Repair to damage perimeter brick wall

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft soil.

M & L Cement concrete type D2 1:4:8 (40 mm graded aggregate ) in foundations, filling and mass concrete.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:4 cement mortar .

Reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) (nominal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and inshelves.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Taking down cement or cement lime plaster,any descriptio on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing downwith water, etc

Rendering 12mm thick on fair faces of brick work or concrete surfaces cement plaster 1:4 rendering is to be finished even and smooth (without using extra lime or cement).

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.Flat surface.

S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 .

Providing and Fixing G.I. chain link fabric fencing of required with mesh size 50x50 mm including strengthing with 2 mm dia wire or nuts,bolts and washer as required complete as per the direction of Engineers -in -charge Made of G.I.wire of dia 4 mm .

Providing Cement concrete Type B2 1:2:4 (40 mm graded aggregate) in foundations, filling and mass concrete

Providing, cement concrete in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , as directed E I C TypeB0 1:2:4(12.5mm graded aggregate)

M & L painting on steel Surfaces of any description, over 10cm in width or girth, not otherwise described with preparation of new or previously untreated surface with one coat of red-oxide primer and two coats of synthetic enamel paint. Make:- Asian/Burger/Nerolac or equivalent

Preparing old surfaces plastered or unplastered and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work/old (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coatof exterior primer applied @ 2.20 kg/10 sqm) Make:- Water proof paint Apex (Ultima) Asian/Dulux weathermax/Nerolac/BURGER or equivalent

S & F GI concertina coil 600 mm dia(50 turn/coil) expendable 6 to8 mtr fixed on angle iron frame over brick wall/angle post all as specified as directed

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each) line wire to be measured.

M/S P K ASSOCIATES (BID ID -741626)

M/S RP AGRAWAL (BID ID -741987)