Development of Truism Infrastructure at places related to Mahabharata in Distt. Kurukshetra under Krishna Circuit, Distt. Kurukshetra (Pdg. Campus lighting work).

Amount

1 : - ( c ) Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 Amp. to 60 Amp. 415 V ,10 KA 3-phase. 31.12 c (i)

2 : - Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. 31.13(ii)

3 : - (L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 Amp.. to 32 Amp.. 31.17a) (ii)

: - TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17(a) (ii)

: - TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. 31.17(a) (iii)

4 : - (Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . 31.22(i)

: - Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)

: - Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. 31.22(iii)

: - Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)

: - Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . 31.22(xii)

: - Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)

: - Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . 31.22(xvi)

: - Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)

5 : - Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 10 Sq. mm 2 Core Cable . 31.26 (iv) Ard.

: - 25 Sq. mm 3.5 Core Cable . 31.26 (xxv) Ard.

: - 70 Sq. mm 3.5 Core Cable . 31.26 (xxviii) Ard.

: - 16 Sq. mm 4 Core Cable . 31.26 (xI) Ard.

6 : - Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . 31.28 (ii)

: - 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. 31.28 (iii)

: - 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . 31.28(iv)

7 : - Supply and erection of weather proof MS Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections . 31.30 (IV)

8 : - (v)Pedestal . Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 750 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 900 mm x 600 mm x 250 mm below ground level. 31.33 (i)

: - M.S.pedestal of size 1200 mm wide ,1500 mm high ,450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1350 mm x 600 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1500 mm x 750 mm x 250 mm below ground level . 31.33 (v)

9 : - (X)Miscellaneous . Supply and erection of caution notice plate in three languages. 31.35 (iii)

10 : - (ix)Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm . 31.35 (ix) (c)

: - 25 sqmm . 31.35 (ix) (e)

: - 35 sqmm . 31.35 (ix) (f)

: - 50 sqmm . 31.35 (ix) (g)

: - 70 sqmm . 31.35 (ix) (h)

11 : - Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). 31.40 (i)

: - Size 2.50 sqmm (3 / 1.05mm). 31.40 (ii)

: - Size 6 sqmm ( 7 / 1.05mm). 31.40 (iv)

12 : - Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 4-way, TP & N (Horizontal) (8+12) 31.41 (v)

13 : - Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. 25 mm dia 31.44(b)

14 : - Supply and erection of copper lugs including crimping etc.upto the entire satisfaction of Engineer-in-Charge of work. 1.5 sqmm to 2.5 sqmm 31.45 (a)

: - 4 sqmm to 6 sqmm 31.45 (b)

15 : - Supply and erection of MS sadles and clamps on wall / RCC parapit for fixing underground cable at at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect. 31.48

16 : - Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends inspection boxes , iron hooks, cement concrete etc. complete in all respect up to the entire satisfaction of engineer in charge of work. PVC pipe of 32 mm dia 31.58 ( i )

: - PVC pipe of 40 mm dia ( ii )

17 : - Supply, Installation, Testing and Commissioning of Wall/ free standing flooor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3 mm thicness seperate detacable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber Extended solid copper bars up to cable cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors withdetachable extension type structure. The panel will be complete with control wirring (copper) and fuse protection.(only outer area on all sides shall be measured) 31.63

18 : - Supply and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. 31.64

20 : - Supply and fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect. Rotary handle upto 125 A, MCCB 31.66 (i)

21 : - S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in charge of work. HDPE 63/50 mm outer dia / inner dia 31.67 ( i )

: - HDPE 90/75 mm outer dia / inner dia ( ii )

22 : - Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 63 amp 31.69 iv

: - 4 pole MCCB 100 amp v

23 : - HIGH MAST POLE Supply, installation, Testing and commissioning of 16 Mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 Nos. Luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge. Thickness of Top Section = 3mm (Minimum) Bottom Section =4mm (Minimum) Top Dia = 150mm Bottom Dia = 410mm Thickness of Galvanization = Top = 65micron (Min.) Bottom = 85micron (Min.) 31.83 (ii)

24 : - Supply and erection of Decorative Ornamental Pole 3600mm (Cast Iron) Metropolis of Makes Twinkle (LuxMax), Finish : Polyester / PU Painted Black with other accessories required to complete the job in all respect including foundation and erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work ( Similar makes of Jaguar / Keslec / Twinkle Lite) (only approved make) NS- 1

25 : - Supply and erection of Decorative Single Bracket of Makes Twinkle Luminiares (LuxMax Lighting) & Model No. LuxMax -BKT-3133-500 and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Similar makes of Jaguar / Keslec / Twinkle Lite) (only approved make). NS- 2

26 : - Supply and erection of Decorative Double Bracket of Makes Twinkle Luminiares (LuxMax Lighting) & Model No. LuxMax -BKT-3133- A 500 and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work ( Similar makes of Jaguar / Keslec / Twinkle Lite). NS- 3

27 : - Supply and erection of 60watt Harmony LED (Small/Large) of Makes Twinkle (LuxMax) & Model No. LUX-PT-169L, Hanging fixture made of cast aluminium housing with power LED's are mounted directly on heat singks and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Similar makes of Jaguar / Keslec / Twinkle Lite / Wipro). NS- 4

