Interior & Furniture Work for the Construction of New Circuit House Building at Saputara, Dist.Dang.

Name of work :-

Interior & Furniture Work for the Construction of New Circuit House Building at Saputara, Dist.Dang.

BILL OF QUANTITIES

Items Description of Item (with brief Quantity Unit Rate In Amount

No. specification and reference to book of specifications) figures Rs.

1 Providing and Installation of Single Seater Sofa made with teak 18.00 NO 20755.50

wood, all wood shall be of first class seasoned hard wood teak

(CP).Legs shall be of 70mmx35mm in section made to shape as

shown on drg. Wooden arm shall be made to shape out of

35mmx70mm in section teakwood. Front and side rails shall be

of 35mmx100mm in section teakwood.40mmx40mm in section

teakwood bearers shall be provided at the bottom of seatcover

over which 50mm x20mm wooden battens, shall be fixed

equally spaced in the long pieces. Back shall be made of frame

of rails and styles of 70mmx35mm in section teakwood.

(a) The seat and back cushion

shall be of 100 mm to 150 mm thick, 40 Density and of Make:-

Sleepwell / Springwell

(b) The cushion cover should be of Make : D’ Décor / Neptune

/ Raymonds / Vimal or equivalent brand, Colour of tapestry

shall be as directed by Architect/ Site Incharge as per selection/

(c) All polish work shall be done in Melamine finish. Make of

Polish shall be Melamine by Asian Paints / Nerolac / Berger.

Colour of Polish shall be as directed by Architect/ Site Incharge

as per selection/ approval.

Sample approvals needs to be done for the same, once it's

finalized further quantities to be executed after approval.

2 Providing and Installation of Double Seater Sofa made with 11.00 NO 38178.00

teak wood, all wood shall be of first class seasoned hard wood

teak (CP).Legs shall be of 70mmx35mm in section made to

shape as shown on drg. Wooden arm shall be made to shape out

of 35mmx70mm in section teakwood. Front and side rails shall

be of 35mmx100mm in section teakwood.40mmx40mm in

section teakwood bearers shall be provided at the bottom of

seatcover over which 50mm x20mm wooden battens, shall be

fixed equally spaced in the long pieces. Back shall be made of

frame of rails and styles of 70mmx35mm in section teakwood.

(a) The seat and back

cushion shall be of 100 mm to 150 mm thick, 40 Density and of

Make:- Sleepwell / Springwell

(b) The cushion cover should be of Make : D’ Décor / Neptune

/ Raymonds / Vimal or equivalent brand, Colour of tapestry

shall be as directed by Architect/ Site Incharge as per selection/

(c) All polish work shall be done in Melamine finish. Make of

Polish shall be Melamine by Asian Paints / Nerolac / Berger.

Colour of Polish shall be as directed by Architect/ Site Incharge

as per selection/ approval.

Sample approvals needs to be done for the same, once it's

finalized further quantities to be executed after approval.

3 Providing and Installation of Three Seater Sofa made with teak 22.00 NO 49944.50

wood, all wood shall be of first class seasoned hard wood teak

(CP).Legs shall be of 70mmx35mm in section made to shape as

shown on drg. Wooden arm shall be made to shape out of

35mmx70mm in section teakwood. Front and side rails shall be

of 35mmx100mm in section teakwood.40mmx40mm in section

teakwood bearers shall be provided at the bottom of seatcover

over which 50mm x20mm wooden battens, shall be fixed

equally spaced in the long pieces. Back shall be made of frame

of rails and styles of 70mmx35mm in section teakwood.

(a) The seat and back cushion

shall be of 100 mm to 150 mm thick, 40 Density and of Make:-

Sleepwell / Springwell

(b) The cushion cover should be of Make : D’ Décor / Neptune

/ Raymonds / Vimal or equivalent brand, Colour of tapestry

shall be as directed by Architect/ Site Incharge as per selection/

(c) All polish work shall be done in Melamine finish. Make of

Polish shall be Melamine by Asian Paints / Nerolac / Berger.

Colour of Polish shall be as directed by Architect/ Site Incharge

as per selection/ approval.

Sample approvals needs to be done for the same, once it's

finalized further quantities to be executed after approval.

4 Providing and Installation of Center Table made with teak 19.00 NO 18685.00

wood, all dimension, shape and size shall be shown in drwgs.

All wooden work shall be of 1st class seasoned hard teak wood

with melamine polish/ finish. Top shall be of 18mm thick

Italian/ Arificial stone / Quartz as per selection or sample

approval. Expose surface of teakwood shall be polished in

melamine finish with color tone as approved by Architect / Site

Incharge. Make of Polish shall be Melamine by Asian Paints /

Nerolac / Berger and strictly as per manufacturer’s instructions.

PVC/hard rubber shoe of 1st quality shall be screwed all legs.

NOTE : Entire polish work shall be done in the presence of

Engr-in-Charge at site only. Rest all other details & dimensions

as shown in drwgs.

Note: Sample approvals

needs to be done for the same, once it's finalized further

quantities to be executed after approval.

5 Providing and Installation of Corner Table made with teak 25.00 NO 11918.00

wood, all dimension, shape and size shall be shown in drwgs.

All wooden work shall be of 1st class seasoned hard teak wood

with melamine polish/ finish. Top shall be of 18mm thick

Italian/ Arificial stone / Quartz as per selection or sample

approval. Expose surface of teakwood shall be polished in

melamine finish with color tone as approved by Architect / Site

Incharge. Make of Polish shall be Melamine by Asian Paints /

Nerolac / Berger and strictly as per manufacturer’s instructions.

PVC/hard rubber shoe of 1st quality shall be screwed all legs.

NOTE : Entire polish work shall be done in the presence of

Engr-in-Charge at site only. Rest all other details & dimensions

as shown in drwgs.

approvals needs to be done for the same, once it's finalized

further quantities to be executed after approval.

6 Providing and Installation of Coffee Table made with teak 12.00 NO 9595.00

wood, all dimension, shape and size shall be shown in drwgs.

All wooden work shall be of 1st class seasoned hard teak wood

with melamine polish/ finish. Top shall be of 18mm thick

Italian/ Arificial stone / Quartz as per selection or sample

approval. Expose surface of teakwood shall be polished in

melamine finish with color tone as approved by Architect / Site

Incharge. Make of Polish shall be Melamine by Asian Paints /

Nerolac / Berger and strictly as per manufacturer’s instructions.

PVC/hard rubber shoe of 1st quality shall be screwed all legs.

NOTE : Entire polish work shall be done in the presence of

Engr-in-Charge at site only. Rest all other details & dimensions

as shown in drwgs.

Note: Sample approvals

needs to be done for the same, once it's finalized further

quantities to be executed after approval.

7 Providing and Installation of Coffee Table made with teak 25.00 NO 6140.80

wood, all dimension, shape and size shall be shown in drwgs.

All wooden work shall be of 1st class seasoned hard teak wood

with melamine polish/ finish. Top shall be of 18mm thick

Italian/ Arificial stone / Quartz as per selection or sample

approval. Expose surface of teakwood shall be polished in

melamine finish with color tone as approved by Architect / Site

Incharge. Make of Polish shall be Melamine by Asian Paints /

Nerolac / Berger and strictly as per manufacturer’s instructions.

PVC/hard rubber shoe of 1st quality shall be screwed all legs.

NOTE : Entire polish work shall be done in the presence of

Engr-in-Charge at site only. Rest all other details & dimensions

as shown in drwgs.

Note: Sample approvals

needs to be done for the same, once it's finalized further

quantities to be executed after approval.

8 Providing and Installation of Coffee Chair/ Sofa Chair made 24.00 NO 15907.50

with teak wood, all wood work shall be of 1st class seasoned

hard wood (CP teak wood). Plywood : 12-18mm thick BWR

phenol bonded plywood shall be provided, PVC/hard rubber

shoe of 1st quality shall be screwed all legs. Rest all other

details & dimensions as shown in drwgs. FOAM : Polyurethane

foam shall be 75mm thick (with 32 Kg density per cubic meter)

. UPHOLESTRY : D’ Décor / Neptune / Raymonds / Vimal or

equivalent brand, Colour of tapestry shall be as directed by

Architect/ Site Incharge as per selection/ approval. All polish

work shall be done in Melamine finish by Asian Paints /

Nerolac / Berger. Colour of Polish shall be as directed by

Architect/ Site Incharge as per selection/ approval.

approvals needs to be done for the same, once it's finalized

further quantities to be executed after approval.

