/armour and between conductors. The results should be recorded in presence of railways' representative. A composite cable layout plan on ferro-print or computerized print duly laminated in A-4 size should be submitted by the contractor to site engineer and Divisional Office after laying of cable. | — | — | — | 66,000 | |
| — | 100.00 | — | — | ||
| Supply, fixing and commissioning of GRP/FRP cable tray of size 300 x 100 mm and 4.0 mm thick - The price shall cover for supply, fixing and commissioning of FRP cable tray of size 300 x 100 x 100 mm and 4.0 mm thick. The scope of work is as under -1. Supply and fixing GRP/FRP tray made of composite material of size 300 mm (W) x 100 mm (D) x 4 mm (Thick) complete with all accessories, support arrangements, hardware, fittings etc as per site requirement. This item shall be utilized for housing of bus duct trunking system.2. GRP/FRP material shall have minimum 60% glass content, with properties of anti-corrosiveness, dust-proof, rust-proof, shock-proof, high-strength, weather proof, fire retardant, non- conductive, non-magnetic and maintenance free.3. The trays should be single section pultruded, (assembled trays will not be accepted).4. Trays shall be complete with all fixing accessories, suitable to accommodate the bus duct system. Complete design, items, accessories etc shall be as per site conditions requirement duly certified by the site-engineer.5. Trays shall be channel/trough type and furnished as a system including all necessary fasteners, hold-down clips, support systems, covers, hinged horizontal and vertical splice plates, elbows, reducers, bends, tees, crosses etc and all necessary hardware etc.6. Trays shall be erected in perfect level and plumb.7. Trays shall not have sharp edges, burrs or projections injurious to the system.8. Trays shall include fittings such as inward/outward bends, inward/outward risers, tees, reducers/expanders, crosses, Pultruded coupler plates with SS: 304 or SS: 316 hardware, horizontal and vertical moulded hinges for flexible angle bend etc. for changes in direction and elevation.9. Trays shall have support span of 1.5 to 2.0 meter supported adequately at a minimum distance of 1.0 meter from the building structure by means of painted/ galvanized MS structural members secured to the structure by dash fasteners or by grouting.10. The entire tray system shall be rigid.11. Bus duct should be suitably supported/fixed with galvanized clamps / nut bolts etc.12. The contractor shall submit delivery challan/copy of original voucher of OEM/authorized dealer to ascertain originality of the items. | — | — | — | 63,700 | |
| — | 2000.00 | — | — | ||
| Providing M.S. supports fabricated from 100 mm x 50 mm size C type MS channel and 50 x 50 x 5 mm size M.S. angle for supporting FRP cable tray - The price shall cover for providing M.S. supports fabricated from 100 mm x 50 mm size C type MS channel and 50 x 50 x 5 mm size M.S. angle for supporting FRP ladder type cable tray. The M.S. Channel shall be welded to the shed pillars and cross supports of M.S. angles shall be provided for laying of FRP cable tray. The cable tray shall be fixed by means of GI nuts, bolts and washers in a safe and secure manner. Provision of suitable size of holes shall be made in channels/angles for supporting the cable tray. The M.S. channels and angles shall be painted with two coats of red oxide primer and finished with two coats of enamel paint of shade as decided by site engineer. | — | — | — | 2,00,000 | |
| — | 600.00 | — | — | ||
| Supply, fixing, testing and commissioning of bus duct trunking system of three-phase, four-wire, 40 Amp capacity, (4 + 2 conductors), IP: 55 protection with center/end feed unit with MCB, straight lengths 3.0 meters with three outlets, ceiling bracket holder, suspension clamp, wall bracket, suspension hook, snap clamp etc - The price shall cover for supply of material, installation, testing and commissioning of bus duct trunking system of 40 Amp (4 + 2 conductors), three-phase, four-wire, IP: 55 rated with center/end feed unit as per requirement with MCB, straight lengths 3.0 meters with three outlets on both side, end covers, T-joints, bends, couplings, required as per site conditions, ceiling bracket holder, suspension clamp, wall bracket, suspension hook, snap clamp etc. All suspension accessories shall be either galvanized or powder coated. The detailed technical specifications are given in Annexure-XXI of tender document. | — | — | — | 20,88,000 | |
| — | 510.00 | — | — | ||
| Supply, fixing, testing and commissioning of plug in box/tap off box of bus duct trunking system to light/fan points with three-core, 1.0 sq. mm connecting wire in PVC conduit to complete the wiring connection including all material required for fixing arrangement - The price shall cover for supply of material, installation, testing and commissioning of plug in box of bus duct trunking system. 10/16 Amp universal tap-off box / plug-in box of heavy duty PVC material with covers, two-pole selection plugs suitable for 10/16 Amp glass fuse, connectors etc. It shall be complete with wiring from plug-in box to light/fan points with up to 3.0 meter length 2 x 1.0 sq. mm FRLS PVC insulated wire with earth wire of 1.0 sq. mm in surface PVC conduit with joints/bends as required to complete the wiring connection including all material required for fixing arrangement. The PVC conduit/flexible conduit shall run aesthetically. Plug-in box shall be of same make as that of the OEM of the bus duct system. | — | — | — | 3,26,400 | |
