BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

Total Amount Rs:-

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Demolition and disposal of unserviceable materials with all lead and lift.(i)

Cement concrete.

Demolition including stacking of serviceable materilas anddisposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable

3.00 materilas and disposal of unserviceable materials with all lead and lift.(ii) In 680.94 Cu.M. 536.09

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

4.00 thickness including watering, ramming and consolidating etc. complete. 648.00 Cu.M. 432.65

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF ENTRY GATE AND SIDE ENTRY AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Excavation for foundation upto 1.5M depth including dewatering & sorting out

1.00 and stacking of useful materials and disposing of the excavated stuff upto 50 123.78 Cu.M. 117.08

Meter Lead. Loose or Soft Soil.

Excavation for foundation 1.5M to 3.0M depth including dewatering & sorting

2.00 out and stacking of useful materials and disposing of the excavated stuff upto 62.72 Cu.M. 129.81

50 Meter Lead.Loose or Soft Soil.

Filling available excavated earth (exluding rock)in trenches plinth,sides of

3.00 foundation etc.in layer not exceeding 20cm in depth consolidating each 186.50 Cu.M. 130.40

disposited layer by ramming and watering.

Providing and laying cement concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6-

4.00 hand broken stone aggregates 40mm nominal size) and curing complete 12.29 Cu.M. 3005.76

excluding cost of formwork in (A) Foundation & Plinth

Providing and laying controlled cement concrete M250 and curing complete

5.00 including the cost of formwork but excluding reinforcement for reinforced 25.02 Cu.M. 4466.21

concrete work in

Providing andfooting,

laying Base of Columns

controlled cementandconcrete

M250 and curing complete

6.00 including the cost of formwork but excluding reinforcement for reinforced 27.28 Cu.M. 7400.58

concrete work in Column, upto two floor level.

Providing and laying controlled cement concrete M250 and curing complete

7.00 including the cost of formwork but excluding reinforcement for reinforced 12.60 Cu.M. 6656.73

concrete work in Beams upto two floor level.

Providing and laying controlled cement concrete M250 and curing complete

including the cost of formwork but excluding reinforcement for reinforced

concrete work in Shelves, Lintel, slab, landing upto two floor level.

Brickwork using common burnt clay building bricks having crushing strength

9.00 not less than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1- 13.67 Cu.M. 4021.03

Cement :6- Fine Sand ) (B) Conventional

Brickwork using common burnt clay building bricks having crushing strength

not less than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1-

Cement :6- Fine Sand ) (B) Conventional. Extra for brickwork in super structure

above floor two level

Providing & Fixing S.S. Railing to flooring & wall including loading, unloading,

taxes, labour etc complete as per Engineer In Charge.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

12.00 binding and placing in position complete upto floor two level 11148.12 Kg 76.22

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 20mm thick sand faced cement plaster on walls upto height 10mt.

Above ground level consisting of 12mm thick backing coat of C.M. 1:3 ( 1-

cement : 3-sand ) and 8mm thick finishing cost of C.M.1 :1 ( 1-Cement : 1-

Sand) etc. complete.

Providing texture plaster on Rough plaster for exterior plastering upto floor

two level as per Instruction of Engineer in-charge

providing and laying Granite slab flooring or dedo over 20 mm base of cement

16.00 mortar 1:6 (1 cement :6 coarse sand ) or L.M. 1:1.5 laid & jointed with gray 62.40 Sq.M. 2814.16

cement slurry including rubbing and polishing complete.

Labour Charges For Half Round edge for Granite

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF ENTRY GATE AND SIDE ENTRY AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing M.S. grills of required pattern to wooden frame of

windows with M. S. flat at required spacing & frame alround, square or round

bars with round bars with round headed bolts and nuts or by screws.(Plain

Painting two coats ( including priming coat ) on new steel and other metal

19.00 surface with snthetic enamel paint ,brushing to give an even shade including 56.00 Sq.M. 100.48

cleaning surface of all dirt, dust and other foreign matter.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

Wall Painting (Two coats) with plastic emulsion paint of approved brand &

manufacture on under coated wall surface to give an even shade including

21.00 throughly brushing the surface free from mortar dropping and other foreign 123.00 Sq.M. 78.91

matter and sand papered smooth.

Finishing Wall with Weather Proof Exterior Emulsion Paint on wall Surface

(Two Coats) to give an required shape even shade after throughly brushing

22.00 the surface free from mortar dropping and other foreign matter and sand 123.00 Sq.M. 88.77

papered smooth. Extra over Item 51 for every subsequent coat of water

proofing cement paint of approved brand and manufacture.

Providing, fabricating, supplying, and fixing outdoor CNC cut stainless steel

name board made of approved quality stainless steel sheet of grade SS 304 /

SS 316, of specified thickness, cut by CNC laser for accurate lettering and

design as per approved drawing, layout, size, and font. The surface finish shall

be mirror polished / satin / hairline / matte as approved. All edges shall be

smooth and free from burrs. The name board shall be weatherproof and

suitable for outdoor installation, complete with stainless steel stand-off

spacers / concealed fixing arrangement, necessary anchors, bolts, and

accessories. The item includes transportation, handling, erection, alignment,

fixing at all heights, cleaning, and making good the surface, complete in all

respects as per directions of the Engineer-in-Charge.

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF SWD LINE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Excavation for foundation upto 1.5M depth including sorting out and stacking

of useful materials and disposing of the excavated stuff upto 50 Meter Lead.

Loose or Soft Soil.

Excavation for foundation upto 1.5 mt. to 3.0 mt. including sorting out stacking

2.00 of useful material & disposing of excavated stuff upto 50.Mtr lead(B) Dense or 222.11 Cu.M. 162.38

Constructing Manhole with RCC top slab in 1:2:4 mix (1-Cement, 2-Coarse

Sand, 4-graded stone aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-Cement, 3-Coarse Sand, 6-Bick bats 40+50 mm size) inside plaster

15 mm. thick with cement mortar 1:5 (1-cement , 5-coarse Sand) finished with

a floating coat of neat cement and making channels in cement concrete 1:2:4

mix (1-Cement, 2-Coarse Sand, 4-graded stone aggregate 20mm nominal size)

3.00 finished smooth comlete including curing and festing (i) Inside size 900 mm x 12.00 Nos 12205.96

1200 mm and 1.5 m. deep including precast RCC M.200 Frame & cover (For

SWD jali) suitable to drainage M.H. (A) with 230 mm thick walls of brick

masonary using brick having crushing strength not less than 35 kg/sq.cm. in

cement mortar 1:5 (1-cement , 5-coarse Sand)

(1) A type depth 0.90 Metre for 150mm diameter sewer.