9 Providing and Installation of Coffee Chair/ Sofa Chair made 25.00 NO 12120.00

with teak wood, all wood work shall be of 1st class seasoned

hard wood (CP teak wood). Plywood : 12-18mm thick BWR

phenol bonded plywood shall be provided, PVC/hard rubber

shoe of 1st quality shall be screwed all legs. Rest all other

details & dimensions as shown in drwgs. FOAM : Polyurethane

foam shall be 75mm thick (with 32 Kg density per cubic meter)

. UPHOLESTRY : D’ Décor / Neptune / Raymonds / Vimal or

equivalent brand, Colour of tapestry shall be as directed by

Architect/ Site Incharge as per selection/ approval. All polish

work shall be done in Melamine finish by Asian Paints /

Nerolac / Berger. Colour of Polish shall be as directed by

Architect/ Site Incharge as per selection/ approval.

approvals needs to be done for the same, once it's finalized

further quantities to be executed after approval.

10 STUDY TABLE : Providing Material & labour charges for 12.00 NO 13534.00

making 1200 - 1800 mm x 800 - 850 mm Study Table having

depth of 600 mm, (as per attache detail drawing) having

skirting of 75 mm,One no. of Shutters with Louvers having

size of 650 mm x 600 mm . All internal surfaces are covered

with 4 mm thk veneer finish with pu polish. All exposed

surfaces are covered with 4 mm thk Teak Wook Face vineer

finish with pu polish. shutters are made with 19mm+6 mm

marin ply for conceal handles. or as suggested pattern for

handles. External & internal joints covered with 37 mm x

mm teak wood bidding patti complete with melamine

polish.All complete with proper hardwares like conceal socket,

S.S. Screws, Nails, Magnets etc. Sizes and patterns may be

varies as suggested by architect.Table top finish with Artificial

Stone/Quartz as per selection. PU polish / Colour to be done as

per selection. All fixtures and fastning must be approved by

architect/EOI as per given standard make. All Details as per

shown in detail drawings & as per instructions of architect /

incharge engineer. Contractor has to provided all necessary cut

outs for Electrical works & no extra payment shall be made for

it. Please see the Attached Make List for Apporoved Makes.

11 STUDY TABLE : Providing Material & labour charges for 25.00 NO 10312.10

making 900 - 1500 mm x 800 - 850 mm Study Table having

depth of 600 mm, (as per attache detail drawing). All internal

surfaces are covered with 1 mm thk laminate of approved

shade. All exposed surfaces are covered with Laminate finish

as per Architect's c selection..All complete with proper

hardwares like conceal socket, S.S. Screws, Nails, Magnets

etc. Sizes and patterns may be varies as suggested by

architect.Table top finish with Artificial Stone / Laminate as

per selection. All fixtures and fastning must be approved by

architect/EOI as per given standard make. All Details as per

shown in detail drawings & as per instructions of architect /

incharge engineer. Contractor has to provided all necessary cut

outs for Electrical works & no extra payment shall be made for

it. Please see the Attached Make List for Apporoved Makes.

12 Providing and Installation of VIP Study Chair made with teak 12.00 NO 12120.00

wood, all wood work shall be of 1st class seasoned hard wood

(CP teak wood). Plywood : 12-18mm thick BWR phenol

bonded plywood shall be provided,PVC/hard rubber shoe of 1st

quality shall be screwed all legs. Rest all other details &

dimensions as shown in drwgs.

Polyurethane foam shall be 75mm thick (with 32 Kg density

per cubic meter) . UPHOLESTRY : D’ Décor / Neptune /

Raymonds / Vimal or equivalent brand, Colour of tapestry shall

be as directed by Architect/ Site Incharge as per selection/

approval. All polish work shall be done in Melamine finish by

Asian Paints / Nerolac / Berger. Colour of Polish shall be as

directed by Architect/ Site Incharge as per selection/ approval.

Note: Sample approvals needs to be

done for the same, once it's finalized further quantities to be

executed after approval.

13 Providing and Installation of General Study Chair made with 21.00 NO 9140.50

teak wood, all wood work shall be of 1st class seasoned hard

wood (CP teak wood). Plywood : 12-18mm thick BWR phenol

bonded plywood shall be provided,PVC/hard rubber shoe of 1st

quality shall be screwed all legs. Rest all other details &

dimensions as shown in drwgs.

Polyurethane foam shall be 75mm thick (with 32 Kg density

per cubic meter) . UPHOLESTRY : D’ Décor / Neptune /

Raymonds / Vimal or equivalent brand, Colour of tapestry shall

be as directed by Architect/ Site Incharge as per selection/

approval. All polish work shall be done in Melamine finish by

Asian Paints / Nerolac / Berger. Colour of Polish shall be as

directed by Architect/ Site Incharge as per selection/ approval.

Note: Sample approvals needs to be

done for the same, once it's finalized further quantities to be

executed after approval.

14 Providing and Installation of Dining Table made with teak 6.00 NO 26113.55

wood, overall size shall be 1800 - 1950 mm long, 900mm wide

and 750 -800mm high ( As per final drawing). All wood work

shall be of first class seasoned hard teak wood (CP teak wood).

Table Top : Top shall be of 18mm thick Arificial stone /

Marble or Granite as per selection or sample approval.

PVC/hard rubber shoe of 1st quality shall be screwed all legs.

Polish :Expose surface of teakwood shall be polish in natural

wood colour or as approved by Architect or Site In-charge

strictly as per manufacturer’s instructions. Make of Polish shall

be Melamine by Asian Paints / Nerolac / Berger. NOTE :

Entire polish work shall be done in the presence of Engr-in-

Charge at site only. Rest all other details & dimensions as

shown in drwgs. and instruction and drawings by Architect.

Note: Sample approvals needs to be done for

the same, once it's finalized further quantities to be executed

after approval.

15 Providing and Installation of Dining Table made with teak 2.00 NO 39137.50

wood, overall size shall be 1800 - 1950 mm long, 900 -1000

mm wide and 750 -800mm high ( As per final drawing). All

wood work shall be of first class seasoned hard teak wood (CP

teak wood). Table Top : Top shall be of 18mm thick Italian

Marble / Quartz as per selection or sample approval.PVC/hard

rubber shoe of 1st quality shall be screwed all legs. Polish

:Expose surface of teakwood shall be polish in natural wood

colour or as approved by Architect or Site In-charge strictly as

per manufacturer’s instructions. Make of Polish shall be

Melamine by Asian Paints / Nerolac / Berger. NOTE : Entire

polish work shall be done in the presence of Engr-in-Charge at

site only. Rest all other details & dimensions as shown in

drwgs. as per instrcution by Architect.

Note: Sample approvals needs to be done for the same, once it's

finalized further quantities to be executed after approval.

16 Providing and Installation of Dining Table made with teak 12.00 NO 29037.50

wood, overall size shall be 1350 - 1500 mm long, 900 -1000

mm wide or 1200 x1200 mm or 1200 mm Dia Circular and

750 -800mm high ( As per final drawing). All wood work shall

be of first class seasoned hard teak wood (CP teak wood).

Table Top : Top shall be of 18mm thick Italian Marble / Quartz

as per selection or sample approval.PVC/hard rubber shoe of

1st quality shall be screwed all legs. Polish :Expose surface of

teakwood shall be polish in natural wood colour or as approved

by Architect or Site In-charge strictly as per manufacturer’s

instructions. Make of Polish shall be Melamine by Asian Paints

/ Nerolac / Berger. NOTE : Entire polish work shall be done in

the presence of Engr-in-Charge at site only. Rest all other

details & dimensions as shown in drwgs. as per instrcution by

Note: Sample approvals needs to

be done for the same, once it's finalized further quantities to be

executed after approval.

