REPAIR/REPLACEMENT OF AREA DRAINAGE, CULVERTS, PATHS, HARD STANDING, FENCING, COMPOUND WALL, GATE ETC. UNDER DGNP(V).

Amount

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness and removing rubbish off from the premises of MD land, complete all as specified and directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material & labour for precast cement concrete block masonry with solid blocks type C-1, 1:3:6 (20mm graded crushed granite stone aggregate) exc 10cm in width and set in cement mortar 1:6, complete all as specified and directed.

Material & labour for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 and finished the surface even and fair without using extra cement complete all as specified and directed.

Material & labour for preparation of newly plastered surfaces and applying three coat of white wash on walls complete all as specified and directed.

Material & labour for providing cement concrete 1:2:4, type B-1 (20mm graded crushed granite aggregate) as in coping etc. complete all as specified and directed.

Material & labour for providing cement concrete 1:3:6, type B-1 (20mm graded crushed granite aggregate) as in haunching/benching with and including necessary formwork; complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.; complete all as specified and directed.

Material & labour for 20mm thick screed bed or bedding layer in CM 1:4 for laying tile etc. complete all as specified and directed.

Material & labour for chequered cement concrete tiles 30cmx30cmx25mm thick ,set, jointed and pointed in neat cement slurry in floor complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

Material & labour for sand filling for cushion bed below interlocking paver blocks complete all as specified and directed.

Material & labour for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, jointed with grey cement and pigment complete all as specified and directed.

Material & labour for providing precast cement concrete type C-1 1:3:6 (20mm graded crushed granite stone aggregate) as in landings, coverslabs (for drain etc.), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain facesand setting in cement mortar 1:6; complete all as specified and directed.

Supply and fixing TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Supply and fixing TMT bars 8mm dia and over upto and including 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for in stirrups, spaces and binders and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Supply & fixing in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacing's and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Note:-each line wire to be measured)

Supply & fixing in repair 4 mm dia chain link fencing including line wires, any mesh, size 100 x 100 mm and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply & fixing in repair for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirm to Fe 410-W(Gde-E- 250) quality-B, complete all as specified and directed.

Supply & fixing for mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting ,include welding or riveting, etc., and similar work conforming to Fe-290 Gde E-165 and also including to taking out old posts from concrete or earth, complete all as specified and directed.

Supply and fixing mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Supply & fixing in repair 450mm dia concertina coil for security purpose on security wall, core wire diameter ranges 2.4 to 3.0mm, galvanized barbed tape and high tensile galvanised corewire with continous spiral razor blade, blade thickness 0.5mm, colour silver, complete all as specified and directed.

Material & labour for preparation of new surface of steel and iron work of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Supply and fixing in repair framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W(Gde-E-250) Quality 'B', complete all as specified and directed.

M S G CONSTRUCTIONS (BID ID -3336626)

MEGHANAENTERPRISES (BID ID -3332549)

SRI LAKSHMI GANAPATHI CONSTRUCTIONS (BID ID -3336868)

sai ganesh enterprises (BID ID -3333767)

MAHIRA ENGINEERING & INFRASTRUCTURE (BID ID -3336245)

NIRANJAN NETHRA BUILDERS (BID ID -3332793)

SRI SAMPATH SAI MODERN ARCH CONSTRUCTIONS (BID ID -3330455)

YVR CONSTRUCTIONS (BID ID -3331227)

SRI ADITYA CONSTRUCTIONS (BID ID -3336865)

MOURYA BUILDERS (BID ID -3336804)

M ANJANEYULU (BID ID -3336525)

RAM CHARAN CONSTRUCTIONS (BID ID -3336663)