Supply and Fixing of Furniture Work for room no. 007, NFSU, Gandhinagar

Amount

Manufacturing, assembling, transporting and placing / fixing in position knock down factory made modular furniture such as Storage, work top, pedestal unit, side rack,KD panel as per drawing, specification and direction of Engineer in charge. All outer exposed edge of all panels shall be covered and sealed with PVC edge banding tape of required thickness of Rehau or Dollkin or with hot melt, minifix fittings, plastic dowels, modular clips screws washer etc.in approved factory.(A) Back Panel: Made of 4mm thick HPL Compact Sheet, with exposed side 1mm thick decorative high-pressure lamination sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer conforming to IS : 2046 and other side with 0.6mm thick balancing lamination conforming to IS : 2046, pressed on a hot-press method with Fevicol- SD ,Henkel (Dorus 4972) adhesives. All the edges must be sealed with 2mm PVC/ABS (Poly Vinyle Chloride /Acrylonitrile Butadiene Styrene) edge bands, glued on Computer controlled automatic edge banding machine with pre-milling operation using hot-melt glue while pre-milling function putting 'on' mode.(B) KD PANEL : Made of 16 mm thick calibrated BWR plywood conforming to IS 303, with exposed side 1mm thick decorative high-pressure lamination sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer conforming to IS : 2046 and other side with 0.6mm thick balancing lamination conforming to IS : 2046, pressed on a hot- press method with Fevicol-SD ,Henkel (Dorus 4972) adhesives. All the edges must be sealed with 2mm PVC/ABS (Poly Vinyle Chloride /Acrylonitrile Butadiene Styrene) edge bands, glued on Computer controlled automatic edge banding machine with pre-milling operation using hot-melt glue while pre-milling function putting 'on' mode.(C) Top Panel: Made of 16 mm thick calibrated BWP plywood conforming to IS 710 & 25MM HDHMR, with exposed side 1mm thick decorative high-pressure lamination sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer conforming to IS : 2046 and other side with 0.6mm thick balancing lamination conforming to IS : 2046, pressed on a hot-press method with Fevicol- SD ,Henkel (Dorus 4972) adhesives. All the edges must be sealed with 2mm PVC/ABS (Poly Vinyle Chloride /Acrylonitrile Butadiene Styrene) edge bands, glued on Computer controlled automatic edge banding machine with pre-milling operation using hot-melt PUR glue while pre-milling function putting 'on' mode(D) Providing and fixing 38X20 mm teakwood architrave with melamine polsh finish of approved brand and shade at the junction of wardrobe and walls as shown in drawings as directed by the Engineer in charge..(E) Knock-down Joining System (KD fittings) : Devised with Inbuilt 8 mm x 45 mm concealed bolt with 15 mm eccentric cranks, 8 mm jute dowels,SS Minifix , 75 x 50 mm M.S. brackets, etc. complete with drilling and fixing. Drilling and boring work to be done on CNC (computer numerical control) Multi-drill machine in KD- 32 system.

Providing and fixing 16 mm thick calibrated BWP plywood confirming to IS 710

Providing and fixing 25 mm thick HDHMR having density more than 850 kg/m3 (GREENPLY,ACTION TESA, CENTURY)

Providing and fixing 4 mm thick HPL Compact Sheet

Providing and fixing PVC/ABS edge beading 0.80/2mm glued with PUR Glue with premilling

Providing and fixing 1 mm thick high pressure laminate glued with PUR adhesive

Providing and fixing 0.6 mm thick high pressure balancing laminate glued with PUR adhesive

Providing and fixing zink coated steel auto closing spring loaded hinges of Hettich/Grass/Hafele make of approved brand to cupboard shutters with stainless steel screws including making necessary recess in panel board and finishing etc. complete as per direction of Engineer-in-charge

Providing and fixing powder coated/zink coated soft close telescopic drawer channels 400mm long with necessary screws etc. complete as per directions of Engineer- in-charge.

Providing and fixing stainless steel (SS 304 grade) H shaped handles (96MM HOLE CENTER) of hettich/hafele/Yale or equivalent with necessary stainless steels crews etc. complete:

Supplying and fixing High Quality Wardrobe Lock with computerised Brass Key with necessary screws etc. complete: as specified in drawing and as approved by Engineer in charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessaryfilling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and makingnecessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

12MM Toughened Glass With Floor Spring & Top - bottom patch fitting

Door Handle - 600mm

BOTTOM MOUNTED LOCK (YALE, OZONE, DORMA,POLO)

S.S. STOPPER (SS 304)

Gable end F type Leg made from 40X40 MS section with concealed joineries and Spacers OR Gable Ends made from Tapper and Slant fabricated from 2mm sheet with powder coating and mounting flange, in Powder coating finish.

Tie frame for supporting Gable ends and Modesty in bottom frame of work table made from 40X20X1.6mm Box section of CRC, ERW, MS section with mountings for interconnection with Gable ends, Top and Modesty brackets.

Providing and Fixing App 450/500 X 400/350 mm size, 8mm thick laminated glass consisting of two 4mm thick float glass panels, which consists of a tough interlayer, bonded together between two panes of glass & cured under infra-red radiation. The glass screen would be Shatter Proof and to hold its position even after breakage due to inter-layer and remain intact till deliberately removed. All the panels with polished edges, 25mm x 25mm round corners on all 4 sides, with highly durable lacquering on surface 2 and surface 3. complete as per design and requirements. Mounting Details: Ebco or equivalent make Heavy duty eccentric D bracket guided on slot made from Zinc alloy material with positive locking system.

Computer chair low back mesh CC : Providing and fixing the chair of make as per approval. Cushioned Seat & Back, PP outer back cover, PP arms, Single Back lock, Push back mechanism, Gas lift for seat height adjustment, Nylon base with twin wheel castor.

Mesh Back medium chair - Supply and installation of approved make size W 660 X D 600 X 950 H with fabric upholstery on Pu Foam Seat, Adjustable head rest and arm rest, adjustable lumbar support, self adjustable mechanism with 4 locking position with nylon caster and star base, nylon star base for extra load carrying capacity, The chair include pneumatic seat height adjustment, tilt adjustment for back and also with two pair of caster, as per design given by the architect and approved by the engineer in charge.