17 Providing and Installation of Dining Table made with teak 8.00 NO 18937.50

wood, overall size shall be Maximum 900 - 1000 mm long,

-1000 mm wide or 800 -900 mm Dia Circular and 750 -

800mm high ( As per final drawing). All wood work shall be of

first class seasoned hard teak wood (CP teak wood). Table Top

: Top shall be of 18mm thick Italian Marble / Quartz as per

selection or sample approval.PVC/hard rubber shoe of 1st

quality shall be screwed all legs. Polish :Expose surface of

teakwood shall be polish in natural wood colour or as approved

by Architect or Site In-charge strictly as per manufacturer’s

instructions. Make of Polish shall be Melamine by Asian Paints

/ Nerolac / Berger. NOTE : Entire polish work shall be done in

the presence of Engr-in-Charge at site only. Rest all other

details & dimensions as shown in drwgs. as per instrcution by

Note: Sample approvals needs to

be done for the same, once it's finalized further quantities to be

executed after approval.

18 Providing and Installation of VIP Dining Chair made with teak 76.00 NO 12877.50

wood, all wood work shall be of 1st class seasoned hard wood

(CP teak wood). Plywood : 12-18mm thick BWR phenol

bonded plywood shall be provided, PVC/hard rubber shoe of

1st quality shall be screwed all legs. Rest all other details &

dimensions as shown in drwgs. FOAM : Polyurethane foam

shall be 75mm thick (with 32 Kg density per cubic meter) .

UPHOLESTRY : D’ Décor / Neptune / Raymonds / Vimal or

equivalent brand, Colour of tapestry shall be as directed by

Architect/ Site Incharge as per selection/ approval. All polish

work shall be done in Melamine finish by Asian Paints /

Nerolac / Berger. Colour of Polish shall be as directed by

Architect/ Site Incharge as per selection/ approval.

approvals needs to be done for the same, once it's finalized

further quantities to be executed after approval.

19 Providing and Installation of General Dining Chair made with 24.00 NO 9090.00

teak wood, all wood work shall be of 1st class seasoned hard

wood (CP teak wood). Plywood : 12-18mm thick BWR phenol

bonded plywood shall be provided, PVC/hard rubber shoe of

1st quality shall be screwed all legs. Rest all other details &

dimensions as shown in drwgs. FOAM : Polyurethane foam

shall be 75mm thick (with 32 Kg density per cubic meter) .

UPHOLESTRY : D’ Décor / Neptune / Raymonds / Vimal or

equivalent brand, Colour of tapestry shall be as directed by

Architect/ Site Incharge as per selection/ approval. All polish

work shall be done in Melamine finish by Asian Paints /

Nerolac / Berger. Colour of Polish shall be as directed by

Architect/ Site Incharge as per selection/ approval.

approvals needs to be done for the same, once it's finalized

further quantities to be executed after approval.

20 Providing and Installation of Conference Table made with teak 1.00 NO 353500.00

wood, " U " shape overall size shall be 6000 - 6600 mm long,

1800-2100 mm wide and 750 -800mm high with wooden

battens framing as per mentioned size with facia patterns with

CNC design. ( As per final drawing). All wood work shall be

of first class seasoned hard teak wood of approved sample.

Table Top : Top shall be of 15-18mm thick Quartz / Corian as

per selection or sample approval.PVC/hard rubber shoe of 1st

quality shall be screwed all legs. Polish :Expose surface of

teakwood shall be polish in natural wood colour or as approved

by Architect or Site In-charge strictly as per manufacturer’s

instructions. Make of Polish shall be Melamine by Asian Paints

/ Nerolac / Berger. NOTE : Entire polish work shall be done in

the presence of Engr-in-Charge at site only. Rest all other

details & dimensions as shown in drwgs. and instrcution by

Note: Sample approvals needs to

be done for the same, once it's finalized further quantities to be

executed after approval.

21 CONFERENCE CHAIR (High Back): Providing and supplying 3.00 NO 20705.00

Conference High back chair the seat & back are made of

1.20cm thick hot pressed plywood upholstered with fabric and

moulded PU foam, together with moulded seat & back covers.

The back foam should be designed with contoured lumber

support for extra comfort. The size of chair 45cmx53cm (Back

side) and 52cmx48cm (seat size). The PU foam should be

moulded with density =45 ± 2 kg/m3 .with One piece armrests.

The armrests are scratch and weather resistant. The permanent

contact mechanism is designed with 360° revolving type, with

pneumatic height adjustment.

22 CONFERENCE CHAIR (Medium Back): Providing and 46.00 NO 12625.00

supplying Conference Low back chair the seat & back are made

of 1.20cm thick hot pressed plywood upholstered with fabric

and moulded PU foam, together with moulded seat & back

covers. The back foam should be designed with contoured

lumber support for extra comfort. The size of chair 45cmx53cm

(Back side) and 52cmx48cm (seat size). The PU foam should

be moulded with density =45 ± 2 kg/m3 .with One piece

armrests. The armrests are scratch and weather resistant. The

permanent contact mechanism is designed with 360° revolving

type, with pneumatic height adjustment.

23 Reception Table: Providing and fixing Reception counter/table 1.00 NO 81345.40

size of 2800 mm-3000 mm L x 700 mm W x 1000 mm H made

out of 18mm Marine Ply as per design inner cladded with

1.0mm thk laminate & the edges to be finished with necessary

mouldings(as per design) and finished with corian sheets etc.

Special 6" drawer to be made with dividers of 12mm BWR

plywood The front of the drawer made out of 19mm BWR

block board finished with 4.0mm veneer, sides 12mm BWR

plywood and bottom to be made of 6mm BWr plywood .The

Facia Jali to be made with Corian CNC design as per drawing

with back light Provision,the drawers and shutters to be

provided with necessary drawer sliding channels,handles,

hinges, locks etc.Wire manager, legrest,Redymade black

powder coated CPU trolly, keyboard tray, tea tray finished with

1.0mm laminate to be provided. 15-18 mm thk Quartz /

Corian with bullnosed moulding (double) to be provided at

counter top, the work should be completed as per specification.

The work to be completed as per specification ,design and

approval of the Architect /EIC as per detailed drawings and

material Selection.

24 Providing & fixing Wooden Puffy / Stool of 450 - 525 mm x 17.00 NO 4262.20

450 - 525 mm of Made from First Class Teak Wood with

decorative legs with Teak wood frame with Ply finished with

PU polish & Seat made with 2" Foam + 1" Super Soft foam,

seat covered / stictched with fabric selection as per drawing and

as directed by Architect / Engineer- in- charge. Please see the

Attached Make List for Apporoved Makes.

25 Providing & fixing Wooden Puffy / Stool of 450 - 525 mm x 12.00 NO 7575.00

450 - 525 mm of Made from First Class Teak Wood with

decorative legs with Teak wood frame & Bottom support

frame with Ply finished with PU polish & Seat made with 2"

Foam + 1" Super Soft foam, seat covered / stictched with fabric

selection as per drawing and as directed by Architect / Engineer-

in- charge. Please see the Attached Make List for Apporoved

26 DOUBLE BED FOAM MATTRESS: Mattress made from 12.00 NO 41364.55

Bonded foam with softy sandwich layer, Foam mattress made

from standard quality bonded foam of 100mm thick with

mm thick softy foam which is from standard make, Both foam

are fix with standard glue with both side kwilted cotton fabric

cover, Bed all edges are stitch with pipeing finish with standard

finishing, Cotton kwilt of Dark colour decorative shade require.

Metress Size : 78" x 8" x 72"

27 DOUBLE BED FOAM MATTRESS: Mattress made from 17.00 NO 28229.50

Bonded foam with softy sandwich layer, Foam mattress made

from standard quality bonded foam of 75mm thick with 50 mm

thick softy foam which is from standard make, Both foam are

fix with standard glue with both side kwilted cotton fabric

cover, Bed all edges are stitch with pipeing finish with standard

finishing, Cotton kwilt of Dark colour decorative shade require.

Metress Size : 78" x 6" x 72"

28 SINGLE BED FOAM MATTRESS: Mattress made from 16.00 NO 14897.50

Bonded foam with softy sandwich layer, Foam mattress made

from standard quality bonded foam of 100mm thick with

mm thick softy foam which is from standard make, Both foam

are fix with standard glue with both side kwilted cotton fabric

cover, Bed all edges are stitch with pipeing finish with standard

finishing, Cotton kwilt of Dark colour decorative shade require.

