Loading…
Loading…
Tender Value
₹3.6 Cr
EMD Value
₹3.6 L
Closing Date
22 Jun 2026, 6:05 pm
Executive Engineer (R & B) Division, Rajpipla (State)
Construction of B Type (05 unit) & C type (05 unit) Quarters at Dediapada, Dist Narmada
310592
05 of 2026-27
Open
Civil Works - Buildings
Vadodara
7 documents required · 7 mandatory
₹6,000
Executive Engineer Rajpipla ( RandB ) Division Rajpipla
₹3.6 L
2 Jun 2026
2 Jun 2026
2 Jun 2026
22 Jun 2026
2 Jun 2026
Name of Work : Construction of B Type (05 unit) & C type (05 unit) Quarters at Dediapada, Dist Narmada
BILL OF QUANTITIES
Item Description of Item (with brief specification and reference to book of
No. specifications) Quantity Unit Rate Amount
1 Excavation for foundation up to 1.50 MT depth including sorting out and stacking
of useful materials and disposing the excavated stuff up to 50 mt lead (A) Loose or 1389.00 Cu.M 125.86
2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out
and stacking of useful materials and disposing off the excavated stuff upto 1146.00 Cu.M 177.72
50 Meter lead. (B) Dense or Hard soil
3 Filling available excavated Earth (Excluding Rock ) in trench plinth side of
foundation etc. in layer not excluding 20 cm in depth consolidation each deposited 1034.00 Cu.M 137.47
layer by ramming and watering etc. complete
4 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.
thickness including watering, ramming and consolidating etc. complete. 248.00 Cu.M 310.56
5 Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 B.T. stone
aggregates 40 mm. nominal size) and curing complete excluding cost of from work 90.00 Cu.M 2825.98
in :(a) Foundation and plinth
6 Providing and laying controlled cement concrete M150 for curing complete
including cost of formwork but excluding the cost of reinforcement for reinforced
concrete work in (A) Foundations, footings,Base of columns,Plinth Slab and Mass 121.00 Cu.M 3762.60
7 Providing and laying controlled cement concrete M250 for curing complete
including cost of formwork but excluding the cost of reinforcement for reinforced
concrete work in (A) Foundations, footings,Base of columns and Mass concrete. 236.00 Cu.M 4460.16
8 Providing and laying controlled cement concrete M250 and curing complete
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Columns, pillars posts and struts Column Up to Plinth 33.00 Cu.M 7841.64
9 Providing and laying controlled cement concrete M-200 and curing complete
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Columns, pillars, posts and struts up to floor two level 114.00 Cu.M 7832.66
for Columns For All Floors.
10 Providing and laying controlled cement concrete M250 and curing complete
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work For Plinth Beams
11 Providing and laying controlled cement concrete M200 and curing complete
including the cost of form work but excluding the cost of reinforcement for 274.00 Cu.M 6214.96
reinforced concrete work in BEAMS For All Floor.
12 Providing and laying controlled cement concrete M200 and curing complete
including the cost of form work but excluding the cost of reinforcement for 138.00 Cum 6507.34
reinforced concrete work for Slab All floors
13 Providing and laying controlled cement concrete M-200 and curing complete
including the cost of form work but excluding the cost of reinforcement for 51.00 Cu.M 7471.17
reinforced concrete work For Lintels & Sill Level in All Floors
14 Providing and laying controlled cement concrete M-200 and curing complete
including the cost of form work but excluding the cost of reinforcement for 21.00 Cu.M 6340.73
reinforced concrete work For Chajja in All Floors
15 Providing and laying controlled cement concrete M-200 and curing complete
including the cost of form work but excluding the cost of reinforcement for 50.00 Cum 8400.17
reinforced concrete work in STAIR CASES for All floor
16 Providing and laying controlled cement concrete M-200 and curing complete
including the cost of form work but excluding the cost of reinforcement for 50.00 Cum 8941.13
reinforced concrete work in Vertical Walls for All Floor
17 Providing TMT bar reinforcement of Fe-500D for R.C.C. work including bending
binding and placing in position complete for All Floor 138429.00 Kg. 78.77
18 Proving & Fixing Chicken mesh for joint between brick work & RCC work fixing with
nail & GI washer as per director in Charge 280.00 Sq.M 74.74
19 Brick work using common burnt clay building bricks having crushing strength not
less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement 7.00 Cu.M 4310.73
: 5 -fine sand)(B) Conventional
20 Brick Work using Common Burnt Clay Building Bricks having crushing strength not
less than 35 Kg/sm. in super structure Above plinth level up to floor two level in
cement mortar (1:6) ( 1 cement : 6 fine sand) (Conventional) For All Floors 248.00 Cu.M 4612.63
21 Half brick masonry in common brunt clay building bricks having crushing strength
not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in
super structure above plinth up to floor two level Conventional Bricks for All 300.00 Sq.M 698.92
22 Providing throating or plaster drip and moulding to R.C.C. chhajja by making 5mm
to 15 mm wide groove as per design etc. complete 50.00 Rmt 44.07
23 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single
or half brick walls for interior plastering upto floor two level and finished even and 2360.00 Sq.M 196.14
smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)
24 Providing 10mm thick cement plaster (mala troweled finish) in single coat on
Celling,& Soffits of Stair, concrete wall for interior plastering finished even and 2580.00 Sq.M 199.53
smooth in (ii) cement mortar 1:3 (1 Cement : 3 Sand) For ALL Floors
25 20 mm thick Sand faced Gutka cement plaster with 1x1 cm grooves as suggested by
this office consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 cement : 3 coarse
sand ) and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse sand) for all 1831.00 Sq.M 360.57
heights as directed etc. complete.
26 Providing Water proofing Treatment on Sunk Slab including cement concrete
flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal
size) laid in one layer and finished with a floating coat of neat cement average 237.00 Sq.M 373.70
50mm thick to Prepare slope including water proofing chemical etc. Complete for
Sunk Slab All Floor.
27 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. Length for Sunk
Slab or as directed by Engineer in Charge etc complete. 7.00 No 101.91
28 Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & one coats
of primer of approved brand and manufacture on new wall surface to give an even
shade including thoroughly brushing the surface free from mortar dropping and 4962.00 Sq.M 30.55
other foreign matter and sand papered smooth.
