Karnataka

Active

Works

Water supply/sewage lines

Construction of Community Toilet at Matur village in Maski Taluka of Raichur District (SC Reserved)

Rural Drinking Water and Sanitation Department

RWSSD Division Office Raichur | Raichur, Karnataka

Amount: ₹21.2 LCloses: 1 Oct 20264d left

Timeline

Published23 Sept 2026
Closes1 Oct 2026

Tender Value

₹21.2 L

EMD Value

₹25,000

Closing Date

1 Oct 2026, 4:30 pm4d left

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

Basavaraju AE

Mobile Number

Work Description

Construction of Community Toilet at Matur village in Maski Taluka of Raichur District (SC Reserved)

Tender Information

Tender ID

RWSSD/2026-27/WS/WORK_INDENT10666

Reference Number

RWSSD/2026-27/WS/WORK_INDENT10666

Tender Type

Reserved

Product Category

Water supply/sewage lines

Form of Contract

Electronic Documents, First(One Cover)

Location

RWSSD Division Office Raichur

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredSC Category reservation certificate

RequiredDomicile certificate for more than 10 years in Karnataka State

RequiredContractor Registration Certificate

RequiredAnnual Turnover Certificate from 2021-22 to 2025-26 by CA for Five years along with UDIN Number & Minimum financial turnover in all classes of civil engineering construction works not less than one times the annual payments from this contract

Requiredany construction works Work done certificate 25 percentage financial workdone certificated form not below rank of Executive Engineer in last five years as per bid document

RequiredAccurate postal address, Principal place of address, Mobil Number and email address Pan No, Tin No, should be mentioned clearly

RequiredList of existing commitments and ongoing works

RequiredA Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

RequiredAssessed bid capacity as per Bid Document on letter head duly signed

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidders shall not be under declaration of ineligibility for corrupt and fraudulent practices issued by any State Government/Government of India/Union Territory.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e- procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No. PW/134/bmS/2007 Dated 27.7.2007, a sum amounting to 1 percentage of the bill amount will be deducted towards Construction Labour Welfare fund.

All rates shall be exclusive of GST, but inclusive of Royalty for minor minerals, Karnataka Building and other Construction Workers Welfare cess ), Shall be included in the rates, prices and total Tender Price submitted by the Tenderer.

The rates quoted by the Contractor shall be exclusive of GST. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law.

Conditional tenders will not be accepted.

GST shall be paid as per the prevailing rates

The work will be inspected by the Third party and the bill will be admitted only after the satisfactory report from the third party along with GPS photos.

Financial Year will be reckoned as the period between first day of April and thirty first day of march of succeeding year (both days inclusive).

The Employer reserves the right to acceptance/reject any or all Tenders without assigning any reason.

The tenderer should maintain the scheme during the defective liability period i.e., one year from the date of completion.

The Department is not responsible for any delay in accessing e-procurement portal.

Tenderer shall note that the Tenders of those found Eligible as mentioned in cause 3 - Qualification of the tenderer in section 2 : Instructions to Tenderers (ITT). Will be considered for evaluation.

The Tenderer shall scan & upload all the original recent and relevant documents required for this bid to the e-procurement portal The Original Documents should be produced at the time of opening of bid for physical verification. If necessary.

It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc.,

Period of completion is as mentioned in the bid document, which includes rainy season.

The contractor should follow terms and conations as specified in standard bid document wherever is applicable.

The Contractor should submit 3rd party reports and GPS photos along with the bill otherwise bills will not be accepted.

Bidder should quote the rate excluding GST amount.

The increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

The Tenderer at his own responsibility and risk is required to visit and examine the site of works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the works. The cost of visiting the site shall be at the Tenderer own expense.

Bidder should possess Unconditional Credit Line Facility of as per bid document from nationalized / scheduled bank and shall submit the certificate in the prescribed format only issued by the FD on dated 22.08.2022

Conditional LOC will not accept.

Annual turnover for the past five / relevant financial years should be certified by an ICAI registered Chartered Accountant. The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number legible along UDIN number and should be active.

The documents which are uploaded by the bidder should be well scanned.

All documents related to bid document are to be submitted mandatorily

Corrigendums/modification/correction, if any, will be published in the website only.

If any date in the tender time table is government holiday, next working date will be considered.

Pipes which are used for the work are tested by CIPET report is must for the payment and CIPET payment shall be made by the contractor.

After completion of the FHTC and HTC work, the works to be handed over to the gram panchayat for its further maintenance.

Final bill will be admitted only after the submission of 3rd party report, handing over certificate and completion report with the work display board.

Bidders are bond the guidelines/instruction issued time to time from the government.

This tender is covered under World Bank Guidelines on preventing and combating fraud and corruption in program for results financing dated February 1, 2012 and revised on July 10, 2015 https://ppfdocuments.azureedge.net/3682.pdf. Requirements under these guidelines include but are not limited to 1st the borrowers obligation on informing the World Bank about all fraud and corruption related allegation and investigations, 2nd the World Banks right to conduct administrative inquires, and 3rd Ineligibility of debarred firms for contract awards. The latest firms list of the banks debarred firms is available https://www.worldbank.org/en/projects-perations/procurement/debarred-firms

If the bidder fails to complete the work within the timeline fixed by the department, then, those tenderes EMD/FSD will be forfeited and the contract will be rescinded at his risk and cost.

