NANMINDA GP VANITHA VYAVASAYA KENDRAM DWSS

Amount

Tank base construction

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.3.1:20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Pipe line work

OD98126/2022-2023:Excavation trenches of required width of pipes .cables etc. including excavation for sockets and dressing of sides /ramming of bottoms,depth up to 1.5m including getting out the excavated soil and then returning the soil as required in layers not exceeding 20cm depth incliding consolidating each deposited layers by ramming watering and disposing of surplus excavated soil as directed within alead of 50m all kind of soil

OD98114/2022-2023:Providing and fixing PVC pipe fittings including jointing of pipe with one step solvent cement and testing of joint complete as per directions 63mm dia 10kgf/cm2

OD98117/2022-2023::Providing and fixing 65mm 80 SW PVC u ASTM pipes includings jointing of pipes with one step PVC solvent cement etc. complete as per direction of Engineer in Charge.(Modefied 50.18.9.7.2

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

OD98129/2022-2023::Providing and fixing 40 mm dia 10Kgf/cm2 PVC pipes includings jointing of pipes with one step PVC solvent cement, joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2(modified 50.183.2.2 without trenching & refilling )

OD98131/2022-2023: :Providing and fixing 32 mm pvc pipes 10kg/cm2 including jointing of pipes with one step pvc solvent as per direction of enginear in charge (MOIFIEDS 50.18.9.4.1 WITH OUT TRENCHING AND REFILLING

OD98134/2022-2023:Providing and fixing 25 mm dia PVC Pipes 10kg/cm2 including jointing of pipes with one step solvent cement as per direction of enginear in charge (MODIFIED 50.189.3.2 WITH OUT TRENCHING AND RE FILLING)

OD98144/2022-2023: :Supplying and fixing 63 mm dia pvc valve including allcost

18.19.5.1:Providing and fixing gun metal non-return valve of approved quality (screwed end): 65 mm nominal boreHorizontal

18.17.5:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

OD98390/2022-2023::Supplying and fixing 32 mm dia pvc valve including all cost

18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

18.19.1.2:Providing and fixing gun metal non-return valve of approved quality (screwed end): 25 mm nominal boreVertical

OD255270/2022-2023:Providing and fixing wash basin with C.I. brackets, 15 mm PVC pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm PVC pillar taps

50.18.8.7.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2

OD274108/2022-2023:Providing and fixing PVC valve of approved quality 40 mm nominal bore (modified data of 18.17.3 )

VISWANATHAN K

Bidder Name

MOIDEENKOYA PP

VISWANATHAN K