29 Wall painting (three coats) of plastic paint with one wall highlight in special effect
(royal play) colour, shade and colour of approved brand and manufacture on
undecorated wall surface to give an even shade including throughly brushing the 2360.00 Sq.M 128.38
surface free from mortar droppings and other foreign matter and sand papered
30 Wall painting (three coats) with plastic emulsion paint of approved brand and
manufacture on ceiling and soffits of slab surface to give an even shade including
throughly brushing the surface free from mortar droppings and other foreign 2550.00 Sq.M 90.48
matter and sand papered smooth.
31 Finishing wall with weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the surface
to remove all dirt, and remains of loose powdered materials.etc complete 1829.00 Sq.M 122.14
32 Providing and laying 60 x 60 Cm Soluble Salt vitrified 10 mm thick Tiles in flooring
over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on
new surface or fixing on existing flooring by adhesive material including 440.00 Sq.M 1663.47
dismentaling of existing flooring and jointed with color cement slurry including
finised with flush pointing & cleaning the surface etc. complete for light shade
33 Providing and laying Soluble Salt vitrified 10 mm thick tile Tiles in skirting, risers of
steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 90.00 Sq.M 830.22
pointing in white cement with white cement slurry
34 Providing and laying Machine Cut free edges, Machine polished Granite Stone slab
18 mm thick single peace For Stair,Steps,landing as per design incl. full moulded
round front edge and 1cm nosing and necessary groove on trade of steps laid on
mm thick cement mortar 1:6 (1 -cement : 6 coarse sand ) jointed with grey 60.00 Sq.M 2429.05
cement slurry including rubbing,polishing & Finishing etc. complete
35 Providing and fixing machine cut, free edges, pre mirror polished Grenite marble
stone slab 18 mm thick (single piece not less than 150 cm ) for vertical
wall/Doors/Windows Sill,Jams for cladding as per design including full moulded
round inside edge and laid on 10 mm thick cement mortar 1:3 ( 1 cement: 3 coarse 210.00 Sq.M 2490.66
sand) jointed with grey cement slurry including rubbing and polishing finishing etc.
36 Providing and fixing 60 x30 CM Machine cut, mirror polished Blue Kotah stone slab
flooring 25 mm thick laid on 20 mm thick cement mortar 1:6 ( 1 cement:6 coarse
sand) jointed with matching pigment & cement slurry including rubbing and 31.00 Sq.M 1189.78
polishing finishing etc. complete.
37 Providing and laying 300 X 300 Matt Ceramic tiles 6mm thick in flooring treads of
steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 32.00 Sq.M 1017.30
coarse sand ) finishing with flush pointing in white cement.
38 P & L Colour glazed Ceramic tiles size 60 x 30 cm 6 mm thick in skirting risers of
steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and
jointed with colour cement slurry
39 Providing and laying water proofing treatment with china mosaic tiles flooring
over avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain and curve
surface & 12 mm to 20 mm of broken piece not more than 2.5CM of ceramic /
glazed tiles ( one for more colour as directed ) to be laid over cement mortar
bedding of C M 1:3 (1 cement : 3 sand ) contain water proofing materials per bag of
cement useas specified by manufactured and slops to be tempered to bring mortar
up to surface with using white cement and colour pigment including rounding of
junctions and extending them up to 15 cm along the wall and curing with bends
any patens or design as per drawing and cleaning by using oxalic acid etc.
40 Constructing Sandwich Platform of 18 mm thick Polished Black or selected Granite
at top and 25 mm thick Kota stone slab With 75CM height with necessary Support
using 20mm thick cement mortar 1:3 for sandwich and fitting at bottom & edges
with waterproof rigid adhesives including making necessary grooves in walls with
Vertical support of double Kota stone sandwich every 60 cm centre to centre 30.00 Sq.M 3671.35
including all labour material of approved quality including full moulded round
front edge fixed in wall for partition and jointed with grey cement slurry
including rubbing and polishing etc. complete
41 Providing and fixing Single shutter 35mm Thick door solid core wooden flush
shutter conferming to IS:2202 & ISI approved manufacture, covered with 1 mm
thick laminates on each side of shutter, 6 mm thick polished teak wood beading on
periphaery, 150 mm-200 mm S.S. Handles and S.S. Fixtures & Locking Arrangement 160.00 Sq.M 5955.97
on Each shutter, fixed with 4 Nos. 150 mm High S.S. hinges Complete as directed by
Engineer in charge
42 Providing and fixing jindal E (30 mm) series Three track alluminimum window (3
shutter +1 Mosquito net shutter) standard extureded colour anodized section with
frame having frame bottom member jindal section no:20928 @ wt. of
kg/Rmt, frame side and top member jindal section no.:20837 @ wt. of
Kg/Rmt with sliding shutters of single glass shutter top bottom member Jindal
section no.20993 @ wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 @ 60.00 Sq.M 4934.86
wt. of 0.994 Kg/Rmt & inter lock member jindal section no. 20549 @ wt. of
Kg/Rmt. with 5 mm thick transperent plain float glass in shutter including fitting,
fixtures, rubber gasket and transperent silicon seleant as per drawing and
instruction of engineer in charge etc. completed for Window Three Track
43 Providing and fixing jindal E (30 mm) series Three track alluminimum window (2
shutter + 1 Mosquito net shutter) standard extureded colour anodized section with
frame having frame bottom member jindal section no:20928 @ wt. of
kg/Rmt, frame side and top member jindal section no.:20837 @ wt. of
Kg/Rmt with sliding shutters of single glass shutter top bottom member Jindal
section no.20993 @ wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 @ 20.00 Sq.M 3373.40
wt. of 0.994 Kg/Rmt & inter lock member jindal section no. 20549 @ wt. of
Kg/Rmt. with 5 mm thick transperent plain float glass in shutter including fitting,
fixtures, rubber gasket and transperent silicon seleant as per drawing and
instruction of engineer in charge etc. completed for Window Three Track
44 Providing and fixing in position standared extruded approved colour anodised
aluminum vantilation with outer frame of (Jindal section No. 21458 @ wt 0.658 kg/
Rmt ) with 5 mm thick bajari figure adgesteble tinted louvers glass fixed to 20.00 Sq.M 1961.42
alluminimum strip blade including fixtures, fastening, labours and equipments as
per detailed drawing as directed. For ventilation
45 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304) of
required size like partition type in kitchen platform having drawer front side and
backside by using 19mm thick all proof plywood of ISI quality all side laminated etc.
as directed. The size of SS (IS 304) basket of size 4" to 18" for tperforated, partition 30.00 Sqmt. 12645.20
type as directed including necessary S.S. fittings, handles, nobs, telescopic
channels, etc. as directed
46 Providing and fixing 90 cm high Stainless Steel railing made from anticorrosive
grade S.S. pipe of 50 mm dia (16 gauge) as hand rail with S.S. 304 grade baluster of
32 mm dia (16 gauge) as a vertical support fixed in RCC slab / steps of stair at
Mt. c/c including three horizontal S.S. pipes of 16 mm dia (16 Gauge) at equal 100.00 Rmt 2377.54
distance fixed by 16 mm dia (16 Gauge) S.S. pipe with baluster including
accessories as per detailed drawing as directed etc. complete.