| — | 24.00 | — | — | ||
| Supply, fixing, testing and commissioning of flexible bend of three-phase, four-wire, 40 Amp capacity, (4+2 conductors), IP: 55 protection for bus duct trunking system including all necessary components for connecting two ends of bus trunking - The price shall cover for supply of all material, installation, testing and commissioning of flexible bends of 40 Amp (4 + 2 conductors) for bus duct trunking system of three-phase, four-wire, IP: 55 rated. Flexible bend conductor of minimum 5.0 meter length shall be made of braided copper wire and the connection section with excellent electrical contact property. Flexible bend shall be of same make as that of the OEM of the bus duct system. | — | — | — | 2,78,400 | |
| — | 10.00 | — | — | ||
| Supply and providing rubber mat of size 2.0 x 1.0 meter and 2.5/3.0 mm thick - The price shall cover for supply and provision of ISI marked, rubber mat of size 2.0 x 1.0 meter and 2.5/3.0 mm thick Made of Dielectric "Elastomer" rubber and Synthetic Polymer as per IS: 15652-2006 (latest) of size 2.0 x 1.0 meter and 2.5/3.0 mm thick in HT/LT panel room for electrical insulation above the ground. The rubber mat shall be got approved by site engineer before supply. | — | — | — | 9,110 | |
| — | 600.00 | — | — | ||
| Providing G.I. Earth Wire, 8 SWG in PVC sleeve along with cable - The price shall cover for supply and laying of soft G.I. wire of 8 SWG covered with black coloured PVC sleeve of superior quality and laid along with PVC LTUG cable properly fixed and connecting earthing terminals of each panel. | — | — | — | 13,200 | |
| — | 20.00 | — | — | ||
| Providing maintenance free earthing - The price shall cover for providing maintenance free earthing as per the following specifications - 1. High tensile-low carbon steel rod having diameter not less than 17 mm complying with requirements of BS 4360 Grade 43A or EN10025:2-004 S275JR, molecularly bonded by 99.99% pure high conductivity copper on outer surface with copper coating thickness of 250 micron or more, Length 3000 mm (minimum). Certificates from NABL approved labs shall be submitted with test results.2. Copper earth bus-bar of size 250 mm x 50 mm x 6 mm having electrical conductivity of 101% IACS, minimum 99.9% copper content shall be exothermically welded to rod with 4 holes of 12 mm diameter (two on each side) for connecting earthing conductor.3. Earth Enhancement compound should have characteristics as mentioned in the RDSO specifications. It should have low resistivity preferably below 0.2 Ohm-meter, supplied in sealed bags (minimum 75 kg per pit for 5' x 5' x 10' size pit and minimum 50 kg per pit for 300 mm bore type pit. The bags shall be marked with manufacturer's name or trade name, quality, Batch No. and date of manufacture. Certificates from NABL approved labs shall be submitted with test results, for at least following parameters - i) Composition of Earth Enhancement compoundii) Resistivity - < 2 Ohm-meteriii) pH value - > 7 but < 9iv) Moisture retaining capacity - > 10% at 105 degrees Celsiusv) Water solubility - < 5%4. Backfill material - Good quality soil or excavated soil free from sand, gravel and stones shall be used for backfilling.5. Earth pit of size 5 feet x 5 feet x 10 feet or min 300 mm bore up to 10 feet using earth auger shall be made.6. Inspection chamber - A concrete box of 300 x 300 x 300 mm (inside dimensions) and 50 mm thickness of wall, with smooth cement plaster finish shall be provided on the top of the pit. A concrete lid, painted black, approximately 50 mm thick with pulling hooks shall be provided to cover the earth pit. PVC sleeve shall be provided in concrete wall to take out earthing connections.7. On backside of the cover, date of the testing and average resistance value shall be written with yellow paint on black background.8. Instead of copper bus- bar and strips mentioned in the drawing, a GI main bus-bar of minimum size 300 mm x 75 mm x 8 mm to be installed on nearby wall etc. It shall be connected to earthing with two GI strips of 50 mm x 6 mm size each, up to a distance of 10 meters from earth bus-bar (minimum 3 meters x 2 Nos GI strips to be supplied).9. Earthing shall generally be carried out in accordance with the requirement of I.E. Rules, 1956, as amended from time to time and shall confirm to IS: 3043 of 1987 with latest amendment. 10. The earth value shall be measured and recorded at the site by painting on earth pit or nearest wall along with date of testing. It shall be less than 2 Ohms and neutral to earth voltage shall be less than 3 Volt.11. Earthing performance after a year of installation shall be jointly checked and measured. It should be less than 2 Ohm.12. General arrangement of the earth system shall be as per the drawing given in Annexure-XXI of tender document. | — | — | — | 2,11,880 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TechSpecsofEnergyEfficientLEDBasedLuminaire.pdf
ATTACHMENT
RailwayBoardsletterNo.2018_CE-I_CT_9dated04.06.18.pdf
ATTACHMENT
WesternRailwaysSpecificationsforACBLTPanelsMCCBandMCB.pdf
ATTACHMENT
2024_06_03InstructionforincorporatingtheJPOCircularetc_ProvisionsintheTenderDocumentforallworksrequiringdiggingworksclosetoRly1.pdf for cable
ATTACHMENT
BankGuaranteeverification.pdf
ATTACHMENT
TenderDocument-BRC-EL-P-20-2550-26-27NEWGCC.pdf
ATTACHMENT
2024_06_03InstructionforincorporatingtheJPOCircularetc_ProvisionsintheTenderDocumentforallworksrequiringdiggingworksclosetoRly1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].