Cylindrical Roller Bearing with Angle Ring, SKF No: NH 318 ECM C4 VA301 or Schaeffler No.NJ318E.M1.C4.F1+HJ318E.F1.

Special Eligibility Criteria

1. 1

   Bulk procurement of the tendered item is reserved from RDSO approved Sources (RDSO item ID: 3100283 as available in U-VAM) as per clause 3.0 of I General Tender Conditions of South Central Railway attached with bid. The Authorised dealers must upload tender specific authorization in proper format [ preferably as per Annexure II of General Tender Conditions of South Central Railway] failing by which their offer will be summarily rejected.

   Document optionalConfirmation required

Check List

1. 1

   Please go through Tender eligibility criteria before submission of offer
2. 2

   Please go through Instructions to tenderers and General tender conditions of Tender before submission of offer. Having participated in the tender, it will be considered that you have gone through all the conditions and the same are accepted by you

Commercial-Compliance

1. 1

   Firm agrees to pass on such additional set off / input tax credit as may become available in future under the GST provisions in respect of all the inputs used in the manufacture of the tendered item on the date of supply, by way of reduction in price and advise the purchaser accordingly.

   Document optionalConfirmation required
2. 2

   Firm must indicate the HSN code and GST number of their firm. Purchaser will not be responsible for any misclassification of HSN number or incorrect GST rate quoted by firm .The offer shall be evaluated based on the GST rate as quoted by firm and same will be used to determining the interse ranking. The vendor shall be responsible for correct HSN code and GST rate

   Document optionalConfirmation required
3. 3

   The following undertaking to be confirmed by bidder while submitting the bid. I/we hereby certify that none of our allied/sister concerns/affiliated firms have/had participated other than the current bid in this tender for item wise-consignee wise evaluation. I/we understand that as per IRS clause 2500, the involvement of the bidding firm or any of its affiliates in more than one bid for the same item/consignee in the procurement is considered a conflict of interest and a violation of the code of integrity. I/we have read and understood the special condition related to IRS clause 2500 in the tender document. If I am/we are found to violate the said clause, I/we understand that I am/we are liable to face penalties as stipulated in IRS clause2505, which includes rejection and exclusion from the tender process, apart from other penalties

   Document optionalConfirmation required
4. 4

   In case of road delivery, the date of delivery at destination[consignee's end] shall only be treated as delivery date irrespective of F.O.R. / F.O.T. condition mentioned elsewhere in the contract / tender.

   Confirmation required
5. 5

   [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever,the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number,under SVC.

   Document optionalConfirmation required
6. 6

   1) Bidders are instructed not to indulge in any anti-competitive practices. As per the provisions of Competition Act,2002, Railways can make a reference to the Competition Commission of India for making an enquiry in case of suspected anti- competitive behaviour by the bidders. 2) Collusive bidding, Bid Rotation, Bid Suppression, Complementary bidding, Market Allocation and Sub-contracting arrangements fall under the purview of"Bid rigging" which would cause appreciable adverse effect on competition. 3) Competition Commission of India can impose heavy penalties such as: Penalty up to 10% of the average turnover for the last three preceding financial years upon each of such enterprises which are parties to bidrigging and can even order the parties to cease and desist

   Confirmation required
7. 7

   Bidder shall accept the following declaration [Land Border condition] by quoting "YES" against 'Conf. allowed" or"Complied" column for compliance of Office Memorandum of Department of Expenditure, Ministry of Finance OM No.F.No.6/18/2019- PPD dated 23.07.2020. If such certificate given by a bidder whose bid is accepted is found to be false, this would be a ground for immediate termination and further legal action in accordance with law. "I HAVE READ THE CLAUSE REGARDING RESTRICTIONS ON PROCUREMENT FROM A BIDDER OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA. I CERTIFY THAT THIS BIDDER IS NOT FROM SUCH A COUNTRY OR , IF FROM SUCH A COUNTRY, HAS BEEN REGISTERED WITH THE COMPETENT AUTHORITY. I HEREBY CERTIFY THAT THIS BIDDER, FULFILLS ALL REQUIREMENTS IN THIS REGARD, AND IS ELIGIBLE TO BE CONSIDERED. (WHERE APPLICABLE, EVIDENCE OF VALID REGISTRATION BY THE COMPETENT AUTHORITY SHALL BE ATTACHED.)''

   Document optionalConfirmation required
8. 8

   FOR - DESTINATION BY ROAD. Accordingly, the firms are advised to quote on "FOR - DESTINATION BASIS BY ROAD"AND OFFERS WITH DEVIATIONS ARE LIABLE TO BE IGNORED.

   Confirmation required
9. 9

   Tenderers to acknowledge having read and also accept the"IRS CONDITIONS OF CONTRACT", "GENERAL TENDER CONDITIONS", "INSTRUCTIONS TO TENDERERS FOR E-TENDERS" attached to this tender document

   Confirmation required
10. 10

    PURCHASE PREFERENCE TO MICRO AND SMALL ENTERPRISES (MSEs): Purchase preference will be given to MSEs as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference for MSEs, the bidder must be the manufacturer of the offered product. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. RELEVANT DOCUMENTARY EVIDENCE(UDYAM REGISTRATION CERTIFICATE) IN THIS REGARD SHALL BE UPLOADED ALONG WITH THE BID IN RESPECT OF THE OFFERED PRODUCT TO AVAIL THE BENEFITS UNDER MSE. Please refer para 15 of "General Tender Conditions"attached with this tender document for further details regarding "BENEFITS OF MSE AS PER PUBLIC PROCUREMENT POLICY".

    Document optionalConfirmation required
11. 11

    The Bidder confirms that other than financial terms,deviations (if any) to be quoted in the relevant columns of technical deviation and commercial deviation template provided on techno-commercial offer form . Deviations, if any, quoted at any other places, are liable to be ignored.Firm may note that conditions deviating from the tender conditions/ description/specifications may render the offer liable to be passed over

    Document optionalConfirmation required
12. 12

    Validity of the offer should be 90 days.

    Confirmation required
13. 13

    Restrictions under Rule 144(xi) of GFR-2017: A)I have read the clause regarding Restrictions under Rule 144 (xi) of GFRs.2017 on procurement from a bidder of a country which shares land border with India and as detailed in Tender documents. B) I certify that this border is not from such a country or, if from such a country, has been registered with the Competent Authority. C) I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. [wherever, applicable, evidence of valid registration by the competent authority shall be attached]. Note: If the tenderers are not agreeable to above declarations, they have to categorically mention about the disagreement in Techno Commercial Deviation or may upload declaration about disagreement.
14. 14

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted. Validity will be reckoned from the closing date of tender.

2. 2

   Firms are expected to quote for a quantity not less than 50% of the tendered quantity. Offers received for quantity less than 50% of tendered quantity will be considered unresponsive and will be summarily rejected