DG - TARAPUR INDUSTRIAL AREA..Tarapur Indl. Area.. M and R to water supply scheme at Tarapur Indl. Area. Providing manpower and machinery for tracing out and attending leakages in distribution system for 24 months - 2nd Call

MAZDOOR (MALE)

Fitter 1st class

Providing service for the job of distribution of monthly water bills of consumers,TEPS bill, all kinds of Notices /letters to consumers through out the month including tconveyence,all material,labours,taxes,duties etc. complete.

HIRE CHARGES OF MACHINERIES

Rent for JCB

Rent for poclain

Rent for Compressor with fuel

Rent for welding set with Electric set

Truck hire charges upto 20 km

Rent for Crane

Generator 41 to 60 KVA

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261) (i) The Contractor at his request may be allowed to start construction of masonry steining so as not to allow silting of well in oncoming monsoon and while paying masonry, 25% amount shall be withheld and released only when excavation to the full depth is completed. (ii) Dewatering : Total dewatering charges are to be proposed in the tender as lumpsum amount and 75% is payable for excavation and 25% is payable for construction of well / gallery. Out of 75% excavation, break-up shall be as under 25% for last 1 M depth. 20% for 2 M depth which is just above last 1 M depth. 15% for 2 M depth which is just above last 3 M depth. 15% for the rest of depth from water table level. The above conditions will restrict the tendencies of agencies to avoid deepening of wells, etc. to the required depth.

Providing misc.maintence material for attending water supply pipe line leakages as and when required as per site necessityand directed by Engineer Incharge

Rubber ball for Air valve of Shore hardness 70-80 with acid -alkaline resistance a)50mm dia.

Rubber ball for Air valve of Shore hardness 70-80 with acid -alkaline resistance b) 80mm dia.

Rubber ball for Air valve of Shore hardness 70-80 with acid -alkaline resistance c)100mm dia.

Rubber ball for Air valve of Shore hardness 70-80 with acid -alkaline resistance d) 150mm dia.

e) Gland packing 16mm / 18mm

Nutbolts

Rubber Gasket (6 mm thick)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.

Providing, erecting pre-cast elements such as cover slabs for drains, grills, kerbs, kerb stone, dividers, manholes, frames, manholes covers, gutters, fence posts grills, rails lintels, sills, bed blocks, steps or any other member or element as per drawings & specifications using RCC grade M-20 including shuttering as may be required, compacting by plate vibrator, curing and finishing the element where required with 1:3 cement mortar, transporting to site and erecting in position grouting with cement mortar 1:3 as may be required and curing etc. all labour and material complete. (Including cost of Steel reinforcement) ( Rates excluding GST)

(b) Elements, weighing from 51 to 100 kg.

Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D. I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete. Providing Rubber Gasket -EPDM Gaskets for C. I. / D.I. Pipes

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to requried size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc, complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Dia of Pipe : 219.10 mm (O. D.) Thickness of pipe : 3) 6.4 mm

Dia of Pipe : 273.10 mm (O. D.) Thickness of pipe : 3) 6.4 mm

Supply of C. I . Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993.

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Providing structural steel work in rolled stanchions fixed with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connecting to truss members and like as per detailed designs and drawings or as directed by Engineer-in-charge including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-3/275)

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259)

Lift 0 to 1.5 M

Providing at dept store or work site Jiffy patch clamp joints to be used for instantaneous repair of C.I. pipes including cost of rubber sealing gasket (IS:5382-1985) and nut bolts. coated or otherwise protected from rusting including all taxes and duties except octroi. (Rates excluding GST)

100 mm diameter

150 mm diameter

200 mm diameter

250 mm diameter

300 mm diameter

400 mm diameter

500 mm diameter

600 mm diameter

Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)

In RCC M-150

In RCC M-200

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F- 17/306)

Corrosion Resistant Steel (Fe 500)

White lead

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valves - PN -1 (Without by pass)

Please Enable Macros to View BoQ information