47 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of
required capacity each with all necessary fittings and connection etc. complete on
48 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR
(Type B) Pipe conforming to IS 13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved
make for drainage system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm 240.00 Rmt 897.79
diameter x 149 mm length x 145 mm height at every 2000 mm centre to centre or
shall be concealed in walls as directed including necessary fittings such as bends,
"Y" "T" shoes etc. including testing of pipes and joints and jointed with adhesive
solvent cement including cost of all materials.
49 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B Pipe
conforming to IS 13592-1992 with one end plain and other end socketed with
rubber ring, & fitting conforming to IS 14735-1999 of approved make for drainage
system pipeline, pipe shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using PVC Clamp of the size 160mm dia x 210 mm length x 400.00 Rmt 834.38
196 mm high at every 2000 mm centre to centre or shall be concealed in walls as
directed including necessary fittings such as bends, shoes, tees, etc. including
testing of pipes and joints and jointed with adhesive solvent cement including cost
of all materials (i) 160 mm dia
50 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings make as approved by Engineer In Charge. Pipe
shall be fixed on the wall with the help of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings etc. including testing of pipe and 1020.00 Rmt 195.67
joints and fixing the same with adhesive solvent, including cost of all materials.
51 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings make as approved by Engineer In Charge. Pipe
shall be fixed on the wall with the help of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings etc. including testing of pipe and 430.00 Rmt. 148.12
joints and fixing the same with adhesive solvent, including cost of all materials.
52 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings make approved by Engineer In Charge. Pipe
shall be fixed on the wall with the help of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings etc. including testing of pipe and 1020.00 Rmt. 91.84
joints and fixing the same with adhesive solvent, including cost of all materials.
53 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)
Pipe having National Sanitation Foundation (NSF) seal for potable water of
following dia. Nominal bore tube fitting and clamps including making good the wall, 30.00 Rmt. 253.82
ceiling, and floor, etc. complete 25 mm dia
54 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)
Pipe having National Sanitation Foundation (NSF) seal for potable water of
following dia. Nominal bore tube fitting and clamps including making good the wall, 40.00 Rmt. 170.36
ceiling, and floor, etc. complete 15 mm dia
55 Providing and fixing S.S. Napkin hanger for Washbasin. 10.00 No 353.50
56 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm
dia. Each 10.00 No 282.16
57 Providing and fixing Health Fauset Heavy duty with hook with fitting 10.00 No 582.03
58 Providing and fixing S.S. Hanger behind the door. 20.00 No 252.50
59 Providing and fixing Gun metal check or non-return full way wheel valve.(D) 50mm
60 Providing and fixing Gun metal check or non-return full way wheel valve.(E) 40mm
61 Providing and fixing Gun metal check or non-return full way wheel valve.(C) 25mm
62 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii)
63 Providing and fixing Water Closet Squatting Pan (Indian Type W.C. Pan) size
580mm Integral Foot Rest Type (A) Vitreous China.(I) Long pattern = White colour
including 100mm size P or S trap for water closet squatting pan including jointing
the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand) 10.00 No 1678.67
with 25mm dia. Chromium plated brass half trun flush cock of approved quality
including fixing in pipe line G.I. inlet connection for flushing W.C. Pan etc.
64 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x 400mm size. (i)
In white colour. including with approved sanitary grade material with C.P waste
coupling, waste pipe, 15mm dia Pillar & Stop Cock of approved brand with 10.00 No 2147.26
connection 15mm dia flexiable pvc pipe etc. complete
65 Providing and fixing screw down bib taps of following size.(B) Brass chromium
plated screws down Bib Tap. (i) 15mm dia. 30.00 No 186.83
66 Providing and fixing brass screw down stop tap.(A) 15mm dia. make as approved
by Engineer In Charge. 10.00 No 205.83
67 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter
with jali of the following nominal diameter of self cleansing design with C.I scread
down or hinged grating including the cost of cutting and making good the walls. 20.00 No 600.23
68 Providing and fixing S.W. Gully trap with C I grating brick masonry chamber and
water tight C I cover with frame of 300 x 300 mm size (inside) with standard weight 20.00 No 1246.92
(i)square mouth traps (C) 150 mm x 100 mm size P or R type
69 Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed to
wooden plugs with C.P. Brass screws, (B) 600mm x 20 mm size 5.00 No 616.42
70 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of superior glass
mounted on 6mm the A.C. sheet or plywood sheet & fixed to wooden plugs with 5.00 No 859.41
C.P. brass screws and washers.
71 Providing and fixing in position PVC cowel went to pipes.(C) 160mm dia 10.00 No 75.75
72 Providing and fixing in position PVC cowel went to pipes.(B) 110mm dia. 10.00 No 50.50
73 Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure
polyethylene pipes of the following outside dia. Low density, complete with special
flange compression type fittings wall clamps etc. including making good the wall, 680.00 Rmt. 339.05
ceiling and floor. (G)110 mm
74 Constructing brick masonry chamber for under ground C.I. Inspection chamber and
bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I.
Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, Total
weight of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and
wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand :
graded stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster
mm. thick with cement mortar 1:3 finished smooth with a floating coat of neat
cement on walls & abed concrete etc. complete.(ii) Inside dimensions, 500 mm. x
700 mm. and 450 mm. Deep for pipe line with one or two inlets.
75 Applying general insecticide pest control treatment to floors, cupboards etc.
including labour material etc. complete. Using Imidacloprid 30.5 SC As Per IS
part-III (0.075% Concentration by mass) is recommended 10.5 ml chemical dilute 340.00 Sq.M 43.97
with 5 litters of water application 0.5 Litre chemical / Sq.M of surface is
recommended as per I.S
76 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement
mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes
and joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-
Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for 100.00 Rmt 564.52
stoneware pipes (166mm Ave. bed thickness) of following internal diameters with
necessary formwork and curing complete.(B) 150mm dia.
