SEOP 26/2021-22

Amount

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work in in Foundation and plinth.

Brick work using common burnt clay building bricks in Cement mortar 1 : 6 ( 1 cement : 6 Sand ), Second Class Bricks in super-structure above plinth level upto floor two level (First Floor) (Second Class Bricks )

Half brick masonry in common burnt clay building bricks in Cement mortar 1 : 4 (1 cement : 4 Sand ), in superstructure above plinth level up to floor two level, (Second Class Bricks)

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering ,shuttering, strutting and propping etc with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for in-situ- reinforced concrete and plain concrete work in

Columns , pillars , post and struts, Squares, rectangular and polygonal in plan.

Flats surfaces such as soffits and suspended floors, roofs landing and the like, floors etc. upto 200 mm in thickness.

Edges of slabs and breaks in floors and walls, Under 20 cm wide

Stair cases with sloping or stepped soffits excluding landing.

Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in :-

Suspended floor roofs, landing and shelves and their support, balconies, beams, girders, bressumers & cantilever upto floor two level (Ground Floor)

Columns, pillars, posts and struts upto floor two level (Ground Floor)

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.

Providing mild steel/Tor steel reinforcement for R.C.C work including bending, binding and placing in position complete upto floor two level Tor Steel

Providing woodwork in frames of doors,windows, clerestory, windows and other frames wrought,framed and fixed in position. Sal wood.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.35 mm thick, 2nd class deodar wood.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 2nd class deodar wood.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size)

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws.-Plain grill.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc complete. 250x16 mm

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc complete.

Providing and fixing aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing 100 mm bright finished brass floor door stopper with rubber cushion screws etc to suite shutter thickness complete.

Providing and fixing bright finished hard drawn hooks and eyes 100 mm

Providing and fixing 19mm thick commercial board water proof shutters for cup boards i/c fixing with nickel plated piano hines with screws etc.complete

Providing and laying Duro stone vetrified tiles(600x600mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and laying Duro stone vetrified tiles 300 x 300 x 10 mm (Kajaria/Nitco/Varmora make) in grey/coloured in skirting, risers of steps and dados on 12 mm thick cement mortar 1 : 3 ( 1 Cement : 3 Sand ) laid over and jointed with neat cement slury finished with flush pointing in white cement mixed with pigment to match the shade of tiles as required complete.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete 100 mm dia pipe.

Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 100 mm dia

Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In trusses and trussed purlins in buildings.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separately.

6 mm Cement Plaster to ceiling in cement mortar 1 : 4(1 cement : 4 sand)

15 mm Cement Plaster in single coat on rough side of brick/stone masonry for interior plastering including arrises, internal rounded angels, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1 : 6 (1 cement : 6 sand)

15 mm Cement Plaster in single coat on fair side of brick/concrete/stone walls for exterior plastering including arrises, internal rounded angels, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1 : 6 (1 cement : 6 sand)

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Distempering two coat with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with :Readymixed primer

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with ready mixed paint other than white

Proving under layer for plinth protection of 75 mm thick (unconsolidated ) bed dry brick/stone aggregate 40 mm nominal size will rammed and consolidated and grouted with fine sand including preparation of ground.

Providing plinth protection 50 mm thick in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size)

Constructing course rubble hammer dressed "U" shape open surface drain with side wall 15 X 22 cm in cement mortar 1 : 6 (1 cement : 6 sand) and inside plastering with cement plaster 1 : 3 (1 cement : 3 sand) including earth work and laying 10 cm cement concrete in 1 : 5 : 10 (1 cement : 5 sand : 10 graded stone aggregate of 40 mm nominal size) and 7.5 cm cement concrete 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.

Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing vitreous china wash down water closet (European type) W.C pan including jet,cover with integral 'P' or 'S' trap with soil pipe in cement mortar 1:1 (1cement : 1 sand)

P/F plastic seat (solid/hollow type) and cover for washdown water closet with C.P. brass hinges and rubber buffers.

Providing and fixing PVC coloured/white automatic flushing cistern with a pair of PVC / C.I. or mild steel brackets, complete with fitting including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) 10 litres net capacity (Cera or Hindware make)

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 550 x 400 mm (Cera or Hindware make)

Providing and fixing 32mm (thirty two millimeters) nominal diameters C.P. brass waste of Hind ware/CERA for wash basin or sink including brass check nut complete.

Providing and fixing 32 mm dia, PVC waste pipe flexible (coil type) length not less than 800 mm.

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws. 600 x 20 mm

Providing and fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing C.P. Brass bib tap with Capstan head 15 mm dia (Cera or Hindware make)

Providing and fixing C.P. Brass pillar tap with Capstan head 15 mm dia(Cera or Hindware make)

Providing and fixing C.P. brass angle valve 15 mm without nuts and pipe.

Providing and fixing C.P. stop cocks 15 mm dia(Cera or Hindware make)

Providing and fixing PVC connection pipe with brass unions 300/450 mm length 15 mm nominal bore

Providing and fixing brass full way valve with wheel

(a) 15 mm nominal bore

(b) 20 mm nominal bore

Providing and fixing PVC floor trap ISI marked of self cleaning design including cost of cutting and making good the walls and floors etc. complete 110 x 75 mm (Diplast or Vectus make)

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (heavy grade) tube fittings and clamps including making good the wall, ceiling and floor. (TATA or Jindal make)

(i) 15 mm nominal bore

(ii) 20 mm nominal bore

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete (Diplast or Vectus make)

(a) 90 mm dia

(b) 75 mm dia

Providing and fixing PVC Collar, ISI marked including fixing with approved adhesive etc. complete(Diplast or Vectus make)

(a) 90 mm dia

(b) 75 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 90 mm(Diplast or Vectus make)

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etc. complete.

(a) 90 mm dia

(b) 75 mm dia

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap

P/F vitreous china bowl pattern urinal i/c connection the urinal with waste pipe by means of white lead mixed with chopped hemp complete with all respect. Flat back type size 430x260x350mm.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting. Stainless steel kitchen sink 610 x460 mm with boul depth 200 mm.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C.

Providing, Installation, testing and commissioning of ceiling fan with Dura fan step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. Ceiling Fan 1200 mm sweep, Makes:- Bajaj (Ultima),C&G (Cool bridge), Panasonic(As per Panasonic cat. No. FLO GS High Speed) or any other approved by Engineer-in-Charge.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Makes:- Bajaj, C&G, Usha or any other approved by Engineer-in-Charge. Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Providing and fixing indoor decorative aluminium extruded LED Tube fixture of following rating and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. LED tube fixture 20 Watt, 4 feet long. Makes:- Panasonic (Cat No PBTM08208), Philips, Wipro, or any other approved by Engineer-in-Charge.

Supplying and fixing 9 Watt LED lamp on existing light point as complete in all respect.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required complete in all respect.

Extra for using salt and coke for pipe earth electrode complete as required complete in all respect.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required complete in all respect.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x2.5 sqmm

2x6.0 Sq. mm.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A. (6 amps + 16 amps+32 Amp)

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-12 way

DEEPANSHU GAUTAM GOVT. CONTRACTOR