Providing Necessary Repair and Maintenance work in Block No. 5, New Sachivalay, Gandhinagar.

MEMORANDUM SHOWING THE ITEMS OF WORKS TO BE CARRIED OUT

QUANTITIES ESTIMATED RATES UNIT TOTAL AMOUNT

QUANTITIES ESTIMATED RATES UNIT TOTAL AMOUNT

IT. ESTIMATED BUT ACCORDING TO

NO. MAY BE MORE OR ESTIMATED

LESS IN FIGURE QUANTITIES

Item No.-1-Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

Rupees One Hundred Ninety Seven

1 32.00 chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within 197.09 Each Rs.

and Nine Paisas Only

all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Item No.-2-Scraping oil paint from steel and other metal surface and making the surface even Rupees Fifty One and Seventy Eight

(with Hand Scraping.) Paisas Only

Item No.-3-Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

3 150.00 50.11 Rupees Fifty and Eleven Paisas Only Smt Rs.

materilas and disposal of unserviceable materials with all lead and lift.

Item No.-4-Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, Rupees Four Hundred Twenty Five

flushing tank etc. including stacking the materials with all lead and lift. and Ninety Three Paisas Only

Item No.-5-Removing and scraping of old deteriorated plaster of any thickness from wall /

Rupees Twenty and Fifty Five Paisas

5 80.00 R.C.C member including stacking of serviceable material and disposal of unserviceable from 20.55 Smt Rs.

site of work with all lead and lift

Item No.-6-Dismentaling of sheet roofing, cement sheet, partattion, gypsum sheet including

ridges, Hips, Valleys, Gutters and all framing andmembers etc. stacking of serviceable Rupees Fifty Six and Seventy Nine

materilas and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet Paisas Only

roofing/cement sheet/ gypsum sheet/ Partation.

Item No.-7-Demolition of Brick work and stone masonry including stacking of serviceable Rupees Five Hundred Seventy Seven

materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. and Ninety Two Paisas Only

Item No.-8-Excavation for foundation upto 1.5 m depth including sorting out and stacking

Rupees Two Hundred Twelve and

8 5.00 of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or 212.52 Cmt Rs.

Fifty Two Paisas Only

Item No.-9-Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded Rupees Three Thousand Seven

9 20.00 stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 3758.19 Hundred Fifty Eight and Nineteen Cmt Rs.

Foundation and Plinth Paisas Only

Item No.-10-Brick work using common burnt clay building bricks having crushing strength not Rupees Four Thousand Six Hundred

10 5.00 less than 35 kg./Sq.Cm. in foundation and plinth or superstructure at any height in Cement 4671.28 Seventy One and Twenty Eight Paisas Cmt Rs.

Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional Only

Item No.-11-Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

Rupees Two Hundred Eighty Three

11 25.00 single or half brick walls for interior plastering at any height and finished even and smooth in 283.66 Smt Rs.

and Sixty Six Paisas Only

(ii) Cement mortar 1:3 (1-cement:3-sand)

Item No.-12-Providing 20mm thick cement plaster in single coat on single or half brick walls for

Rupees Two Hundred Fifty Eight and

12 30.00 interior plastering at any height and finished even and smooth in (ii) Cement mortar 1:4 (1- 258.78 Smt Rs.

Seventy Eight Paisas Only

cement :4-sand)

Item No.-13-Providing 10mm thick cement plaster in single coat on brick/concrete walls for

Rupees Two Hundred Twenty Six and

13 30.00 interior plastering at any height and finished even and smooth in (ii) Cement mortar 1:4 (1- 226.17 Sq.M Rs.

Seventeen Paisas Only

cement :4-sand)

Item No.-14-Repair of Concrete : Step 1 : Remove all loose concrete with chisel and make the

depth of repair uniform , Step2 : Clean the reinforcement with wire brush and rust remover

Rebakleen to remove all loose rust and apply one coat Zinc rich primer (Master Emaco P130).

Step 3: Applying Polymer modified mortar of average 25mm thickness using 1 part cement 3 Rupees Six Hundred Eighty Two and

part sand and 5.0 Littre Master Emaco SBR 2 of BASF mixed per 50kg cement to the chipped Seventy Eight Paisas Only

concrete by trowelling using steel trowel complete. Step 4 : Apply one coat of water based

concrete curing compound (FOSROC make Concure WB) inclusive of Manpower, Material and

Equipment.work complete as per the instuction of EIC/Client/Architect. (At All Floor)

Item No.-15-Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and

Rupees One Thousand One Hundred

15 50.00 dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white 1114.09 Smt Rs.

Fourteen and Nine Paisas Only

Item No.-16-Providing and laying coloured glazed tiles 8 to 10mm thick of approved size in

Rupees One Thousand Five Hundred

16 50.00 skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse 1513.28 Smt Rs.

Thirteen and Twenty Eight Paisas Only

sand) & jointed with white cement slurry.

Item No.-17-Dado Work : Providing and laying Matt /Glossy/ Non skid,/Rustic finish Double

Charged Vitrified tiles in dado using minimum 10 mm to 12mm thick of approved size tiles

design approved by architect /client fixed in dado on 10 mm th. Cement plaster 1:3 (1 cement:

3 coarse sand) All surfaces must be dimensionally stable , level, cured, undamaged, tiles fixed

Rupees Two Thousand Seventy Nine

17 100.00 by approved tile adhesive and all application shall be done under instruction of manufacturer 2079.01 Sq.M Rs.

and One Paisas Only

guideline and specification , in proper line and level as per detailed drawing / instruction all

complete as per approved sample by Architect, drawings and instruction of EIC. at all floors /

all levels / all heights and all shapes . (Make : Kajaria, somani, Varmora, Bell, Johnson,

Daxinamurti as approved by Engineer In Charge).

