E Tender for Supply of Steel and Wooden Furniture at Kottayam

OD227761/2025-2026: Manufacturing and supplying Reception Table of size 2000 (W) X 760 (D) x 1060 (H) withcomputer facility with following specification.The table top and gable end are made of 25mm thick chemicaly treated rubber wood of approved quality. The modesty panel is made of 18mm thick chemicaly treated rubber wood.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane selaler and one coat of poly urethane top layer. Three drawers unit of size 400(W) x 150(D) x 450 (H) has been considered. One key board tray with sliding facility is considered . All side panels, shelves and drawer facia are made of 18mm thick chemicaly treated rubber wood . The drawer will have a multipurpose lock of approved make with premium quality.The rate shall be inclusive of cost of material, transportation, loading - unloading charges etc complete, as per manufatctures specification and directions of Engineer-In-charge st all levels. (refer the image in drawing no DP 1006 DRG CL 14 114)

OD228158/2025-2026:Manufacturing and supplying Junior Executive Table of size1220(W)X760(D)x760(H) with following specification.The tabletop and gableend are made of 18mmthick chemicaly treated rubber wood of approved quality. The side/stoarage panel is made of 15mm thick chemicaly treated rubberwood.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of polyurethane top layer.One storage unit of size 400(W)x450(D)x715(H) has been considered.Four drawers unit of size 400(W)x150(D)x450(H) has been considered.All side panels,shelves and drawer facia are made of 24mm thick chemicaly treated rubberwood.The drawer will have a multipurpose lock of approved make with premium quality.The rate shall be inclusive of cost of material, transportation, loading-unloading charges,labour charges,all accessories like knob,lock, drawslider,nail bush25mmdia etc and complete,as per manufatctures specification and directions of Engineer-In-charge at all levels. (refer the image in drawing no DP 1006 DRG CL 14 114)

OD228153/2025-2026: Manufacturing and supplying teapoy with rack of size 900 (W) X 500 (D) x 480 (H) with with following specification.The main frame shall be made of size 30x30mm leg and panel with 30x15mm made of chemicaly treated rubber wood of approved quality and 8mm thick tinted or clear glass of approved make . The suface of the panel should be smoothly finish by polishing two coats of polyuretahane selaler and one coat of poly urethane top layer.The rate shall be inclusive of cost of material, transportation, loading - unloading charges and complete, as per manufatctures specification and directions of Engineer-In-charge at all levels. (refer the image in drawing no DP 1006 DRG CL 14 114)

OD228166/2025-2026:Manufacturing and supplying OPAC stand unit of size 1500 (W) X 1000 (D) x 760 (H) with following specification.The table top and gable end are made of 18mm thick chemicaly treated rubber wood of approved quality. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane selaler and one coat of poly urethane top layer. One key board tray with sliding facility is considered .All side panels, shelves and are made of 18mm thick chemicaly treated rubber wood.The rate shall be inclusive of cost of all material, transportation, loading - unloading charges,labour charges and accessories like slider ,nail bush of dia 25mm etc complete, as per manufatctures specification and directions of Engineer-In-charge at all levels.

OD228157/2025-2026:Manufacturing and supplying book dispaly rack of size of size 1900 (W) X 1450 (D) x 400(H) with following specification.The table top ,side panels,shelves are made of 18mm thick chemicaly treated rubber wood of approved quality. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer. The rate shall be inclusive of cost of all material, transportation, loading - unloading charges,labour charges etc complete, as per manufatctures specification and directions of Engineer-In-charge at all levels. (refer the image in drawing no DP 1006 DRG CL 14 114)

OD228165/2025-2026:Manufacturing and supplying study carrels of size 3000 (W) X 460 (D) x 750 (H)with following specification.The table top ,side/end panels are made of 18mm thick chemicaly treated rubber wood of approved quality. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer. The rate shall be inclusive of cost of all material, transportation, loading - unloading charges,labour charges etc complete, as per manufatctures specification and directions of Engineer-In-charge at all levels. (refer the image in drawing no DP 1006 DRG CL 14 114)

OD228164/2025-2026:Manufacturing and supplying book trolly of size of size 11700 (W) X 1000 (D) x 600 (H)with following specification.The trolly is made of 18mm thick chemicaly treated rubber wood of approved quality with dual PU castor wheel of 60mm dia. The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer. The rate shall be inclusive of cost of all material, transportation, loading - unloading charges,labour charges etc complete, as per manufatctures specification and directions of Engineer-In-charge at all levels. (refer the image in drawing no DP 1006 DRG CL 14 114)

OD228145/2025-2026:Manufacturing a supplying property rack of size 4550x 1900x750mm (40 counter) with following specification.The storage side panels , shelves , top and bottom panels are made up of 15mm thick chemicaly treated rubber wood of approved quality.The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of poly urethane top layer.The rate shall be inclusive of cost of all material ,abour charges, transportation, loading - unloading charges and accessories like nail bush 25mm dia etc complete, as per manufatctures specification,drawings and directions of Engineer-In-charge st all levels. (refer the image in drawing no DP 1006 DRG CL 14 114)

OD228163/2025-2026: Manufacturing and supplying Alamara with glass door of size 1900x1000x450mm with following specification.The storage side panels , shelves ,top and bottom panels are made up of 15mm thick chemicaly treated rubber wood of approved quality.The door shutter are made of 24/15mm thick ( frame 24mm thick and panel slat 15mmthick) chemicaly treated rubber wood with 5mm float glas . The suface of the panel should be smoothly finish by polishing two coats of polyuretahane sealer and one coat of polyurethane top layer.The handles are Satin SS finish of 160mm pitch. All hinges considered are premium make. Necessary good quality hardwares have been considered as required. The alamara will have a multipurpose lock of approved make with premium quality.The rate shall be inclusive of cost of all material ,accessories , labour charges, transportation, loading - unloading charges and accessories like handle,nail bush 25mm dia etc complete, as per manufatctures specification, drawings and directions of Engineer-In-charge st all levels. (refer the image in drawing no DP 1006 DRG CL 14 114)