Construction of Type II quarters building at Karinthalam in Kanahangad Range

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Laterite neatly dressed stones of size 35x20x20cm in cement mortar 1:6 for foundation and basement on nearest size including all cost of materials, labour charges etc. complete.

Laterite neatly dressed stones of size 35x20x20cm. Or nearest size in cement mortar 1:6 for superstructure above plinth level upto floor five level including all cost of materials, labour charges etc. complete.

Laterite dry masonry with neatly dressed stines of size 35x20x20cm or nearest size for Soak including all cost of materials, labour charges etc. complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.

Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars.

Providing wood work in frames of doors, windows,clerestory windows amd other frames, wrough frames and fixed in position with holdfast lugs or with dash fastener of required dia & legth (holdfast lugs or dash fastens shall be paid for separately)using good quality of Anjily wood.

Providing and fixing paneled and glazed shutters for doors, windows and clestroy windows 35 mm thick shutters including ISI marked M.S.pressed butt hinges bright finished or required size with necessary screws excluding paneling which will be paid for separately or complete as per direction of Engineer -in-charge using Anjily wood.

Providing and fixing glazed shutters for doors and window and clestroy window using 4mm thick float glass panes including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws.

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

9mm cement plastering of mis 1:3 (1cement, 3 fine sand) including all cost of materials, labour charges etc. complete,

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall

.Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing 30 mm thick plain PVC door shutters

Applying priming coat with ready mixed pink or grey primer of approved and madufactur or wood work (hard and soft wood)

White washing with lime to give on even shade (Three or more coats)

Wall painting with acrylic emulsion of approved brand and manufature to give an even shade. Two or more coats on new work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

Supplying and fixing 300mm Aluminium Aldrops

Providing and fixing iron hooks and eyes (100mm)

Fixing brass, tower bold

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes joining of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of engineer-in-charge 25mm dia 10kgf/cm2 internal work exposed on wall.

Providing and fixing PVC pipes, fittings including fjoint of pipes with one step PVC solvent cement, trencing refitting & testing of joints complete as per direction of Engineer-in charge.

Providing and fixing PVC Pipe fitting including fixing the pipe with clamp at 1.00m spacing. This includes joining of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of engineer-in-charge 20mm dia 10kg/cm2.

Providing and fixing PVC Pipe fitting including fixing the pipe with clamp at 1.00m spacing. This includes joining of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of engineer-in-charge 20mm dia 10kg/cm2.

Providing and fixing PVC Pipe fitting including fixing the pipe with clamp at 1.00m spacing. This includes joining of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of engineer-in-charge 63mm dia 4kg/cm2.

Providing and fixing PVC moulded fittings/accessories for Ridging PVC pipes including jointing with PVC solvent cement- 110mm dia 45degree Elbow.

Providing and fixing PVC moulded fittings/accessories for Ridging PVC pipes including jointing with PVC solvent cement- 110mm dia Door Elbow.

Providing and fixing PVC moulded fittings/accessories for Ridging PVC pipes including jointing with PVC solvent cement- 110mm dia bend.

Providing and fixing PVC moulded fittings/accessories for Ridging PVC pipes including jointing with PVC solvent cement- 110X100mm dia Tee.

Providing and fixing PVC moulded fittings/accessories for Ridging PVC pipes including jointing with PVC solvent cement- 110X110x100mm dia door Tee.

Providing and fixing brass hibcock of approved quality. 20mm nominal bare

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with G.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: providing 610x510 mm bowl depth 200 mm (Kitchen zinc without brain board

Mohammed Ashraf T T

MUHAMMED SIRAJUDHEEN M