Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹31.2 L+₹76,069.45 (2.50%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹33.9 L+₹3.4 L (11.3%)Rejected-AOC VILL P O DARGIA SAKRI TEHSIL DEHRA DISTT KANGRA HP | MANDI | HIMACHAL PRADESH | 175013 | L3 | Rejected-AOC L3 | |
| 4 | L4₹35.0 L+₹4.6 L (15.2%)Rejected-AOC | L4 | Rejected-AOC L4 | |
| 5 | L5₹35.6 L+₹5.2 L (17.1%)Rejected-AOC | L5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | Parminder Kumar L6 | HR CONTRACTOR L5 | Tek Chand L3 | SHEHWAJ KHAN L1 | shashikant L8 | ARNAV INFRAZONE PRIVATE LIMITED L7 | SRK INFRATECH L4 | Abhishek Kashyap L2 | Lal Singh L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock | 357.93 | Cubic Metre | 220 ₹78,744.6 | 300 ₹1,07,379 | 200 ₹71,586 | 200 ₹71,586 | 250 ₹89,482.5 | 231 ₹82,681.83 | 170 ₹60,848.1 Lowest | 250 ₹89,482.5 | 345 ₹1,23,485.85 |
| 2.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level complete in all respect as per satisfaction of Engineer-in-Charge. 1:5:10 (one Cement : five sand : ten graded stone aggregate 40 mm (forty milimetre) nominal size | 148.25 | Cubic Metre | 4,000 ₹5,93,000 | 4,600 ₹6,81,950 | 4,000 ₹5,93,000 | 3,500 ₹5,18,875 | 4,500 ₹6,67,125 | 4,900 ₹7,26,425 | 4,200 ₹6,22,650 | 3,000 ₹4,44,750 Lowest | 5,700 ₹8,45,025 |
| 3.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 1:2:4 (One cement : two coarse sand) : four graded stone aggregate 20 mm(Twenty milimetre nominal size). | 28.48 | Cubic Metre | 6,200 ₹1,76,576 | 6,500 ₹1,85,120 | 6,000 ₹1,70,880 | 4,500 ₹1,28,160 Lowest | 6,500 ₹1,85,120 | 5,900 ₹1,68,032 | 6,600 ₹1,87,968 | 5,000 ₹1,42,400 | 9,500 ₹2,70,560 |
| 4.00 | Centering and shuttering including strutting, propping etc. and removal of form for etc. complete in all respect as per satisfaction of Engineer-in-charge. a). Foundations, footings, bases of columns, etc. for mass concrete. | 144 | Sequre Metre | 350 ₹50,400 | 250 ₹36,000 | 250 ₹36,000 | 220 ₹31,680 | 250 ₹36,000 | 250 ₹36,000 | 150 ₹21,600 Lowest | 350 ₹50,400 | 250 ₹36,000 |
| 5.00 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement work up to plinth level with 1:2:4 (one cement : two sand : four stone aggregate 20 mm (Twenty milimetre) nominal size) etc. complete in all respect as per satisfaction of Engineer-in-charge. | 32 | Cubic Metre | 6,200 ₹1,98,400 | 6,750 ₹2,16,000 | 6,000 ₹1,92,000 | 4,500 ₹1,44,000 Lowest | 6,500 ₹2,08,000 | 6,100 ₹1,95,200 | 7,400 ₹2,36,800 | 5,000 ₹1,60,000 | 9,500 ₹3,04,000 |
| 6.00 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Thermo-Mechanically Treated bars of grade Fe-500D or more. | 536.25 | Kilogram | 90 ₹48,262.5 | 95 ₹50,943.75 | 87 ₹46,653.75 | 78 ₹41,827.5 Lowest | 90 ₹48,262.5 | 79 ₹42,363.75 | 85 ₹45,581.25 | 85 ₹45,581.25 | 95 ₹50,943.75 |
| 7.00 | Providing and fixing 25 mm thick Prelaminated particle board flat pressed three layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, exterior grade in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer etc. complete in all respect as per satisfaction of Engineer-in-Charge (Fittings tol be paid for separately).(Actiontesa/ Century/ Green lam make) | 36 | Square Metre | 1,500 ₹54,000 | 1,800 ₹64,800 | 1,900 ₹68,400 | 1,800 ₹64,800 | 1,800 ₹64,800 | 1,800 ₹64,800 | 1,700 ₹61,200 | 1,800 ₹64,800 | 890 ₹32,040 Lowest |
| 8.00 | Providing and fixing 150 mm oxidised/ chromium plated M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws level etc. complete in all respect as per satisfaction of Engineer-in-Charge | 10 | Each | 50 ₹500 | 35 ₹350 | 2,000 ₹20,000 | 150 ₹1,500 | 75 ₹750 | 30 ₹300 Lowest | 120 ₹1,200 | 50 ₹500 | 200 ₹2,000 |
| 9.00 | Providing and fixing 100mm ISI marked oxidized/ chromium plated M.S. handles conforming to IS:4992 with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge | 20 | Each | 50 ₹1,000 | 58 ₹1,160 | 400 ₹8,000 | 85 ₹1,700 | 70 ₹1,400 | 35 ₹700 Lowest | 100 ₹2,000 | 50 ₹1,000 | 200 ₹4,000 |
| 10.00 | Providing and fixing 100x10 mm ISI marked oxidized// Chromium plated M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge | 10 | Each | 70 ₹700 | 400 ₹4,000 | 500 ₹5,000 | 85 ₹850 | 70 ₹700 | 40 ₹400 Lowest | 80 ₹800 | 480 ₹4,800 | 230 ₹2,300 |
Tender Value
₹33.1 L
EMD Value
₹66,500
Closing Date
18 Aug 2025, 10:00 amClosed
Executive Engineer
Dr. YS Parmar, UHF, Nauni Solan
Providing paver and drain COHF Thunag at Atal Aadarsh Vidhyalay Gudehari, Gohar Mandi