Metress Size : 78" x 6" x 36"

29 SINGLE BED FOAM MATTRESS: Mattress made from 20.00 NO 11059.50

Bonded foam with softy sandwich layer, Foam mattress made

from standard quality bonded foam of 75mm thick with 25 mm

thick softy foam which is from standard make, Both foam are

fix with standard glue with both side kwilted cotton fabric

cover, Bed all edges are stitch with pipeing finish with standard

finishing, Cotton kwilt of Dark colour decorative shade require.

Metress Size : 78" x 4" x 36"

30 VINEER & TEAK WOOD FINISH KING SIZE BED: 12.00 NO 46020.65

Providing Material & Labour charge for making king size

bed ( Bed Mattress size 72 x 78 inch )having size of 1875 mm

x 2175 mm made up by 19 mm Thk. (double - sandwich)

marine plywood as pheripherial supports at all four sides &

horizontal middle support with all necessary proper solution.

Having 300 -350 mm high base box / leg made with 19 mm

thk marin ply & teak wood legs with all around teak wood

frame with post as per detail drawing. Top of bed is covered by

19 mm thk marine ply & bottom is covered with 9 mm thk

marine ply. Bed corners are supported with 60 to 75mm teak

wood round edje wood support finish with vineer pu polish

.Top & bottom ply of bed & inner side ply is covered with

mm thk laminate. use of teak wood bidding of appropriate size

at each joints All exposed surfaces of bed is covered with

mm thk vineer finished with PU polish. Sizes and patterns

may be varies as suggested by architect. All fixtures and

fastning must be approved by architect/EOI as per given

standard make. Complete with all hardwares like MS Nails &

SS-304 screws etc. All Details as per shown in detail drawings

& as per instructions of architect / incharge engineer. Please see

the Attached Make List for Apporoved Makes.

31 LAMINATE & TEAK WOOD FINISH KING SIZE BED: 17.00 NO 36011.55

Providing Material & Labour charge for making king size

bed ( Bed Mattress size 72 x 78 inch )having size of 1875 mm

x 2025 mm made up by 19 mm Thk. (double - sandwich)

marine plywood as pheripherial supports at all four sides &

horizontal middle support with all necessary proper solution.

Having 300 -350 mm high base box / leg made with 19 mm

thk marin ply & teak wood legs with all around teak wood

frame with post as per detail drawing. Top of bed is covered by

19 mm thk marine ply & bottom is covered with 9 mm thk

marine ply. Bed corners are supported with 60 to 75mm teak

wood round edje wood support finish with Laminate .Top &

bottom ply of bed & inner side ply is covered with 1.5 mm thk

laminate. use of teak wood bidding of appropriate size at each

joints All exposed surfaces of bed is covered with Laminate.

Sizes and patterns may be varies as suggested by architect. All

fixtures and fastning must be approved by architect/EOI as per

given standard make. Complete with all hardwares like MS

Nails & SS-304 screws etc. All Details as per shown in detail

drawings & as per instructions of architect / incharge engineer.

Please see the Attached Make List for Apporoved Makes.

32 LAMINATE & TEAK WOOD FINISH SINGLE BED: 36.00 NO 20200.00

Providing Material & Labour charge for making single bed (

Bed Mattress size 36 x 78 inch ) made up by 19 mm Thk.

(double - sandwich) marine plywood as pheripherial supports

at all four sides & horizontal middle support with all

necessary proper solution. Having 300 -350 mm high base box

made with 19 mm thk marin ply & teak wood legs with all

around teak wood frame with post as per detail drawing. Top of

bed is covered by 19 mm thk marine ply & bottom is covered

with 9 mm thk marine ply. Bed corners are supported with

to 75mm teak wood round edje wood support finish with

Laminate .Top & bottom ply of bed & inner side ply is covered

with 1.5 mm thk laminate. use of teak wood bidding of

appropriate size at each joints All exposed surfaces of bed is

covered with Laminate. Sizes and patterns may be varies as

suggested by architect. All fixtures and fastning must be

approved by architect/EOI as per given standard make.

Complete with all hardwares like MS Nails & SS-304 screws

etc. All Details as per shown in detail drawings & as per

instructions of architect / incharge engineer. Please see the

Attached Make List for Apporoved Makes.

33 BED SIDE TABLE IN VINEER & TEAK WOOD FINISH: 24.00 NO 12811.85

Providing and Installation of Bed Side Table made with teak

wood, all dimension, shape and size shall be shown in drwgs.

All wooden work shall be of 1st class seasoned hard teak wood

with melamine polish/ finish. Top shall be of 18mm thick

Italian/ Arificial stone / Quartz as per selection or sample

approval. Expose surface of teakwood shall be polished in

melamine finish with color tone as approved by Architect / Site

Incharge. Make of Polish shall be Melamine by Asian Paints /

Nerolac / Berger and strictly as per manufacturer’s instructions.

PVC/hard rubber shoe of 1st quality shall be screwed all legs.

NOTE : Entire polish work shall be done in the presence of

Engr-in-Charge at site only. Rest all other details like drawer,

shelves , knob & dimensions/ details as shown in drwgs.

Note: Sample approvals needs to be done for the

same, once it's finalized further quantities to be executed after

34 BED SIDE TABLE IN LAMINATE & TEAK WOOD 38.00 NO 9342.50

FINISH: Providing and Installation of Bed Side Table made

with teak wood, all dimension, shape and size shall be shown in

drwgs. All wooden work shall be of 1st class seasoned hard

teak wood with melamine polish/ finish. Top shall be of 15-

18mm thick Arificial stone / Laminateas per selection or

sample approval. Expose surface of teakwood shall be polished

in melamine finish with color tone as approved by Architect /

Site Incharge. Make of Polish shall be Melamine by Asian

Paints / Nerolac / Berger and strictly as per manufacturer’s

instructions. PVC/hard rubber shoe of 1st quality shall be

screwed all legs. Rest all other details like drawer, shelves

knob & dimensions/ details as shown in drwgs.

Note: Sample approvals needs to be done for the same, once

it's finalized further quantities to be executed after approval.

35 VINEER & TEAK WOOD FINISH DRESSING UNIT WITH 12.00 NO 18937.50

MIRROR: Providing Material & Labour Charges for making

dresssing table having size of 1500 mm x 700 mm & mirror

up to lintal lvl ht as per drawing . MIRROR : 12 mm ply as

base surface for leveling of wall and create framing of teak

wood bidding frame with the carving details shown as per

drawing having size of 35mmx18 mm to fix the 6 mm thk

superior quality mirror up to lintal lvl ht above marine ply

wood, FINISHING :- Exposed surface of table top/ Shelves

finished with 4 mm thk vineer finish with PU polish. Table

contains shelves and drawers as per Drawings and inclusive of

all required hardware items with installation as per instruction

by Architect/ Site in charge.

36 LAMINATES & TEAK WOOD FINISH DRESSING UNIT 29.00 NO 13029.00

WITH MIRROR: Providing Material & Labour Charges for

making dresssing table having size of 1500 mm x 700 mm &

mirror up to lintal lvl ht as per drawing . MIRROR : 12 mm

ply as base surface for leveling of wall and create framing of

teak wood bidding frame with the carving details shown as per

drawing having size of 35mmx18 mm to fix the 6 mm thk

superior quality mirror up to lintal lvl ht above marine ply

wood, FINISHING :- Exposed surface of table top/ Shelves

finished with 1 mm thk laminate finish of approved shade.

Table contains shelves and drawers as per Drawings and

inclusive of all required hardware items with installation as per

instruction by Architect/ Site in charge.

