Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60.6 LAccepted-AOC | ₹60.6 L | L1 | Accepted-AOC L1 |
| 2 | L2₹63.3 L+₹2.6 L (4.35%)Rejected-AOC | ₹63.3 L+₹2.6 L (4.35%) | L2 | Rejected-AOC L2 |
| 3 | L3₹65.1 L+₹4.4 L (7.31%)Rejected-AOC | ₹65.1 L+₹4.4 L (7.31%) | L3 | Rejected-AOC L3 |
| 4 | L4₹67.2 L+₹6.5 L (10.8%)Rejected-AOC MAYURAM PAYANCHERY IRITTY KANNUR PIN 670001 | IRITTY | KANNUR | KERALA | 670001 | ₹67.2 L+₹6.5 L (10.8%) | L4 | Rejected-AOC L4 |
| 5 | L5₹68.6 L+₹8.0 L (13.1%)Rejected-Finance | ₹68.6 L+₹8.0 L (13.1%) | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | ANISH MATHEW L1 | MD SHAVEZ L2 | MOHAMMED RASHID P H L3 | biju p v L5 | PRAVAH INFRATECH LLP L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00Detailed Estimate | ||||||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 26,124.33 | kg | 126.03 ₹32,92,448.81 Lowest | 160 ₹41,79,892.16 | 130 ₹33,96,162.38 | 158 ₹41,27,643.51 | 165.3 ₹43,18,351.09 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 6,396.41 | kg | 174.58 ₹11,16,685.96 | 132.68 ₹8,48,676.21 Lowest | 160 ₹10,23,426.24 | 148 ₹9,46,669.27 | 143.7 ₹9,19,164.69 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1,292.9 | kilogram | 108.91 ₹1,40,809.41 | 82.77 ₹1,07,013.08 Lowest | 130 ₹1,68,076.61 | 110 ₹1,42,218.67 | 90 ₹1,16,360.73 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1,220.72 | sqm | 786 ₹9,59,489.06 | 597.36 ₹7,29,211.69 Lowest | 945 ₹11,53,584.18 | 980 ₹11,96,309.52 | 673 ₹8,21,547.25 |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 47.99 | metre | 527.38 ₹25,310.02 | 400.8 ₹19,235.19 Lowest | 700 ₹33,594.4 | 600 ₹28,795.2 | 421 ₹20,204.63 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 2,291.23 | sqm | 153.87 ₹3,52,550.94 | 116.94 ₹2,67,935.97 | 143 ₹3,27,645.32 | 70 ₹1,60,385.82 Lowest | 133.8 ₹3,06,566.04 |
| 1.01 | OD88388/2024-2025:Supplyingand fixing 150mm dia PVC rain water gutter semi circular section including all fittings etc complete | 197.47 | metre | 240.14 ₹47,420.45 | 182.5 ₹36,038.28 Lowest | 1,320 ₹2,60,660.4 | 300 ₹59,241 | 220 ₹43,443.4 |
| 1.01 | 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | 359.7 | metre | 359.27 ₹1,29,229.42 Lowest | 389 ₹1,39,923.3 | 400 ₹1,43,880 | 550 ₹1,97,835 | 475 ₹1,70,857.5 |
Tender Value
₹84.6 L
EMD Value
₹50,000
Closing Date
6 Jun 2026, 11:00 amClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER PWD BUILDINGS DIVISION, THALASSERY
Deposit Providing light roofing at the terrace level of Medical college building (Phase III)- General Civil Work
2026_PWD_853236_1
03/2026-27
Open Tender
Civil Works - Buildings
Item Rate
Pariyaram
Please refer Tender documents.
11 documents required · 11 mandatory
₹2,760
Yes
₹50,000
Yes
10 Aug 2026
29 May 2026
8 Jun 2026
29 May 2026
6 Jun 2026
29 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Detailed Estimate | |||||
| 1.001 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.4 | kg | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.6 | kg | - | - |
| 1.003 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 0.8 | kilogram | - | - |
| 1.004 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 0.6 | sqm | - | - |
| 1.005 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 1 | metre | - | - |
| 1.006 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 0.4 | sqm | - | - |
| 1.007 | OD88388/2024-2025:Supplyingand fixing 150mm dia PVC rain water gutter semi circular section including all fittings etc complete | 1 | metre | - | - |
| 1.008 | 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | 1 | metre | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1441898.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
BOQ_1441898.xls
BOQ • 0.30 MB
SBD.pdf
Tender Documents • 1.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .