PAINTING OF WALL / BLDGS OF TECH AREA AT AF STATION BARRACKPORE UNDER GE (AF) BARRACKPORE

Amount

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviciable bricks and debris from site complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n.exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 75mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub bases, sub-floors, floors and pavings etc including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for precast RCC (1:2:4) type B1 (20 mm graded agregate) as in landings, cover slabs (for man holes etc.), chullha hoods, chajjas, water troughs, shelves and similar articles of any thickness and any size as required at site set jointed and pointed in cement mortar (1:4) including demolition of cement concrete (reinforced) of any description and in any position including reinforcement cut as required to facilitate demolition and removing debries from site of work complete all as specified and directed.

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 6.00 above but except brick and -ditto-.

Materials and labour for half brick thick brick work with sub class `B` bricks, old size, straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed.

Material and labour for mild steel TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed.

Materials and labour for complete removal of existing treatment on walls and applying two coats of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of surfaces complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Oenix and associates

APOLLO TRADERS

NARAYAN BUILDERS

SARKAR AND COM

KUMAR ENTERPRISE

BANERJEE CONSTRUCTION