77 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement
mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes
and joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-
Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for 400.00 Rmt 352.74
stoneware pipes (166mm Ave. bed thickness) of following internal diameters with
necessary formwork and curing complete.(B) 110mm dia.
78 Providing and laying (to level or slope) and jointing reinforced concrete not
pressure pipes IS class NP 2 of the following internal diameter with collars and nut
ends prepared for collar joints including testing of joints complete 300 mm dia 515.00 Rmt 678.03
79 Providing and laying in trenches jointing in true line and level 50mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings make approved by Engineer In
Charge, including necessary fittings etc. including testing of pipe and joints and 320.00 Rmt 195.67
fixing the same with adhesive solvent, including cost of excavation & refilling the
same with all materials.
80 Providing and fixing Safety Grills of required pattern for windows/door using 16mm
x 16 mm square M.S. polished bars, Required at required spacing as per design and
hold fast with coach bolts including one coat of primer and two coats of matt 1660.00 Kg. 116.91
finished oil painting etc. complete.
81 Providing plinth protection to building including excavation in ordinary soil and
laying cement concrete 1:4:8 using stone aggregates of 40mm nominal size in
foundation layer 0.10 mt. thick below pre-cast Rubber Dye inter locking concrete
block 60mm thick with grade of concrete M200 pneumatic compressed by
mechanically pressed and as per approved design including 75mm Sand layer for
levelling and filling the joint with sand in proper line and level etc. complete,
Including Providing and fixing pre-cast concrete kerb stone of grey cement based
concrete block 30cm length,30cm height and 15cm thick of M250 grade concrete
as per approved design and including excavation for fixing in proper line and level,
filling the joint with C:M 1:3 (1cement:3fine sand) etc. complete.
82 Providing and fixing kitchen sink painted white with C.I. or M.S. brackets M.I. Fiber
union 32 mm dia. C.P. brass waste 32 mm dia. 15 mm stop cock etc. completed,
including cutting holes in walls and making good the same but excluding fittings, (C 10.00 Nos. 3149.18
) Vitreous China Sink (i) 600 mm X 450 mm X 150 mm Size
83 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block
60mm thick with grade of concrete M300 pnumatic compressed / vibrated
mechanically and as per approved design Confirming to IS 15658 : 2006 including 761.00 Sqmt. 705.95
35 mm Sand layer for levelling and filling the joint with sand in proper line and
level as per guidlines of IRC : SP 63-2018 etc. Complete.
84 Providing and fixing Kotastone shelves (size 150 x 300mm) as approved by Engineer
In Charge. 86.00 Sq.mt. 220.25
85 Providing and fixing Granite shelves (size 150 x 300mm) as approved by Engineer In
Charge. 3.00 Sq.mt. 3689.55
86 Providing and fixing wooden cupboard frame the skeleton (plywood frame
structure) with 18 mm + 18 mm thick BWR grade plywood for vertical and
horizontal plywood (patti) both side cover with 6 mm + 6 mm thick BWR grade
plywood for grooving as per design. Fixing properly without any air gap and
finishing with selected 4 mm thick imported veneer having melamine polish. Before 26.00 Sq.mt. 3030.00
installation, make hole / face plate for conduit pipes of electrical / networking
cables with openable stud from partition, including all materials and labour etc.
complete as per detail drawing and instruction of Engineer-in-charge.
87 Providing and fixing Collapsible Grills steel shutters with vertical channels 20 x 10 x
2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T
rin 40 X40 X 6 mm with bolts, nuts, locking arrangements, stoppers handles 16.00 Sq.mt. 6221.19
including applying a priming coat of red lead paint.
88 Providing and fixing a sloping polycarbonate canopy over the balcony opening to
provide effective protection from rainwater. The canopy consists of UV-stabilized
translucent polycarbonate sheets fixed on a MS powder-coated / painted frame,
properly anchored to the wall structure with suitable fasteners.The canopy is
installed with a sufficient slope to allow rainwater to drain away, preventing water
from entering the balcony area. All sheets are fixed using self-drilling screws with 36.00 Sq.mt. 2291.69
EPDM rubber washers to ensure watertight joints and prevent leakage.The work
includes cutting, drilling, sealing of joints with silicone sealant, fixing, scaffolding,
labour, tools & tackles and all incidental charges, complete to protect the balcony
from direct rainwater entry and weather exposure.
89 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed
with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc 10.00 Sq.M 1441.90
complete as directed by Engineer in charge.
90 Steel work, riveted in built up sections framed work including cutting, hoisting,
fixing in position and applying a priming coat of red lead paint. (A) In beams and
joists, channels angles Tees, flats, with connecting plates or angle cleats as in main 10.00 Quintal 5889.50
and cross beams. Hip and jack rafters, purlins conneted to common rafters and the
91 Providing and fixing post and pipe railing as per detailed drawing including 3 coats
of painting to steel works complete. 17.00 Rmt 1210.38
92 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure
poluthene pipes of the following outside Dia. Low densidy, complete with special
falnge compression type fittings, wall clipsetc. including making good the wall 120.00 Rmt. 515.27
ceiling and floor.(G)160 mm
93 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with
excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including brick
masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick cement
plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS 40.00 Nos. 7087.17
steel and 0.60mx0.45m cast iron manhole cover with frame weight not less than
kg as per directed by Engineer-in-charge
94 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m &
excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete of
0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm
thick cement plaster inside & outside with cement slurry & 10cm thick RCC 1:2:4 10.00 Nos. 14799.53
top cover with frame of minimum weight of 35 kg & filling filter material kapchi in
layers (25-40mm & 10-20mm) & BT metal 40mm & sand as per directed by
Engineer-in-charge.
95 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging with
excavation filling the pit with gravel & sand in layers including making 300mm dia
bore depth of 4.5mt & above concrete with kapchi in layers (25-40mm & 10- 4.00 Nos. 9551.57
20mm) & BT metal 40mm & filling brick as directed by Engineer-in-charge.
