Construction of Boiler House for NTPHC Shakar

Amount

Earth work in excavation by mechanical means in trenches for foundations, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: as per details annexed in annexure D (Schedule of Quantity)

1. All kinds of Soil (80% of total)

2. Ordinary Rock (20% of total)

Providing and lying in position Plain cement concrete of specified grade M7.5(1:4:8) using 40mm nominal size nallah aggregate excluding cost of centering and shuttering. as per details annexed in annexure D (Schedule of Quantity)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in M15 (1:2:4) mix. as per details annexed in annexure D (Schedule of Quantity)

Reinforced cement concrete work, columns, pillars, upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement in M20 (1:1.5:3) mix. as per details annexed in annexure D (Schedule of Quantity)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level using (M10) 1:3:6 ratio. 40mm nominal size aggregate. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3(1 cement:3coarse sand) cost of required shuttering,centering and complete.1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) as per details annexed in annexure D (Schedule of Quantity)

Providing and lying of cement concrete work in the Lintels/beams, suspended floors, roofs all over in of specified grade M20(1:1.5:3) using 20mm nominal size crushed stone aggregate excluding the cost of centering and shuttering. as per details annexed in annexure D (Schedule of Quantity)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastenersof required diameter and length (hold fast lugs or with dash fasteners shall be paid for separately) using Second class kail wood. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm Shutter Thickness in Second Class Kail Wood. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing bright finished brass handles with screws etc. complete using: as per details annexed in annexure D (Schedule of Quantity)

125 mm size for Doors:

100 mm size for Windows:

Providing and fixing bright finished brass tower bolts(barrel type) with necessary screws etc. complete. as per details annexed in annexure D (Schedule of Quantity)

150x10 mm for Doors:

100x10 mm for Windows:

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : as per details annexed in annexure D (Schedule of Quantity)

Size: 250x16 mm

Providing and Fixing of 4mm thick glass panes for windows including 1st class kail wood beadings of required size with necessary screws and nails. (lmr) as per details annexed in annexure D (Schedule of Quantity)

Formwork for concrete casting including strutting, propping removal and stacking. as per details annexed in annexure D (Schedule of Quantity)

R/F of RCC work including cutting placing in complete Job. Thermo-Mechanically Treated bars of grade Fe-500D or more @1.2Quintal per cum of RCC. as per details annexed in annexure D (Schedule of Quantity)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m as per details annexed in annexure D (Schedule of Quantity)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excludingthe cost of nosing of steps etc. complete, using 40mm thick with 20mm nominal size nallah stone aggregate. as per details annexed in annexure D (Schedule of Quantity)

12mm Cement plaster of mix 1:4 (1 Cement: 4 Sand) using fine sand, outside and inside surfaces of the building. as per details annexed in annexure D (Schedule of Quantity)

20 mm DIA

Providing and fixing electrical fittings. Complete job. as per details annexed in annexure D (Schedule of Quantity)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing following modular switch/ socket on the modular plate & switch box including connections as required. as per details annexed in annexure D (Schedule of Quantity)

5 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

8 watt led concealed

Wiring for heating point with 6 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. As required. as per details annexed in annexure D (Schedule of Quantity)

Proving and Installation of Exhaust Fans of approved make as per engineer Incharge as per details annexed in annexure D (Schedule of Quantity)

P&F Electric Control Board: double door with required MCBs, DP, Change over and all other accessories. As per building requirement. Including testing commisioning complete job. as per details annexed in annexure D (Schedule of Quantity)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded @6kg/sft as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing corrugated GI Sheet roofing fixed with polymer coated J or L hooks, bolts and nuts 8mmdiawith bitumen and GI limped washers filled with hitelead and incl. a coat of approved sheet primer and two coats of approved paint on overlapping of sheets completely(upto pitch of 60*)excl. the cost of purlins,rafter and trusses 0.50 mm thick with zinc coating not less than 275 gram/sqm including cutting to size and shape wherever required. as per details annexed in annexure D (Schedule of Quantity)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer. as per details annexed in annexure D (Schedule of Quantity)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm). as per details annexed in annexure D (Schedule of Quantity)

Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). as per details annexed in annexure D (Schedule of Quantity)

Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works . as per details annexed in annexure D (Schedule of Quantity)

Providing and Fixing Sanitary Items: Providing and Fixing of PVC pipe prince make type-B including fixing at required position jointing with PVC washers and solvent including all accessories complete. (lmr). as per details annexed in annexure D (Schedule of Quantity)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20mm thick bed of cement mortar 1: 4(1 cement:4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. as per details annexed in annexure D (Schedule of Quantity)

Electrical cable Providing and fixing PVC insulated un-armoured copper conductor cables from main panel board to various equipments to be laid over cable trays with appropriate clamps and fixing arrangements as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing PPR Unions 25mm. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing brass bib cock of approved quality. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 20 mm nominal bore. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931. as per details annexed in annexure D (Schedule of Quantity)

Providing & fixing water closet squatting pan(Indian typeWC type) with 100 mm sand cast iron “S” or “P” trap,10 liter low level white P.V.C. flushing cistern, including flush pipe(of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. including cutting and making good the wall and floors wherever required. white vitreous china orrisa pattern W.C. pan of size 580x440mm with integral type foot rest. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing bathroom accessories set (soap case, towel rod, cabinet mirror, hooks etc) directed as per site in charge. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing wash basin with C.I bracket, 15mm dia cp brass single hole basin mixer of approved quality and make, i/c painting of fittings and brackets, cutting and making good the wall wherever required- white vitreous china wash basin size 550x400mm with a 15mm cp brass single hole basin mixer and 32 mm dia C.P brass trap. as per details annexed in annexure D (Schedule of Quantity)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for reception of pipes and fittings. as per details annexed in annexure D (Schedule of Quantity)

Providing & fixing pvc waste pipe for sink flexible pipe 32mm dia. as per details annexed in annexure D (Schedule of Quantity)

P/F high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. as per details annexed in annexure D (Schedule of Quantity)

Carriage of different material from source to site of work. as per details annexed in annexure D (Schedule of Quantity)

Carriage of cement and Steel by MT at an avg lead of 80 kms

Carriage of Sand and Bajree at an avg lead of 20 kms

MS Mohammad

M/S GULZAR HUSSAIN

M/s SADIQ ALI

M/S GRK ENGINEERING

M/S MOHD MOHMAD KHAN