The Bidder/Contractor must provide the CIPET Test Report for the Pipes in his own cost before starting of work.

Fund for JJM works GOI & GOK Fund 90% and Community Contribution 10%

The work should be carried out in accordance with the standard specifications specified by the department.

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards must be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Contractor should make an agreement within 20 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost.

Any over writing of civil engineering words and measurements should be clarified the considered department -No claims should be considered.

Corrigendums / modifications / correction, if any, will be published in the website only. More details should be collected from the office at working hours

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

Recent and relevant Certificates and details shall be furnished & Contractor Conditional tenders are not accepted

Third party consultants may be engaged for checking quality and quantity of work and to prevent any misuse. Proper reporting methods, through these agencies and their comments to be reviewed / addressed immediately at District level. Quality of work is of most importance.

All other conditions as per the bid document.

The contractor shall complete the entire work in all respects within 45 (Forty-Five) days from the date of issue of the Work Order / Agreement. Time shall be considered as the essence of the contract. The contractor shall be fully responsible for timely completion of the work and shall deploy sufficient manpower, machinery, and resources to achieve the stipulated schedule.

Fee & Financial Details

Tender Fee Amount

₹530

EMD Fee Amount

₹25,000

Important Dates

Last Activity

23 Sept 2026

Published

23 Sept 2026

Download Ends

30 Sept 2026

BOQ Preview

•

Construction of Community Toilet at Matur village in Maski Taluka of Raichur District (SC Reserved)

•

Construction of Community Toilet at Matur village in Maski Taluka of Raichur District (WORK CODE-RCH25191801925-SCP) (SC Reserved):-CONSTRUCTION OF BUILDING: Earth work excavation for Foundation by me...

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Additionalities for Formwork, Centering & Scaffolding for isolated footings etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of ...

•

Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering etc., complete as per specification, design and drawings including cost of all material, labour charges an...

•

Additionalities for Formwork, Centering & Scaffolding for Plinth Beams of Buildings etc., complete as per specification, design and drawings including cost of all material, labour charges and hirechar...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) etc., complete as per specification, design and drawings including cost of all material, labour charges ...

•

Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts etc., complete as per specification, design and drawings including cost of all material, labour char...

•

Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueduct etc., complete as per specification, design and drawings including cost of all material, labour charg...

•

Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of mach...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

roviding 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of ma...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm etc., complete as per specification, design and drawings including cost of ...

•

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2...

•

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-inc...

•

Providing & fixing of louvered ventilator made out of multi chambered PVC( Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with pain...

•

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

CONSTRUCTION OF WATER STORAGE SUMP:- Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shorin...

•

Additionalities for Formwork, Centering & Scaffolding for Earth retaining structures etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecha...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

CONSTRUCTION OF SEPTIC TANK:- Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

WATER SUPPLY & SANITATION WORKS:- Providing and placing on terrace (at all floor levels), polyethylene water storage tanks IS: 12701 marked, with cover and suitable locking arrangements and making nec...

•

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of...

•

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, i/c including fixing the p...

•

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

•

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

•

Providing PVC 110mm dia ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linkin...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...

•

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accessories etc., complete as per specification, design and drawings including cost o...

•

ELECTRIFICATION WORKS:-Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood ...

•

do- 25mm dia 2mm thick etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the...

•

Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ce...

•

Supplying heavy gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cemen...

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insu...

•

do- Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharg...

•

do- Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharge...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...

•

do- 2.5sqmm. etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-i...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps One way switch etc., complete as per specification, design and drawi...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying of .feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Pow...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...

•

Supplying & fixing retrofit type -PL- LED Lamp .......W LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM...

•

Supplying and fixing Trivector Meter suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. etc., complete as per ...

•

SUBMERSIBLE PUMP:-Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructio...

•

Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proo...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. etc.,...

•

Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark etc., complete as per spe...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. etc., complete ...

•

DRILLING OF BOREWELL:- Sinking of Borewell of 165mm dia clear using super fast hydraulic rigof capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casi...

•

do- Borewell Depth of 50 to 100 m etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as direc...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joi...

•

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia etc....

•

PUMPING MACHINERY FOR BOREWELL:- Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as...

•

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. 63mm etc., complete as per specification, design and d...

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm etc., complete as per specification, design and drawings including ...

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50mm etc., complete as per specification, design and drawings...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analo...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well...

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., co...

•

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of ...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

9 KW 2 SC Matur_10666.doc

Tender Document • 0.22 MB

Tender KKRDB 1126.pdf

Instructions to Tenderers • 1.98 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Water supply/sewage lines

Construction of Community Toilet at Matur village in Maski Taluka of Raichur District (SC Reserved)

Rural Drinking Water and Sanitation Department

RWSSD Division Office Raichur | Raichur, Karnataka

Amount: ₹21.2 LCloses: 1 Oct 20264d left

Timeline

Published23 Sept 2026
Closes1 Oct 2026