96 Drilling of 200 / 215 mm dia. bore well in over burden rocky or loose collapsible /
boulder strata & lowering of 175 / 200 mm dia. UPVC / PVC / ERW casing pipe 45.00 Rmt 414.10
above 12 meters and up to 40 meters depth by DTH rig etc.complete
97 Supplying slotted PVC pipes of approved quality at site of work confirming to IS.
98 Supplying PVC plain pipes of approved quality at site of work confirming to IS.
99 Providing and jointing flat flexible coppered calble PVC insulated enamelled
aproved make three core 2.50mm. 50.00 Rmt. 117.16
100 Supplying submersible pump set suitable for bore of 150 mm dia or more having
phase motor capacity not less than 10 HP with [A] 10 stage 575 to 480 LPM
discharge at 60 to 70 mtr head for 65 mm dia delivery pipe Supplying and erecting
push button operated fully automatic Star-Delta starter with 3 Nos.of 32A. rating
contactors and. 1 No. of directly operated thermal overload relay having 20-32A 2.00 Nos. 54277.40
range in sheet steel enclosure for 3 phase 415V. 50 c/s. A.C. motors up to 35 H.P.
(A)P.W.Blockwith necessary connection complete erected onas directed. Cat-II
101 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium grade) of
the 50mm nominal bore, tube, fittings and clamps include. Making good the wall
ceiling and floor.(F) 50mm dia.
102 Providing and fixing to concealed wall ceiling and floor galvanized mild floor tubes
(medium grade) of the 50mm nominal bore, tube, fittings and clamps incldg.
Making good the wall ceiling and floor (F) 40mm dia..
103 Providing and fixing to concealed wall ceiling and floor galvanized mild floor tubes
(medium grade) of the 25mm nominal bore, tube, fittings and clamps incldg. 35.00 Rmt 401.95
Making good the wall ceiling and floor.(C) 25mm dia.
104 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out
and stacking of useful materials and disposing off the excavated stuff upto 31.00 Cum 229.33
50 Meter lead (B) Dense or Hard soil
105 Brick work using common burnt clay building bricks having crushing strength not
less than 35 Kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 93.00 Cum 4279.98
6 -fine sand) (B) Conventional.
106 Constructing brick masonry chamber for underground C.I. Inspection chamber and
bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5
C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total
weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.
of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- 10.00 No 2932.93
graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster
15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat
cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx
610mm and 450mm deep for single pipe line.
107 Constructing brick masonry chamber for underground C.I. Inspection chamber and
bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5
C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total
weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.
of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- 5.00 No 7180.44
graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster
15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat
cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x
850 mm and 450mm deep for pipe lines with three or more inlets.
108 Providing and laying (two level or slopes) and jointing with stiff mixture of Cement
Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes 150mm laying lime
concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-Graded brick aggregates 40mm 25.00 Rmt 803.14
nominal size) bedding for stoneware pipes of following internal diameters with
necessary formwork and curing complete.
109 Providing and laying controlled cement concrete M-200 and curing complete
including the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Ground & Plinth BEAMS
110 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1
including neat cement finishing watering etc. Complete 17.00 Rmt 24.28
111 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete
work for plastering comprising of base coat of 12 mm thick cement plaster in
cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top
coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including
scaffolding curing etc. complete. For Ground floor
112 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on
10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white 55.00 Sqm 1070.50
cement slurry (upto 10 ton)
113 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not
less than 35Kg. 1.00 Nos. 958.17
114 Providing & erecting open well horizontal mono block pump set with cast iron
body, complete for three phase submersible motor having [H]For 15 H.P,3 phase
open well horizontal mono block pump set suitable for 1600 LPM to 1025 LPM @ 2.00 Nos 36107.50
33 to 42 MTR head suitable for 65/80 mm dia delivery pipe
115 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm thick
flooring over 20 mm (average)thick base of cement mortar 1:6 (1-cement 6-coarse
sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over and jointed with grey
cement slurry mixed with pigment to match the shade of slab including rubbing
and polishing etc.complete
116 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm thick in
riser of steps,skirting dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-
cement 3-coarse sand) and jointed with grey cement slurry mixed with pigment to 2.00 Sqmt 1205.60
match the shade of slab including rubbing and polishing etc.complete
117 Distempeing (Two coats) with oil bound distemper of approved brand and
manufacture and Washable of required shade on wall surfaces to give an even
shade, over and including a priming coat with distemper primer of approved brand
and manufacture after thoroughly brushing the surface free from mortar dropping 90.00 Sqmt 77.30
and other foreign matter and also including preparing the surface even and sand
papered smooth.
118 Distempeing (Two coats) with oil bound distemper of approved brand and
manufacture and Washable of required shade on Celling and sloping roof to give an
even shade, over and including a priming coat with distemper primer of approved
brand and manufacture after thoroughly brushing the surface free from mortar 26.00 Sqmt 85.85
dropping and other foreign matter and also including preparing the surface even
and sand papered smooth.
119 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S
laths inter-locked together through heir entire length and jointed together at the
ends by end locks mounted on specially designed pipe shaft with bracket
plates,guide channels and arrangement for inside and outside locking with push- 9.00 Sqmt 3784.54
pull operation including the cost of hood cover and sprig etc.complete(A) Shutters
having width Above 3.5M
120 Providing and fixing window having extruded aluminum Colour anodized section
frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of
0.738 Kg/mt) horizontal two track member size size 92mm x 31.75mm x 1.50mm
(of Jindal Section no:8933,@ Wt. 1.06 Kg/mt), vertical member of size size 92mm x
31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)with sliding
shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section 4.00 Sqmt 2362.39
no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm
(of Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt)
with 5 mm thick transparent bronze colour tinted float glass with powder coated
aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame
as per details etc complete for W2&W3
121 Providing and fixing Mirrar polished 18 mm thick Green Marble stone with full
round edge and polished of approved quality in clading on sill and around the
doors/ windows/ ventilation with 20 mm thick cement motor CM (1:3) and fixing 12.00 Sqmt 1730.13
with cement slurry & adhesive including moulding of exposed edges as directed by
engineering in charge etc. complete.