Constructing Manhole with RCC top slab in 1:2:4 mix (1-Cement, 2-Coarse

Sand, 4-graded stone aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-Cement, 3-Coarse Sand, 6-Bick bats 40+50 mm size) inside plaster

15 mm. thick with cement mortar 1:5 (1-cement , 5-coarse Sand) finished with

a floating coat of neat cement and making channels in cement concrete 1:2:4

mix (1-Cement, 2-Coarse Sand, 4-graded stone aggregate 20mm nominal size)

4.00 finished smooth comlete including curing and festing (i) Inside size 900 mm x 12.00 Nos 20506.45

1200 mm and 1.5 m. deep including precast RCC M.200 Frame & cover (For

SWD jali) suitable to drainage M.H. (A) with 230 mm thick walls of brick

masonary using brick having crushing strength not less than 35 kg/sq.cm. in

cement mortar 1:5 (1-cement , 5-coarse Sand)

(2) B type depth 1.50 Metre for 150mm diameter sewer.

Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR

5.00 Part thereof over item No.24.27 (I) for depth from 1.50M. to 2.25M 20.00 R.M 397.20

Supplying and fixing reinforced concrete heavy duty nonpressure pipes with

collars for culverts carrying heavy traffic as per IS 458-1991 specifications

6.00 including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) 130.00 R.M 649.93

of class NP3 of following internal daimeters.(i) 300mm dia.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

7.00 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 222.11 Cu.M. 130.40

disposited layer by ramming and watering.

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF SEATING AREA AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Excavation for foundation upto 1.5M depth including dewatering, sorting out

and stacking of useful materials and disposing of the excavated stuff upto all

Loose or Soft Soil.

Providing and laying cement concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6-

2.00 hand broken stone aggregates 40mm nominal size) and curing complete 179.28 Cu.M. 3005.76

excluding cost of formwork in (A) Foundation & Plinth

Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of

3.00 foundation etc. in layers not exceeding 20cm in depth consolidating each 232.21 Cu.M. 130.40

deposited layer by ramming and watering.

Brickwork using common burnt clay building bricks having crushing strength

4.00 not less than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1- 128.33 Cu.M. 4021.02

Cement :6- Fine Sand )(B) Conventional

Brickwork using common burnt clay building bricks having crushing strength

not less than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1-

Cement :6- Fine Sand )(B) Conventional. Extra for brickwork in super structure

above floor two level

Filling, Foundation & Plinth with murrum or selected soil in layers of 20 cms

thickness including watering , ramming and consolidation etc complete.

Providing and laying River polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M.

1.1.5 laid over and jointed with grey cement slurry including rubbing and

polishing etc. complete. (B) 30 mm thick

8.00 Labour Charges For Half Round edge for Kota/Marble 260.00 R.M. 51.51

Providing and laying River polished Granite slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid

over and jointed with grey cement slurry including rubbing and polishing etc.

10.00 Labour Charges half round edge for Granite 992.80 R.M. 85.85

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:3 (1-cement :3-sand)

Providing texture plaster on Rough plaster for exterior plastering upto floor

two level as per Instruction of Engineer in-charge

Finishing Wall with Weather Proof Exterior Emulsion Paint on wall Surface

(Two Coats) to give an required shape even shade after throughly brushing

the surface free from mortar dropping and other foreign matter and sand

papered smooth. Extra for every subsequent coat of water proofing cement

paint of approved brand and manufacture.

SYNTHETIC 5 LAYER NON CUSHION SYSTEM

Providing and Laying 5 layer sport surface system. The first layer consist of

14.00 application of one coat of Bio Cum primer, Second coat of Re-Surface, Thereon 836.50 Sq.M. 959.50

application of Two coats of Resurfaces , One Textured coat and finally One

Non- Texture coat, Last line marking

Providing and laying cement concrete M250 and curing complete including the

15.00 cost of formwork but excluding reinforcement for reinforced concrete work in 110.76 Cu.M. 6656.73

( c ) Lintel ,Beams, upto two floor level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF SEATING AREA AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing M.S. grills of required pattern to wooden frame of

windows with M. S. flat at required spacing & frame alround, square or round

17.00 bars with round bars with round headed bolts and nuts or by screws. 4095.00 Kg. 101.18

Painting Three coats ( including One Coat priming coat & Two Coat enamal

Paint) on new steel and other metal surface with snthetic enamel paint

,brushing to give an even shade including cleaning surface of all dirt, dust and

other foreign matter.

Box cutting the road surface to proper slope and camber for making a base for

road work including removing the excavated stuff and depositing on the road

side slope as directed Engineer In-charge upto all Lead.

Providing & Fixing Precast Rubber Dye/ Steel dye Interlocking Concrete Blocks

60 mm thick with grade of concrete M30 pnumetic compressed/ vibrated by

mechanically pressed and as per approved design confirming to IS 15658:2006

20.00 including 35 mm sand layer for leveling and filling the joint with sand in proper 360.00 Sq.M. 1141.30

line and level as per guidelines of IRC: SP 63-2018 etc. complete. (approved

make "Vyara" or equivalent )

Providing and fixing pre-cast Vacuum Wet Press concrete kerb stone of gray

cement based concrete block 60cm length,30cm height and 125cm thick of

M250 grade concrete as per approved make "Vyara" or equivalent and design,

including excavation for fixing in proper line and level,filling the joint with C:M

1:3 (1cement:3fine sand) etc complete.

Sculpture - MORDEN ART

Supplying & erecting Sculpture size of 6X3 feet 3 in thick mt. in height made

22.00 from Corton Metal with weatherproof coating including foundation, material, 7.00 Nos 75750.00

labor, transportation, loading, unloading etc. Complete as per Instruction and

selection of Engineer in charge.

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

GARDENING WORK & MISCELLANEOUS WORK AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing & laying new Australian lawn including planting mehandi (Lawsonia

inermis) in line as per directed by Corporation.

Providing & planting new plant by Block / Strip plantation (from List) as per

directed by Corporation.

Excavation for foundation upto 1.5M depth including dewatering, sorting out

3.00 and stacking of useful materials and disposing of the excavated stuff upto all 108.00 Cu.M. 117.08

Lead.Loose or Soft Soil.

Providing, Supplying & fixing R.C.C. Bench including transportation, loading,

4.00 unloading, design etc. Copmplete as per Instruction of Engineer in-charge 20.00 Nos 2929.00

Providing & Supplying dustbin (animal shape) including transportation,

5.00 loading, unloading etc. Copmplete as per Instruction of Engineer in-charge 15.00 Nos 5656.00

Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. Pipe

(SCH -40) line including fittings make or equivalent as apprroved by Engineer In

charge. Pipe shall be fixed on the wall with the help of clamp at every two

meter C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 32 mm dia. U.P.V.C. Pipe

(SCH -40) line including fittings make or equivalent as apprroved by Engineer In

charge. Pipe shall be fixed on the wall with the help of clamp at every two

meter C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

8.00 Providing and fixing brass screw down stop tap. (A)15mm dia. 7.00 No. 205.83

Supplying & erecting approved make self-priming domestic monoblock water

pump with 1 H.P motor, suitable for operation on 230 volts, 50c/s. AC supply

9.00 with metallic flange, and M.S. impeller delivery and following discharge (a) 40 1.00 No. 7679.03

LPM at 24 mtrs. head suitable for 25mm dia. Delivery Cat.III

Providing & planting new plant(Tree) by Block / Strip plantation (like Bottle

Plam, Coconut, Fishstail Plam, Gulmohar, peltophorum, Casia(Pink/Yellow),

Sita Ashok, Garmala, Spathodea, borsali etc.) (8 to 10 feet height) as per

directed by Corporation.

Filling with good earth for plantation including watering , ramming and

consolidation etc complete.

Filling in plinth with sand under floors including watering ramming,

12.00 consolidating and dressing complete 48.00 Cu.M. 460.19

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

PROVIDING AND FIXING CHILDREN PLAY & GYM EQUIPMENT AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing Air walker/ stroller single etc. complete as

per directed by engineer in charge.

Providing and fixing Slide Ladder made from Polycarbonate etc.

2.00 complete as per directed by engineer in charge. 2.00 Nos 31007.00

Providing and fixing Marry go round with seating arrangement

3.00 etc. complete as per directed by engineer in charge. 2.00 Nos 27741.67

Providing and fixing Seesaw made from Polycarbonate Seats

4.00 and MS structure etc. complete as per directed by engineer in 2.00 Nos 9943.45

Providing and fixing Garden Swing made from Polycarbonate

5.00 Seats (Two Seats) and MS structure etc. complete as per 2.00 Nos 19543.50

directed by engineer in charge.

Providing and fixing Outdoor Slide with Curved (Spiral) design

6.00 surface made of FRP Material and MS structure etc. complete as 1.00 Nos 116150.00

per directed by engineer in charge.

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over the

run and back filling the same and making the surface as normal ground.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables. (C) 4 core 10 Sq.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting

3.00 accessories of same material at required depth in existing trench for laying of 1300.00 Mtr. 72.72

cable. below ground / road surface for enclosing cable. (A)50 mm outer dia

3.01 ---As Above---63 mm outer dia 100.00 Mtr. 85.85

3.02 ---As Above---90 mm outer dia 200.00 Mtr. 112.11

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

4.00 grade ISI marked copper wires of following size to be erected as directed. (e) 450.00 Mtr. 51.51

1.50 Sq.mm 3 core round PVC sheathed

4.01 ---As Above---(h) 2.50 Sq.mm 3 core round PVC sheathed 300.00 Mtr. 83.83

4.02 ---As Above---(k) 4.00Sq.mm 4 core round PVC sheathed 100.00 Mtr. 197.96

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

5.00 Certificate) & having back filling compound of (B) Inner chemical (CCM 16.00 Ea 10188.88

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.

6.00 dia. galvanised iron pipe with coupling and buch buried in specially prepared 30.00 Ea 434.30

earth pit complete with necessary 8 SWG earth wire.

Providing and erecting ,Fabricating the box type items made from M.S. Sheet

with A.I. supports, wings, doors, handles other hardware materials as per

7.00 requirement design with finishing by three tank powder coating processed 650.00 Kg. 212.10

inside and outside painted, erected as directed including minor civil work.

Painting by cleaning, the surface and applying one coat of primer and two

8.00 coats of enamel paint for meter cup-board or base plate suitable to match the 150.00 Sq.Mtr 171.70

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

providng and erecting Approved make energy meter 230V, 50 c/s AC up to 20A

9.00 erected as directed with three year replacement guarantee. Cat - III 3.00 Ea 1090.80

Providing and erecting metallic vitrified danger notice board as per language

10.00 suggested by engineer incharge for HIGH VOLTAGE installation to be erected 5.00 Ea 95.95

as per IS.-2551.

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not incorporate any

electronic component for following Max. rating erected as directed.Cat III. (iv)

100 Amps. FP (100 mA Sensitivity) Cat III

11.01 ---As Above---(iii) 63 Amps. FP Cat III 4.00 Ea 3585.50

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for Cat III. (b) sheet steel double door (IP-43). (iv) 12 way

(A) single phase incoming and horizontal single phase outgoing. (I) 4 way

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

14.00 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 4.00 Ea 787.80

having following capacity (b) 40 amp. Cat - III

14.01 ---As Abobe--- (V) 63 amp. Cat - III 2.00 Ea 868.60

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

15.00 having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 5.00 Ea 328.25

following capacity. (A) 6 TO 32 AMP. Cat - III

15.01 ---As Above---(B) 40 amp. Cat-III 5.00 Ea 348.45

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat III

Providing and erecting busbar chamber confirming to IS-375 fabricated from

16 G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket

and necessary busbar supports with Aluminium busbar having current density

not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly

17.00 wrapped with colour insulation tape for phase sequence, three phase & 8.00 Ea 3070.40

neutral each Suitable for following current capacity with necessary painting

mounted on wall or pedestal frame of required size with necessary

connections. (A) Suitable for 63/ 100 Amp. Capacity

17.01 ---As Above---(B) Suitable for 200 Amp. Capacity 2.00 Ea 3610.75

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing. Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. Cat III

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on PVC /

21.00 Metallic/Wooden box, single mounting base frame covered with 3.00 Pt. 629.23

textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed. Cat

III. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.Cat III. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete

---As Above---[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.Cat III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

23.00 metallic/white front plate , modules erected with necessary connections as 11.00 Ea 144.43

per site situation directed by Engineer In charge. Cat III. (1)One No. SP 6 Amp.

23.01 ---As Above---(5) Electronic hum Free steps EME Fan regulator 3.00 Ea 380.77

23.02 ---As Above---(7) Blank Plate Single 5.00 Ea 24.24

23.03 ---As Above---(8) Computer RJ-45 socket 15.00 Ea 153.52

23.04 ---As Above---(10) 6/16Amp. Universal socket 13.00 Ea 190.89

23.05 ---As Above---(12) 6Amp. / 16 Amp. Two Way switch 2.00 Ea 162.61

---As Above---(24) Batten Holder/Angle Holder with modular frame with metal

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC

24.00 fittings & Junction boxes fixed with adhesive solution & Clamps with following 300.00 Mtr. 26.26

dia of pipes, in approved manner as directed Cat III. (A) 20 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

25.00 coupling, PVC bushes, Check-nuts etc. complete of following sizes.Cat III. (1) 20 30.00 Mtr. 18.18

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following

size Cat III. (a) with medium class rigid PVC pipe and accessories. (a) 2 wire

26.01 ---As Above--- (b) 2 wire 2.5 sq. mm 365.00 Mtr. 90.90

26.02 ---As Above--- (d) 3 wire 2.5 sq. mm 300.00 Mtr. 113.12

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.Cat

III. (e) One wire 6.00 sq. mm

27.01 ---As Above---(f) One wire 10.00 sq. mm 65.00 Mtr. 102.01

27.02 ---As Above---(g) One wire 16.00 sq. mm 35.00 Mtr. 158.57

27.03 ---As Above---(h) One wire 25.00 sq. mm 10.00 Mtr. 264.62

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

28.00 Luminaire efficacy> 85 lumens/watt ,LED 10.00 Ea 439.35

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet CatIII

Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5. (A) LED Lamps integral type, with PC diffuser suitable LAMP

holder . (iii) 10 to 15 watts Cat III

(B) LED Panel Light with provision for Plane front frame with translucent cover

30.00 fixed to housing complete.IP20. (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV Cat III 5.00 Ea 722.15

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

31.00 >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( 10.00 Ea 11382.70

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(B) Flood Light (IP-65),

Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (vi) above 160 to 200 watts

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing & erecting stand alone Wall mounted PIR motion Sensor with ABS

Housing single phase AC operation. Complete with Dual element pyroelectric

sensor, Digital Signal Processing Detection Range 12 meters, angle 110 degree,

RFI and EMI immunity, Detects motion in it's coverage area. Multipurpose

32.00 device can be used as security device, an energy saving device, an automatic 3.00 Ea 5908.50

switch. Complete with infra red sensor, Light & sensitivity Sensor, Timer with

Bye pass facility. Suitable for 1000 Watts incandescent load or 750 watts of

fluorescent load.

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having

33.00 blades aluminium body and blade sets having ornamental design shanks , 3.00 Ea 2782.55

canopy erected with earthing. [ Make shall be approved by Engineer in

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

34.00 down rod erected duly painted for fan complete with proper insulation 3.00 Mtr. 126.25

without leakage and earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab

with Making the site as original.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt &

37.00 Nuts erected with necessary hook of 10 mm M.S. Round Bar. 3.00 Ea. 116.15

Providing and erecting approved make light control unit suitable to operate on

230V +20% having ON/OFF delay time of 30-50 seconds and having facility for

38.00 Auto/manual system having two LDR lens to intensity light having capacity of 2.00 Ea 2671.45

5A complete erected on section pillar with pipe and stand.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

thickness (E) 10 mm

Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete

erected as per direction Cat III . (D) 4 pole 440V 40 Amp.

Supplying and erecting approved make online Un-interruptible Power Supply

system comprising flat cum-boost charger with IGBT base rectifier & Inverter &

sealed maintenance free SMF batteries. The charger having operating capacity

for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load

power factor with battery, over/under voltage output with over load & short

circuit protection equipment. The system housed in CRC sheet duly powder

coated paint with following power backup.with MS painted batteries stand,

10% Overload capacity for momentary load.(J) 20 KVA 3 - phase with 1Hr

Supplying and erecting approved make single phase servo controlled voltage

43.00 stabilizer suitable for input voltage range 3 phase . And output voltage range 1.00 Ea 217150.00

225/235V. A.C.per phase complete erected. 80 Kva

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Light Pole :- made out of 3- 4 mtr height structure is combination of daicast

and other decorative GI pole as approved by consultant, arrangement with

base plate for surface mounting The streetlight pole shall be of ‘composite’

construction designed to withstand specified ‘dead load’ pertaining to the

luminaire and its mounting accessories and ‘wind load’ corresponding to a

basic wind speed of 169kmph without any deformation or damage to the

structure. The pole should be designed as per the stipulations of standard

EN40 to establish its structural suitability under ‘serviceability’ and ‘ultimate

limit state’ conditions. The pole should be provided with cast iron or wihout

embellishments as per the drawing. Pole Shaft should be fabricated out of

Steel tube of grade YSt 240 and batch test reports for chemical and mechanical

properties of material should be submitted along with the bid. Structurally

designed base plate of Steel A36/A572-50 or equivalent should be welded with

the pole shaft. The welding shall be of high quality, carried out by qualified

welders using approved welding procedures and tested for its quality through

NDT method, such as DP Test. The successful bidder should submit the test

reports before delivery of the material. The pole shall be provided with an

44.00 opening at the bottom with removable cover for providing LILO connectors, 30.00 Ea 44945.00

MCB, etc. (to be supplied by others). Appropriate reinforcement shall be

provided to compensate for the loss of section at this point to ensure overall

structural stability of the pole under specified operating conditions. The pole

shaft structure shall be hot dip galvanized through single dip process as per

ASTM A123 and minimum average coating shall not be less than 65 microns.

No mechanical operation, such as welding, drilling, etc. should be carried out

on the pole structure post hot dip galvanizing. Poles using pre galvanized steel

tubes or hot dip galvanized through double dip process are not acceptable.

Complete pole shall be treated with high quality primer and thereafter coated

with Polyurethane paint to minimum average DFT of 70 microns. The painting

shall be carried out by experienced and trained technicians using proven and

established painting procedure. Only ‘controlled’ paint drying process shall be

used to ensure proper adhesion and finish of the paint.4M height pole

matching as technenical specification and should be compatible to intall CCTV

or PA system on the Pole. (Make ;-Neri, K lite, Keselec , Nisus)

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

SITC of approx of 8-16 W surface mounted LED Bollard fixture with delivered

Luminous flux of minimum 60lm/W. FIxture should have body in die-cast

aluminium/extrusion and glass sealed optical chamber. The luminaire shall

have a rated system lifetime of 50,000 burning hours at L70. The luminaire

should have a colour temperature of 3000k and CRI > 70 and IK10 with IEC

60598 certification. The luminaire shall meet IP66 with THD < 10% and PF >

0.9. Operating Voltage 140-270VAC,The Surge Protection to be provided

conforming to relevant IS standards/IEC 61643-II Class-2 , Quality Standard ISO

9001, Environmental Standard ISO 14001, Luminaire shall have dual optics with

primary optics distribution of 120degree or higher and secondary optics as per

site/boq requirement. All the luminaires shall have LM-80.Radiation Emission

Measurement as per CISPR.15:2018, Conducted Emission Measurement as per

CISPR.15:2018, Output voltage ripple should be within 3%, Full Load Efficiency

of the driver ≥ 85%. The total power consumption should not exceed 20W

45.00 (including driver). Luminaires and driver both shall be BIS certified individually. 25.00 Ea 16665.00

Heat sink used should be extruded Aluminum or Pressure Die-Cast Aluminum

having high conductivity preferably ADC 12 or LM6. An extruded silicon loop

gasket shall be provided in the lantern body to ensure a weather proof seal

between the cover and the metal housing to exclude the entry of dust, water,

insects, etc. Luminaire should conform to degree of protection of IP 65 or

above. Mini 1P68 water proof Gel box connector with PP Glue to be provided.

Fixture should have beam distribution of 60° , 120° , 180°, 360° , or as per

consultant. The manufacturers name/logo should be engraved/embossed on

the housing/body or Name/Logo on aluminum plate labels or Name/logo

printed on housing/body, Fixture dimension should be 750-1500 mmHeight

and custom Dia as per fixture wattage and approval as per lighting

consultant/architect. (Make ;-Philips, Jaguar,Neri, K lite, Keselec , Nisus,

Havells,Dimano)

Supply of LED Light Supply, erecting, testing & commissioning of Decorative

Luminaires for Urban lighting, body made of painted spun aluminium, The

protector is made of polycarbonate grade UVresistant (IK 09- presented with IS

10322 report from 3rd NABL approved lab), Permanently sealed optical

compartment (comply by presenting technical data sheet ) with IP66

protection ( presented with IS10322 report from 3rd party NABL approved

lab). Luminaire offers tool free access to gear compartment with IP65

protection. Luminaire can be installed as a suspended luminaire. The luminaire

is equipped with PMMA lenses with wide photometry for increased pole

spacing.The luminaire is provided with disconnector to avoid electrical

shocks.Easy access to control gear compartment by

opening special latch kind of arrangement .Luminaire is provided with built in

under/over voltage protection Fixture is having a surge protection of 10KV.

Electronic driver is having power factor>0.90*, THD<20*% and input voltage

range from 120-227V AC at 50Hz. Luminaire efficacy is 120 im/ watt system

lumen 3600 lumen ( presented with LM79 report from 3rd party NABL lab ) in

CCT range of 4000 as per ANSI. System life of 50000 burning hours with 70% of

initial lumens maintained. Luminaire is suitable for operating temperature (Ta)

from -20 to 50c. Driver can withstand 320V AC for 48 hours and 360 V AC for

hours. the offered luminar must have BIS certificate including Junction Box IP

65 - (Make;-Philips,Havells,Jaguar,Neri , Keselec , Nisus, K lite.)

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Pojector :- Supply, Installation, Testing and Commissioning of

Advance Technology Gobo Projector for special objects

projections, Rated Voltage : AC 100-240V 50/60 Hz, Power factor: >0.93,

Safety Class : Class-I, ESD Protection : IEC61000-4, Light Source : High Power

LED, Light Source Life

: >50000 hours, Beam Angle : 10°~40°, Rated Power : 80-120W, Housing

Material : Alluminium Alloy & heat proof engineering plastic, Color :

colors + white color, rainbow effect, Rotating Gobo :

interchangeable glass gobos or metal gobos, Gobo Rotation : Rotate

clockwise and anticlockwise at variable speed, Focus : Electric linear

focus, Zoom : Electric linear zoom, Ingress Protection : IP65, Color

Cooling : With rapid-speed fans.

Spot Light:- Supply of Narrow/Wide Beam (As per requirment round shape

fitting) LED spot light with require mounting, IP-67, System Limen: minimim

720 Lm, Dc Current: 700 mA, Efficency: >60%, Efficacy: 61 Lm/w, CCT (K):

to 5700 K, CRI> 90+, Macdam: 3 SDCM, Beam Angle: 10/26/35 (Oval Bean

+40 Degree), UGR value: <10, Tunable: Yes, Housing to be made in pressure

die-cast Aluminium with color coated as per desired color. Cover should be in

Stainless Steel. Fixture should be adjustable & lockable at certain angle. Fixture

need to be mount on floor surface mounted based with SS Screws.To ensure

proper heat dissipation, stability and long lifespan of LED Light more than

50000 burning hours, Optical lens/Reflector for proper light distribution,

Lampshade adopts high strength toughened glass, resist the impact and

friction. High brightness COB/SMD LED light source, high flux output, excellent

consistency of light color. Highly reliable inbuilt LED Driver/External

Driver,Input Voltage : AC 165-260V, Operating Temperature : -10°C to +55°C,

Operating Humidity : 10%-90%, Warranty : 2 years,ample Should be submitted

for concerned engineer incharge for approval of light fixture.A) Watt 6 to

SITC Of 7-9 meter area lighting pole with 6 nosx45 watt round projector with a

lights including antiglare snoots, 2000 lumens, 30° beam a contemporary

design that is both timeless and unique in its impression.Compact without

visible mounting equipment and optimised integration,Polar is in perfect

continuity with the geometric lines of the square column.These assemblies are

ideal for surroundings of contemporary architectural constructions.Integrated

with LED Modules. Polycarbonate optical lens. Protection class IP65. Integral

power supply. Earth connection. Safety class I. CE- Conformity mark. Pole

made of Mild Steel. Pole design parameters vary depending on the type of

49.00 bracket and loading factor. All pole sections are welded using special v groove 2.00 Ea 298606.50

technique by certified welders using high end MIG welding processes. Built-in

control box with cast aluminium service door and safety rope. The control gear

tray is prewired with MCB,terminal connectors for loop-in / loop-out

arrangement. The foundation bolt holes in the base plate are designed to be

elongated for fine adjustments / alignment of the pole during installation. Base

plate made of steel grade E250 & foundation bolt of grade 4.6. K Lite KP-1063./

Ligman/Unilamp/Nisus.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

SITC of high quality 26 watts Powerful sound projector. outside diam. in mm

width in mm 187 loudspeaker system dual cone woofer cone material coated

paper colour grey SPL 1W.1m in dB 92 frequency response in Hz 90 D 19 k

grille main material aluminium applicable low impedance No Vertical

dispersion angle 1000 Hz 180D Net weight product (kg) 1.90 height in mm

50.00 depth in mm 270 woofer size in inch 6.5 mounting system UDbracket 100V 15.00 Ea 28746.62

transformerpower taps in watts 26 D 20 D 10 max SPL 1m in dB 107 main

construction material ABS plastic IP rating 56 applicable in 100V Yes closest

RAL colour (subject to deviations) RAL9006.[Make. Biamp

MP26DG.Bose.Martin Audio]

SITC of TwoDchannel, 600Dwatt analog amplifier The amplifier channels are

extremely flexible in that they can individually be selected to drive either

51.00 ohm, 8 ohm, 70 V or 100 V They also support power sharing so that up to twice 1.00 Ea 258747.76

the power can be delivered by any channel. [Make. Biamp Voltera

600.2.Bose.Martin Audio]

SITC of an ultraDcompact mixing console Number of Inputs 4 mic. line +

stereo input + USB + Bluetooth Gain control with 2Dband EQ per

channel.BuiltDin echo.delay processor with unique EDdelay.Clip LED indication

52.00 per channel.Signal and clip LED indication for master level. 1.4. TS unbalanced 1.00 Ea 59760.39

L.R main output. USB MP3 media player onboard with transport control and IR

remote control. [Make. Studiomaster Mini 6U.Behringer.Yamaha]

SITC of high&minus;quality twisted pair cable designed for connecting

speakers and amplifiers in commercial or residential AV systems.Conductors

are stranded 16AWG copper and the conductor jackets are color&ndash;coded

red.black. Rugged and flexible jacket with sequential markings every meter.

Low capacitance due to high strand count, 26.30. [Make. Kramer

BCD2S.Extron.Norstone]

SCHEDULE D B 3.3 Audio Video (AV) Elements SITC of 2.0 Megapixel , IP base,

Full HD,day Night, Out Door PTZ Dome CCTV camera including POE Injector,

PTZ Power Adaptor and Bracket etc as per site requirement having following

features . &bull; 1080p Full HD images up to 30 fps &bull; Lens ,D 3.4 mmD143

mm , 30x &bull; Super high resolution at Full HD . 1,920 x 1,080 created by

Approx. 1.3 to 1.2.8 MOS image sensor &bull; Multiple H.264 (High profile)

streams and JPEG streams ensure simultaneous real time monitoring and high

resolution recording &bull; Full frame (Up to 30 fps) transmission at 1,920 x

1080 image size &bull; Minimum 30x optical zoom 90x extra optical zoom at

640x360 resolution with 12x digital zoom enabling 1080x zoom. &bull; Super

Dynamic and ABS (Adaptive Black Stretch) technologies deliver 128x wider

dynamic range compared to conventional cameras. &bull; Face Super Dynamic

technology ensures clear face image. &bull; High sensitivity with Day.Night

(ICR*) function. 0.3 to 1.7 lx (Color), 0.03 to 0.3 lx (B.W) at F1.6 * ICR. IR Cut

filter Removal &bull; VIQS (Variable Image Quality on Specified area)

technology allows the designated 2 areas to retain higher image quality while

the excluded area will have a decreased image quality, which enables to use

lower image file size and bit rate. VIQS can be set on preset position (1 to 8)

and except preset. &bull; Digital Noise Reduction. 3DDDNR ensures noise

reduction in various conditions &bull; Progressive scan ensures clear images

with less motion blur and no tearing even when the subject is moving. &bull;

Electronic sensitivity enhancement. Auto (Up to 16x). OFF

Supply, Installation, Testing and Commissioning of Fixed Bullet IP Camera D1.3.

Progressive CMOS, ICR, 0lux with IR, 1920x1080. 25fps(P).30fps(N) , 6mm.F2.0

55.00 lens (4mm, 12mm optional), H.264. MJPEG, dualDstream, IP66, DC12V and 15.00 Ea 25906.50

PoE, DWDR, 3D DNR, BLC, IR range. up to 30m, Bracket included.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

SITC of 32 CHANNEL Network Video Recorder for IP CCTV Camera with 1080P

realtime live view including up to 2 SATA HDDs with 20TB Storage Capacity for

Recording etc as per site requirement having following features and Attached

specifications . DH.264.MJPEG dual codec decoding , 256Mbps incoming

bandwidth, 5Mp resolution previewandplayback HDMI.VGA.TV simultaneous

video output 32 channel synchronous realtime playback, GRID interface

Support MultiDbrand network cameras ONVIF Version 2.4 conformance 3D

intelligent positioning with PTZ camera PreDalarm Recording, Camera control,

RJD45 Network Port up to 4 SATA HDDs with 16TB storage capacity , 1 eSATA

port, 2 USB(1 USB3.0) Multiple network monitoring. Web viewer, CMS(PVMS)

and Smart Phone(PMOB)

Supply, Installation, Testing and commissioning of 6 TB Surveillance series

Hard disk as per tender specification.As per approved Make List.

24 port 10.100.1000 Mbps Switch with Power over Ethernet (PoE) xStack L2

Managed Stackable Gigabit Switches with Interface of 20 10.100.1000BASEDT,

4 Combo,10.100.1000BASEDT.SFP,2 10DG Cx4, 88 Gbps Switching

Capacity,Flash Memory 32 MB, &bull; Physical Stacking Up to 40G Stacking

Bandwidth and Up to 6 units per Stack, Full L2 Features, Double VLAN

(QDinDQ), PortDbased QDinDQ

59.00 1 GBPS SFP Media Convertor 1.00 Ea 19543.50

60.00 Supply and laying of 6 Core single mode Fiber Cable with Conduit. etc. 3.00 Ea 181.80

61.00 Supply,Installation,Testing and Commissioning of 12 Port LiU.etc. 1.00 Ea 15907.50

Supply and Laying of CAT 6/ Fiber Cable with Conduit etc as per site situation

Supply,Installation,Testing and Commissioning of 9U Weather Proof Rack with

Accessories. etc.

Supply,Installation,Testing and Commissioning of 24 Port Loaded Patch Panel.

65.00 CatD6 Patch cord D 1 Meter 5.00 Ea 449.05

Supply,Installation,Testing and Commissioning of Duplex LCDLC Single Mode

Fiber Patch Cord 3 ft.etc.

Supply of approx 20W/M, 24V flexible RGBW LED homogenous profile

luminary for exterior top crown structure wash application. The housing of the

material should be made of PCB Silicon Tube and the LEDs should be SMD

type. The delivered lumen output of the fixture should be around 30lm/W.

Power output of the fixture should be approx 10-20W/M.The protection rating

of the fixture should be IP67. Power output of the fixture should be . The

fixture should be of beam distribution of 120˚. Fixture should be RGBW. The

width and height of the fixture should be around 12mm and 10mm

respectively. Fixture should come with rigid Installation Aluminium U profile /

Difusser / Splitter & Decoder as per site requirement. (Make;-

Philips,Havells,Jaguar,Neri , Keselec , Nisus.)

SITC of Metal Fabricated innovative, decorative, atttractive

sculpture/model /Structure as instruction and site requirement

instructed by engineer in charge or consultant/Architect with required

necessary powder coating,color in sheet metal , Pipe, box,angle etc , The

scope includes necessary fastners,necessary civil works for installation,

laser,CNC cutting , Powder coating ,bending etc. (Department can demand any

type of Metal Steel Sculpture/ structure as per design.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH DECORATIVE POLE AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

SITC of Korean /ACP/Acrylic/Metal/Wood material's illumination work

including laser cut , frameing ,lighting /signages as per instructed bty

engineer in charge.Note ;- The scope includes necessary

fastners,Civil works, laser,CNC cutting , Powder coating ,bending etc.

(Department/Consultant/ Client demand any type of Sculpture/ structure as

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF GAZEBO AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Excavation for foundation upto 1.5M depth including sorting out and

1.00 stacking of useful materials and disposing of the excavated stuff upto 50 11.57 Cu.M. 117.08

Meter Lead.Loose or Soft Soil.

Providing and laying cement concrete 1:3:6 ( 1: Cement : 3- Coarse Sand :

6- hand broken stone aggregates 40mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation & Plinth

Providing and laying controlled cement concrete M250 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in ( A ) Foundation, footing, Base of Columns

and mass concrete

Filling available excavated earth ( excluding rock ) in trenches, plinth,

4.00 sides of foundation etc. in layers not exceeding 20cm in depth 11.57 Cu.M. 130.40

consolidating each deposited layer by ramming and watering.

Providing Thermo Mechanically treated bars (TMT bars ) FE 500D

5.00 reinforcement for R.C.C work including bending ,binding and placing in 207.76 Kg 76.22

position complete up to floor two level.

Steel work welded, in built up sections, framed work including cutting

hositing, fixing in position and applying a priming coat of red lead paint.

(B) In trusses and trussed purlins upto 25 m span and 15m overall hight

Providing Pre-Coated Designer corrugated/plain G.I. sheets roofing fixed

with galvanised iron “J” or “L” hooks bolts and nuts 8 mm diameter with

7.00 bitumen and G.I. limpet washeres, filled with white lead complete 36.00 Sq.M. 727.13

excluding the cost of purlins rafters and trusses (1) 0.60 mm thick sheet.

Painting two coats ( including priming coat ) on new steel and other metal

surface with snthetic enamel paint ,brushing to give an even shade

including cleaning surface of all dirt, dust and other foreign matter.

Brickwork using common burnt clay building bricks having crushing

strength not less than 35kg/Sq.cm. In foundation and plinth in Cement

mortar 1:6 ( 1-Cement :6- Fine Sand )

(B) Conventional

Providing 15mm thick cement plaster in single coat in brick/concrete wall

for interior plastering upto floor two level and finished even and smooth

in. (I) Cement Mortar 1:3 ( 1-Cement : 3-Sand)

Providing and laying River polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

11.00 L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing 78.00 Sq.M. 1308.76

and polishing etc. complete. (B) 30 mm thick

12.00 Labour Charges For Half Round edge for Kota/Marble 36.00 R.M. 51.51

Finishing Wall with Weather Proof Exterior Emulsion Paint on wall Surface

(Two Coats) to give an required shape even shade after throughly

brushing the surface free from mortar dropping and other foreign matter

13.00 and sand papered smooth. Extra over Item 51 for every subsequent coat 90.43 Sq.M. 88.77

of water proofing cement paint of approved brand and manufacture.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF GAZEBO AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete with 6A Modular type

switch / bell push & accessories and earth continuity of following type,

14.00 erected on PVC / Metallic box, single mounting base frame covered with 2.00 pts 449.45

textured/metallic front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid PVC pipe and accessories cat III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following

size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

16.00 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing 1.00 Ea 668.62

box having following capacity (B)40 Amp cat III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester

powder coated and high U.V. & corrosion resistance with diffuser and/or

Polycarbonate optics with company mark/name 120 to 300 V,Power

Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio

17.00 >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % 2.00 Ea 373.70

CREE / OSRAM / PHILIPS Lumileds / NICHIA/ EOUL/Bridgelux (U.S.A.) make

LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates)

(A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF PANEL ROOM AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Excavation for foundation upto 1.5M depth including dewatering & sorting out

1.00 and stacking of useful materials and disposing of the excavated stuff upto 50 32.70 Cu.M. 117.08

Meter Lead.Loose or Soft Soil.

Excavation for foundation 1.5M to 3.0M depth including dewatering & sorting

2.00 out and stacking of useful materials and disposing of the excavated stuff upto 1.94 Cu.M. 129.81

50 Meter Lead. Loose or Soft Soil.

Filling available excavated earth (exluding rock)in trenches plinth,sides of

3.00 foundation etc.in layer not exceeding 20cm in depth consolidating each 34.64 Cu.M. 130.40

disposited layer by ramming and watering.

Filling, Foundation & Plinth with murrum or selected soil in layers of 20 cms

4.00 thickness including watering , ramming and consolidation etc complete. lead 12.36 Cu.M. 432.66

Providing and laying cement concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6-

5.00 hand broken stone aggregates 40mm nominal size) and curing complete 4.12 Cu.M. 3005.76

excluding cost of formwork in (A) Foundation & Plinth

Providing and laying controlled cement concrete M250 and curing complete

including the cost of formwork but excluding reinforcement for reinforced

concrete work in Foundation, footing, Base of Columns and mass concrete

Providing and laying controlled cement concrete M250 and curing complete

7.00 including the cost of formwork but excluding reinforcement for reinforced 3.26 Cu.M. 7400.58

concrete work in Column, upto two floor level.

Providing and laying controlled cement concrete M250 and curing complete

8.00 including the cost of formwork but excluding reinforcement for reinforced 3.36 Cu.M. 6656.73

concrete work in Beams upto two floor level.

Providing and laying controlled cement concrete M250 and curing complete

including the cost of formwork but excluding reinforcement for reinforced

concrete work in Shelves, Lintel, slab, landing upto two floor level.

providing and mixing water proofing material in cement in mix proportion

10.00 recommended by the manufacturers. 32.53 Lit 49.16

Brickwork using common burnt clay building bricks having crushing strength

11.00 not less than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1- 3.21 Cu.M. 4021.03

Cement :6- Fine Sand ) (B) Conventional

Brickwork using common burnt clay building bricks having crushing strength

not less than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1-

Cement :6- Fine Sand ) (B) Conventional. Extra for brickwork in super structure

above floor two level

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished

14.00 even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 62.35 Sq.M. 194.08

Providing 20mm thick sand faced cement plaster on walls upto height 10mt.

Above ground level consisting of 12mm thick backing coat of C.M. 1:3 ( 1-

cement : 3-sand ) and 8mm thick finishing cost of C.M.1 :1 ( 1-Cement : 1-

Sand) etc. complete.

16.00 Providing throating or plaster drip and moulding ao R.C.C. Chhajja 8.12 R.M. 41.00

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain

or slope and to be tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid etc. as directed.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF PANEL ROOM AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and laying 24" x 24" Vitrified 8mm thick tiles flooring over 20mm

(Average) base of Cement Mortar 1:6 (1-cement : 6-coarse sand) on new

surface or fixing on existing flooring by sdhesive materials including

dismentalling of existing flooring and jointed with colour cement slurry

including finished with flush pointing & cleaning the surface etc. complete for

providing and laying Granite slab flooring or dedo over 20 mm base of cement

mortar 1:6 (1 cement :6 coarse sand ) or L.M. 1:1.5 laid & jointed with gray

cement slurry including rubbing and polishing complete.

20.00 Labour Charges For Half Round edge for Granite 30.60 R.M. 85.85

Providing cement vata ( 10cm x 10cm size ) quarter round in cement mortar

1:1 including neat cement finishing watering etc. complete.

Provoding and fixing flush door shutters, solid core construction with frame of

first class hardwood with cross board and face veneer or plywood face panels,

including anodised alluminium butt hinges with necessary screws. (B) Non-

22.00 decorative type and block board core anodised alluminium butt hinges in flush 2.10 Sq.M. 2689.80

door shutters (2) 35 mm thick.

Extra for using bright finished M.S. piano hinges of (A) Nickel plated piano

Providing and fixing M.S. grills of required pattern to wooden frame of

windows with M. S. flat at required spacing & frame alround, square or round

23.00 bars with round bars with round headed bolts and nuts or by screws. (Plain 144.00 Kg. 101.18

Painting two coats ( including priming coat ) on new steel and other metal

surface with snthetic enamel paint ,brushing to give an even shade including

cleaning surface of all dirt, dust and other foreign matter.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

Wall Painting (Two coats) with plastic emulsion paint of approved brand &

manufacture on under coated wall surface to give an even shade including

throughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Finishing Wall with Weather Proof Exterior Emulsion Paint on wall Surface

(Two Coats) to give an required shape even shade after throughly brushing

the surface free from mortar dropping and other foreign matter and sand

papered smooth. Extra over Item 51 for every subsequent coat of water

proofing cement paint of approved brand and manufacture.

Providing and fixing extruded aluminum window, door or partition having

extruded aluminum Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm (of Jindal Section no:2443,@ Wt.1.384 Kg/mt), horizontal

Four track member size 122.20mm x 31.75mm x 1.10mm (of Jindal Section

no:8787,@ Wt. 1.205 Kg/mt),vertical member of size 122.20mm x 31.75mm x

1.50mm (of Jindal Section no:8935,@ Wt. 1.398 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @

wt.of 0.456Kg/mt),vertical member of size 40mm x 18mm x 1.29mm (of Jindal

Section no:8947 @ wt.of 0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with

mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF PANEL ROOM AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including making good

the wall ceiling and floor. (G)110 mm

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on PVC /

31.00 Metallic/Wooden box, single mounting base frame covered with 1.00 pts 638.32

textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

32.00 covered with textured / metallic/white front plate modules erected on / in 1.00 pts 257.55

wall / ceiling with following type accessories

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

33.00 metallic/white front plate , modules erected with necessary connections as 2.00 Ea 51.51

per site situation directed by Engineer In charge. (2) 16 Amp. SP one way

switch. Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

34.00 metallic/white front plate , modules erected with necessary connections as 2.00 Ea 82.82

per site situation directed by Engineer In charge. (3) 6/16Amp. Universal

socket. Cat. III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories (c) 3 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories (d) 3 wire 2.5 sq. mm

Providing & Erecting following Shockproof tissino type accessories erected on

37.00 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal Box. erected on wall/ 4.00 Ea 22.22

ceiling. (8) Bakelite lamp holder

Supplying KITKAT pattern porcelain cut-out with base of following current

capacity erected on existing block board.(v) 100 A. 500 V

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF PANEL ROOM AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V

39.00 A.C. system and having breaking capacity 10 KA to be erected in existing box. 1.00 Ea 112.11

confirming to IS 8828/1996 with ISI Mark cat III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

40.00 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 1.00 Ea 737.30

having following capacity (c)63 Amp cat III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for (A) single phase incoming and horizontal single phase

outgoing (b) sheet steel double door (IP-43) (ii)6 way

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having

43.00 blades aluminium body and blade sets having ornamental design shanks , 1.00 Ea 2311.89

canopy erected with earthing. [ Make shall be approved by Engineer in

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF PANEL ROOM AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

44.00 LED driver efficiency > 85 % 2.00 Ea 373.70

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iii) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF COMPOUND WALL AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Demolition of Brick work and stone masonry including stacking of serviceable

1.00 materilas and disposal of unserviceable materials with all lead and lift.(ii) In 231.20 Cu.M. 536.09

Dismentling barbed / chainlink wire in fencing including making rolls and also

including dismentling fencing posts including all earth work concrete in base

2.00 and making good the disturbed ground stacking useful materials as directed 384.00 R.Mt. 64.91

and disposing as directed and disposing of the unserviceable materials with all

Excavation for foundation upto 1.5M depth including sorting out and stacking

3.00 of useful materials and disposing of the excavated stuff with all Lead. Loose or 709.13 Cu.M. 117.08

Providing and laying cement concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6-

hand broken stone aggregates 40mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation & Plinth

Providing and laying cement concrete M250 and curing complete including the

5.00 cost of formwork but excluding reinforcement for reinforced concrete work in 116.44 Cu.M. 4466.21

( A ) Foundation, footing, Base of Columns and mass concrete

Providing and laying controlled cement concrete M250 and curing complete

6.00 including the cost of formwork but excluding reinforcement for reinforced 57.76 Cu.M. 7400.57

concrete work in ( c ) Columns

Providing and laying cement concrete M250 and curing complete including the

7.00 cost of formwork but excluding reinforcement for reinforced concrete work in 54.24 Cu.M. 6656.73

( c ) Lintel ,Beams, upto two floor level.

Brickwork using common burnt clay building bricks having crushing strength

not less than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1-

Cement :6- Fine Sand ) (B) Conventional. Extra for brickwork in super structure

above floor two level

Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of

9.00 foundation etc. in layers not exceeding 20cm in depth consolidating each 709.13 Cu.M. 130.40

deposited layer by ramming and watering.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

10.00 binding and placing in position complete upto floor two level 25554.40 Kg 76.22

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing and fixing M.S. grills of required pattern to wooden frame of

windows with M. S. flat at required spacing & frame alround, square or round

12.00 bars with round bars with round headed bolts and nuts or by screws. 18660.00 Kg. 101.18

Painting Three coats ( including One Coat priming coat & Two Coat enamal

Paint) on new steel and other metal surface with snthetic enamel paint

,brushing to give an even shade including cleaning surface of all dirt, dust and

other foreign matter.

Providing texture plaster on Rough plaster for exterior plastering upto floor

two level as per Instruction of Engineer in-charge

Finishing Wall with Weather Proof Exterior Emulsion Paint on wall Surface

(Two Coats) to give an required shape even shade after throughly brushing

the surface free from mortar dropping and other foreign matter and sand

papered smooth. Extra for every subsequent coat of water proofing cement

paint of approved brand and manufacture.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF COMPOUND WALL AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (C) Post Top Lantern

LED fitting comprises of finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP 65 (i)20- 30W Cat-lll

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables. (C) 3 core 6 Sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following size to be erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

20.00 suitable for following type of applications. 2.00 Each. 8636.51

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for

operation on 3 phase and neutral 415V. having characteristic of quick action &

21.00 tripping with all advance feature & do not incorporate any electronic 2.00 Each. 4314.72

component for following Max. rating erected as directed.

(iv) 100 Amps. FP (100 mA Sensitivity) Cat. III

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF COMPOUND WALL AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying & erecting IP 55 grade 150 x 90 x 75 cms section pillar fabricated

from 14 Gauge thick joint less M.S. Sheet with angle iron legs 95 cms long

made from 40 x 40x 6 mm thick. Jointless M.S. Angle with cable clamps to be

buried in ground to have appropriate erection to work Uniform Until erected

with cement concrete foundation and 45 cms high bricks work finishing with

plaster etc. hinged double door with 4" x 6" vision panel covered with Mesh &

V. panel overlapping with flap for meter reading internally supported on both

side, with internal and outside looking arrangement with look and keys in

duplicate 40 x 40 x 6 mm M.S. Angle of Two Nos. one is welded and other with

nut and bolt for erecting bakelite sheet. Painting the Section Pillar inside and

out side with three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP 55 test & followed by

Supplying and erecting bakelite sheet 8mm thick HYLAM make on existing

angle iron frame.

Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal current rating up to 125A. with

24.00 Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with 1.00 Each. 8055.76

all internal connections & complete erected in existing 16 G.M.S. housing.

Supplying & erecting power contactor for time switch complete erected as per

25.00 direction Cat III 1.00 Each. 2782.55

[D] 4 pole 440V 40 Amp.

Erection & connection Charges for 63A/100A TP as following

(b) Erection on angle iron frame duly painted with Red Oxide

Providing and erecting busbar chamber confirming to IS-375 fabricated from

16 G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket

and necessary busbar supports with COPPER busbar having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulation tape for phase sequence, three phase &

neutral each suitable for following current capacity with necessary painting

mounted on wall or pedestal frame of required size with necessary

(B) Suitable for 200 Amp. capacity

Providing Approved make Triple Pole Metal Clad Switch Fuse Unit 415/500 V.

with HRC fuse of suitable load and neutral link confirming to IS.

(a) 32 A Cat III

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR DEVELOPMENT WORK OF KHETA LAKE FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF COMPOUND WALL AT KHETA TALAV AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying & erecting approved make IP 55 grade Company fabricated Timer

Panel of following capacity for switch On-Off street lights on time scheduling

basis made from 16G CRCA sheet duly epoxy power painted inside and outside

with hinged doors and locking arrangement consisting of suitable size of 4 Pole

29.00 MCB and 4 pole contactor (cat-III)with analog time switch, auto manual switch 1.00 Each. 17059.91

of same make and suitable input and output Bakelite terminals and with door

earthing approved by Engineer in charge.

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad