Loading…
Loading…
Tender Value
₹33.8 L
EMD Value
₹33,850
Closing Date
6 Mar 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Chief Officer Deesa Nagarpalika
Construction of Different 4 Work (1) Construction and Renovation of Chief Officer and OS office, (2) Construction of Atal Vadi Common Plot of Shrikrishna Park, (3) Construction of Divider from Krishna Vila Part-2 to School and (4) Colour Work For Divider at Different Location for Deesa Nagar Palika. Dist. Banaskantha.
280936
61/2025-26
Open
Civil Works - Others
Banaskantha
13 documents required · 12 mandatory · 1 optional
₹1,770
Yes
Chief Officer Deesa Nagar Palika Deesa
₹33,850
Yes
27 Feb 2026
27 Feb 2026
27 Feb 2026
6 Mar 2026
27 Feb 2026
Name of Work : Construction of Different 4 Work (1) Construction & Renovation of Chief Officer and
OS office, (2) Construction of Atal Vadi Common Plot of Shrikrishna Park, (3) Construction of Divider
from Krishna Vila Part-2 to School & (4) Colour Work For Divider at Different Location for Deesa
Nagar Palika. Dist. Banaskantha.
Description Quantity Rate Per Amount
Demolition of Brick work and stone masonry including stacking of
serviceable materilas and disposal of unserviceable materials
with all lead and lift.(ii) In Cement Mortar.
Dismentaling tiled of stone floors laid in mortar including stacking
2 of serviceable materilas and disposal of unserviceable materials
with all lead and lift. 128.20 49.12 Sqm
Dismentaling of sheet roofing including ridges, Hips, Valleys,
Gutters etc. stacking of serviceable materilas and disposal of
unserviceable materials with all lead and lift.(ii) A.C. sheet
roofing. 100.00 54.63 Sqm
Dismentling expanded metal or I.R.C Fabric with necessary
4 battens and beadings including frame work, and stacking the
serviceable materials with all lead and lift. 8.75 57.13 Sqm
Brick work using common burnt clay building bricks having
crushing strength not less than 35 kg./Sq.Cm. in foundation and
5 plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)Upto two
floor level(B) Conventional 06001BA+06007A2A, Pg.86
Providing 15mm thick cement plaster in single coat on Rough
(Similar)side of single or half brick walls for interior plastering
upto floor two level and finished even and smooth in (i) Cement
mortar 1:3 (1-cement:3-sand) 346.72 183.73 Sqm
Applying two coats of putty & two coats of primer of approved
brand and manufacture on new wall surface to give an even
7 shade including thoroughly brushing the surface free from mortar
dropping and other foreign matter and sand papered smooth.
Wall painting (two coats) with plastic emulsion paint of approved
brand and manufacture on undecorated wall surface to give an
8 even shade including throughly brushingthe surface free from
mortar droppings and other foreign matter and sand papered
smooth. 451.06 83.18 Sqm
Providing and fixing standared extruded of alluminium section of
size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour
9 Powder Coated alluminium frame with 5 mm thick transparent
bronze colour tinted float glass as details etc 11037. Pg.119
Description Quantity Rate Per Amount
Providing and fixing eco-friendly light weight calcium silicate false
ceiling tiles having Tegular edge & 15 mm Thick Densified edges
on the Tile Periphery for Extra Strength The Light weight calcium
silicate ceiling tiles shall have , light reflection 85% non-
combustible as per B.S. 476 part IV, 100% humidity resistance
and also having thermal conductivity0.043° w/m KC.for the best
thermal Insulation . The Light weight calcium Silicate tile shall be
of approved texture Fine fissured/ Spintone/Cosmos having NRC
value of 0.5 & Globe having NRC value of 0.75 NRC or
equivalent of size 595 X 595 mm to be laid on true horizontal
level suspended inter locking metal grid of hot dipped galvanized
steel sections (galvanizing @120 grams per sqm including both
side) consisting of main ‘T’ runner suitably spaced at joints to get
required length and size of 24X38mm made from 0.30 mm thick
(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size
24X28mm made out of 0.33mm (Minimum) sheet spaced
1200mm along spaced between main ‘T’ at 600mm centre to
centre to form agrid of 1200X600mm and secondary cross ’T’ of
length 600mm and size 24x28mm made of 0.30 mm thick
(Minimum) sheet to be interlocked at middle of the 1200X600mm
panel to form grid of size 600X600mm resting on periphery
walls/partitions on a perimeter wall angle pre-coated steel of size
(24X24X3000mm made of 0.40mm thick (minimum) sheet with
the help of rawl plugs at 450mm centre to centre with 25mm long
dry wall screws @ 230mm interval and laying 15mm thick
Densified edges light weight calcium silicate ceiling tiles of
approved texture (Fine Fissured/Cosmos/Spintone) in the grid
including, cutting /making opening for services like diffusers,
grills, light fittings, fixtures, smoke detectors etc., wherever
required, Main ‘T’ runners to be suspended from ceiling using G.I.
slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm
dia and 50mm long dash fasteners, 4mm G.I. adjustable rods 105.67 1674.15 Sqm
Providing and fixing L-Shape Executive Tables, with table top
made of 25 mm thick particle board, finished with approved
quality decorative laminate on top surface only, including PVC
edge banding on all exposed edges, complete. The table top shall
be supported on engineered wood gable-type understructure
made of particle board, laminated on both sides, finished in
approved colour, complete with non-detachable modesty panel
made of particle board, laminated on both sides, fixed rigidly to
the understructure, complete. Providing and fixing right-aligned
extended return unit (ERU) made of particle board, laminated on
both top and bottom surfaces, with gable end, comprising storage
unit with two shelves, one closed compartment and three
drawers, complete with all necessary hardware, fittings and
accessories. The overall height of the worktop shall be 750 mm
(±20 mm). The work shall include all materials, labour,
fabrication, transportation, fixing, levelling and finishing, complete
as per approved drawings, specifications and directions of the
Engineer-in-Charge. Warranty: Minimum 12 months.(Main Desk
2'6" x 10' and Extended unit 1'6" x 4')
Description Quantity Rate Per Amount
Providing and fixing L-Shape Executive Tables, with table top
made of 25 mm thick particle board, finished with approved
quality decorative laminate on top surface only, including PVC
edge banding on all exposed edges, complete. The table top shall
be supported on engineered wood gable-type understructure
made of particle board, laminated on both sides, finished in
approved colour, complete with non-detachable modesty panel
made of particle board, laminated on both sides, fixed rigidly to
the understructure, complete. Providing and fixing right-aligned
extended return unit (ERU) made of particle board, laminated on
both top and bottom surfaces, with gable end, comprising storage
unit with two shelves, one closed compartment and three
drawers, complete with all necessary hardware, fittings and
accessories. The overall height of the worktop shall be 750 mm
(±20 mm). The work shall include all materials, labour,
fabrication, transportation, fixing, levelling and finishing, complete
as per approved drawings, specifications and directions of the
Engineer-in-Charge. Warranty: Minimum 12 months.(Main Desk
2' x 6' and Extended unit 1'3" x 3'3" ft.)
Providing, supplying, and placing Wooden Center Table,
rectangular in shape, made from engineered wood frame with
table top of engineered wood / glass / rose wood, finished in
13 Sheesham colour. The table shall be of approved design and
dimensions, with proper joinery, smooth edges, and superior
surface finish. The construction shall be sturdy and capable of
bearing a minimum load of 45.36 kg. 1.00 7000.00 Nos.
Providing, supplying, and installing table desk made of particle
board with laminate finish on both sides, having rectangular table
top and engineered wood gable-type understructure. The desk
shall include a solid laminated modesty panel, finished in brown
colour, complete with all fittings, accessories, and installation,
with 12 months standard warranty, as approved by the Engineer-
OS Office Desk table (2'3" x 6' Ft) 1.00 9000.00 Nos.
Providing, supplying, and installing wooden conference table of
approved design and finish, made from engineered wood/particle
board with high-quality laminate finish on both sides. The table
shall have a sturdy engineered wood understructure, smooth
edges with proper edge banding, and durable surface suitable for
15 conference and meeting use. The item shall include all materials,
fittings, accessories, transportation, and installation at site,
complete in all respects, as per specifications and to the
satisfaction of the Engineer-in-Charge.
Conference Table (10' x 5' Ft.)
Providing, supplying, and placing revolving executive chair with
pneumatic height adjustment, centre tilt with locking, and caster
wheels, having leatherette upholstered cushioned seat and high-
back backrest with lumbar support, fixed padded armrests,
complete with all accessories and minimum 3-year warranty, as
approved by the Engineer-in-Charge. 3.00 14000.00 Nos
Providing, supplying, and placing revolving office chair with
hydraulic height adjustment, centre tilt mechanism, and caster
wheels, having mesh-upholstered cushioned seat and low-back
backrest, with fixed armrests, complete with all fittings and
accessories, and minimum 1-year warranty, as approved by the
Engineer-in-Charge. 10.00 8000.00 Nos.
Description Quantity Rate Per Amount
Providing, supplying, and installing 6-seater sectional fabric sofa
of approved design and finish, made with solid wood primary
frame, high-density foam cushioning, and fabric upholstery in
grey colour. The sofa shall be sturdy, comfortable, and suitable
for residential and commercial use, with adequate seating
18 capacity and load-bearing strength.The item shall include all
components, fittings, accessories, DIY assembly, transportation,
and placement at site, complete in all respects, with a minimum 3-
year limited domestic warranty, as per specifications and to the
satisfaction of the Engineer-in-Charge.
Providing, supplying, and installing 43-inch QLED 4K Ultra HD
Smart LED Television with 50 Hz refresh rate, AI processor, HDR
support, and smart TV features. The TV shall include HDMI, USB,
Wi-Fi, Bluetooth, Ethernet connectivity, minimum 20 W sound
output, and be supplied with remote, stand, power cord, and
accessories, complete with manufacturer’s warranty, as approved
by the Engineer-in-Charge.Brand:- Sony or Samsung
Providing, supplying, and installing 55-inch QLED 4K Ultra HD
Smart LED Television with 50 Hz refresh rate, AI processor, HDR
support, and advanced smart TV features. The unit shall include
HDMI, USB, Wi-Fi, Bluetooth, and Ethernet connectivity,
minimum 20 W audio output, and be supplied with remote, stand,
power cord, and accessories, complete with manufacturer’s
warranty, as approved by the Engineer-in-Charge. Brand:- Sony
or Samsung 1.00 75000.00 Nos
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in
looring treads of steps and landing laid on a bed of 12mm thick
cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush
pointing in white cement. 100.00 1109.27 Sqmt
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in
skerting risers of steps and dedo on 10mm thick cement plaster
1:3 (1-cement : 3-coarse sand) and jointed with white cement
slurry 34.47 1183.19 Sqmt
Description Quantity Rate Per Amount
Supply & Fixing of Roller Blinds of approved by architect / EIC
having the DRIVE UNIT shall be of moulded plastic with steel
spring support and inserted into the tube end. It shall be driven by
a ball chain pulley with ball chain and can be positioned at right
side or left hand side of the Shade. The Shade when lowering or
raising, shall be automatically locked in position upon release of
the ball chain by means of a built in friction lock. The END PLUG
shall be moulded of plastic with a steel location pin. The plug
shall be inserted into the tube end. (Opposite to the Drive
Unit).The SUPPORT BRACKETS shall be of coated steel &
provided with covers and used in right hand or left hand positions
differentiated by the acceptance of the of the rectangular drive
unit support or the round idler plug pin.The ROLLER TUBE shall
be of extruded aluminum with 38mm internal diameter & skin
thickness of 1mm and shall incorporate a keyway integral with the
tube to accommodate the spline. The outside diameter of the
roller tube shall be 40mm.The BOTTOM RAIL shall be a stiffening
element inserted into a bottom rod pocket. The material may be
timber, PVC covered steel tube or VB Bottomrail.The
BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter
acetal balls moulded co-axially to it on 6mm pitch to form an
endless ballchain. It is used for raising or lowering action of the
shades. The FABRIC will be 100% PVC free with no Volatile
Organic Compounds recommended , having no bacterial / fungal
emission and satisfying NFPA fire safety standard , shall be as
per selection from the Hunter Douglas range and shall be sized
according to site requirement (subject to maximum width
limitation of individual fabric types). A bottom pocket shall be
created in the fabric to incorporate the bottom rail.
Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm
& earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv
grade FRLS PVC insulated multi strand copper wires upto max
length of 10 mt, in below type of pipe erected with 6A Tissino
Type ISI marked flush type switch / bell push and accessories
24 erected on Metal / PVC/Wooden Box covered with 3 mm thick
PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary
Lamp holder/ceiling rose / H.D.Connector as directed. (a) with
medium class Rigid PVC pipe and accessories erected flushed
on wall/ceiling complete
Supplying and erecting LED indoor fittings with LEDs of wattage
0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing
used as a heat sink shall be made of thick sheet Steel conforming
to IS: 513/CRCA/aluminium pressure die cast powder coated
and high U.V. & corrosion resistance with diffuser housed in
aluminium casted body with company mark/name 160V to
270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to
25 6500K, Luminaire efficacy> 85 lumens/watt , LED driver
efficiency > 85 % ( fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges shown.) (A)
Square/ Circular shaped Surface/Recessed Mount Downlight with
provision for spring loaded mounting clips complete.IP20 (iii) 16-
20 watts, Cat-III 43.00 584.00 Nos
Description Quantity Rate Per Amount
Providing & erecting Approved make Ceiling Fan with double ball
bearing ISI mark with Condenser 230 volt A.C.50 Hz. 1200 mm
sweep complete having 4 blades Aluminium body and blade sets
having ornamental design shanks, canopy erected with earthing [
Make shall be approved by Engineer in Charge]
Providing and fixing wsh down water closet (European type, W.C.
Pan) with integral P or S trap including jointing the trap with soil
27 pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and
cover to be measured and paid for separately)(A) vitreous China
Pattern :(i) in white colour 1.00 1343.38 Nos
Providing and fixing 12.5 Litres low level flushing cistern with a
pair, of C.I. or Mild brackets, complete with fittings such as lead
valve less syphon, 15mm nom.nal size brass ball valve with
polythene float, C.P brass handle unions and couplings for
28 connections, with inlet, outlet and overflow pipes, 40mm dia.
porcelain enamelled flush bend ncluding cutting holes in walls
and making good the same connecting the flush bend with cistern
and closet (overflow pipe to be measured and paid for
separately)(A) itreous China (I) In white colour 1.00 2346.92 Nos
Providing and fixing cast iron (Spun) Nahni trap of the following
nominal diameter of self cleaning design with C.I. screaed down
29 or higned grating including cost of cutting and making good the
walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia.
Providing and fixing washbasin with single hole for pillar tap with
C.I. or M.S. brackets painted white including sutting holes and
30 making good the same but excluding fittings.(A) Vitreous
China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In
white colour. 1.00 1511.53 Nos
Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2
working pressure poluthene pipes of the following outside Dia.
31 Low densidy, complete with special falnge ompression type
fittings, wall clipsetc. including making good the wall ceiling and
floor.(B) 25mm 25.00 106.34 Rmt
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2
working pressure polythene pipes of the following outside Dia.
32 Low densidy, complete with special falnge compression type
fittings, wall clipsetc. including making good the wall ceiling and
floor.(F) 75mm 10.00 277.46 Rmt
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2
working pressure poluthene pipes of the following outside Dia.
33 Low densidy, complete with special falnge compression type
fittings, wall clipsetc. including making good the wall ceiling and
floor.(G)110 mm 10.00 335.69 Rmt
Providing and fixing 600mm x 450mm bevelled edge mirrror of
superior glass mounted on 6mm thick A.C. sheet or plywood
sheet and fixing to wooden pluge with C.P. brass screws and
washers. 1.00 850.90 Nos.
Providing and fixing toilet paper holder.(A) C.P. Brass
Providing and fixing screw down bib taps of following size.(A)
Brass screw down bib tap polished bright. (ii) 20mm dia. 2.00 212.68 Nos.
Providing and fixing pillar tap, capstan head, screw down high
pressure with screws, shanks and back nuts. (ii) 20mm dia. 1.00 351.18 Nos.
Providing and fixing chromium plated brass half trun flush cock of
38 approved quality including fixing in pipe line etc. complete.(ii)
25mm dia. 3.00 261.16 Nos.
Providing and fixing C.P. brass shower rose with 15mm or 20mm
inlet.(A) 100mm dia. Each 1.00 279.37 Nos.
Description Quantity Rate Per Amount
Providing and laying Granite stone slab flooring over 18mm
(average)base of cement mortar 1:6 (1-cement : 6 coarse sand)
40 or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed
with gray cement slurry including rubbing and polishing complete.
41 Labour Charges half round edge for Granite 55.00 85.85 Rmt
Excavation for foundation for depth from 1.5 m to 3.0 m including
sorting out and stacking of useful materials and disposing off the
excavated stuff upto 50 Meter lead. (A) Loose or soft soil
Providing and laying cement concrete 1:3:6 (1- Cement : 3-
Coarse sand : 6- crushed stone aggregates 40 mm nominal size)
and curing complete including cost of formwork in (A) Foundation
and Plinth (R.A) 21.07 3098.81 Cmt.
Providing, laying controlled cement concrete M 250 and curing
complete including the cost of form work but excluding
44 reinforcement for reinforced concrete work in: Up to Plinth Level.
Filling available excavated earth (excluding rock) in
trenches. plinth, sides of foundations etc. in layers not
exceeding 20 cm. in depth consolidating each disposited
layer by ramming and watering. 9.22 136.92 Cmt.
Filling in foundation and plinth with murrum or selected soil in
46 layers of 20cm. thickness including watering, ramming and
consolidating etc. complete 29.14 282.07 Cmt.
Filling in plinth with sand under floors including watering
ramming, consolidating and dressing complete. 21.86 444.75 Cmt.
Providing, laying controlled cement concrete M 250 and curing
complete including the cost of form work but excluding
reinforcement for reinforced concrete work in: Up to Plinth
Level.(B) Plinth beam 6.47 6301.39 Cmt.
Providing, laying controlled cement concrete M 200 and curing
complete including the cost of form work but excluding
reinforcement for reinforced concrete work in: Above Plinth Level.
(A) Column (i) Ground Floor 3.60 8828.41 Cmt.
Providing and laying controlled cement concrete M-200 and
curing complete including the cost of form work but excluding
reinforcement for reinforced concrete work in:
Lintel 2.78 6264.02 Cmt.
Providing TMT Bar FE 500/500D reinforcement for R.C.C. work
51 including bending, binding and placing in position complete upto
floor two all level 2065.40 72.43 Kg.
P & L brickwork using common burnt clay building bricks having
crushing strength not less than 35 kg/sq.cm in super structure
above plinth level & all floor height in cement mortar 1:6 (B)
Conventional Ground Floor 17.02 3039.81 Cmt.
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm
(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)
on new surface or fixing on existing flooring by adhesive material
including dismentaling of existing flooring and jointed with color
cement slurry including finised with flush pointing & cleaning the
surface etc. complete for antiskit (upto 10 ton) 145.72 1467.72 Sqmt
Providing and laying polished Kota stone slab flooring over 20mm
(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse
54 sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry
including rubbing and polishing etc. complete. (B) 30 mm thick
(upto 10 ton) 17.85 677.66 Sqmt
Description Quantity Rate Per Amount
Structural steel work ( Confirming to IS 49231997) riveted, bolted
or welded in builtup for all type sections, in framed work, including
cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete as per the structural designs
and directions of Engineer in charge.Column ( 122 x 61 x 3.6mm
Painting two coats (Including priming coat) on new steel and
other metal surface with enamel paint, brushing, interior to give
an even shade including cleaning the surface an even shade
including cleanicn the surface of all dirt, dust and other foreign
Providing, Fixing, Installation of Self Supported Galvalume
Roofing of Proflex from M&B Engineering Ltd or Equivalent with
proper overlapping and seaming b/w different sheets without
making holes or preventing the overturning the roof by wind
addition made up from superior quality, structural grade steel.
Base metal width 912 mm, Steel Grade : Grade D and Thickness
0.80 mm BMT, 0.85 mm APT with tolerance of +/- 0.04 mm,
Regular Modified Polyster Imported Color Coated Galvalume
Steel having Profiled width of 625 mm +/-10mm.Design, supply, &
fabrication of self supported single span arch roof fabricated from
mechanically seamed manufactured by American Hydraulic
Machines to profiles of Imported Galvalume Cold Rolled
Structural Steel coils as per standard ASTM A792, Steel Sheet,
Aluminum-Zinc Alloy Coated by Hot-Dip Process. The work
should be carried out by specilialize and approved agency only.
The rate of item is including fitting as per standerd specification.
(A) Thickness 0.80 mm BMT, 0.85 mm APT with tolerance of +/-
0.02 mm, Coil Width 912 mm tolerance of +/- 0.04 mm, for
Mtr Spanand length 30 mtr.( MR)
Providing & laying 15 mm. thick mala cement plaster in single
coat on fair side of brick concrete walls for interior plastering and
58 finished even & smooth plaster.(ii) Cement mortar 1:4 (1 cement :
4 sand) Extra over item for finishing with a floating coat of neat
cement slurry. (ii) Ground Floor 74.00 215.65 Sqm
Providing 20mm thick cement plaster in single coat on single or
half brick walls for interior plastering upto floor two level and
finished even and smooth in (i) Cement mortar 1:3 (1- cement:3-
sand) 129.16 235.51 Sqm
Applying two coats of Birla or Asian acrylic lapy ( putty) & two
coats of primer of approved brand and manufacture on new wall
60 surface to give an even shade including thoroughly brushing the
surface free from mortar dropping and other foreign matter and
sand papered smooth. 74.00 40.59 Sqm
Distempering (Two Coat ) With OIL bound distemper of
approved brand of manufactured and required shade on wall &
Ceiling surface to give and even shade over and including a
primer coat with a distemper primer of approved brand . 74.00 75.50 Sqm
Finishing wall with weather proof exterior emulsion paint on wall
surface (two coats) to give an required shape even shade after
thoroughly brushing the surface to remove all dirt, and remains of
loose powdered materials.etc complete 3099.16 73.83 Sqm
Providing corrugated G.I. sheet of class-3 roofing fixed with
glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with
63 bitumen and G.I. limpet washer or G.I. limpet washer. filled with
white lead complete excluding the cost of purlins, Rafters and
Trusses.(1) 0.80 mm thick sheet. 58.28 734.19 Sqm
Description Quantity Rate Per Amount
Pre cast concrete kerbstone Providing and fixing 2.5Mpa Grade
of concrete precast exposed pimple texture finish kerb stones of
steel mould Vaccum wet pressed machine approved make as per
approved sample of any size and any type. Kerbs shall be fixed
on the 100mm thk M15 PCC foundation prepared as per
approved design. The rate shall also include for erecting and
fixing the pieces in position, cutting if required, for complete kerb
system with Half Batter /Bullnose/ square Profile type of kerbs
including necessary accessories of kerb like radius kerb, angles
and quadrant kerbs, droplet kerbs etc. complete as per drawing.
Kerb shall be fixed as paper joint without any jointing material.
However cement mortar shall be provided at the backside of kerb
stone joint. (Sample must be approved) Cost of excavation, base
PCC, side filling shall be paid including item as directed engineer -
incharge. (b) HB/BN/SQ 600x450x150mm. (M.R)
Supplying and stacking of good earth at site including royalty and
carriage upto 5 km lead complete (earth measured in stacks will
be reduced by20% for payment).Horiculture s.o.r pg.no.-225,2.2
Flexible Median Marker : Providing and Fixing of Flexible Median
Marker that are made of tough, high impact resistant, injection-
molded, thermoplastic body with property of flexibility to provide
high durability. The dimension of Flexible Median Marker should
not exceed 18.4 cm in height(including shank height),12.5 Cm in
width. ,0.65 cm in thickness and shank depth shall be 3.4 cm The
body structure shall be rounded at all its corners and edges. The
plastic used for molding the Flexible Median Marker should
survive impact load of 5kg continuously for 750 times at room
temperature. The logo of the manufacturer shall be embossed on
either side of the body in the injection molding process. The
Median Marker shall have flame like shaped body with,
fluorescent yellow color retro-reflective sheeting of size not less
than 90 Cm square, with fully reflective micro prismatic cube
corners as its retro-reflective elements as per IRC 67 2012 and
ASTM D4956-09 type XI specifications reflectivity values. The
retroreflective sheeting shall be one or both sides of the Flexible
Median Marker and shall be edge protected with no exposed
edges which will prevent edge lifting, vandalism, sheeting
damage, etc. The Flexible Median Marker shall be fixed by a
combination of epoxy adhesive and grouting as recommended by
manufacturer and Engineer in charge.(SOR 2024-25,Chap-
26,Item no,26093A, 20.1 Page No 221)
Informatory Signs :-Providing and fixing sing boards made out of
2mm aluminium sheet; size 80 x 60cms. rectangle as per the
design of IRC-67-1977 pre treated with phospheting process &
acid teching; coated with one coat of epoxyprimer and two coats
of best qualityepoxy paint; reflectorised with retro refiective
sheeting as per latest M.O.S.T. Specifications; 3.1m long stand
postand frame fabricated from suitable sizeiron angle of 35 x 35 x
3mm75x75x6mm as required; painted with best qualityepoxy
coatings in black and whitebends. the details of symbol for
eachboard shall details of symbol for eachboard shall be as per
the instruction ofengineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x45 x 60cms. for each leg. including
excavation curing tec. complete under the supervision of
engineer in charge.(A) Engineer Grade(VR)...(SOR 2024-
25,Chap-26,Item no,26164, 20.1 Page No 189)
Description Quantity Rate Per Amount
Cautionary Warning Sign :-Providing and fixing sign boards made
out of 2mm aluminium sheet / 4mm ACP (Aluminum composite
Panel); size 90 x 90 x 90 cms. equilateral triangle as per design
of IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint ;reflectorised with Micro Prismatic Grade
retro refiectivesheeting of Type-11 as per ASTM D-4956 and
latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with
bestquality epoxy coatings in black and white bends. The details
of symbol foreach board shall be as per theinstruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x
45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from
original manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11
Retro Reflective sheeting.(SOR 2024-25,Chap-26,Item
no,26092C, 20.1 Page No 189)
Total Amount Rs.
Total Amount Rs.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Schedule B.pdf
Tender Document.pdf
SBD.pdf
Download all tender documents and submit your bid