122 Earthwork in cutting including preparing the slope and camber andstacking or
utilising the cutting stuff in bank as directed upto 200 Meters from the end of
cutting with all lead and lift.(i) Hard murrum.+ Add extra over item 9 for conveying 88.00 Cum 396.05
and utilising the stuff in bank from end of cutting with all required lead and lift.(C)
Above 400 Meters upto 500 Meters
123 Box cutting the road surface to proper slope and camber for making a base for road
work including removing the excavated stuff with desposing on the road side slope 252.00 Cum 112.02
as directed up to 50 mt. Lead
124 BT Metal 25 to 40 MM & Aggregate 13.2 and down chips & SD including
conveyence + Spreading the stone aggregate for rolling and W.B.M. including
filling the interstices to required camber and gradient (excluding spreading of 76.00 Cum 1153.62
Blindage)(iii) 25mm to 50mm size crushed stone
125 Providing and laying foundation cement concrete 1:3:6 ( 1 cement :3 coarse sand :
6 aggregate 20mm nominal size ) graded concrete and curing complete 51.00 Cum 3925.48
126 Providing and and laying controlled cement concrete M250 and curing etc. comp.
including the cost of form work and reinforcement for R.C.C. work for internal 101.00 Cum 4185.96
127 Compaction and finishing of cement concrete road by tremix process, providing
extra labour charge for tremix ( Vaccum dewatering service ) process on cement
concrete road surface by using vaccum dewatering pump floater surface vibrator 502.50 Sqm. 81.81
including making groove 5mm width and filling with polyvynile polymer and rough
finish to surface as per instruction including leveling etc. complete.
128 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with
collars for culverts including setting and joining the pipes in C.M. 1:2 watering and
laying (To level of slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated 150.00 Rmt 1095.18
technology of following internal diameter. (i) 300 mm dia.
129 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete
block 30cm length,30cm height and 15cm thick of M200 grade concret as per
approved design and including excavation for fixing in proper line and level,filling 190.00 Rmt 413.84
the joint with C:M 1:3 (1cement:3fine sand) etc complete.
130 Supply, installation, testing and commissioning of ABC type 6 kg confirm to
IS:15683, with ISI marked / TAC approved fitted with required accessories 10.00 Nos 3030.00
including wall suspension brackets.
131 FIRE EXTINGUISHER
Supply, installation, testing and commissioning of Carbon Dioxide (CO2) type Fire
Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC approved fitted 10.00 Nos 10605.00
with required accessories including wall suspension brackets.
132 Supply, installation, testing and commissioning of Modular ABC type 5 kg confirm
to IS:15683, with ISI marked / TAC approved fitted with required 10.00 Nos 3535.00
accessories including wall suspension brackets.
133 Demolition including stacking of serviceable materilas and disposal of
unserviceable materials with all lead and lift. (i) R.C.C. work 285.00 Cu.M 1108.12
134 Demolition of Brick work and stone masonry including stacking of serviceable
material and disposal of unserviceable materials with all lead and lift. (ii) In 227.00 Cu.M 576.30
135 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including
chowkhats architraves, holdfasts and other attachment etc. complete and stacking 30.00 Each 196.66
them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.
136 Dismantling sanittary fittings like wash basin . W.C. pan Indian and European type,
flushing tank etc. including stacking the materials with all lead and lift. 18.00 Each 424.10
137(a) Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)
both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires
up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of following type, erected on PVC /
Metallic/Wooden box, single mounting base frame covered with 202.00 Pt. 485.81
textured/metallic/white front plate modules erected on / in wall / ceiling as per
pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete. Cat-III
137(b) Light Point for Toilet & Bath.Cat-III 30.00 Pt. 242.91
138 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are
of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to
mtr length, in below type of pipe erected with 6A Modular type switch and hum
free EME step type electronic fan regulator mounted and accessories with earth
continuity of following type erected on PVC / Metallic/Wooden box, single 57.00 Pt. 674.68
mounting base frame covered with textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete Ca-III
139(a) Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of
ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr
length, in below type of pipe erected complete with Modular type switch & 5 pin
Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate
modules erected on / in wall / ceiling as per pipe erected with following type of 65.00 Pt. 510.05
accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby
switchboard/mcb db board.(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete.Cat-III
139(b) [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db
board.(f) with medium class Rigid PVC pipe and accessories erected concealed in 40.00 Pt. 745.38
wall/ceiling complete.Cat-III
140 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket
erected on PVC / Metallic/Wooden box, single mounting base frame covered with
textured / metallic/white front plate modules erected on / in wall / ceiling with
following type accessories. Ca-III
141(a) Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as per 10.00 Nos. 160.59
site situation directed by Engineer In charge.(4) TV Co-axial Socket outlet .Cat-III
141(b) (7) Blank Plate Single.Cat-III 104.00 Nos. 25.25
141(c) (8) Computer RJ-45 socket Ca-III 25.00 Nos. 160.59
141(d) (9) 16 Amp. SP one way switch.Cat-III 10.00 Nos. 180.79
141(e) (10) 6/16Amp. Universal socket Ca-III 25.00 Nos. 199.98
141(f) (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch.Cat-III 15.00 Nos. 410.06
142 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with necessary PVC fittings &
Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in 1050.00 Mtr. 33.33
approved manner as directed. (b) 25 mm
143 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected concealed
in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 1860.00 Mtr. 82.82
stranded wire of green colour for earth continuity of following size. (A) With
medium class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm
144(a) Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected in / on wall
/ ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 500.00 Mtr. 112.11
green colour for earth continuity of following size (a) with medium class Rigid PVC
pipe and accessories (a) 2 wire 4 sq. mm
145 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade
ISI marked copper wires of following size to be erected as directed.(e) 1.50 Sq.mm 110.00 Mtr. 46.46
3 core round PVC sheathed
146 Providing & Erecting approved make following size of TV Co-axial flexible cable
comprising inner conductor of solid bare copper insulated with Foam PE &
Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable 300.00 Mtr. 39.39
coverage overall sheathed with black PVC insulation.(b) RG-6
147 Supplying & erecting approved make LAN cable of following size in existing pipe as
per direction. [C] CAT - 6 300.00 Mtr. 47.47
148 Providing & erecting Switch board for Computer or electric apparatus consisting
of following modular type accessories mounted with PVC / Metallic
concealed/open box with single mounting base frame covered with
textured/metallic /white front plate,modules erected with necessary connections
as directed. 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch, 3 nos.
6A 5 pin Plug [B] For Modular Type Accessories Ca-III
149 Decorative call bell Ting-tong box type 250 volts complete erected 10.00 Nos. 71.71
150 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be made
of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder
coated and high U.V. & corrosion resistance with diffuser with company
mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to
6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 % (fitting 155.00 Nos. 535.30
required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges
of Wattage capacity of LED fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.) (A) Tube Light with integral driver. (v)
Watts, Surge-2 KV, IP-20, conventional 4 feet Ca-III
151 Supplying and erecting led lamps with following wattage capacity of 220 to
voltage, minimum 15000 burning hours life, 500 V in built,
surge,protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 57.00 Nos. 112.11
lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable
LAMP holder. (ii) 8 watts Cat-III
152(a) Supplying and erecting LED street light / Flood light fittings with High power White
LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more
than 130 lm/w and corrosion free High pressure die cast aluminum housing with
smooth finish powder coated and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,
CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt 28.00 Nos. 4997.48
. LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:
Below description have shown ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity between the ranges shown.)(A)
Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC
line supply with over-voltage protection. (ii) above 48 to 60 Watts Cat-III
152(b) (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun
aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical
mounting driver and accessories wired upto terminal block.IP 65 (b) 40 W Ca-III 2.00 Nos. 4819.72
153 Providing and erecting Approved make Four pole moulded case circuit breaker
having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to
25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. 4.00 Nos. 6790.43
supply 50 c/s. with all internal connections, spreader tinned copper & complete
erected in existing 16 G.M.S. housing.ICS=100% of ICU only.Cat III
154 Providing and erecting Approved make Four pole moulded case circuit breaker
having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating
200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 4.00 Nos. 16221.61
c/s. with all internal connections, spreader tinned copper & complete erected in
existing 16 G.M.S.housing Cat III
155 Providing and erecting busbar chamber confirming to IS-375 fabricated from
G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and
necessary busbar supports with COPPER busbar having current density not more
than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with
colour insulation tape for phase sequence, three phase & neutral each suitable for 1.00 Rn.Mtr 5731.75
following current capacity with necessary painting mounted on wall or pedestal
frame of required size with necessary connections.(B) Suitable for 200 Amp.
156 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper
Busbars with four equal Nos. of electrolyte bus having current density not more
than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with
colour insulating tape for phase sequence of following current carrying capacity, 1.00 Rn.Mtr 3202.71
erected with necessary bus bar supports /insulators, main cable socket to each bar,
erected in existing cubical panel with necessary connections.(B) Suitable for
157 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and
having breaking capacity 10 KA to be erected in existing box. confirming to IS 30.00 Nos. 270.68
8828/1996 with ISI Mark.Cat-III
158 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to
operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 96.00 Nos. 112.11
existing box. confirming to IS 8828/1996 with ISI Mark Ca-III
159 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C
Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 10.00 Nos. 330.27
following capacity.(B) 40 Amp.Cat-III
160(a) Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)
having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 18.00 Nos. 278.76
following capacity.(A) 6 to 32 Amp.Cat-III
160(b) (B) 40 Amp. Ca-III 2.00 Nos. 295.93
161 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having
10KA breaking capacity & confirms to IS :8828 in existing box having following 6.00 Nos. 638.32
capacity.(b) 40 Amp. Ca-III
162 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)
having 10KA breaking capacity & confirms to IS :8828 in existing box having 8.00 Nos. 668.62
following capacity.(b)40 Amp. Cat-III
163 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos.
MCB 6.00 Nos. 108.07
164 Sheets steel powder coated enclosure suitable for incorporating One/Two nos.
165 Providing and erecting Sheet Steel powder coated MCB distribution board - flush /
surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms
to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of MCB to be used) suitable for
(A) single phase incoming and horizontal single phase outgoing. (b) sheet steel
double door (IP-43) (iv)12 way
166 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for
operation on single phase 240 V,50Hz. having characteristic of quick action & 22.00 Nos. 1969.50
tripping with all advance feature & do not incorporate any electronic component.
for following Max. rating erected as directed. (i) 25 Amps.DP.Cat-III
167 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 120.00 Kg 77.77
168 Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with
coupling and buch buried in specially prepared earth pit complete with necessary 8 22.00 Nos. 368.65
SWG earth wire.
169 For using salt and charcoal / coke as required for pipe type earthing. 22.00 Nos. 171.70
170 Supplying & erecting earth pit of minimum bore dia.150mm size approved make
Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of
corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,
connection terminal dia of 12mm with constant ohmic value surrounded by highly
conductive compound with high charge dissipation suitable for following type of
applications with chamber and heavy duty cover.(approved make OEM has to
submit test certificate) & having back filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:-
< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-
Earthing compound should be capable to retain moisture for long time Necessary
test report must be submitted. (a) For Electrical Installation up to 440V in normal
soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.
171 Providing & erecting weather proof, dust & vermin proof, floor mounted front
operated indoor type cubical panel board necessary IP-42 and above protection as
per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for
outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with
necessary accesories , supporting angles/ flats channel including cutting, bending,
drilling, welding, riveting with internal partitions & cable alley as per requirements
& instruction of engineer-in-charge with erection of supplied switch gears,
BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium
strips, rubber grommets, rib, bakelite control fuses/MCB for measuring
instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,
sufficient nos. of hinged doors, handles with locking arrangement and rubber
gasket,heavy duty end terminal onnection, danger notice board,necessary
ventilation, earthing strip complete. The Panel shall be painted with epoxy powder
(The rates excludes the cost of switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured
excluding base beams) The panel shall be supplied with following approved 0.00 0.00
manufacturers with following size.(A) locally fabricated panel board.(i) with
172 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in
existing trench / pipe of following size of cables.(B) 3 1/2 core 35 Sq. mm ( 16 Sq. 40.00 Mtr. 220.18
173 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in 440.00 Mtr. 126.25
existing trench / pipe of following size of cables (b) 4 core 6 Sq. mm
174 Making trench in soft soil of suitable width of 90 cm deep for laying cable or
locating the fault all over the run and back filling the same and making the surface 400.00 Mtr. 55.55
as normal ground.
175 Providing & laying approved make Double walled corrugated pipes (DWC) of
polyethylene(conforming to IS 14930 II )with necessary connecting accessories of
same material at required depth in existing trench for laying of cable. below 420.00 Mtr. 62.62
ground / road surface for enclosing cable (A) 50 mm Outer dia
176 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for
PVC insulated armoured cable complete with out going tails, insulating tape etc for 44.00 Nos. 38.38
following size of cables.(c) 2 to 4 core 6 Sq. mm
177 Providing and, fixing heavy duty flange type brass double compression type cable
gland with rubber ring for PVC insulated armoured cable complete with out going
tails, insulating tape etc for following size of cables.(B) 3 & 1/2 core 35/50 Sq. mm 4.00 Nos. 75.75
178(a) Solder less crimping type Aluminium lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an approved manner.(A) 1.5/
179 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double
ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep
complete having 3blades with aluminium blades with , canopy & 30 cm. down rod 57.00 Nos. 1948.29
erected with earthing.(Make shall be approved by Engineer in charge))
180 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down
rod erected duly painted for fan complete with proper insulation without leakage 57.00 Mtr. 108.07
181 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC
bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /
Heavy Duty PVC box complete erected concealed in Ceiling with necessary 57.00 Nos. 108.07
182 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.