2025_YSPU_112016_1
No.UHF/Const.-1/Partfile /2025/-1344 dated 11.08.2025
Open Tender
Civil Works
Item Rate
90 days
Gohar
Please refer Tender documents.
4 documents required · 4 mandatory
₹3,000
EE Dr YSPU
₹66,500
23 Sept 2025
11 Aug 2025
18 Aug 2025
11 Aug 2025
18 Aug 2025
11 Aug 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level complete in all respect as per satisfaction of Engineer-in-Charge. 1:5:10 (one Cement : five sand : ten graded stone aggregate 40 mm (forty milimetre) nominal size
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 1:2:4 (One cement : two coarse sand) : four graded stone aggregate 20 mm(Twenty milimetre nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for etc. complete in all respect as per satisfaction of Engineer-in-charge. a). Foundations, footings, bases of columns, etc. for mass concrete.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement work up to plinth level with 1:2:4 (one cement : two sand : four stone aggregate 20 mm (Twenty milimetre) nominal size) etc. complete in all respect as per satisfaction of Engineer-in-charge.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and fixing 25 mm thick Prelaminated particle board flat pressed three layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, exterior grade in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer etc. complete in all respect as per satisfaction of Engineer-in-Charge (Fittings tol be paid for separately).(Actiontesa/ Century/ Green lam make)
Providing and fixing 150 mm oxidised/ chromium plated M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws level etc. complete in all respect as per satisfaction of Engineer-in-Charge
Providing and fixing 100mm ISI marked oxidized/ chromium plated M.S. handles conforming to IS:4992 with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge
Providing and fixing 100x10 mm ISI marked oxidized// Chromium plated M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823marked, exterior grade (Grade l Type ll), having one side decorative laminationand other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge).(Actiontesa/ Century/ Green lam make)
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. complete in all respect as per satisfaction of Engineer-in-Charge. a).In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing G.I. Pipes medium grade complete with G.I. fittings and clamps, i/c making good the walls etc. Internal work-Exposed on wall in all respect as per satisfaction of Engineer-in-Charge ( Jindal/ Surya make). a) 25 mm dia nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 Sintex marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank etc. complete in all respect as per satisfaction of Engineer-in-charge.
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x45 cm dry brick honey comb shaft with bricks and S.W.drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 etc. complete in all respect as per satisfaction of Engineer-in-charge
Constructing soak pit 1200 x 1200 x 1200 mm filled with brick bats including high pressure PVC pipe 110mm diameter and 1.20 meter long complete as per standard design in all respect satisfaction of Engineer-in-charge .
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature,jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including makingjoints with or without grooves (thickness of joints except at sharp curve shallnot to more than 5mm), including making drainage opening whereverrequired complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Providing and laying 60 mm (Sixty milimetre) thick factory made interlocking paver block of M-30 grade (ISI Marked) made by block making machine with strong vibratory compaction of approved size, design & shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. Complete in all respact as per direction of Engineer-in- Charge.
Providing and fixing high pressure 110 mm dia PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/ Kisan/ D-plast/ Prayag make).
Providing and fixing 110 mm dia PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/ Prayag make).
Abhishek Kashyap (BID ID -544773)
Tek Chand (BID ID -544849)
SRK INFRATECH (BID ID -544785)
HR CONTRACTOR (BID ID -544746)
Parminder Kumar (BID ID -544808)
ARNAV INFRAZONE PRIVATE LIMITED (BID ID -544578)
shashikant (BID ID -544890)
Lal Singh (BID ID -544840)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .