Constuction of Auditorium at Rajiv Gandhi College Paprola Distt. Kangra HP

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

6x1.5 Sq. mm.

Supplying and drawing LAN cable CAT 5E, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including painting in case of surface cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

50 mm. dia

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

2 modules (78mmx78mmx50mm)

4 modules(140mmx78mmx50mm)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Supplying & fixing Modular blanking plate on the existing modular metal box as required:-

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron (50 mm x 50 mm x 6 mm thick) with sufficient numbers of horizontal and vertical intermediate members (25mm x 6mm thick) flat iron including painting and bonding to the existing earth as required:-

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units 7 nos. energy meter box, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-

300 mm deep (nominal)

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 450mm & cross-sectional area (25mmx6mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Supplying and fixing Aluminum alloy or wrought aluminium strip bus-bars, suitable for 300 Amp. 415 volts capacity 4 No. each of cross-sectional area (51mmx6mm), in the existing enclosure or cubical panel with all accessories including connections etc. as required:-

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

100 Amp. -16 KA

250 Amp. -35 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-6 way

Double door-16 way

Supplying and fixing of following way SEGREGATED, triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 8 module incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-8 way (8+12+24),7-segment

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Armoured cable 10 sq. mm (four core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 95 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 10 sq. mm (four core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 95 sq. mm (3.5 core)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, 300 mm sweep (Domestic)

Supplying and fixing of wall bracket EBONY decorative wall mounted, SS (stainless steel) finish fixture with texured glass diffuser suitable for 40 watt Mini GLS lamp without lamp ( ordering code LHJ04104499) of havells make or its equivalent complete in all respect or as approved by Engineer incharge.

Supplying and fixing of Mirror light VIVA compact & decorative energy efficient luminaire with antiglare diffuser and decorative end cap suitable 11 watt CFL (SU) without lamp (ordering code LHFOECF10Z1W011) of havells make or its equivalent complete in all respect or as approved by Engineer incharge.

Providing and fixing of optipro enclosure for frame-1 optimum 4 pole MCCB INDO-ASIAN Cat no-811985 HSN Code 8537 or equivalent make as required and approved by the Engineer-in- Charge.

Supplying and fixing of M.S.fan box (18 x 10 x 10) cm with phinolic laminated sheet cover in the front of M.S round 16 mm / 12 mm dia 60 cm long including connection complete in all respect as required or approved by the engineer incharge at site.

Supplying and fixing louvers / shutters for exhaust fan 300 mm as required and approved by the engineer incharge.

Providing, Installation, testing and commissioning of Suprim MK II Wall Fan, 450 mm - Wall of Bajaj Make or its equivalent including providing and fixing ,Earthing etc as required complete in all respect.

Providing and fixing of recess mounted LED Light Product code SPARKLE PRO ADJDLR30W857MOD40DWHTNEEM HAVELLS or its equivalent make as required and approved by the Engineer-in- Charge.

Providing and fixing of square shape Aesthetically designed 2X2 LED flat pannel surface/recess mounted as required which provides soft-light and glare free symmetrical illumination product code PLUTOSURFACE2X2PLS42WLED857S Havells or its equivalent make as required and approved by the Engineer-in- Charge.

Providing and fixing of recess mounted LED downlight with white powder coated polycarbonate decorative housing and pressure die-cast heat sink having high efficiency with heavy duty driver product code INTEGRANEOSURFACEDLS10WLED857S Havells or its equivalent make as required and approved by the Engineer-in- Charge.

Providing and fixing of surface and wall mounted LED batten exturded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver having THD less then 10% Product code DURABS40WLED865SPCSS Havells or its equivalent make as required and approved by the Engineer-in- Charge.

Supplying, fixing of Modular Connectors Suitable for CAT-6 RJ 45 Plugs including Connection complete in all respect as required or approved by the engineer incharge.

Supplying, fixing of CAT-6 RJ 45 Plugs including Crimping complete in all respect as required or approved by the engineer incharge.

Supplying and erection LuxMax Steel Decorative pole made out of mild steel (LuxMax-PT-114-301)) with LuxMax Arctura LED fixture (LuxMax-PT-155) 40 Watt LED. The bottom part of the pole ( 1000mmX114mmX4mm) shall be made out of B class mild steel tube in which a service window, the 6 amp SP MCB & connector provided in the service window duly fitted on a suitable size heavy duty bakelite plate. The top part of the pole ( 2000mmX60mmX3.2mm) shall also be made out of B class mild steel tube cast iron Embellishments shall be fitted & sealed by grubs screw fixing as required. The Pole is primer coated & painted with polyurethane paint with decorative ornamental single ended bracket made out of steel pipe with LuxMax Arctura LED fixture (LuxMax-PT-155) 40 Watt LED mounting at top of the pole complete in all respects Twinkle or its equivalent make including connections as required and approved by the engineer incharge.

Supplying, fixing of Double sided Signage with Built in Battery Back-up up to two years product code 220210/220211 Luminare type BESL 03 LED DSDWBB red/ green complete in all respect as Bajaj Or its equivelent make required or approved by the engineer incharge.

Supplying, fixing of single sided Signage with Built in Battery Back-up up to two years product code 220208/220209 Luminare type BESL 03 LED SSD/ WBB red/ green complete in all respect Bajaj Or its equivelent make as required or approved by the engineer incharge.

Supplying, fixing of Enviromental fridendly new genration energy saving decorative rectangular shaped wall recessed luminaire with SMD LED as light Source Footlight Product Code RADIANTNEOFT07WLED830SASYMBOPC Havells or its equivalent make complete in all respect as required or approved by the engineer incharge.

Providing and fixing Water CO2 6.5 Kg type fire extingushers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

Providing and fixing Water CO2 9 Liters fire extingushers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

Providing and fixing stored pressure vessel ABC 4 kg Powder type fire extingushers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

Supplying and fixing of street light Pannel/timer of Single phase Maxm 6KW load, Digital Timer 24 hours, contactor rating 32/TP,MCB rating 40 A SPN of HAVELLS or its equivalent Making connection, fixing with Nuts and Volts etc complete in all respect or approved by engineer in charge at site.

Erection of Galvanized Iron (G.I.) / Steel tubular or Steel rail pole of length 3 to 8 meter but not exceeding 8 meters up to a given depth below G/L. The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including excavation and refilling etc. complete in all respects as required:-

SHARMA ELECTRICAL CO.

Ratwan Light House

DHARMENDER SINGH