Repair and maintenance of Qtr. No. HL-08 near dispensary at Chirimiri OCP

Amount

Item Description

Providing high impact Polypropylene reinforced cement 6 mvm thick corrugated sheets to any pitch and fixing with polymer coated J, or L hooks. 14871) roofing up bolls and nuts 8 mm dia. G.1. plain and bitumen washers or with self drilling fastener and EPDM washers etc complete (excluding the cost of purlins, rafters and trusses). including cutting sheets to size and shape.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows. including ISI marked MS. pressed bult hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood. 35 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening fou panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Kiln seasoned and chemically treated hollock wood

Brick work with common bumt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level up to floor V level in all shapes and sizes in. Cement mortar 1:6 (1 cement: 6 coarse sand).

12 mm cement plaster of mix: 1:6 (1cement: 6fine sand)

Cement concrete flooring 1.2.4 (1cement: 2coarse sand 4graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing G.I. pipes complete with G.L. fittings including trenching and refilling etc. Extemal work: 15 mm dia nominal bore

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. Including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws etc.

Providing and fuxing white vitreous china water closet squatting pan (Indian type): Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap

Disposal of building rubbish / malba similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Total impact of GST for the purpose of CTC

ELECTROLIES

RAHUL BHAI PATEL

ANAND TRADERS