Construction of shed on the rooftop of CML building and Maintenance of lecture stand and mess washing area floor and creation of bathroom in the Alder mess of the North Campus of IIT Mandi.

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all lead as per direction of Engineer-in-charge. a) In cement mortar as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead. a) For thickness of tiles 10 mm to 25 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Centering and shuttering including strutting, propping etc. and removal of form for : a) Lintels, beams, plinth beams, girders, bressumers and cantilevers as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) Thermo-Mechanically Treated bars of grade Fe-500D or more as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all lead and lift.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. a) Cement mortar 1:3 (1 cement :3 coarse sand) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. a) Kiln seasoned and chemically treated hollock wood as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately). a) Kiln seasoned and chemically treated hollock wood i) 35 mm thick shutters as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete: a) 100x75x3.50 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) a) 250x16 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) a) 250x10 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378). a) 125 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: a) 250x10 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete a) 125 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). a) Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) a) For fixed portion i) Powder coated aluminium (minimum thickness of powder coating 50 micron) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) a) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). i) Powder coated aluminium (minimum thickness of powder coating 50 micron) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. a) Pre-laminated particle board with decorative lamination on both sides as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. a) Hot finished welded type tubes as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : a) 25 mm thick as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. a) 75 mm diameter as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. a) 110 mm diameter as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. a) Coupler i) 75mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. a) Coupler i) 110mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. a) Single tee without door i) 75x75x75 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. a) Single tee without door i) 110x110x110 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. a) Bend 87.5° i) 75 mm bend as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. a) Bend 87.5° i) 110 mm bend as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

12 mm cement plaster of mix : a) 1:4 (1 cement: 4 fine sand) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

12 mm cement plaster of mix : a) 1:4 (1 cement: 4 coarse sand) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Finishing walls with Acrylic Smooth exterior paint of required shade : a) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. a) One coat as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. a) Two coats as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a) Semi rigid pipe i) 32 mm dia as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. a) 20 mm nominal outer dia. Pipes as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : a) 25 to 40 mm nominal bore as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing uplasticised PVC connection pipe with brass unions : a) 30 cm length i) 15 mm nominal bore as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15 mm nominal bore as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : a) 15mm nominal bore as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing PTMT grating of approved quality and colour. a) Circular type. i) 100 mm nominal dia as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per National Building Code 2009 complete as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc and fixing again at another wall as per the direction of Engineer in charge complete: Of area 3 sq. metres and below as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing PVC Nahani Floor trap as per the direction and entire satisfaction of Engineer in-charge - 75mm x 110mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing PVC multi Floor trap as per the direction and entire satisfaction of Engineer in-charge - 110mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Cleaning of motar and placing in position up to floor five level precast cement concrete solid block/brick/AAC block including hoisting with cement mortar 1:4 (1 cement : 4 coarse sand), cost of required centering, shuttering complete : as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : By using old kota stone shall be provided by the institute and cleaning such as removal of concrete shall be in the scope of the contractor incuding rubbing of the stones: 25 mm thick as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) 12mm thick commercial ply conforming to IS : 1328 BWR type as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing 8-8.5mm thick laminated flooring panels of grade AC4 Class32 - General Commercial/ Heavy Residential with surface finish EIR-Embossed in Registered/Special Synchronized Surface, overlay Highly Resistant Surface impregnated with Melamine resins and Aluminum Oxide. The panels are of High Density Fiberboard of E 1 Standard with Melamine Impregnated Decorative Film o top and Balance Paper (Melamine Impregnated Paper) on the other side of panel. The panels having tongue and groove for laying. The wooden laminated flooring placed of 5mm thick hard foam and polythene including skirting/beading wherever required as per entire satisfaction and direction of engineer in charge. (Complete in all respect)