37 VENEER & TEAK WOOD FINISH WARDROBE : 12.00 NO 38380.00

Providing Material & Labour charges for making Wardrobe

having size of 1500-1200mm x 550mm x 2100mm Ht. having a

two nos of drawer unit size of 125mm x 600mm rest on

softclose channels made with 19mm thk marin ply. Bottom of

drawer is made by 12mm thk marine ply. All exposed surfaces

of drawer, study table & open shelves finish with vineer finish

with PU polish. All internal surfaces of drawers are covered

with 1.0 mm thk laminate of aaproved shade. Sizes and patterns

of Shutter finish with sandwich Glass in shutter backing with

Canavas print pasted on it and finished with wooden beading

patti, may be varies as suggested by architect. use of teak wood

bidding of appropriater size at each joints All fixtures and

fastning must be approved by architect/ EOI as per given

standard make like locks, S.S. Screws, MS Nails,

handles,magnet, hanger rod etc. All Details as per detail

drawings & as per instructions of Architect/ incharge engineer.

38 LAMINATE FINISH WARD ROBE: Providing Material & 35.00 NO 27775.00

labour charges for making 1200 - 1500 mm x2100 mm / Lintel

Height wardrobe having depth of 600 mm, (as per attached

detail drawing) having skirting of 75 mm, two nos of drawers

having size of 600 mm x 175 mm x 550 mm deep, rest on

telescopic channels. Ward robe Body & Inside shelves made

by 19 mm Thk. marine plywood. Back ply of ward robe is

mm marine ply. Drawers are made by 19 mm ply & bottom of

drawer is made by 9 mm marine plywood. All exposed &

internal surfaces are covered with 1 mm thk laminate of

approved shade. shutters are made with 19mm+6 / 25mm mm

marine ply with required patter and size as per drawings and

digital printed laminate to be installed based on design

requirement. or as suggested pattern for handles. External &

internal joints covered with 37 mm x 12 mm teak wood

bidding patti complete with melamine polish. All complete

with proper hardwares like locks for shutters, 25 mm dia ss

pipe with conceal socket, S.S. Screws, Nails, Magnets, handles

for drawers, etc. Sizes and patterns may be varies as suggested

by architect. All fixtures and fastening must be approved by

architect/EIC as per given standard make. All Details as per

shown in detail drawings & as per instructions of architect / in

charge engineer. Contractor has to provided all necessary cut

outs for Electrical works & no extra payment shall be made for

it. Please see the Attached Make List for Approved Makes.

39 Providing & fixing Wooden Console Unit at Vestibule size of 5.40 SMT 18730.45

Made from First Class Teak Wood & finished with veneer /

wooden with decorative legs and top as artificial stone/quartz

finish inclusive of all required drawers / shelves finished with

PU polish including all necessary hardware of approved make

& as per selection / detailed drawing and as directed by

Architect / Engineer- in- charge. Please see the Attached Make

List for Apporoved Makes.

40 Suppy and Installtion of TV unit with Drawer/Cabinet - made 27.72 SMT 21210.00

up with 19mm Marine Waterproof ply backing with 3mm ACP

sheet on wall & top surface of entire drawer unit to be finished

in 6-8mm thick Corian Surface as per selection. Edges biddings

& frictional faces are with (Thick Teak Wood beadings) finish

melamine over it with 3 drawer with telescopic roller channels

including profile shutter and inside finished with 1mm

laminate with all necessary hardware as per selection. LED TV-

Back side wall paneling with plywood structure with 25mm gap

for passing the cables. covered textured Charcoal or ASA /

PVC 3-4 sheet. 2 coats of fine melamine polished on all visible

wooden moulding and CNC Thambhli and Arches as per size

specified in detail drawings and design. Material selection

should be as per engineer in charge and Architect. Note: TV

unit size should be calculated out to out sq.mt. area for

measurement, no additional payment to be considered

separately for anything.

41 Suppy and Installtion of TV unit with Drawer/Cabinet - made 27.72 SMT 16665.00

up with 19mm Marine Waterproof ply backing with 3mm ACP

sheet on wall & top surface of entire drawer unit to be finished

in 4mm thick Veneer or 15mm thick Artificial Stone as per

selection. Edges biddings & frictional faces are with (Thick

Teak Wood beadings) finish melamine over it with 3 drawer

with telescopic roller channels including profile shutter and

inside finished with 1mm laminate with all necessary hardware

as per selection. LED TV- Back side wall paneling with

plywood structure with 25mm gap for passing the cables.

covered textured Charcoal or ASA / PVC 3-4 sheet. 2 coats of

fine melamine polished on all visible wooden moulding and

CNC Thambhli and Arches as per size specified in detail

drawings and design. Material selection should be as per

engineer in charge and Architect. Note: TV unit size should be

calculated out to out sq.mt. area for measurement, no additional

payment to be considered separately for anything.

42 Supply & Installation of Tv unit with Drawer made up with 105.00 SMT 11110.00

19mm ply and 1mm laminate on all faces. Edges biddings &

frictional faces are with 8-10mm (Thick Teak wood beadings)

finish melamine over it. LED TV- Back side wall paneling with

ACP 3mm sheet back with plywood structure with 25mm gap

for passing the cables. covered textured Charcoal / PVC / other

sheet as per selection as per size specified in detail drawings

and design . 2 coats of fine melamine polished on all visible

Wooden moulding, edges and CNC Thambhli support as per

size specified in detail drawings and design. Material selection

should be as per engineer in charge and Architect. Material

selection should be as per engineer in charge and chief

architect. Note: TV unit size should be calculated out to out

sq.mt. area for measurement, no additional payment to be

considered separately for anything.

43 Providing & fixing C / L shaped Pelmet up to 230 - 350 mm 25.20 RMT 6610.45

made wide from 18 mm thick marine plywood conforming to

IS: 710 finishing front side with 4 mm thick veneer and First

class teak wood beading finished with PU polish as per material

selection done by Architect. , back side / unseen surface

finished with 1mm wooden finish laminate supporting to wall

with necessary support arrangement from ceiling / wall and

screws etc. all complete, as per drawing and as directed by

Architect / Engineer- in- charge. (Elevation area will be

measured for payment purpose.)

44 Providing & fixing C / L shaped Pelmet up to 300 - 450 mm 92.00 RMT 3327.95

made wide from 18 mm thick marine plywood conforming to

IS: 710 finishing front & all exposed suraface finish with

laminate as per selection and First class teak wood beading

,back side / unseen surface finisehd with 1mm wooden finish /

white laminate supporting to wall with necessary fixing support

arrangement from ceiling / wall and screws etc. all complete,

as per drawing and as directed by Architect / Engineer- in-

charge. (Elevation area will be measured for payment purpose.)

45 Providing and making VENEER / WOOD finish false ceiling 91.70 SMT 7650.75

using 12 mm BWP grade IS 710 plywood cladded with 4mm

thick decorative veneer with required wooden battens with

support framing and finished with moulding/ cornice patti

made of teak wood of approved pattern/ design & including all

hardware fixtures and fasteners, S.S. screws, grips and as per

design, pattern, shapes and levels specified in detail drawings

including two coats of PU polish of approved make. Complete

as per Architect's instructions & sized specified in detail

drawings and as per deign.Material selection should be as per

Engineer in charge and Architect.

46 Providing and making STRETCH CEILING false ceiling 36.00 SMT 6060.00

using box frame of 18 mm BWP grade IS 710 plywood cladded

with internal White Paint finish in approved pattern &

including all hardware fixtures and fasteners, S.S. screws, grips

and as per design, pattern, shapes and levels specified in detail

drawings including LED lights approved makes and fixing of

approved make. Complete as per architect's instructions & sized

specified in detail drawings.Material selection should be as per

engineer in charge and architect.

47 Providing and making PVC FALSE CEILING FOR 159.79 SMT 1111.00

WASHROOMS using 8mm thick Panel Size of 250mm Wide x

3000 mm Length with wooden or approved Shade and

pattern & including all hardware fixtures and fasteners, S.S.

screws, grips & Conrner angles including necessary framework

wheerever required and as per design, pattern, shapes and

levels specified in detail drawings including cutting for light

fixtures. Complete as per architect's instructions & sized

specified in detail drawings.Material selection should be as per

engineer in charge and architect.

48 Providing and fixing suspended Plain Gypsum Board False 2009.23 SMT 969.60

Ceiling system comprising single layer 12.5 mm thick Gyproc®

Glasroc H waterproof gypsum ceiling board fixed on

GypSerra™ GI framework consisting of perimeter channels,

ceiling angles, intermediate channels and ceiling sections made

from galvanized steel sections conforming to IS standards,

suspended from RCC slab/soffit using soffit cleats, anchor

fasteners and suspension system complete as per

manufacturer’s specifications.

The framework shall consist of serrated GI sections with

galvanized coating, providing enhanced load carrying capacity,

screw holding strength, acoustic performance and fire

resistance. Ceiling sections shall be fixed at specified spacing

with connecting clips and self-drilling drywall screws. All

joints shall be treated with approved jointing compound,

paper/fiber tape, filling and sanding to achieve smooth seamless

finish ready for paint.

The work shall include perimeter fixing, suspension

arrangement, cut-outs for services, light fixtures, AC grilles,

access panels, grooves, bulkheads, edge profiles, scaffolding,

all GI accessories, hardware, fasteners, labour, materials,

installation and making good complete in all respects as per

approved drawings, manufacturer’s specifications and direction

of Engineer-in-Charge & Architect.. Screw fixing is done

mechanically either with screw driver or drilling machine with

suitable attachment. Finally square and tapered edges of the

GRC / are to be jointed

GYPSUM and finished so

POLYSTYRINE as to have at

CORNICE a flush look

CEILING: 475.20 RMT 757.50

Providing & fixing GRC or Gypsum Polystyrince Decorative

Cornice / Strips 4" to 8" in width and length as per availability

& as per Selection and approvd with Architect & Site Engineer

/ Site In-charge ,Screw fixing is done mechanically either with

screw driver or drilling machine with suitable attachment.

Finally square and tapered edges of the boards are to be jointed

and finished so as to have a flush look which includes filling

and finishing with Jointing compound/ chemical and Joint

Paper tape (as per recommended practices of Saint- Gobain

Gyproc India) including cost of required Cut-Outs, finishing

items /Scaffolding, and for all heights as per complete as per

instruction of Engineer-in charge and Architect.

50 Providing and fixing as per approved make 170.28 SMT 2196.75

Roller/Zebra/Roman curtain as suggested fabric . Fabric with

manual operation and warranty etc as per manufacturer’s

specifications. Fabric to be as per approved sample. All the

work complete as per the detailed drawing and instruction of

Architect/Client. (Contractor shall provide treated conceal

channel complete in all respects on which all curtains shall be

fixed and should also take load of all the manual curtains). All

complete as per approval of designer & instruction.Work

completed as per the detailed drawing and instruction of

Architect/Client. Height will be measured from top of the

conceal channel to floorm top/sill bottom lvl and clear opening

size only there will be not extra payment towared overlaping.

51 Providing and fixing as per approved make Arabian curtain as 70.56 SMT 2509.85

suggested fabric . Fabric with manual operation and warranty

etc as per manufacturer’s specifications. Fabric to be as per

approved sample. All the work complete as per the detailed

drawing and instruction of Architect/Client. (Contractor shall

provide treated conceal channel complete in all respects on

which all curtains shall be fixed and should also take load of all

the manual curtains). All complete as per approval of designer

& instruction.Work completed as per the detailed drawing and

instruction of Architect/Client. Height will be measured from

top of the conceal channel to sill bottom lvl and clear opening

size only there will be not extra payment towared

overlaping.Fabric Selection as per approved make list.

52 Providing and fixing as per approved make Shear curtain as 70.56 SMT 1590.75

suggested fabric . Fabric with manual operation and warranty

etc as per manufacturer’s specifications. Fabric to be as per

approved sample. All the work complete as per the detailed

drawing and instruction of Architect/Client. (Contractor shall

provide treated conceal channel complete in all respects on

which all curtains shall be fixed and should also take load of all

the manual curtains). All complete as per approval of designer

& instruction.Work completed as per the detailed drawing and

instruction of Architect/Client. Height will be measured from

top of the conceal channel to floorm top/sill bottom lvl and

clear opening size only there will be not extra payment towared

overlaping.Fabric Selection as per approved make list.

53 Veneer/ Wooden finish wall paneling : Providing & Fixing wall 93.12 SMT 7322.50

paneling made 12-18 mm Marine Ply fixing on wall back

cladding done with ACP sheet with required framing & Facia

& Edges finish with 4 mm Thick Veneer both vertically &

horizontally finished with groove pattern and design completed

finished with PU polish as directed by EIC / Architect as per

the sample approved by the Architect.

54 Wall Panelling Ply + MDF Sheet : Providing & Fixing wall 86.24 SMT 4090.50

paneling made from 12mm thk Marine plywood ( IS:710 )

grade with back cladding of 3-4 mm ACP sheet fixed level on

wall with necessary hardware & Facia / Front Cladding with

to 9 mm Thick HDHMR Marine MDF Board with Chemical

Jointing Comppund of approved make finished with groove

pattern With TOP & Side Edges Covered with MDF Beading

Patti as per detailed Drawings and design completed finish as

directed by EIC / Architect as per the sample approved by the

55 PVC Fluted Panel Wall Panelling : Providing & Fixing wall 165.42 SMT 4090.50

paneling made from 12mm thk Marine plywood ( IS:710 )

grade with back cladding of 3-4 mm ACP sheet fixed level on

wall with necessary hardware & Facia / Front Cladding with

10 to 12 mm Thick PVC Fluted Panel Patta of approved make

finished with groove pattern With TOP & Side Edges Covered

with Teak Wood Beading Patti as per detailed Drawings and

design completed finish as directed by EIC / Architect as per

the sample approved by the Architect.

56 Providing and fixing approved quality Wooden CNC Carved 153.60 RMT 3585.50

Patta/Decorative moulding approx size in width is 5-7 inches

on wall, made from seasoned Teak Wood backing with ACP

Sheet on back side of approved size and profile as per design

selection, including CNC carving, necessary screws, adhesives,

hardware, alignment, sanding, staining and PU polish finish

complete in all respectsas per detailed Drawings and design

completed finish as directed by EIC / Architect as per the

sample approved by the Architect.

57 Providing and fixing approved quality Wooden CNC Carved 143.60 RMT 1363.50

Decorative moulding approx size in width is 2-3 inches on

wall, made from seasoned Teak Wood backing with ACP Sheet

back side of approved size and moulding profile as per design

selection, including CNC carving, necessary screws, adhesives,

hardware, alignment, sanding, staining and PU polish finish

complete in all respectsas per detailed Drawings and design

completed finish as directed by EIC / Architect as per the

sample approved by the Architect.

58 Veneer Finish Box Ceiling Patta with Wooden Decorative 36.00 NO 5812.55

Bracket : Providing Material & Labour charge for making

Ceiling Box Patta / Bend Panelling of size 100 - 100 mm or

100-150 mm considering 18 mm marine ply & finished with

04 mm thk Veneer on Box length approx 1800 - 2000mm and

both side Wooden Decorative Brackets L Shape approx size of

300 x 350 mm made in Seasoned teak wood as per CNC

Carbed design & Pattern provided in Detail drawings and as

per material selection. Finishing with all necessary hardwares

& PU polish etc. as per details given in drawing and as per

instructions of Architect/Engineer In charge.

Note: Sample approvals needs to be done for the same, once

it's finalized further quantities to be executed after approval.

59 Providing & fixing of Wooden Bracket made from First Class 36.00 NO 4595.50

Teack wood with CNC / Handmade Carved design sixe of 300 -

450 mm L shape fixing on wall / support with ceilig including

all necessary supports and hanrdware. The bracket to be

finished with PU polish as per required natural shade. The item

to be completed in all respect as per the direction and detailed

drawings and the sample approval done by the Architect / EIC.

60 Cassate Unit Box: Providing Material & Labour charge for 12.00 NO 9549.55

making Cassate Unit Box of size 900 - 1200 mm x 100-

150mm considering 12 - 18 mm HDHMR / BWP MDF in

desired cornice and beading/ moulding CNC design & Pattern

provided in Detail drawings and Material Selection. Finishing

with all necessary hardware etc. as per details given in drawing

and as per instructions of Architect/Engineer In charge.

Note: Sample approvals needs to be done for the

same, once it's finalized further quantities to be executed after

61 Providing and fixing approved quality Wooden CNC Carved 118.80 RMT 4040.00

Patta/Decorative moulding at Ceiling approx size in width is 5-

7 inches maximum with required ply backing supports in

ceiling with necessary arrangements, made from seasoned Teak

Wood of approved size and profile as per CNC design

selection, including CNC carving, necessary screws, adhesives,

hardware, alignment, sanding, staining and PU polish finish

complete in all respectsas per detailed Drawings and design

completed finish as directed by EIC / Architect as per the

sample approved by the Architect.

62 Providing and fixing approved quality Wooden CNC 232.80 RMT 2020.00

Decorative moulding at Ceiling approx size in width is 1.5-2

inches on Ceiling with required ply backing supports in ceiling

with necessary arrangements, made from seasoned Teak Wood

of approved size and profile as per CNC design selection,

including CNC carving, necessary screws, adhesives, hardware,

alignment, sanding, staining and PU polish finish complete in

all respectsas per detailed Drawings and design completed

finish as directed by EIC / Architect as per the sample approved

by the Architect.

63 Providing and fixing Wooden CNC cut / Carved moulding 167.20 RMT 3484.50

Thambhali with Shelves finish in Venner & Teak wood

beading as per design in size variable from 75 to 100 mm Size

(as per dwg) fixed with proper architectural joinery and with

required accessorries with PU Polish finish. All

suppliying,making,fixing as detail design ,shape as showing in

drg , over all briefing as above,the rate are including with all

Supporting material , hardwares,wastage and complete work to

be done as directed by Architect / EIC (Running length will be

measerd for payment purpose.)

64 Veneer / Wooden Finish Designer Partition: Providing and 31.80 SMT 18437.55

fixing full height / half height double skin wooden partition

upto ceiling or beam bottom as per drawing and framing in

plywood with both side cover with 12mm thick Marine ply

finished both Side with 4.0mm thick selected Veneer, without

any air gap and grooving as per design including wooden

beading, cornice, Thabhli, decorative wooden articles &

finished with natural PU polish as instruction of the

EIC/Architect. Wooden framing to be erected above false

ceiling make hole/face plate for conduit pipes of electrical /

networking cables with openable stud from partition if requied

anywhere Including all materials and labour etc. Open edges

also finish with Veneer complete as per detail drawing and

instruction of Architect/engineer-in charge.

65 Providing and fixing Wall Mounted Basin Counter/Platform 6.00 NO 17170.00

made from 19 mm thick BWP Grade Waterproof Plywood

(IS:710) with ACP cladding backside and finished top in 15–18

mm thick Artificial Marble / Engineered Quartz Stone

including machine polished edges, cut-outs, grooves and

sealing complete. The counter shall be fixed to wall using

heavy duty powder coated MS / SS brackets with necessary

anchoring arrangement and structural support. Front fascia and

all exposed surfaces shall be finished with minimum 2 mm

thick ASA Sheet or equivalent UV, moisture and scratch

resistant decorative finish. Item shall include drawer/storage

box unit with required hardware fittings, telescopic channels,

hinges, handles, internal laminate finish, edge banding, sanitary

silicone sealing, all accessories, fixtures, labour, materials,

transportation, installation and making good complete as per

approved drawings and direction of Engineer-in-Charge &

66 Providing and fixing Wall Mounted Basin Counter/Platform 6.00 NO 20200.00

made from 19 mm thick BWP Grade Waterproof Plywood

(IS:710) with ACP cladding back side and finished top in 8–10

mm thick Corian or 15mm Quartz Stone including machine

polished edges, cut-outs, grooves and sealing complete. The

counter shall be fixed to wall using heavy duty powder coated

MS / SS brackets with necessary anchoring arrangement and

structural support. Front fascia and all exposed surfaces shall

be finished with minimum 6 mm thick Corian sheet, moisture

and scratch resistant decorative finish. Item shall include

drawer/storage box unit with required hardware fittings,

telescopic channels, hinges, handles, internal laminate finish,

edge banding, sanitary silicone sealing, all accessories, fixtures,

labour, materials, transportation, installation and making good

complete as per approved drawings and direction of Engineer-

in-Charge & Architect.

67 Providing, fabricating, supplying and installing Fridge Unit 12.00 NO 18180.00

Box/Cabinet made from 18 mm thick BWR Grade Plywood

conforming to IS standards, including necessary internal

wooden framework in approved hardwood/steam beech wood,

complete as per approved design and drawings. The external

visible surfaces shall be finished with approved natural wood

4mm thick veneer with PU polish finish of approved shade and

texture, including necessary edge polishing and protective

coating. The unit shall be provided with louvered shutters made

from plywood and solid wood framing as per approved design

to ensure proper ventilation for refrigerator operation.

The work shall include necessary cut-outs, ventilation

openings, grooves, service access panels, backing supports,

skirting, edge banding and all required hardware fittings such

as SS hinges, handles, magnetic catchers, screws and

accessories of approved make complete. Internal surfaces shall

be finished with 1mm thick laminate as specified & as per

approved drawings and direction of Engineer-in-Charge.

68 Providing, fabricating, supplying and installing Partition made 54.00 SMT 11110.00

with powder coated / anodized aluminum framing of approved

sections, sizes and thickness, securely fixed to floor, wall and

ceiling with necessary anchor fasteners, cleats and supports

complete as per approved drawings and details. The framework

shall be clad with 10-12 mm thick Glassrock / waterproof grade

gypsum board fixed over required 12 mm thick BWR grade

Waterproof plywood backing using self-drilling screws and

approved fixing system complete.

The partition shall include necessary cut-outs , niche design,

recessed designer niches, openings, grooves and edge profiles

as per approved drawings and design details. All board joints

shall be treated with approved jointing tape, jointing

compound, putty finish and sanding complete to achieve

smooth and even surface ready for final finish. Necessary

internal reinforcements shall be provided wherever required for

stability and fixing of accessories as per approved drawings and

direction of Engineer-in-Charge & Architect.

69 Providing, fabricating, supplying and installing decorative 6.00 NO 11009.00

Wooden Carved Jharokha made from seasoned first class Teak

Wood of minimum 50–60 mm thickness in approved profile

and design, manufactured using CNC carving with additional

hand finishing wherever required, complete as per approved

drawings and sample. The approximate size of the Jharokha

shall be 750 x 900 mm or as specified.The item shall include

carved mouldings, ornamental profiles, arch detailing, side

borders, back support frame and necessary structural

strengthening complete. All exposed wooden surfaces shall be

machine sanded and finished with PU polish of approved shade

and finish including wood filler, stain, sealer and protective

coating complete. The Jharokha shall be fixed to wall with

necessary teak wood backing, MS cleats, screws, anchor

fasteners and fixing accessories as required complete in all

respects as per approved drawings, sample and direction of

Engineer-in-Charge & Architect.

70 Providing and applying 1mm-2mm thick trowel finish Wall 637.60 SMT 863.55

Texture (Earthen)- A special multi-coloured combination of

specific coated stones or sand in a 4-coat system- 1 coat of base

primer (50µm-60 µm) of required colour (Earthen) as approved

by the architect/engineer in-charge by Brush/Roller, 1 coat of

Terre Granules (0.8mm to 1.2mm) thickness(Earthen) with

steel trowel, 1 coat of clear matt/gloss finish top coat(30µm-

Above application is to be carried out on the single/double coat

smooth mala plaster.

Note: Sample approvals needs to be done for the same,

once it's finalized further quantities to be executed after

71 Providing Material & Labour charge for pasting of Non 472.60 SMT 1212.00

Wooven Customised Wallpaper having featurers of scratch

proof, perfect finish, long lasting finish, having artistic appeal

& intricate patterns, which are easy to fix on walls with exotic

looks, having thickness of 0.2mm & roll size of 1300mm width

or any size as per selection, as selected by the Architect &

Engineer Incharge. Comlete with all necessary adhensives, etc

as instructed by the Architect & Engineer Incharge. Samples

should be approved by the Architect & Engineer Incharge.

Please see the Attached Make List for Apporoved Makes.

72 Low height Storage- Providing and fixing stoarge units of full 4.57 SMT 8170.90

height as per drawing. They shall consist of 19mm thick

plywood top, sides, back, bottom, shelves and shutters. The

bottom of the storages shall be at 100mm from FFL. The top of

storages shall be 1000mm ht. The shutter shall be fixed with

Nos. 100 mm long stainless steel hinges of aaproved make &

teak wood lipping finished with melamine polish & laminate of

approved shade with on all the shutter and shelf facias.

Division of the shutters shall be made equally according to the

length of the storage. All the external surfaces shall be finished

with 1.0mm thick. Laminate of approved make 19mm thick.

Ply shelves removable type supported on side teak wood

battens on both sides. All inner surfaces shall be finished with

0.8mm laminate on all sides including the shutters inclusive of

all necessary approved fittings like hinges, locks, SS brushed

finish handles, tower bolts, locks and any necessary hardware

items as per sized specified in detail drawings. Material

selection should be as per engineer in charge and chief architect.

73 TEXTURE PAINT : Providing & applying a coat of textured 300.00 SMT 631.25

cement finish on walls and columns. The rate shall include

scrapping, levelling & preparing the surface. Primer coat +

(minimum) 3 coats of paint of approved make, quality & shade.

completed as directed by Project manager / Architect.( Basic

Cost Rs 45/- Per Sft )

74 Providing, preparing and applying 13 mm thick (average) 432.00 SMT 378.75

premixed formulated one coat gypsum lightweight plaster

Gyproc Elite MR Wall Punning having light weight aggregates

of expanded Perlite and other special additives conforming to

IS: 2547 both Part I & II - 1976 which is certified by Green Pro

& GRIHA for green buildings and delivering a coverage of 21-

22 sft/25kg bag @ avg thickness of 13 mm and having a setting

time between 20 to 25 mins applied directly on background

such as brick/ block/ RCC, on internal walls & ceiling at all

floors and locations, finished in smooth line and level, free of

undulations and cracks. Also providing and fixing Glass fiber

mesh @ 150 mm wide to junctions of concrete and masonry as

recommended by Saint-Gobain Gyproc. The rate shall include

scrapping, leveling and preparing the surface. The rate shall be

inclusive of all types of grooves above the skirting, around the

window and door frames. completed as directed by EIC /

75 Wall Paint: Wall painting (two coats) with plastic emulsion 849.60 SMT 89.26

paint of approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth and colour approved by Architect.

76 Ceiling Paint: Wall painting (two coats) with plastic emulsion 2087.52 SMT 94.17

paint of approved brand and manufacture on undecorated

Ceiling surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth and colour approved

77 Wall Paint: Wall painting (two - three coat) as standard finish 586.20 SMT 186.85

with PU Enemal paint of approved brand and manufacture on

undecorated wall surface to give an even shade including

throughly brushing/spraying the surface free from mortar

droppings and other foreign matter and sand papered smooth

and colour approved by architect.

78 Providing and Installation of Wooden Ottoman / Diwan / 6.00 NO 12670.45

Bench made with teak wood, all wood shall be of first class

seasoned hard wood teak (CP).Legs shall be of 70mmx35mm

in section made to shape as shown on drg. Wooden arm shall

be made to shape out of 35mmx70mm in section teakwood.

Front and side rails shall be of 35mmx100mm in section

teakwood.40mmx40mm in section teakwood bearers shall be

provided at the bottom of seatcover over which 50mm x20mm

wooden battens, shall be fixed equally spaced in the long

pieces. Back shall be made of frame of rails and styles of

70mmx35mm in section teakwood.

79 Supply and installation of non-asbestos Cement Fiber Board 192.50 SMT 1100.90

False Ceiling using approved make 6/8 mm thick cement fiber

boards fixed on heavy-duty galvanized iron (GI) framework

with minimum 120 GSM zinc coating, including GI perimeter

channels, ceiling sections, suspension system, anchor fasteners,

self-drilling screws, joint treatment, cutting, edge finishing,

scaffolding, labour, and all necessary accessories complete.

Boards shall be moisture resistant, fire resistant, dimensionally

stable, smooth finished, and conforming to relevant IS

standards. The work shall be executed in proper line, level, and

alignment complete as per approved specifications and

directions of Engineer-in-Charge.

80 WOODEN FINISH DOOR FRAME PANELING: Providing 592.50 RMT 2727.00

Material & Labour charge for making Door Frame Panelling

Both side inside and Outside door as per Drawings and

Detailing provided of size 900 - 1200 mm x 2100 mm

considering both side by 9 mm marine ply & finished with 12-

25 mm thk teak wood finished with PU polish. All frame made

by teak wood bidding and door patterns with inlay wooden

beading or CNC design as per drawings and provided details.

Finishing with all necessary hardwares etc. as per details given

in drawing and as per instructions of Architect/Engineer In

Note: Sample approvals needs to

be done for the same, once it's finalized further quantities to be

executed after approval.

81 Providing Material & Labour charge for making Veneer Finish 31.00 NO. 21715.00

Wooden Flush Door (finished size of door is approx 50 mm)

Marine Waterproof Grade of size 900 - 1000 mm x 2100 mm

considering waterproof flush door sheet of 30 mm thickness

covered both side by 6 mm marine ply & finished with 4 mm

thk vineer finished with PU polish on both sides of shutter

supprted by SS -304 finish hinges. All exposed framing of

mm made by teak wood bidding and door patterns with inlay

wooden beading or CNC design as per drawinfs and provided

details complete with PU polish. Finishing with all necessary

hardwares like handles, conceal mortise locks, cylinders with 4-

6 nos of keys, stopers,tower bolt,MS nails, SS-304 screws etc.

as per details given in drawing and as per instructions of

Architect/Engineer In charge. Please see the Attached Make

List for Apporoved Makes. Note: Sample approval to be done

prior execution of other quantities as per site requirements.

82 Providing Material & Labour charge for making Veneer Finish 21.00 NO. 18180.00

Wooden Flush Door (finished size of door is approx 50 mm)

Marine Waterproof Grade of size 900 - 1000 mm x 2100 mm

considering waterproof flush door sheet of 30 mm thickness

covered one side by 6 mm marine ply & finished with 4 mm

thk vineer finished with PU polish & other side 4mm exterior

grade ACP Sheet finished shutter supprted by SS -304 finish

hinges. All exposed framing of 12 mm made by teak wood

bidding and door patterns with inlay wooden beading or CNC

design as per drawinfs and provided details complete with PU

polish. Finishing with all necessary hardwares like handles,

conceal mortise locks, cylinders with 4-6 nos of keys,

stopers,tower bolt,MS nails, SS-304 screws etc. as per details

given in drawing and as per instructions of Architect/Engineer

In charge. Please see the Attached Make List for Apporoved

Makes. Note: Sample approval to be done prior execution of

other quantities as per site requirements.

83 Providing, fabricating and fixing Wooden name plate of size as 4320.00 SQ.Inc 50.50

per drawing, comprising 12–18 mm thick PU-polished wooden h

base and CNC-cut 4–5 mm thick brass/golden finish raised

letters fixed with concealed brass/SS studs and epoxy adhesive,

including all accessories, complete as per approved design and

direction of Engineer-in-Charge.

84 Providing and fixing approved quality 5 mm thick mirror with 54.00 NO. 2525.00

seasoned teakwood/hardwood frame approx size of 450 x

mm maximum , wooden beading, 6 mm BWP plywood

backing, complete with PU polished finish, fixing hardware,

and installation, as per approved design, drawings and direction

of Archtect /Engineer-in-Charge.

85 Providing and fixing wall mirror with 5 mm thick copper-free 12.00 NO. 6565.00

mirror glass enclosed in SS-304 frame of minimum 1.2 mm

thickness having PVD brass/golden finish approx size of 750 x

900 mm, complete with BWP plywood/HDHMR backing,

concealed fixing arrangement, hardware, fabrication, polishing

and installation, as per approved design and direction of

Engineer-in-Charge.

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen in figures

And words) of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 3,17,78,249.35 Estimated Amount Put to tender

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Bidder

Divisional Accountant

Dang ( R&B) Division,

Executive Engineer,

Dang ( R&B) Division,