Item No.-18-Vitrified Flooring : Providing and laying Lapato / Glossy/Matt/Rustic finish

Double charged antiskid Vitrified tiles flooring using minimum 10 mm to 12mm thick tiles

as per approved make list or selected by Architect ,as approved tile size including preparing

base for leveling with 20mm thick cement mortar 1:6 (1 cement : 6 coarse sand ) and in Rupees One Thousand Nine Hundred

proper line and level as per detailed drawing / instruction and approval by architect.The rate Sixty and Thirty One Paisas Only

shall be inclusive of protecting the flooring by plaster of Paris and plastic and/or bubble top

sheets. (At all floor area). (Make : Kajaria, somani, Varmora, Bell, Johnson, Daxinamurti as

approved by Engineer In Charge).

Item No.-19-Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

Rupees One Thousand One Hundred

19 50.00 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) 1120.36 Sq.M Rs.

Twenty and Thirty Six Paisas Only

finishing with flush pointing in white cement.

Item No.-20-Providing, applying and jointing with 3mm to 5mm thick laticrete/Roff grouting in

20 300.00 tiles border of approved shade and colour in proper line and level as per detailed drawing / 202 Rupees Two Hundred Two Only Rmt Rs.

instruction and approval by architect. Including cutting of exising tile joint accordilngly.

Item No.-21-Providing and laying polished granite stone slab 18 mm thick in risers of steps,

dedo and pllars laid on 10 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed Rupees Three Thousand One

with gray cement slurry including rubbing, moulding & polishing as per instruction by EIC etc. Hundred and Eighty Six Paisas Only

Item No.-22-Provide and laying rough chiseled dressed stone flooring over 20mm average thick

base of cementmortar1:5(1-Cement:5-coarsesand)or L.M. 1:1.5 (1-Lime putty : 1.5 - coarse Rupees Five Hundred Seventy Six and

sand) including pointing with cement mortar 1:2 (1cement : 2-stone dust) etc.complete. (A) Seventy Nine Paisas Only

Item No.-23-Applying two coats of putty & two coats of primer of approved brand and

Rupees Forty and Fifty Nine Paisas

23 500.00 manufacture on new wall surface to give an even shade including thoroughly brushing the 40.59 Smt Rs.

surface free from mortar dropping and other foreign matterand sand papered smooth.

Item No.-24-Wall paintings (two coat) with plastic emulsion paint of approved brand and

Rupees Eighty Three and Eighteen

24 1,500.00 manufacture on under coated wall surface to give an even shade incl. thoroughly brushing the 83.18 Smt Rs.

surface free from mortar droppings and other foreign matter and sand papered smooth.

Item No.-25-Wall paintings (two coat) with plastic emulsion paint of Asian Royal -

Laxury/shine/matt as approved by Architect/EIC of appeoved shed on under coated wall Rupees One Hundred Eighty and

surface to give an even shade incl. thoroughly brushing the surface free from mortar droppings Eighty Seven Paisas Only

and other foreign matter and sand papered smooth.

Item No.-26-Providing P.O.P. Punning upto 5 mm thick incl. leveling in line & level etc. Rupees Four Hundred Forty Three

complete. and Fifty Four Paisas Only

Item No.-27-Finishing wall with weather proof exterior emulsion paint (Asian or equivelent) on

Rupees One Hundred Twenty and

27 300.00 wall surface (two coats) to give an required shape even shade after thoroughly brushing the 120.26 Smt Rs.

Twenty Six Paisas Only

surface to remove all dirt, and remains of loose powdered materials.etc complete

Item No.-28-Painting Two coats (excluding priming coat) on previously painted wood and wood

Rupees One Hundred Thirteen and

28 30.00 based surface with enamel paint, to give an even shade including cleaning the of all dirt, dust 113.43 Smt Rs.

Forty Three Paisas Only

and other foreign matter.

Item No.-29-Painting Two coats (excluding priming coat) on previously painted steel and other

Rupees One Hundred Eleven and

29 30.00 metal surface with enamel paint, brushing to give an even shade including cleaning the surface 111.09 Smt Rs.

Nine Paisas Only

of all dirt, dust and other foreign matter.

Item No.-30-Polishing with french polish on previously polished wood and wood based surface

Rupees Seventy One and Eighty Three

30 15.00 to give an even surface including cleaning, the surface of all dirt, dust and sand papered 71.83 Smt Rs.

smooth and including a coat of wood filler.

Item No.-31-Polishing with french polish on new wood and wood based surface to give an even

Rupees One Hundred Thirty Nine and

31 15.00 surface including cleaning, the surface of all dirt, dust and sand papered smooth and including 139.63 Smt Rs.

Sixty Three Paisas Only

a coat of wood filler.

Item No.-32-Applying general insecticide pest control treatment to floors, cupboards etc

including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( Rupees Ninety One and Sixty Three

(0.075% concentration by mass) is recommended 10.5ml chemical diluted with 5 liters of water Paisas Only

application 0.5 litre chemical /Sqm of surface is recommended as per I.S.

Item No.-33-Scaffolding with steel H frame with proper bracing and struts with shoring and all

33 1,000.00 other required arrangement etc. complete for up to 40 meter Height for the items specified in 202 Rupees Two Hundred Two Only Smt Rs.

the following estimate where and whenever required untill the completion of the work.

Item No.-34-Providing and fixing Roller blind Polyester curtain with superior quality Acmeda Rupees Two Thousand Six Hundred

34 50.00 Mechanism including all necessaries fitting like breaket chain etc. complete as per instruciton 2697.87 Ninety Seven and Eighty Seven Paisas Smt Rs.

of Engineer in charge. Only

Item No.-35-Providing & fixing sun controlled / frosted film including using approved brand Rupees Five Hundred Thirty Seven

sun control film including glass cleaning with chemical etc. complete. and Thirty Nine Paisas Only

Item No.-36-Providing & fixing 25 to 30mm thick commercial Flush door shutter with Sheet

Glass with frosted film. The flush door shall be finished with 1 mm thk laminate on both sides

(Laminate to be approved by architect before commencement of work) rate shall be including

providing & fixing 30x12 mm thk Teak wood lipping / bedding all around finish with approved Rupees Two Thousand Four Hundred

melemine poilish matching to the laminate, Rate shall including providing all necessary Twenty Six and Fifty Four Paisas Only

consumables viz. adhesive, necessary hardware,hinges, door stopper, Handle, necessary beads

moulding, lipping,fastenings completed at all floors & heights as per architectural drawings

and instructions. sample mock shall be approved from Architect/EIC.

Item No.-37-Providing & fixing 25 to 30mm thick Factory made commercial Flush door shutter.

The flush door shall be finished with 1 mm thk laminate on both sides (Laminate to be

approved by architect before commencement of work) rate shall be including providing & fixing

Rupees Two Thousand Four Hundred

30x12 mm thk Teak wood lipping / bedding all around finish with approved melemine poilish

37 50.00 2498.29 Ninety Eight and Twenty Nine Paisas Smt Rs.

matching to the laminate, Rate shall including providing all necessary consumables viz.

adhesive, necessary hardware,hinges, door stopper, Handle, necessary beads moulding,

lipping,fastenings completed at all floors & heights as per architectural drawings and

instructions. sample mock shall be approved from Architect/EIC.

Item No.-38-Providing and fixing Aluminum Door made from aluminium section of Frame size

86 x 49 x3 mm @ 2.043 kg/Rmt and shutter member of size 44.45 x 25 x 2.40 mm @

Rupees Four Thousand Five Hundred

38 20.00 Kg/Rmt powder coated or anodized as per requirement and PVC bakelite sheet of 3mm to 4mm 4580.35 Smt Rs.

Eighty and Thirty Five Paisas Only

thick of approved quality shall be fixed with it with all necessary accories, aldrop, tadi,

gassket,SS hinge, handle, stopper etc complete.

Item No.-39-Providing and fixing PVC Solid shutter Door of 25 to 30mm thick, the texture,

design and colour shall be approved by EIC or Architect. The rate shall be including providing Rupees Four Thousand Seven

39 50.00 and fixing shutter with S.S. handle, Aldrop, Stopper, door stoper Hinges with nacessary tools 4750.81 Hundred Fifty and Eighty One Paisas Smt Rs.

and hardware including cutting, fixing, placing etc complete as per directed by Engineer In Only

Item No.-40-Providing and fixing WPC Frame of size 100 x 65mm for door including cutting, Rupees Nine Hundred Forty Four and

placing, fixing etc complete. The sample shall be approved by EIC or Architect. Nineteen Paisas Only

Item No.-41-Providing wood work in frames of Doors, windows cleare story windows and Rupees Sixty One Thousand Twenty

othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood Three and Nineteen Paisas Only

Item No.-42-Providing and fixing Laminated Plywood single sheet partition full or low with

whole frame structure of Aluminium extruded alloy sections with all Anodized or powder coated

Rupees Two Thousand Two Hundred

42 40.00 as per requirement sections having with no screwing or gluing etc. visible. Panels should be 2255.35 Smt Rs.

Fifty Five and Thirty Five Paisas Only

18mm thick plywood with 1mm thick laminate sheet both side as per approved list & selection

from Architech office.

Item No.-43-Providing and fixing Double skin laminated Plywood sheet partition full or low with

whole frame structure of Aluminium extruded alloy sections with all Anodized sections having Rupees Three Thousand One

43 30.00 overall partition thickness 88 to 90 mm (double skin) flush on both sides, with no screwing or 3187.17 Hundred Eighty Seven and Seventeen Smt Rs.

gluing etc. visible. Panels should be 12mm thick plywood with 1mm thick laminate sheet both Paisas Only

side as per approved list & selection from Architech office.

Item No.-44-Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size

Rupees One Thousand Seven

61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal

44 50.00 1713.7 Hundred Thirteen and Seventy Paisas Smt Rs.

member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc complete for window

Item No.-45-Providing and fixing standared extruded of alluminium section of size 63.50 x Rupees One Thousand Three

45 30.00 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm 1301.82 Hundred One and Eighty Two Paisas Smt Rs.

thick transparent bronze colour tinted float glass as details etc complete for Fix window. Only

Item No.-46-Providing and fixing standared extruded of alluminium section of size 63mm x

Rupees One Thousand One Hundred

46 60.00 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation 1175.56 Smt Rs.

Seventy Five and Fifty Six Paisas Only

with 5 mm thick frosted glass as details etc complete for Ventilation.

Item No.-47-Providing and fixing sheet glass, selected quality (Type-C) bedded in putty and

Rupees One Thousand One Hundred

47 25.00 fixed with wooden beading including the cost of wooden beadings of first class teakwood and 1195.64 Smt Rs.

Ninety Five and Sixty Four Paisas Only

necessary cutting of glass. (1) 5 mm thick.

Rupees Two Thousand Three

Item No.-48-Providing and fixing 5mm thick mirror of superior glass fixing with S.S. screws

48 50.00 2356.03 Hundred Fifty Six and Three Paisas Smt Rs.

glass holder as directed by Engineer In Charge.

Item No.-49-Providing and fixing single layer waterproof gypusm board upto 12.5 mm thick

sections using waterproof board of size 1220 mm x 1830 mm x 8.0 mm suspended by G.I

suapender of size 25 mm x 3 mm with intermediate channel of size 18 mm x 40 mm x 0.80 mm

at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm Rupees Six Hundred Six and Ninety

center to center and perimetre chanel A of size 20 mm x 27 mm x 30 mm x 0.50 mm at edges & Five Paisas Only

drops including paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat joining

compound top coat on ceiling including making necessary opening for light fitting, diffuser etc.

complete as per detail drawing as directed.

Item No.-50-Providing and fixing PVC printed false ceiling with flush type with alluminium

frame, frame work is done with three different sections of G.I. sheet of 24 gauge thickness

named as C, U and L. The C section is fixed with hangers at an equal distance of 36” each and

then U section is fixed perpendicular on C section with steel screws at and equal distance of

16” each. The complete frame work is supported by G.I. L angle/6 mm rod hangers from the

Rupees Nine Hundred Eleven and

50 20.00 roof and L sections is fixed all around the wall as shown in the diagram. 5mm PVC sheet strips 911.02 Smt Rs.

Two Paisas Only

of size 2 wide are fixd with counter sunk steel screws on the U section. Further 3mm PVC sheet

is stuck to these PVC strips with solvent cement such that joining lines are perfectly matched.

P.U. putty is filled, dried and leveled and requisite coats of primer and paint is done on the

ceiling for getting fine surface finish etc. complete as per direction of Engineering and charge

manufacturer’s specification and drawing

Item No.-51-Providing and fixing single layer Cement Sheet 6 mm thick channel of size 40 mm

x 35 mm x 0.55 mm at 0.6 m center to center including paper tap sand sofit cleat, anchor Rupees Seven Hundred Sixty Two and

fastener, scoch bolt connecting cleat joining compound top coat on wall etc. complete as per Five Paisas Only

detail drawing as directed..

Item No.-52-Provide and fixing Revolving Chair Castor Wheel of premium qyality and shall be Rupees Two Hundred Fifty Five and

confirmed and fixed as per directed by Engineer In Charge. Three Paisas Only

Item No.-53-Providing and fixing of table glass of 5 mm on table top including grounding etc. Rupees Two Hundred Eighty Four

complete. and Sixty One Paisas Only

Item No.-54-Providing and fixing SS Name Plates with computerized printing of any size Rupees Twelve Thousand Four

54 30.00 madeup from S.S. Grade 304 having thickness upto 2mm with edge smoothening having S.S. 12485.01 Hundred Eighty Five and One Paisas Smt Rs.

Flat button head cap screw at edges/corner as ditectwed by Engineer In Charge. Only

Item No.-55-Providing and fixing SS Name Plates 304 grade upto 2mm thick with edge

Rupees Nineteen Thousand One

smoothening with computerized printing having S.S. Flat button head cap screw ar

55 15.00 19151.22 Hundred Fifty One and Twenty Two Smt Rs.

edges/corner with Wooden base made up of 12mm thick Playwood sheet covered with veener

sheet as directed by EIC having batten border with melemine polish finish of any size.

Item No.-56-Charges for Computerized Printing of approved size on Name Plate as per directed Rupees Two Hundred Fifty Two and

by Engineer In Charge for Chember Enterance Plate. Fifty Paisas Only

Item No.-57-Charges for Computerized Printing of approved on Name Plate as per directed by

57 45.00 303 Rupees Three Hundred Three Only No Rs.

Engineer In Charge for Floor Enterance Plate.

Item No.-58-Charges for Computerized Printing of approved on Name Plate as per directed by Rupees Two Hundred Fifty Two and

Engineer In Charge for Block Enterance Plate. Fifty Paisas Only

Item No.-59-Painting and lettering with enamale paint three coats ect comp. Name plate, floor Rupees Sixty Six and Thirty One

plate etc complete Paisas Only

60 20.00 Item No.-60-P&F Glass Shelf 505 Rupees Five Hundred Five Only No Rs.

Item No.-61-Providing and fixing in position in true line and level Door closers Mark, Godrej,

Everite Prabhat or Equivalent. including all required consumables, necessary screws etc Rupees Six Hundred Seventy Four

complete as per archtiectural drawings and instructions, sample shall be approved from and Ninety Five Paisas Only

architect / Engineer in charge.

Item No.-62-Providing and fixing Godrej, Shakti Floor Spring or equivalent sample shall be Rupees Two Thousand Six Hundred

approved from architect / Engineer in charge. Thirteen and Sixty Seven Paisas Only

Item No.-63-Providing fitting kich make mortise handle as per existing handle. (Godrej Make or Rupees One Thousand One Hundred

equivalent) Three and Forty Three Paisas Only

Rupees One Thousand One Hundred

64 25.00 Item No.-64-Providing & Fixing of Mortice Lock 1161.5 No Rs.

Sixty One and Fifty Paisas Only

Rupees One Thousand Four Hundred

65 25.00 Item No.-65-Providing & Fixing of Supreme Lock or equivalent 1451.88 No Rs.

Fifty One and Eighty Eight Paisas Only

Rupees Two Hundred Forty One and

66 10.00 Item No.-66-Supplying of 2" thick Inter Lock [Kadaka lock] 241.16 No Rs.

Sixteen Paisas Only

Item No.-67-Providing and Fixing metallic cup board or wardrobe locks of sizes with necessary

67 20.00 60.8 Rupees Sixty and Eighty Paisas Only No Rs.

screws etc. complete

Item No.-68-Providing and fixing road mechanism for curtain made from ABS Plastic with Rupees Seven Hundred Twenty Five

chain and Ninety Four Paisas Only

Rupees Five Hundred Fifty One and

69 15.00 Item No.-69-Providing and fixing 10" long SS Aldrop for door shutter etc. 551.71 No Rs.

Seventy One Paisas Only

Rupees One Hundred Ninety Six and

70 40.00 Item No.-70-Supplying Alluminium section any size, powder coated 196.86 Kg Rs.

Eighty Six Paisas Only

Rupees Thirty Four and Forty Five

71 40.00 Item No.-71-Supply of Alluminium section any size, anodized 34.45 Kg Rs.

Rupees Eighty Seven and Sixty Paisas

72 25.00 Item No.-72-Supply of S.S. Handle for Door 15 Cm size of ASIS 304 Grade 87.6 No. Rs.

73 25.00 Item No.-73-Supply of S.S. Handle for door/ window 10 Cm size of ASIS 304 grade 63 Rupees Sixty Three Only No. Rs.

Rupees One Thousand Four and

74 25.00 Item No.-74-Supply of S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 1004.01 No. Rs.

One Paisas Only

Rupees Twenty Eight and Fifty Five

75 25.00 Item No.-75-Supply of Hinges (Strap) M.S. 10 cms. Length or equivalent 28.55 Pair Rs.

Rupees One Hundred Twenty Three

76 25.00 Item No.-76-Supply of Hinges Steel 7.5 cms. Length or equivalent 123.04 Each Rs.

and Four Paisas Only

Rupees Three Hundred Seventy Seven

77 30.00 Item No.-77-Supply of S.S. Aldrop 25 Cm long of ASIS 304 Grade 377 No Rs.

Rupees One Hundred Seventy Six and

78 25.00 Item No.-78-Supply of Drawer Lock 176.75 No Rs.

Seventy Five Paisas Only

Item No.-79-Supply Latch (Tadi) as per sample approved sectional flats (Heavy) Rupees Fifty Three and Fifteen Paisas

Alluminium 25 cms length & 16mm dia Only

80 30.00 Item No.-80-Supply of Door Stop heavy duty 101 Rupees One Hundred One Only No Rs.

Rupees Four Hundred Eighteen and

81 25.00 Item No.-81-Supply of stopper-60 mm long 418.34 No Rs.

Thirty Four Paisas Only

Rupees Three Hundred Fifty Five and

82 20.00 Item No.-82-Supply of Commercial Plywood Sheet 12 mm 355.34 Smt Rs.

Thirty Four Paisas Only

Item No.-83-Supply of Handle for doors Windows Cupboards etc. C.P. Brass or Aluminium 15 Rupees Fifty One and Nineteen Paisas

cms. Length Only

Rupees Seventy Five and Seventy Five

84 30.00 Item No.-84-Supply of Pavanakandi - Adjuster for window 75.75 No Rs.

85 50.00 Item No.-85-Supply of M-Seal (100gm) 60.6 Rupees Sixty and Sixty Paisas Only Pkt Rs.

Rupees Thirty One and Seventy Six

86 30.00 Item No.-86-Supply of White cement 31.76 Kg Rs.

Rupees Twenty Five and Twenty Five

87 20.00 Item No.-87-Supply of haxo-blade 25.25 No Rs.

88 25.00 Item No.-88-Supply og Mix Khili/screw - 200 gm 50.5 Rupees Fifty and Fifty Paisas Only Pkt Rs.

Rupees Two Hundred Four and Two

89 25.00 Item No.-89-Supplying of Silicone bottle of approved brand etc complete. 204.02 No Rs.

Item No.-90-Providing and fixing of 4mm thick and .25 micron coated ACP (Acrylic composit Rupees Two Thousand Six Hundred

90 10.00 pannel) with required nut, bolts, screw including removing of existing plywood, joints of acp 2617.29 Seventeen and Twenty Nine Paisas Smt Rs.

sheet fill with acp silicon including all transporation and taxes etc complete. Only

Item No.-91-Providing and Applying Exposed R.C.C. surface treatment (Luxter Plaster)with

decorative water repelent Plaster providing smooth or textured, mat or shining surface, high

quality appearance. The surace shall be cleaned , repair cracks with cement based putty or

Rupees Two Thousand One Hundred

91 50.00 mortar. After this apply cement primer for improve adhesion. The decorative plaster shall be 2116.16 Smt Rs.

Sixteen and Sixteen Paisas Only

applied in sequenc layer as per manufacturer's instruction. After this the finishing shall be

done for providing smooth ot textured, mat or shining surface as desired finish with necessary

tolls and equipment at any height with credle trolly and necessary equipments.

Item No.-92-Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

Rupees Seventy Two and Sixty Five

92 75.00 the wall with the help of clamp at every two metre C/C or shall be concealed as directed 72.65 Rmt Rs.

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item No.-93-Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

Rupees Ninety One and Eighty Four

93 75.00 the wall with the help of clamp at every two metre C/C or shall be concealed as directed 91.84 Rmt Rs.

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item No.-94-Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

Rupees One Hundred Forty Eight and

94 75.00 the wall with the help of clamp at every two metre C/C or shall be concealed as directed 148.12 Rmt Rs.

Twelve Paisas Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item No.-95-Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

Rupees One Hundred Ninety Five and

95 75.00 the wall with the help of clamp at every two metre C/C or shall be concealed as directed 195.67 Rmt Rs.

Sixty Seven Paisas Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item No.-96-Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special falnge Rupees Two Hundred Eighty and

compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(B) 75 Twenty Three Paisas Only

Item No.-97-Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special falnge Rupees Three Hundred Thirty Nine

compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(B) 110 and Five Paisas Only

Item No.-98-Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

Rupees Nine Hundred Eighty Two and

98 20.00 (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) 982.13 Each Rs.