183 Supplying & erecting approved make low noise decorative exhaust fan having
square frame ABS body with inbuilt lowers & square frame. 200mm with 1350 RPM 10.00 Nos. 1366.53
184 Providing recess in wall or window frame suitable for erection of Exhaust fan
complete with plastering and colour washing to match the colour of the wall or
window c0omplete with expanded metal in order to render the fitting in accessible 10.00 Nos. 189.88
and the room water-proof.
185 Supplying and erecting approved make Octagonal pole made from HR sheet steel.
The pole should be made as per IS. and shall be coated with hot dip galvanizing as
per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction
box consist of terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for
cable termination to be erected With Suitable foundation (Included) as per details 22.00 Nos. 8192.11
given by manufacturer considering site requirement. (D) 6 Mtr. Long 70 mm Top X
135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-
M20 Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole weight 59 kg.
186 Supplying & erecting approved make SMC press moulded composite FRP. loop-in,
loop-out approx. 2mm thick box complete with Bakelite connector strip
5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement
having locking arrangements with mounting clamp with nuts, bolts & washers 2.00 Nos. 476.72
suitable for erection on pole with cable clamps& earth bolt of following size of box.
(c)150mm x 125mm x 100mm [deep]
187(a) Supplying and erecting Street light pole bracket comprising main B Class GI pipe of
4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of
approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top
having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length
with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple
with check nut complete painted with one coat.of Red oxide / PU base primer and
two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single Arm
bracket 0.5 Mtr
187(b) [B] Double Arm Bracket 0.5 Mtr 8.00 Nos. 622.16
188 Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel
of following capacity for switch On-Off street lights on time scheduling basis made
from 16G CRCA sheet duly epoxy power painted inside and outside with hinged
doors and locking arrangement consisting of suitable size of 4 Pole MCB and 4 pole 2.00 Nos. 12399.77
contactor (cat-III)with analog time switch, auto manual switch of same make and
suitable input and output Bakelite terminals and with door earthing approved by
Engineer in charge.(A) 32 Amp
189 Supplying and erecting approved make panel mounting type Digital Voltmeter
having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel 2.00 Nos. 1275.63
board with all connection, wiring etc .with manufacturers calibration certificate.
190 Supplying and erecting approved make panel mounting type Digital Ammeter
having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps
suitable to operate on 500 Volt AC , erected on existing panel board with all 2.00 Nos. 1558.43
connection, wiring etc .with manufacturers calibration certificate.
191 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC
Supply 500 V on existing panel board with necessary connections. 4.00 Nos. 317.14
192 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5
ratio 15 VA burden erected in existing CRCA box duly secured with insulating 6.00 Nos. 274.72
materials connected to the meter
193 Supplying and erecting approved make suitable panel indicator LED type lamp, lens
cover, complete erected with necessary connections. 6.00 Nos. 43.43
194 Providing & erecting open well horizontal mono block pump set with cast iron
body, complete for three phase submersible motor having.[D] For 5 HP 3 phase
open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 4.00 Nos. 18746.61
to 42 Mtr head suitable for 50/65 mm dia delivery pipe.Cat.II
195 Supplying & erecting approved make motor control cubical panel [Star delta] made
from 16G CRCA sheet duly epoxy powder painted inside and outside with hinged
doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main
fuses. Digital volt and current meter (in a single unit) with micro controller based
control unit and current sensing single phasing preventer electronic overload
protection, over voltage (Programmable) protection and under voltage
(Programmable) protection, prod less dry run protection programming facility for 4.00 Nos. 7250.79
setting of all parameter like overload current, high voltage limit, low voltage limit,
dry run limit with digital indication on seven segment LED display for any fault like
over load, high voltage, low voltage, dry running single crimped, electronic star
delta timer, feather touch start / stop push buttons to be erected on angle iron
frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make only)(A)
DOL up to 5.0 H.P.
196 Lowering of submersible motor pump set at the depth of following ,complete with
required. Nos. and size of casing pipes erected by means of proper chain pulley
block & pipe wrenches after checking of threads of each pipe with coupling to take
the load of the pump set and pipe assembly filled up with water (D)For Open well
Horizontal submersible pump set for sump well (i) 1 HP to 5 HP
197 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible
Submersible copper cable approved make of following Size.(B) 3 Core x 2.5 Sq. 60.00 Mtr. 104.03
198 Supplying of following size of HEAVY UPVC column pipe with coupler and wire
lock.[B] 50 mm dia
In Word : Three Crore Sixty-One Lakh Forty-Eight Thousand Five Hundred Fifty-One Rupees and Forty-Five Paise Only.
I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned
above. Amount of my /our tender works out as under.
* Estimated Amount * Estimated Amount
put to tender put to tender
Deduct :…………% Below Add :………%Above
In Words …………………………………… In Words………………………………
* (Please strike out whichever is not applicable).
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no
extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the
cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the
5 The amount of dismentalled credit materials at Rs. 441800 shall be deducted from first R.A. Bill.
6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved From
the Engineer In Charge.
Deputy Executive Engineer Executive Engineer
Const. (R&B) Sub Division Rajpipla (R&B) Division
Dediapada Rajpipla
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
000 E Tender Notice.pdf
1 Vol 1 SBD Book.pdf
2 VOL 2 Specification index.pdf
3 VOL 03 SBD Book.pdf
4 Building Booklet.pdf
5 GR New.pdf
6 BOQ.pdf
8 Drawing.pdf
condition of Nominated Contractor E1 Class.pdf
Contractor Registration Paripatra.pdf
ELECTRICAL GR.PDF
Liability period GR.pdf
Make LIst Joint Tender From Division.pdf
Memorandum of Understanding.pdf
STANDARD BIDDING DOCUMENT PROCUREMENT OF ELECTRICAL WORK.pdf
Download all tender documents and submit your bid