WBMAD/NDDM/ELC/NIeT261/25-26_1

Supplying and delivery of 120 W LED street light, new generation energy saving and environmental friendly lonhg life versatile pressure die cast aluminium housing IP66 and impact resistant of IK07, road way luminarie with high power LED. CHIP. Make - CREE / NICHIA / LUMILEDS / OSRAM / SEOUR, confirming to Technical specification and latest accreditation. LM - 79 and LM -80 report to be provided from any NABL accredited Lab. system efficacy > 115 Lumens / watt LED should be warrantee for 5 years.

Supplying and delivery of 110 W LED flood light, new generation energy saving and environmental friendly lonhg life versatile pressure die cast aluminium housing IP66 and impact resistant of IK07, with high power LED. CHIP. Make - CREE / NICHIA / LUMILEDS / OSRAM / SEOUR, confirming to Technical specification and latest accreditation. LM - 79 and LM -80 report to be provided from any NABL accredited Lab. LED should be warrantee for 5 years. Make - Philips / Magik / Benlo.

Fixing only flood light, fitting with suitable tie clamps and MS plate for mounting on pole / tower or similar structure.

Fixing only flood light, fitting with suitable tie clamps and MS plate for mounting on pole / tower or similar structure.

Laying only cable upto 50 sqmm through existing RCC / Hume / GI pipe / open masonary trench for single, 2, 3, 3.5 & 4 core.

Supply high density polythene pipe complete as necessary and as per direction of EIC. Confirming to IS 4984/1985, 6 Kg. / sqcm, 40 mm dia, 3 mm thick polythene pipe.

Supply and fixing medium gauge GI pipes (ISI medium) protection with necessary fitting and jointing materials as required, 40 mm dia GI pipe.

Supply, delivery and laying 3 core 1.5 sqmm flexible wire as per IS 694 (connection for pole to light fixture), Make - Incab / Gloster / Polycab / Havells.

S & F compression type blank complete with brass gland, brass ring and rubber ring for dust and moisture proof entry of XLPE / PVC armoured cable as below, for 4 core, 16 sqmm.

Supplying & Erection of mini size feeder piller box of size (918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable MS Angle. The PB have double hinge door at the front & back with suitable locking arrangement. The box will painted by 2 coates of aluinium paint over 1st coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion covred by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand and drawing & direction of EIC.

Supply and fixing 415 Volt TPN Fuse with sheet steel enclosure on flat iron frame on wall with nut bolts etc. incl. S & F 3 nos. DIN type HRC fuse, 32 Amp., Havells.

Supply & fixing of 240 / 230 Volt, 50 Hz, T. P. Power contractor, (make L & T / ABB / Schneider / Simence / GE) having contact block of the following range, 18 - 30 Amp., 1NO/1NC.

Supply and delivery of electronic driver suitable for 240 / 360 / 415 V, 50 Hz (Make - L & T / ABB . Schneider / Simence / GE / Minilic) of the following time (second )range 3.0 to 30.0.

Supply and fixing Toggler switch (On - off - on).

Supply and fixing of 230 / 240 Volt, LED indicating lamp (Make - AE / KAPPA / IMP), blue / white colour.

Supply and fixing of terminal block.

S & F 240 Volt MCB of breaking capacity 10 KA and C characteristics on Din rail of existing DBs and necessary connection, Make - Havells, SP, 6- 32 Amp.

S & F 415 Volt MCB of breaking capacity 10 KA and C characteristics on Din rail of existing DBs and necessary connection, Make - Havells, FP, 32 Amp.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 mtrs. Long and 1 x 4 SWG GI (Hot Dip) wire (4 Mtr. Long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers including S & F 15 mm dia GI pipe protection ( 1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs. below the ground level as as below : by ISI medium GI pipe.

Supply & fixing of special head type MS loop box (3 mm thick) with connecting bar and other accessories fixed on the top of the pole as required and as per direction of EIC for 3 phase connection.

S & F 240 V MCB of breaking capacity 10 KA and C characteristics on din rail of exisiting DBs and necessary connection. (Make - Legrand).

Sub Total