Thirteen Paisas Only

Vitreous China.(I) Long pattern = White colour

Item No.-99-Providing and fixing wash down wall mounting EWC-P of approved shade,

conforming to Pattern 2 of IS: 2556 (Part -II), with SWR Self it Soil PVC pipe and plug bend as

per specifications; glazed vitreous / Colored European Water Closet with Cistern Dual Flush

Rupees Twenty Two Thousand Five

System (IS-2326), with grouting the CI chair inside the floor/wall, rubber gaskets, connecting

99 15.00 22514.99 Hundred Fourteen and Ninety Nine Each Rs.

PVC 110mm dia soil pipe with PVC coupling, nuts, mounting cistern on WC., and solid Varity

heavy duty plastic seat cover as per IS-2548, of approved make; cutting and making jari work

etc. complete.(Make : Jaquar, Hindware, Cera) [Including Seat cover / Outlet Gasket / Inlet

Item No.-100-Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. Rupees One Thousand Four Hundred

100 10.00 brackets painted white including sutting holes and making good the same but excluding 1484.89 Eighty Four and Eighty Nine Paisas Each Rs.

fittings. (A) Vitreous China:(ii) Flat Back washbasin 550 mm x 400mm size. (i) In white colour. Only

Item No.-101-Wash basin counter - Toilet / Wash Area (Counter width- 600mm ) : Providing

& fixing two layers of wash basin counter,first layer using 25mm thick Kotastone of approved

shade and second layer using approved shade and sample of Mirror finish Granite (Of Texture,

shed, Colour and pattern as approved by EIC ), joined together with 1:4 Cement mortar

Rupees Eight Thousand One

beding / approved tile adhesive , to true plane & level or to slopes,or close jointed with cement

101 10.00 8197.8 Hundred Ninety Seven and Eighty Smt Rs.

slurry with pigment of matching shade and colour and finishing with the same, including dedo

1'6" ht , cutting kotah & tile as per required shape & size to fit Wash basin,& 3" to 9" facia

with moulding, nosing, chamfered front edges, fixing, disposal of debris etc. finished as per

design in detail drawing and instruction of Architec/EIC.The sample mock shall be approved

from Architect/EIC.

Item No.-102-Providing and fixing glazed vitreous Wash Basin Round/Ovel/Rectangular Over-

Rupees Seven Thousand Six

Counter, of 400 to 600 mm dia./Size, with supporting in stone flooring, 1 no, Waste Pipe,1.2m

102 10.00 7665.9 Hundred Sixty Five and Ninety Paisas Each Rs.

Flexible Pipe [1No] and waste coupling. Colour/pattern should be approved by Architect or

Engineer Incharge Etc complete.[Jaquar, Hindware, Cera)

Rupees One Thousand Three

Item No.-103-Providing & fixing of brass health faucet chrome finish, with pvc Tube and

103 30.00 1335.73 Hundred Thirty Five and Seventy Three Nos Rs.

accessories with necessary fittings etc. complete. jaquar/Hindwarw/Cera make.

Item No.-104-Providing and fixing PVC low level flushing tank of make Cera Hindware paryware Rupees One Thousand Four Hundred

including necessary PVC connection and accessories etc. complete. Seventy Five and Eleven Paisas Only

Rupees Seven Hundred Fifty Four and

105 30.00 Item No.-105-Providing and Fixing European Type Sheet Cover 754.98 No Rs.

Ninety Eight Paisas Only

Item No.-106-Providing and fixing chromium plated, bottle trap with necessary couplings of Rupees Two Hundred Ninety Five and

approved quality for wash basin. Eighty Paisas Only

Rupees Four Thousand Eight

Item No.-107-Providing and fixing Metro Push flush Cock jacquare, hindware,cera or

107 10.00 4878.3 Hundred Seventy Eight and Thirty No Rs.

equivalent etc.

Item No.-108-Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i) Rupees One Hundred Thirty Two and

25mm dia. Eighty Nine Paisas Only

Item No.-109-Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white Rupees Two Thousand Three

109 5.00 including cutting holes in walls and making good the same but excluding fittings. (C) Vitreous 2326.66 Hundred Twenty Six and Sixty Six Each Rs.

China Sink.(i) 600mm x 450mm x 150mm size Paisas Only

Item No.-110-Providing and fixing pillar tap, capstan head, screw down high pressure with Rupees Three Hundred Eight and

screws, shanks and back nuts. (i)15mm dia. Seventy Three Paisas Only

Rupees One Thousand Seven

Item No.-111-Providing and fixing C.P. Pillar cock 15 mm dia. Heavy duty swan neck etc. of

111 25.00 1765.48 Hundred Sixty Five and Forty Eight No Rs.

make Jaquar, Essco, Hindware, cera, parryware etc. complete.

Item No.-112-Providing and fixing screw down bib taps of following size.(C)Gun metal screw Rupees One Hundred Fifty Eight and

down bib tap. (i) 15mm dia. Eighty Six Paisas Only

Rupees Two Hundred Five and

113 25.00 Item No.-113-Providing and fixing brass screw down stop/angle tap/cock.(A) 15mm dia. 205.83 No Rs.

Eighty Three Paisas Only

Item No.-114-Providing and fixing C.P. brass waste coupline for washbasin or sink. (A) Rupees Sixty Seven and Ninety One

32mmdia. Paisas Only

Item No.-115-Providing and fixing C.P. brass waste coupline for washbasin or sink. (A) Rupees Eighty Nine and Eighty Three

40mmdia. Paisas Only

Rupees One Thousand One Hundred

116 5.00 Item No.-116-Providing and fixing Zoloto Handle PVC Ball Valve - 25 mm dia. 1101.1 No Rs.

One and Ten Paisas Only

Rupees Two Thousand Five Hundred

117 5.00 Item No.-117-Providing and fixing Zoloto Handle PVC Ball Valve - 40 mm dia. 2597.11 No Rs.

Ninety Seven and Eleven Paisas Only

Rupees Four Thousand Four

118 3.00 Item No.-118-Providing and fixing Zoloto Handle PVC Ball Valve - 50 mm dia. 4404.41 Hundred Four and Forty One Paisas No Rs.

Rupees Six Hundred Thirty Four and

119 5.00 Item No.-119-Providing and fixing of Concealed cock 15 mm Heavy duty with cap 634.89 No Rs.

Eighty Nine Paisas Only

Item No.-120-Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

Rupees Five Hundred Ninety Nine and

120 5.00 with jali of the following nominal diameter of self cleansing design with C.I scread down or 599.64 Each Rs.

Sixty Four Paisas Only

hinged grating including the cost of cutting and making good the walls.

Rupees Eight Hundred Ninety Four

121 25.00 Item No.-121-Providing & Fixing Angle cock 15 mm make of hindware, cera, jaquar etc. 894.36 Each Rs.

and Thirty Six Paisas Only

122 401.00 Item No.-122-Providing and fixing Soap Dispenser 808 Rupees Eight Hundred Eight Only Each Rs.

Item No.-123-Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M.size having weight not Rupees Nine Hundred Fifty Eight and

less than 35Kg. Seventeen Paisas Only

Rupees Two Thousand Nine Hundred

Item No.-124-Providing and fixing C.I. Manhole cover 600 mm x 600 mm size with frame

124 3.00 2961.83 Sixty One and Eighty Three Paisas Each Rs.

having weight not less than 35Kg.

Item No.-125-Providing and fixing C.I. Manhole cover 750 mm x 750 mm size with frame Rupees Five Thousand Twenty Three

having weight not less than 50Kg. and Forty Nine Paisas Only

Rupees Eight Thousand Four

Item No.-126-Providing and fixing C.I. Manhole cover 1000 mm x 1000 mm size with frame

126 1.00 8403.45 Hundred Three and Forty Five Paisas Each Rs.

having weight not less than 80Kg.

Item No.-127-Providing & fixing white vitreous china flat back urinal of size below mentioned

size as per IS- 2556 (Part-2 ) with C.I. hangers and Push Cock, Waste Pipe and pipe to wall Rupees Seventeen Thousand Five

127 25.00 with C.P. flange complete including cutting and making good the walls and floors wherever 17559.56 Hundred Fifty Nine and Fifty Six Paisas Each Rs.

required.[Jaquar URS-WHT-13253N] [485x310x710]mm] [Waste Coupling :[Jaquar :ALD Only

709L130] and Push Cock [Jaquar PRS-CHR-077]. Make as per tender or equivalent

Rupees Sixty One and Two Paisas

128 25.00 Item No.-128-Supply of Waste Pipe for Wash basin C.P. 32 mm dia 61.02 No Rs.

Item No.-129-Supplying of PVC connection with brass washer of 15 mm dia. & nuts 60 cm

129 25.00 60.6 Rupees Sixty and Sixty Paisas Only No Rs.

130 20.00 Item No.-130-Supply of SS Nipple - 4" - 15mm dia 101 Rupees One Hundred One Only No Rs.

Rupees One Hundred Forty One and

131 25.00 Item No.-131-Supply of UPVC Brass FT - (A) 15mm dia. 141.4 No Rs.

Forty Paisas Only

Rupees Two Hundred Eighty Seven

132 25.00 Item No.-132-Supply of UPVC Brass FT - (B) 25mm dia. 287.85 No Rs.

and Eighty Five Paisas Only

Rupees Four Hundred Twenty Four

133 10.00 Item No.-133-Supply of UPVC Brass FT - (C) 32mm dia. 424.2 No Rs.

and Twenty Paisas Only

134 20.00 Item No.-134-Supply of UPVC Brass FT - (D) 40mm dia. 606 Rupees Six Hundred Six Only No Rs.

Rupees Eight Hundred Eighteen and

135 20.00 Item No.-135-Supply of UPVC Brass FT - (E) 50mm dia. 818.1 No Rs.

Ten Paisas Only

Rupees One Hundred Eighty Three

136 25.00 Item No.-136-Supply of UPVC Brass MT - (A) 15mm dia. 183.82 No Rs.

and Eighty Two Paisas Only

Rupees Three Hundred Seventy Eight

137 25.00 Item No.-137-Supply of UPVC Brass MT - (B) 25mm dia. 378.75 No Rs.

and Seventy Five Paisas Only

Rupees Five Hundred Ninety and

138 10.00 Item No.-138-Supply of UPVC Brass MT - (C) 32mm dia. 590.85 No Rs.

Eighty Five Paisas Only

Rupees Six Hundred Eighty One and

139 15.00 Item No.-139-Supply of UPVC Brass MT - (D) 40mm dia. 681.75 No Rs.

Seventy Five Paisas Only

Rupees One Thousand Forty Five and

140 20.00 Item No.-140-Supply of UPVC Brass MT - (E) 50mm dia. 1045.35 No Rs.

Thirty Five Paisas Only

Rupees Twenty Four and Twenty Four

141 20.00 Item No.-141-Supply of UPVC T - (A) 15mm dia. 24.24 No Rs.

Rupees Fifty Seven and Fifty Seven

142 20.00 Item No.-142-Supply of UPVC T - (B) 25mm dia. 57.57 No Rs.

143 10.00 Item No.-143-Supply of UPVC T - (C) 32mm dia. 90.9 Rupees Ninety and Ninety Paisas Only No Rs.

Rupees One Hundred Seventeen and

144 15.00 Item No.-144-Supply of UPVC T - (D) 40mm dia. 117.16 No Rs.

Sixteen Paisas Only

Rupees One Hundred Seventy Eight

145 25.00 Item No.-145-Supply of UPVC T - (E) 50mm dia. 178.77 No Rs.

and Seventy Seven Paisas Only

Rupees Five Hundred Ninety Eight

146 25.00 Item No.-146-Supply of UPVC T - (F) 75mm dia. 598.93 No Rs.

and Ninety Three Paisas Only

Rupees One Thousand Seven and

147 20.00 Item No.-147-Supply of UPVC T - (G) 100mm dia. 1007.98 No Rs.

Ninety Eight Paisas Only

Rupees Nineteen and Nineteen Paisas

148 20.00 Item No.-148-Supply of UPVC Elbow - (A) 15mm dia. 19.19 No Rs.

Rupees Forty Four and Forty Four

149 20.00 Item No.-149-Supply of UPVC Elbow - (B) 25mm dia. 44.44 No Rs.

Rupees Sixty Six and Sixty Six Paisas

150 10.00 Item No.-150-Supply of UPVC Elbow - (C) 32mm dia. 66.66 No Rs.

151 15.00 Item No.-151-Supply of UPVC Elbow - (D) 40mm dia. 90.9 Rupees Ninety and Ninety Paisas Only No Rs.

Rupees One Hundred Thirty Three

152 20.00 Item No.-152-Supply of UPVC Elbow - (E) 50mm dia. 133.32 No Rs.

and Thirty Two Paisas Only

Rupees Four Hundred Forty One and

153 20.00 Item No.-153-Supply of UPVC Elbow - (F) 75mm dia. 441.37 No Rs.

Thirty Seven Paisas Only

Rupees Seven Hundred Forty Two

154 10.00 Item No.-154-Supply of UPVC Elbow - (G) 100mm dia. 742.35 No Rs.

and Thirty Five Paisas Only

Rupees Sixteen and Sixteen Paisas

155 20.00 Item No.-155-Supply of UPVC Coupler - (A) 15mm dia. 16.16 No Rs.

Rupees Thirty Six and Thirty Six

156 20.00 Item No.-156-Supply of UPVC Coupler - (B) 25mm dia. 36.36 No Rs.

Rupees Fifty One and Fifty One Paisas

157 10.00 Item No.-157-Supply of UPVC Coupler - (C) 32mm dia. 51.51 No Rs.

Rupees Sixty Five and Sixty Five

158 25.00 Item No.-158-Supply of UPVC Coupler - (D) 40mm dia. 65.65 No Rs.

159 25.00 Item No.-159-Supply of UPVC Coupler - (E) 50mm dia. 90.9 Rupees Ninety and Ninety Paisas Only No Rs.

Rupees Two Hundred Fifty Four and

160 25.00 Item No.-160-Supply of UPVC Coupler - (F) 75mm dia. 254.52 No Rs.

Fifty Two Paisas Only

Rupees Three Hundred Ninety Nine

161 22.00 Item No.-161-Supply of UPVC Coupler - (G) 100mm dia. 399.96 No Rs.

and Ninety Six Paisas Only

Rupees Forty Two and Forty Two

162 25.00 Item No.-162-Supply of UPVC Union - (A) 15mm dia. 42.42 No Rs.

163 20.00 Item No.-163-Supply of UPVC Union - (B) 25mm dia. 80.8 Rupees Eighty and Eighty Paisas Only No Rs.

Rupees One Hundred Twenty and

164 5.00 Item No.-164-Supply of UPVC Union - (C) 32mm dia. 120.19 No Rs.

Nineteen Paisas Only

Rupees One Hundred Eighty Nine and

165 20.00 Item No.-165-Supply of UPVC Union - (D) 40mm dia. 189.88 No Rs.

Eighty Eight Paisas Only

Rupees Two Hundred Ninety Five and

166 20.00 Item No.-166-Supply of UPVC Union - (E) 50mm dia. 295.93 No Rs.

Ninety Three Paisas Only

167 25.00 Item No.-167-Supply of S.S. Jali for Bathroom Chokdi 6" Χ 6" size 30.3 Rupees Thirty and Thirty Paisas Only No Rs.

Rupees Seventy Six and Seventy Eight

168 25.00 Item No.-168-Supply of UPVC Pipe jointing solution 50 ml 76.78 No Rs.

I/We am/are willing to carry out the work at % above/below percent (Should be written in figures

Amount of my/our tender work as under.

* Estimated Amount for part A * Estimated Amount for part A

Put to tender ₹ 6,478,583.33 Put to tender ₹

Credit Item : -

Credit of Flush Door shutter with fitting Rs.

169 16.00 442.00 Rupees Four Hundred Forty Two Only No

Credit of single shutter window with fitting (Glaze) Rupees Two Hundred Forty and

Eighty Paisas Only

Credit of Rough Kota - @ 50% Rupees Ninety and Eighteen Paisas

Credit of Brick Rs.

172 2500.00 3.20 Rupees Three and Twenty Paisas Only No

173 100.00 Credit of Piller/Bib/stop/Angle cock /tab 60.00 Rupees Sixty Only No Rs.

Credit of Ventilation Rupees One Hundred Two and Forty Rs.

credit of Floor Tile @ 50% Rupees Forty One and Seventy Six Rs.

Net Total Rs. (B)

Total Gross Amount ( A - B )

Rupees Sixty Four Lacs Forty Nine Thousand Three Hundred Seventy Nine and Twenty Three Paisas Only

I/We am/are willing to carry out the work at % above percent (Should be written in figures and

Amount of my/our tender work as under.

* Estimated Amount for part B * Estimated Amount for part B

Put to tender ₹ 29,204.10 Put to tender ₹

Part B Credit -

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017

as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

5 Credit of Dismantled Materials amount Rs.29204.10 will be Deducted from 1st R.A. Bill.

Sign of Contractor Deputy Executive Engineer Executive Engineer

Capital Project Sub Division No. 4 Capital Project Division No.2

Gandhinagar Gandhinagar