Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-AOC PREM NAGAR GALI NO 3 RAJPUTANA SALEMPUR ROORKEE DISTT HARIDWAR UK | ROORKEE | HARIDWAR | UTTARAKHAND | ₹8.2 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹9.6 L+₹1.4 L (16.8%)Rejected-AOC 795 AZAD NAGAR ROORKEE HARIDWAR PIN CODE 247667 | ROORKEE | HARIDWAR | UTTARAKHAND | 247667 | ₹9.6 L+₹1.4 L (16.8%) | L2 | Rejected-AOC Other than lowest bidder |
| 3 | L3₹11.1 L+₹2.9 L (34.8%)Rejected-AOC RADHA NIKUNJ L 2 SOUTH CIVIL LINES ROORKEE HARIDWAR UTTARAKHAND 247667 | ROORKEE | HARIDWAR | UTTARAKHAND | 247667 | ₹11.1 L+₹2.9 L (34.8%) | L3 | Rejected-AOC Other than lowest bidder |
| Sl No | Description | Qty | Unit | M/S Konark Electric Sales Corporation L1 | EX SOLDIERS MECHANICAL WORKS L3 | M/S KOHLI CONSTRUCTION L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply Installation testing and commissioning of retrofit emission control device for 30 kVA desiel generator of any make/vintage Make of RECD :- Device that approved by CPCB according to capacity
Category Application :- Reduce particulate matter (PM 2.5), Carbon Monoxide and Hydrocarbons emitted from Diesel Engine
Technology/Type :- ESP (Electrostatic Precipitator), Wet Scrubbing, Diesel Oxides Catalyst Guaranteed specified Particulate matter (PM 2.5) Carbon Monoxide, Hydrocarbon reduction efficiency (Min) Guaranteed specified Particulate matter (PM 2.5) Carbon Monoxide, Hydrocarbon reduction efficiency (Min) 70% for all DG sets | 1 | Each | 3,70,000 ₹3,70,000 | 3,00,000 ₹3,00,000 Lowest | 3,90,000 ₹3,90,000 |
| 1.01TEST REPORTS Certification :- Device should be ‘Type Approved’ as per the System and Procedure of Central Pollution Control Board for Emission Compliance Testing of Retro-fit Emission Control Devices (RECD) For Diesel Power Generating Set Engines, Dated 01/02/2022, wide Pollution Control Series PCLS/12/2021-22 Adhering to this, RECD to be ‘Type Tested’ for an equivalent kVA family as per the System and Procedure from any one of the four Central Pollution Control Board, Govt, of India, recognized/approved test agencies/laboratories as given below: (a) Automotive Research Association of India (ARAI, Pune) (b) International Centre for Automotive Testing (ICAT, Manesar) (c) Indian Institute of Petroleum (IIP, Dehradun) (d) Vehicle Research Development Establishment (VRDE, Ahmednagar): Back Pressure due to the Emission Control retrofit device :- Maximum back pressure exerted by the Emission Control retrofit device at max prescribed load by DG OEM(as per the capacity of the DG set) | ||||||
| 2.00 | Supply, installing, testing and commissioning factory made LT ( 415 Volts, 50 Hz , 3-phase, 4 wire supply ) CPRI approved, factory assembled LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated Aluminium bus bars of 600 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, ingress protection class ( IP-54 ) and made of 3.00 mm thick CRCA mild steel sheet and mild steel, Angle iron frame work made out of 40 X 40 X 5 mm ), front and rear opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR wire of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035 embedded in ground with and including masonry of PCC 1:2:4 type B1 of block size 30x30x30 cm in 1:4 CM complete all as specified and directed.
Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. | 1 | Each | 1,30,000 ₹1,30,000 Lowest | 3,00,000 ₹3,00,000 | 1,70,000 ₹1,70,000 |
| 2.01BUS BAR CHAMBER :- (a) 600 Amps 4 Strips Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INCOMING SUPPLY :- (i) MCCB 400 Amps 36 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No., Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL. INSTRUMENT FEEDER :- (a) Digital Volt Meter, 96X96mm, flush type rated 0-500 V, with Volt meter selector switch- 01 Set. (b) Digital Amp Meter, 96X96mm, flush type rated 0-400 A, with Amp meter Selector switch- 01 Set. (c) C.T's 400/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (d) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three). (e) Protection MCB 6 A SP C Series- 1 Set. (Set of three). Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. | ||||||
| 2.02OUTGOING SUPPLY :- (i) MCCB 325 Amps 36 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=02 Nos., Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL. Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. The panel manufacturer should have following Govt. Approved Certificates: 1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54 (IS/IEC : 61439 (Part-1), 2011 & IS/IEC : 61439 (Part-2) 2011) 2. Tempreature Rise (IS/IEC : 61439-1, 2011 & IS/IEC : 61439-2 2011) 3. CPRI Short Circuit IEC-61439-1 & 2 withstand strenght should be 70kArms for 1.0 Sec with intial peak of 154kApk 4. CPRI Certification IEC-61439-1 & 2 Rated current for short circuit not less than 6300 A with rated insulation voltage 660V 5. ISO 9001 CERTIFIED | ||||||
| 3.00 | Supply, installing, testing and commissioning factory made LT ( 415 Volts, 50 Hz , 3-phase, 4 wire supply ) CPRI approved, factory assembled LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated Aluminium bus bars of 400 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, ingress protection class ( IP-54 ) and made of 3.00 mm thick CRCA mild steel sheet and mild steel, Angle iron frame work made out of 40 X 40 X 5 mm ), front and rear opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR wire of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. embedded in ground with and including masonry of PCC 1:2:4 type B1 of block size 30x30x30 cm in 1:4 CM complete all as specified and directed.
Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. | 1 | Each | 1,30,000 ₹1,30,000 Lowest | 2,50,000 ₹2,50,000 | 1,50,000 ₹1,50,000 |
| 3.01BUS BAR CHAMBER :- (a) 400 Amps 4 Strips Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INCOMING SUPPLY :- (i) MCCB 250 Amps 25 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No., Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL. INSTRUMENT FEEDER :- (a) Digital Volt Meter, 96X96mm, flush type rated 0-500 V, with Volt meter selector switch- 01 Set. (b) Digital Amp Meter, 96X96mm, flush type rated 0-250 A, with Amp meter Selector switch- 01 Set. (c) C.T's 250/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (d) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three). (e) Protection MCB 6 A SP C Series- 1 Set. (Set of three). Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. | ||||||
| 3.02OUTGOING SUPPLY :- (i) MCCB 200 Amps 25 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No., (ii) MCCB 100 Amps 16 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No., (iii) MCCB 63 Amps 10 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=04 Nos., Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL. Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. The panel manufacturer should have following Govt. Approved Certificates: 1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54 (IS/IEC : 61439 (Part-1), 2011 & IS/IEC : 61439 (Part-2) 2011) 2. Tempreature Rise (IS/IEC : 61439-1, 2011 & IS/IEC : 61439-2 2011) 3. CPRI Short Circuit IEC-61439-1 & 2 withstand strenght should be 70kArms for 1.0 Sec with intial peak of 154kApk 4. CPRI Certification IEC-61439-1 & 2 Rated current for short circuit not less than 6300 A with rated insulation voltage 660V 5. ISO 9001 CERTIFIED | ||||||
| 4.00 | Supply, installing, testing and commissioning factory made LT ( 415 Volts, 50 Hz , 3-phase, 4 wire supply ) CPRI approved, factory assembled LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated Aluminium bus bars of 400 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, ingress protection class ( IP-54 ) and made of 3.15 mm thick CRCA mild steel sheet and mild steel, Angle iron frame work made out of 40 X 40 X 5 mm ), front and rear opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR wire of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. embedded in ground with and including masonry of PCC 1:2:4 type B1 of block size 30x30x30 cm in 1:4 CM complete all as specified and directed.
Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. | 1 | Each | 1,30,000 ₹1,30,000 Lowest | 2,00,000 ₹2,00,000 | 1,90,000 ₹1,90,000 |
| 4.01BUS BAR CHAMBER :- (a) 400 Amps 4 Strips Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INCOMING SUPPLY :- (i) MCCB 325 Amps 36 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No., Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL. INSTRUMENT FEEDER :- (a) Digital Volt Meter, 96X96mm, flush type rated 0-500 V, with Volt meter selector switch- 01 Set. (b) Digital Amp Meter, 96X96mm, flush type rated 0-400 A, with Amp meter Selector switch- 01 Set. (c) C.T's 400/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (d) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three). (e) Protection MCB 6 A SP C Series- 1 Set. (Set of three). Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. | ||||||
Tender Value
₹10.0 L
EMD Value
₹19,980
Closing Date
19 Aug 2026, 6:00 pmClosed
Sub Maj Pargunan A, Offg AGE (I) R and D Manali
AGE I R AND D MANALI PIN 175103 PH 01902255014
REPAIR/ MAINTENANCE OF RECD DEVICES FOR DG SETS AND OTHER CONNECTED ITEMS AT TRANSIT CAMP PALCHAN UNDER AGE (I) RnD MANALI.
2026_MES_780100_1
AGE(I)/MNL-26/2026-27
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Palchan
As per NIT and tender documents
5 documents required · 5 mandatory
₹500
AGE I R AND D MANALI
₹19,980
Yes
11 Sept 2026
22 Jul 2026
26 Aug 2026
22 Jul 2026
19 Aug 2026
5 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply Installation testing and commissioning of retrofit emission control device for 30 kVA desiel generator of any make/vintage Make of RECD :- Device that approved by CPCB according to capacity
Category Application :- Reduce particulate matter (PM 2.5), Carbon Monoxide and Hydrocarbons emitted from Diesel Engine
Technology/Type :- ESP (Electrostatic Precipitator), Wet Scrubbing, Diesel Oxides Catalyst Guaranteed specified Particulate matter (PM 2.5) Carbon Monoxide, Hydrocarbon reduction efficiency (Min) Guaranteed specified Particulate matter (PM 2.5) Carbon Monoxide, Hydrocarbon reduction efficiency (Min) 70% for all DG sets | 1 | Each | - | - |
| 1.01 | TEST REPORTS
Certification :-
Device should be ‘Type Approved’ as per the System and Procedure of Central Pollution Control Board for Emission Compliance Testing of Retro-fit Emission Control Devices (RECD) For Diesel Power Generating Set Engines, Dated 01/02/2022, wide Pollution Control Series PCLS/12/2021-22 Adhering to this, RECD to be ‘Type Tested’ for an equivalent kVA family as per the System and Procedure from any one of the four Central Pollution Control Board, Govt, of India, recognized/approved test agencies/laboratories as given below:
(a) Automotive Research Association of India (ARAI, Pune)
(b) International Centre for Automotive Testing (ICAT, Manesar)
(c) Indian Institute of Petroleum (IIP, Dehradun)
(d) Vehicle Research Development Establishment (VRDE, Ahmednagar):
Back Pressure due to the Emission Control retrofit device :- Maximum back pressure exerted by the Emission Control retrofit device at max prescribed load by DG OEM(as per the capacity of the DG set) | - | - | - | - |
| 2 | Supply, installing, testing and commissioning factory made LT ( 415 Volts, 50 Hz , 3-phase, 4 wire supply ) CPRI approved, factory assembled LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated Aluminium bus bars of 600 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, ingress protection class ( IP-54 ) and made of 3.00 mm thick CRCA mild steel sheet and mild steel, Angle iron frame work made out of 40 X 40 X 5 mm ), front and rear opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR wire of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035 embedded in ground with and including masonry of PCC 1:2:4 type B1 of block size 30x30x30 cm in 1:4 CM complete all as specified and directed.
Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. | 1 | Each | - | - |
| 2.01 | BUS BAR CHAMBER :-
(a) 600 Amps 4 Strips Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings.
INCOMING SUPPLY :-
(i) MCCB 400 Amps 36 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No.,
Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL.
INSTRUMENT FEEDER :-
(a) Digital Volt Meter, 96X96mm, flush type rated 0-500 V, with Volt meter selector switch- 01 Set.
(b) Digital Amp Meter, 96X96mm, flush type rated 0-400 A, with Amp meter Selector switch- 01 Set.
(c) C.T's 400/5 A CL 1.0 Tape Wound- 01 Set. (Set of three)
(d) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three).
(e) Protection MCB 6 A SP C Series- 1 Set. (Set of three).
Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. | - | - | - | - |
| 2.02 | OUTGOING SUPPLY :-
(i) MCCB 325 Amps 36 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=02 Nos.,
Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL.
Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite.
