CONSTRUCTION OF MUKHYA MANTRI LOK BHAWAN First Floor AT Karsog DEV BLOCK KARSOG DISTT MANDI HP

Amount

Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters)so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness , all as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Columns, pillars ,posts and struts square, rectangular or polygonal in plan as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Beams cantilever girders and lintels side and soffits of beams, beams haunchings, cantilevers, bressumers and lintels any depth in all heights from floor as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Edges of slab and breaks in floor and walls under 20 cm wide as per direction of engineer in charge as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying mechanically mixed & vibrated reinforced cement concrete design mix to obtain/achieve the compressive strength of M-25 (M-tweny five) with cement contents not less than 400 kg per cubic metre with graded crushed stone aggregate 20 mm nominal size mechanical mixed / vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Column, pillars, posts and struts upto floor two level

Suspended floor roofs landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto all floor level .

Stair cases (except spiral stair case)excluding landing but including preparing of the surface and finishing of nosing upto floor two level

Providing Tor steel reinforcement Fe500 ISI make high yield strength for Reinforced Cement Concrete work including bending, binding straighting and placing in position complete in all heights including cost of binding wires completed and other incidentals due for its completion for as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing mild steel plain grills of required pattern in wooden frames of window etc. with mild steel flat square of round bars with round headed bolts and nuts or screw etc. including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Brick work using Second class common burnt clay buildings bricks in Cement mortar 1:5(One Cement : five sand ) in super structuer to all floor levels as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Half brick masonry in common burnt clay building Second Class Bricks in Cement Mortar 1:4 (1 cement:4 sand) in all respect as as required in all leads & lift in all levels including carriage and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing woodwork in frames of doors, windows ,clerestory , windows and other frames wrought,framed and fixed in position 2nd class deodar wood. in all respect as per direction and to the entire satisfaction of Engineer-in-Charge..

Providing and fixing 2nd class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 50 mm thick in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. .

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges n all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing M.S. pressed butt hinges bright finished with necessary screws etc. complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing M.S. pressed butt hinges bright finished with necessary screws etc. complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing M.S. door latch with screws etc. complete.in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing M.S. door latch with screws etc. complete.in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Kota stone slab flooring 20 mm (average) thick base of lime mortar 1:1:1 (1 lime putty: 1 surkhi :1 sand)laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry as required in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

15mm cement plaster in two coats in cement mortar 1:5 backing coat 10mm and finishing coat 5mm thick on fair side of brick masonry/stone masonry/concrete walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

6 mm plaster to ceiling in cement mortar 1:3 in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as required in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the as required in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease, dirt and other foreign matter sand papering and knotting Readymixed paint brushing wood primer lead for priming in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matters, sand papering and stopping in all respect as per direction and to the entire satisfaction of Engineer-in-Charge..

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and laying 15mm nominal bore in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing Orissa Pattern vitreous China wash down, water closet Squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately).in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing Indian Universal closet vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):-in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing Sand Cast iron 100 mm size 'P' or 'S' trap for water closet ( squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1 cement : 1 sand) in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing to wall ceiling and floor vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon,15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately).in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan.in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing white plastic seat and cover (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing one piece construction white vitreous China squatting plate urinal with an integral longitudinal flushing pipe, 100mm dia half round channel. automatic C.I. flushing cistern with fittings R.S. or C.I. brackets of standard size, G.I flush pipe for back and front flush with standard spreader pipes with fittings G.I clamps, white vitreous tiling 200 mm high to front and side walls with white vitreous corners and angles set in neat cement, standard urinal C.I. trap 65 mm diameter with vent arm and outlet grating and coupling in C.P. brass complete, including painting the cistern and fittings, cutting and making good the walls and floors etc. where in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing one piece construction white vitreous China squatting plate urinal with an integral longitudinal flushing pipe, 100mm dia half round channel. automatic C.I. flushing cistern with fittings R.S. or C.I. brackets of standard size, G.I flush pipe for back and front flush with standard spreader pipes with fittings G.I clamps, white vitreous tiling 200 mm high to front and side walls with white vitreous corners and angles set in neat cement, standard urinal C.I. trap 65 mm diameter with vent arm and outlet grating and coupling in C.P. brass complete, including painting the cistern and fittings, cutting and making good the walls and floors etc. where in all respect as per direction and to the entire satisfaction of Engineer-in-Charge Range of two squatting plates with 10 litres C.I. Automatic flushing cistern.

Providing and fixing white glazed fireclay stall urinal with automatic C.I. Flushing cistern (of approved make ) with fittings R.S. or C.I.Brackets standard size C.P. brass flush pipe spreaders with unions and clamps (all in C.P.brass) C.I. Trap with outlet grating and other coupling in C.P. brass including painting of cistern and fittings, cutting and making good the walls and floors where required in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing white glazed fireclay stall urinal with automatic C.I. Flushing cistern (of approved make ) with fittings R.S. or C.I.Brackets standard size C.P. brass flush pipe spreaders with unions and clamps (all in C.P.brass) C.I. Trap with outlet grating and other coupling in C.P. brass including painting of cistern and fittings, cutting and making good the walls and floors where required in all respect as per direction and to the entire satisfaction of Engineer-in-ChargeRange of two stall urinals with 10 litres C.I. automatic flushing cistern.

Providing and fixing 5 litres capacity automatic flushing cistern with a pairpair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus,mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 15mm nominal bore C.P. brass flush pipe /spreaders for urinal with fitting such as unions,clamps etc. (all in C.P. Brass) including cutting holes and making good the same in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing Flat back 630mmx450mm vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 32mm dia C.P. Brass waste for wash basin or sink in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 32mm dia M.I. Union for wash basin or sink in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 32mm dia C.P. Brass S. Trap for wash basin and sink in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 32 mm dia C.P. Bottle Trap for wash basin and sink in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap.in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 15mm dia galvanised mild steel puff pipe one metre long complete with brass perforated cap in all respect as per direction and to the entire satisfaction of Engineer-in-Charge-

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P.Brass screws and washers. in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 750mm x 20mmm C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P.Brass screws in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing C.P Brass Toilet paper holder in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing Glass container liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 15mm dia CP Brass bib Tap with capstan head in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 15mm C.P Brass pillar tap with Capstan head in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 20mm nominal bore C.P. connection pipe with brass unions in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 25mm nominal bore brass unions to connect iron to lead including one soldered joint in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 32mm rubber or vulcanite plug (waste) with ring in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 15mm G.I./M.I Union in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 15mm dia with Aerator C.P Brass pillar tap with Capstan head in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and laying 100 mm cement concrete 1:5:10 (1 Cement: 5 Sand :10 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the following internal diameters, necessary form work and curing complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level in all respect as per direction and to the entire satisfaction of Engineer-in-Charge

GHANSHYAM LAL

SUDESH KUMAR GOVT CONTRACTOR

MANMOHAN GUPTA GOVT CONTRECTOR