28 : - Supply and erection of 240watt TURBO LED (BARFEG 240W LED) (169819- White) of Makes Bajaj LED floodlight luminaire with secondary optics made in pressure die-cast housing and heat sink in aluminium extrusion with IP 66 and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Similar make of Philips, Surya, Crompton & Hevells). NS- 5

29 : - Supply and erection of 8 Watt Spot Light of Makes Wipro, Model No.LF05-600-055-27-XX (GardeniaLED) (LF-IP67 integral LED bushlight) (CCT K-2700) and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Similar make of Philips, Surya, Crompton / Bajaj). NS- 6

30 : - Supply and erection of 150watt Flood light LED (Warm White) of make Bajaj & Model No. BJFL 150W LED I WW (169980) and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work ( Similar makes of Havells, Surya, Philips & Wipro ). NS- 7

31 : - Supply, Carriage, Installation, Testing and Commissioning of Vaya Linear LP 2 feet. It is made up of extruded aluminum housing finish RAL7043. Its beam angle is 28X84 Deg of Philips make. Its voltage ranging is 100-240V. Wattage not exceeding 10W with lumen output of not less than 600. Luminaire has an IP protection of IP 66 and CCT is 4000K Lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade. It has IK 07 Luminaire should be UL/cUL/FCC/Class A/CE/PSE certified. The job includes cost of petty material required to fix the fitting as per the instruction of Engineer-in-charge. The work should be completed as per satisfaction of Engineer-in-charge (For roof area of the gate) (or similar make of Wipro / Crompton Greeves & Surya having similar specifications). NS- 8

32 : - Supply, Carriage, Installation, Testing and Commissioning of LED Vaya Uplight Inground. it is made up of Housing: die-cast aluminum Gasket: silicone rubber, heat-resistant of Philips make. It is High-quality high-power LEDs and integrated LED driver. Lifetime over 25,000 hours (70% lumen maintenance) @ Ta=25 ºC. Robust design-IP67 protection and IK10 impact resistance. Choice of beam angle – 12, 24 and 36º warm white (3000 K) having luminous flux 790 Lumens, Luminaire efficacy 55 Lm/W. Operting temprature is -20ºC < Ta < 40ºC for Facade of gate pillars. The job includes Carriage and Erection including cost of embedding the fitting after making pit in the existing floor, fixing the fitting in floor and sealing it properly complete to the satisfaction including SS frame as required at site. The work should be completed to the satisfaction of Engineer-in-charge (for the gate columns)(or similar make of Wipro / Crompton Greeves & Surya having similar specifications). NS- 9

33 : - Supply, Carriage and laying of Power Copper Cables, Solid Copper Conductor Upto 6 Sqmm And Balance Stranded Copper, XLPE Insulated, Cores Laid Up, PVC Innersheathed, armoured, Extruded PVC Type ST2 Sheathed, 650/1100 V Grade As Per IS 7098 (Part 1) 1988. The cable is to be laid in existing trench / pipe / duct fixed with suitable clamps as per site requirements including their cost. The work should be completed as per satisfaction of Engineer-in-charge (Grandlay / Havell's / RR / Polycab make only) 4Sqmm 4Core NS- 10 i

: - 6Sqmm 4Core ii

: - 10Sqmm 4Core iii

34 : - Supply and erection of PVC unsheathed copper Armoured 2.5 sqmm 3xore, 1100 Volts grade ISI marked in existing pipe complete with necessary connecton (Grandlay / Havell's / RR / Polycab make only) NS- 11

35 : - Supply, Carriage and erection of thermoplastic cable junction boxes IP 66/67 “weather proof”, for outdoor installation (with knockouts for cable entry) of various sizes for termination of cables. The box is to be embedded in the Cement Concrete Plateform / on wall / ceiling as per site requirement. The job includes cost of junction box with petty material required to fix the box excluding cost of cement concrete. The work should be completed as per satisfaction of Engineer-in-charge (Similar make of Hensel / Diplast/ Sintex ) Junction Box of size 104 x 104 x 70mm suitable for 1.5-4sqmm NS- 12 (i)

: - Junction Box of size 130x180x77mm suitable for 4-10 sq.mm (ii)

36 : - Supply & erection of enclosure for MCCB 32/63 Amp. (Indo asian make) Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. (similar make of L&T, Havells & Standard) NS- 13

37 : - Construction of RCC foundation for 12.5 / 16 / 20 mtr. high mast complete in all respect as per the appended design including the cost of digging sand filling 6" lean concrete 1:8:16 / bricks souling, Bar binding cement concret (M-20) shuttering, fixing of foundation bolts, refilling, carrying and erection of High Mast on foundation including petty material i.e. J -Bolts etc. to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. NS- 14

38 : - Supply and erection of 32 Amp. 3 Pole/230V Astronomical automatic time switch of Indo Asian make Cat No. TL032ASO alongwith contactor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. (Similar make of Havells, L&T & Indoasian) NS- 15

39 : - Supply and erection of 65 Amp. 3 Pole/230V Astronomical automatic time switch of Hevells / Indo Asian / LNT make Cat No. TL065ASO alongwith contactor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. (Similar make of Havells, L&T & Indoasian). NS- 16

M/s JSB Enterprises