A&A to E.I of GSRDA at Ground Floor Nirmanbhavan, Gandhinagar.

:: BILL OF QUANTITIES::

Name A&A to E.I of GSRDA at Ground Floor Nirmanbhavan, Gandhinagar.

Item No Description of item(with brief specification and reference to book of specifications) Qty Unit Amount

Replacing old & u/s by Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (e) in existing pipe erected flushed on wall/ceiling complete Cat. III

Replacing old & u/s by Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and accessories with earth continuity of following type

2 erected on PVC / Metallic/Wooden box, single mounting base frame covered with 5 Pt 626.20

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed. (e) in existing pipe erected flushed on

wall/ceiling complete Cat. III

Replacing old & u/s by Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a switch

with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (e) in existing pipe erected

flushed on wall/ceiling complete Cat. III

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (e) in

existing pipe erected flushed on wall/ceiling complete Cat. III

Providing and erecting following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per site situation directed by Engineer In

charge. (1)One No. SP 6 Amp. Cat.III

(2) One No 5 pin plug Cat.III 55 Nos 151.50

(9) 16 Amp. SP one way switch Cat.III 20 Nos 180.79

(10) 6/16Amp. Universal socket Cat.III 20 Nos 199.98

(11) 6 Amps. Bell Push Cat.III 10 Nos 151.50

(19) Modular Indicating Call Bell Cat.III 10 Nos 329.26

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b)

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following sizes. (2) 25 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling,

7 with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth 450 Mtr 78.78

continuity of following size (E) in existing pipe (b) 2 wire 2.5 sq. mm

Replacing old & u/s light fitting by Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K

to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 % ( fitting required LM-

79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity/CCT between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (iii) 16-20 watts, Surge-2 KV Cat-lll

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (vi)36 watts, 24" x 24", Surge- 2KV Cat-lll

(D) LED Strip Light

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral suitable Driver complete

Cat-lll 50 Nos 220.18

(F) Spot Light 425 Lumens, Surge-2kV

(ii) 8 to 11 Watts

Cat-lll 6 Nos 1367.54

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long 5 Nos 312.09

Replacing old & u/s by Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

Shifting of Split A.C. The Scope includes dismantling, shifting, re-installing & re-commissioning of

the units including topping up of Refrigerant gas, minor civil work wiring existing piping M S

Stand electrical cabling with PVC drown piping for 1.00, 1.5 & 2.0 TR capacity.

Replacing old & u/s by Supplying and erecting insulated pair of soft copper tubing open or

11 concealed including power and control cable,necessary PVC drain pipes for Split AC machine up 110 Rmt 1158.47

to 4 TR capacity

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of

1.6 mm thick having with stand point load up to 1.33 Ton & free from seepage of concrete of

screed water with all accessories,Junction Box,Joints as required and demanded by engineer-

incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge

having following size of dimensions and No of compartments (W x D x T) Cat-III

[1] 50mm x 25mm x 1.6 mm with One Compartment 30 Rmt 297.95

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner

13 conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly -

Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe.

of following size of conductors & nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

(2) Two Pairs 50 Rmt 20.20

15 Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

Replacing old & u/s by new Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with textured/metallic /white

front plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

Modular PlugAccessories Cat. III

Type 26 Nos 1133.22

17 Hanging bed switch / Bell push 5A erected on existing flexible wire. 10 Nos 17.17

18 Providing & erecting ISI marked 3 pin plug top.

19 Decorative call bell Ting-tong box type 250 volts complete erected 6 Nos 71.71

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having

20 portable bell push working on D.C. & bell on 230V A.C. supply with cells / battery 4 Nos 250.48

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of

21 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed

Cat. III 3 Nos 2166.45

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected

22 duly painted for fan complete with proper insulation without leakage and earthing. 35 Nos 108.07

Providing & erecting fresh air fan 250 mm dia with square frame make of ABS body with louvers

Cat.II 6 Nos 1559.44

Supplying and erecting approved make double ball bearing oscillating type Heavy duty bracket

24 fan with Aluminium Blades A.C. 230V. 50 Hz wall mounted with height adjustment and rotary

tilting device complete with guard, wall bracket,mounting accessories as directed.

I/ We am/are willing to carry out the work at_________% above / below percent (should be written in figure & words) of the estimated mentioned above.

Amount of my / our tender works out as under.

Estimated amount put to Estimated amount put to

(a) I/we hereby declare that we have visited the site and fully exquisite myself/ourselves with the Local situation regarding materials labour and other factors

pertaining to work before submitting Tender.

(b) I/we hereby declare that we have carefully studies the conditions of contracts. Detailed Specification and other tender document of this work and agree to

execute the same accordingly.

1 If required and found necessary material to be used for this work and brought at site will have to sent to Govt.approved laboratory. The qualified

agency/ manufacturer of Particular product under testing will have to pay/ bear necessary charges.

2 All works shall be carried out as per public works Department hand book and other Specification.

3 Rates are inclusive of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.

3 Rates are inclusive of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.

4 The material to be used in this work must be as per instruction by under liason of Engg. In charge.The agency will have to agree to carried out the

work as per brand/make demand of concern deptt.

5 Contractor must have registration in E-2 & above class registered under elect. (R & B) division.

Sign Dy. Exe. Engineer Exe. Engineer

of Sachivalay Complex Elect. Sub-Div.No.-2 Sachivalay Complex Elect. Div

R. & B. Deptt. Gandhinagar R. & B. Deptt. Gandhinagar