The panel manufacturer should have following Govt. Approved Certificates:
1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54 (IS/IEC : 61439 (Part-1), 2011 & IS/IEC : 61439 (Part-2) 2011)
2. Tempreature Rise (IS/IEC : 61439-1, 2011 & IS/IEC : 61439-2 2011)
3. CPRI Short Circuit IEC-61439-1 & 2 withstand strenght should be 70kArms for 1.0 Sec with intial peak of 154kApk
4. CPRI Certification IEC-61439-1 & 2 Rated current for short circuit not less than 6300 A with rated insulation voltage 660V
5. ISO 9001 CERTIFIED | - | - | - | - |
| 3 | Supply, installing, testing and commissioning factory made LT ( 415 Volts, 50 Hz , 3-phase, 4 wire supply ) CPRI approved, factory assembled LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated Aluminium bus bars of 400 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, ingress protection class ( IP-54 ) and made of 3.00 mm thick CRCA mild steel sheet and mild steel, Angle iron frame work made out of 40 X 40 X 5 mm ), front and rear opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR wire of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. embedded in ground with and including masonry of PCC 1:2:4 type B1 of block size 30x30x30 cm in 1:4 CM complete all as specified and directed.
Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. | 1 | Each | - | - |
| 3.01 | BUS BAR CHAMBER :-
(a) 400 Amps 4 Strips Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings.
INCOMING SUPPLY :-
(i) MCCB 250 Amps 25 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No.,
Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL.
INSTRUMENT FEEDER :-
(a) Digital Volt Meter, 96X96mm, flush type rated 0-500 V, with Volt meter selector switch- 01 Set.
(b) Digital Amp Meter, 96X96mm, flush type rated 0-250 A, with Amp meter Selector switch- 01 Set.
(c) C.T's 250/5 A CL 1.0 Tape Wound- 01 Set. (Set of three)
(d) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three).
(e) Protection MCB 6 A SP C Series- 1 Set. (Set of three).
Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. | - | - | - | - |
| 3.02 | OUTGOING SUPPLY :-
(i) MCCB 200 Amps 25 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No.,
(ii) MCCB 100 Amps 16 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No.,
(iii) MCCB 63 Amps 10 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=04 Nos.,
Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL.
Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite.
The panel manufacturer should have following Govt. Approved Certificates:
1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54 (IS/IEC : 61439 (Part-1), 2011 & IS/IEC : 61439 (Part-2) 2011)
2. Tempreature Rise (IS/IEC : 61439-1, 2011 & IS/IEC : 61439-2 2011)
3. CPRI Short Circuit IEC-61439-1 & 2 withstand strenght should be 70kArms for 1.0 Sec with intial peak of 154kApk
4. CPRI Certification IEC-61439-1 & 2 Rated current for short circuit not less than 6300 A with rated insulation voltage 660V
5. ISO 9001 CERTIFIED | - | - | - | - |
| 4 | Supply, installing, testing and commissioning factory made LT ( 415 Volts, 50 Hz , 3-phase, 4 wire supply ) CPRI approved, factory assembled LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated Aluminium bus bars of 400 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, ingress protection class ( IP-54 ) and made of 3.15 mm thick CRCA mild steel sheet and mild steel, Angle iron frame work made out of 40 X 40 X 5 mm ), front and rear opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR wire of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. embedded in ground with and including masonry of PCC 1:2:4 type B1 of block size 30x30x30 cm in 1:4 CM complete all as specified and directed.
Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. | 1 | Each | - | - |
| 4.01 | BUS BAR CHAMBER :-
(a) 400 Amps 4 Strips Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings.
INCOMING SUPPLY :-
(i) MCCB 325 Amps 36 KA 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No.,
Make of MCCB:- L&T/ Siemens / Legrand/ Havells/HPL.
INSTRUMENT FEEDER :-
(a) Digital Volt Meter, 96X96mm, flush type rated 0-500 V, with Volt meter selector switch- 01 Set.
(b) Digital Amp Meter, 96X96mm, flush type rated 0-400 A, with Amp meter Selector switch- 01 Set.
(c) C.T's 400/5 A CL 1.0 Tape Wound- 01 Set. (Set of three)
(d) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three).
(e) Protection MCB 6 A SP C Series- 1 Set. (Set of three).
Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. | - | - | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
TenderDocuments262627EM.pdf
Tender Documents • 0.95 MB
BOQ_873805.xls
BOQ • 5.87 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .