CWE/AF AMB/AMB-44/2023-24 REPAIR AND MAINT TO STEEL FURNITURE INCLUDING PAINTING FOR AFS AMBALA, RAJPURA, BAKNAUR, KALPI AND PATIALA UNDER GE (AF) AMBALA

Amount

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Almirah large steel with shelves (FD-67 & FD-1031) including reassembling complete all as shown in FD drawings:-

S&F legs base in "U" shape made out of 1.25mm thick PGI sheet welded with electric welding machine to match with existing complete all as specified & directed.

S&F MS rod for locking device 10 mm dia as per required shape & size complete all as specified & directed.

S&F shelves made out of 1.00 mm thick MS sheet over all size 485mm x 920mm complete all as specified & directed.

S&F CP handle as per existing pattern and design of Almirah complete all as specified & directed.

S&F 3 way lock, 4 levers with duplicate keys complete all as specified & directed.

S&F MS cleat for shelves made out of 1.00mm thick MS sheet complete all as specified & directed.

S&F key hole cover outer side best quality approved by GE complete all as specified & directed.

S&F key hole cover inner side made out of 1.00 mm thick MS sheet complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Almirah large steel for painting, applying one coat of spray painting to almirah large steel inner and outer surface with synthetic enamel paint olive green/Amaton over & including one coat of red oxide primer complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Locker Bed Side steel or Locker Built in (FD-1029) including reassembling complete all as shown in FD drawings:-

S&F legs base in "U" shape made out of 1.25mm thick PGI sheet welded with electric welding machine to match with existing complete all as specified & directed.

S&F Aluminium hasp and staple of size150mm complete all as specified & directed.

S&F shelves made out of 1.00mm thick MS sheet size as per drawing complete all as specified & directed.

S&F CP MS handle of size 100mm as per sample complete all as specified & directed.

S&F door shutter made out of 1.00mm thick MS sheet size as per drawing complete all as specified & directed.

S&F MS cleat for shelves made out of 1.00 mm thick MS sheet complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Locker bed side steel for painting, applying one coat of spray painting to inner and outer surface with synthetic enamel paint olive green over & including one coat of red oxide primer complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Almirah small steel (FD-1032) including reassembling complete all as shown in FD drawings:-

S&F legs base in "U" shape made out of 1.25mm thick PGI sheet welded with electric welding machine to match with existing complete all as specified & directed.

S&F MS rod for locking device 10mm dia as per required shape & size complete all as specified & directed.

S&F shelves made out of 1.00mm thick MS sheet over all size 440mm x 765mm complete all as specified & directed.

S&F CP MS handle as per existing pattern and design to any type of Almirah complete all as specified & directed.

S&F 3 way lock, 4 levers with duplicate keys complete all as directed and specified.

S&F MS cleat for shelves made out of 1.00mm thick MS sheet complete all as specified & directed.

S&F key hole cover outer side best quality approved by GE complete all as specified & directed.

S&F key hole cover inner side made out of 1.00mm thick MS sheet complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Almirah medium steel with shelves for painting, applying one coat of spray painting to almirah medium steel inner and outer surface with synthetic enamel paint olive green/Amaton over & including one coat of red oxide primer complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Form with Back (FD-78) including reassembling complete all as shown in FD drawings:-

Removing the existing userviceable broken seat plank and S&F new 2nd class hard wood (Bijasal/Hollock) seat plank of size 255mm x 1525mm, 18mm thick fixed to steel frame with GI nut/bolt & washer and duly polished with french polish glossy finish of adequate coat complete all as specified & directed.

Removing the existing userviceable broken back plank and S&F new 2nd class hard wood (Bijasal/Hollock) seat plank of size 255mm x 1525mm, 18mm thick fixed to steel frame with GI nut/bolt & washer and duly polished with french polish glossy finish of adequate coat complete all as specified & directed.

S&F legs made out of 25mm square conduit 16 gauge including cutting, welding to required length complete all as specified & directed.

S&F stiffners made out of 25mm square conduit 16 gauge including cutting, welding to required length complete all as specified & directed.

S&F rubber shoe for leg complete all as specified & directed.

M&L Point welding as required complete all as specified & directed.

M&L preparing of steel surface of Form with back and applying one coat of synthetic enamel paint of required colour complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Form without Back (FD-1027) including reassembling complete all as shown in FD drawings:-

Removing the existing userviceable broken seat plank and supply & fix new 2nd class hard wood (Bijasal/Hollock) seat plank of size 255mm x 1525mm fixed to steel frame with GI nut/bolt & washer and duly polished with french polish glossy finish of adequate coat complete all as specified & directed.

S&F legs made out of 25mm square conduit 16 gauge including cutting, welding to required length complete all as specified & directed.

S&F stiffners made out of 25mm square conduit 16 gauge including cutting, welding to required length complete all as specified & directed.

S&F rubber shoe for leg complete all as specified & directed.

S&F Point welding as required complete all as specified & directed.

M&L preparing of steel surface of Form without back and applying one coat of synthetic enamel paint of required colour complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Table clerk steel (FD-1004) including reassembling complete all as shown in FD drawings:-

S&F top of table made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F drawers of table made out of 1.00mm thick MS sheet over all size of drawer 350mm x 430mm & 410mm deep complete all as specified & directed.

S&F back of box of table made out of 1.00mm thick MS sheet complete all as specified & directed.

S&F side of box of table made out of 1.00mm thick MS sheet complete all as specified & directed.

S&F Drawer lock with duplicate keys make apporved by GE complete all as specified & directed.

S&F leg made out of 25mm square conduit 16 gauge including cutting welding to requied length of adequeate size complete all as specified & directed.

S&F rubber shoe for leg complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Table office clerk steel including drawer for painting, applying one coat of spray painting with synthetic enamel paint as per required colour over & including one coat of red oxide primer complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Table officers steel (FD-1003) including reassembling complete all as shown in FD drawings:-

S&F table top made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F drawer of table made out of 1.00mm thick MS sheet, over all size drawer as per drawings complete all as specified & directed.

S&F shutters to the box fabricated out of 1.00mm thick MS sheet complete all as specified & directed.

S&F back of box of table made out of 1.00mm thick MS sheet complete all as specified & directed.

S&F side of box of table made out of 1.00mm thick MS sheet complete all as specified & directed.

S&F Drawer lock with duplicate keys make apporved by GE complete all as specified & directed.

S&F of rubber shoe for leg complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Table office officers steel including drawer for painting, applying one coat of spray painting with synthetic enamel paint as per required colour over & including one coat of red oxide primer complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Teapoy Verandah (FD-255) including reassembling complete all as shown in FD drawings:-

S&F MS conduit 12mm bore as in short runner of by welding complete all as specified & directed.

S&F MS conduit 12mm bore as in long runner of by welding complete all as specified & directed.

S&F top of the teapoy verandah made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F of rubber shoe for leg complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Teapoy Verandah for painting, applying one coat of spray painting with synthetic enamel paint as per required colour over & including one coat of red oxide primer complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Rack side steel with tray (FD-97) including reassembling complete all as shown in FD drawings:-

S&F shelves made out of 1.25mm thick PGI Sheet Size 685mm x 255mm complete all as specified & directed.

M&L Points welding as required complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Rack side steel with tray for painting, applying one coat of spray painting with synthetic enamel paint olive green/grey colour over & including one coat of zinc primer complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Rack shoe steel (FD/E6/MAP/02) including reassembling complete all as shown in FD drawings:-

M&L repair to the rack shoe steel and welding wherever required, remove dents & rust of whole rack and making it servicable and applying one coat of synthetic enamel black paint on whole surface complete all as specified & directed.

S&F jali shelves made out of 3mm dia MS rod welded to frame complete all as specified & directed.

S&F Hard rubber shoe best qulaity as per existing size and shape

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Chair tubular steel with arm (FD-75) including reassembling complete all as shown in FD drawings:-

S&F arm wooden made out of 1st class hardwood (Teak) and painted with black synthetic enamel paint glossy finish complete all as specified & directed.

S&F Seat frame including canning as per 'Godrej' pattern complete all as specified & directed.

S&F Back frame including canning as per 'Godrej' pattern complete all as specified & directed.

S&F MS Machine made screw with bolt, 50mm to 65mm long 3mm to 5mm dia with washers complete all as specified & directed.

M&L cutting the existing damaged portion of conduit pipe and welding by providing 20mm dia conduit pipe 18 gauge (approx 250mm long) bend to standard complete all as specified & directed.

S&F MS flat iron 25mm x 3mm, 50mm long for fixing back frame/seat frame by gas welding to steel frame of chair for support complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Chair tubular steel with arm for painting, applying one coat of spray painting with synthetic enamel paint olive green colour over & including one coat of red oxide primer complete all as specified & directed.

S&F PVC rubber shoes for leg and cap for top complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Chair Verandah (FD-256) including reassembling complete all as shown in FD drawings:-

S&F leg made out of 20 mm dia conduit pipe 16 gauge, 1250mm long complete all as specified & directed.

S&F stiffner made out of MS Rod 10mm dia, 460mm long complete all as specified & directed.

S&F hard rubber shoe best quality as per existing size and shape complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Chair Verandah for painting, applying one coat of spray painting with synthetic enamel paint over & including one coat of red oxide primer complete all as specified & directed.

M&L removing existing old worn out nylon tape/cane from chair verandah and reweaving the chair with new 04 mm thick oval shape of white colour best quality cane complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Computer chair / Revolving chair (FD/E6/MAP/01 & TP) including reassembling complete all as shown in FD drawings:-

S&F 50mm thick high density foam cushion for seat of size 425mm x 400mm, edges trimmed duly covered with good quality tapestry cloth as approved by Engineer-in-charge complete all as specified & directed.

S&F 50mm thick high density foam cushion for back including 6mm thick foam cushion (HD) lining on back side of chair computer of size 400mm x 300mm edges trimmed covered with good quality tapestry cloth as approved by Engineer-in-charge complete all as specified & directed.

S&F Seat made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 425mm x 400mm complete all as specified & directed.

S&F Back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 400mm x 300mm complete all as specified & directed.

S&F of handle as per existing size and shape (as per sample) complete all as specified & directed.

S&F of Hydrulic as per existing size and shape (as per sample) complete all as specified & directed.

M&L Point welding to various parts as required complete all as specified & directed.

S&F of Castor wheel padestal as per existing size and shape (as per sample) complete all as specified & directed.

M&L applying one coats of 1st quality synthetic enamel paint colour black by spray machine after preparation of surface on existing frame work of computer chair/revolving chair complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Chair school with hand board (FD/E6/MAP/05) including reassembling complete all as shown in FD drawings:-

M&L openable Hinged on RHS table top to slide on rod for adjustment complete all as specified & directed.

M&L 18mm thick PLB with 4mm thick teak wood edge all around seat board on top openable with teak wood edging 300mm x 585mm complete all as specified & directed.

M&L one piece PVC back and seat complete all as specified & directed.

M&L Basket made out of 5mm dia mild steel wire welded to frame of chair complete all as specified & directed.

S&F hard rubber shoe best quality as per existing size and shape complete all as specified & directed.

M&L applying one coats of 1st quality synthetic enamel paint (Black of chair school with hand board) as approved over & including one coat of redoxide primer by spray machine after preparation of surface complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Rack steel adjustable 6 Tier (FD-106) including reassembling complete all as shown in FD drawings:-

S&F of shelves with nut and bolt/welding where ever required complete all as specified & directed.

M&L repair to the racks after removing dents from back, Top, bottom and each shelves, repairs to legs and refixing by welding and making it serviceable complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Rack steel adjustable 6 Tier for painting, applying one coat of spray painting to inner and outer surface with synthetic enamel paint olive green / Amaton over & including one coat of red oxide primer complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Table Computer (FD/E6/MAP/03) including reassembling complete all as shown in FD drawings:-

S&F Table top 18mm thick prelaminated particle baord as per existing size and shape complete all as specified & directed.

S&F Bottom shelf 18mm thick particle baord as per existing size and shape complete all as specified & directed.

S&F shelves 18mm thick prelaminated particle baord as per existing size and shape complete all as specified & directed.

S&F mouse tray 18mm thick prelaminated particle baord as per existing size and shape complete all as specified & directed.

S&F drawer made out 18mm thick prelaminated particle baord as per existing size and shape complete all as specified & directed.

S&F telescopic channel as per existing size and shape for key board drawer complete all as specified & directed.

S&F Rubber shoes for leg of the table complete all as specified & directed.

M&L Point welding as required complete all as specified & directed.

M&L applying two coats of 1st quality synthetic enamel paint colour olive green/Black as approved over & including one coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Book case steel 4 compartment (FD-1028 & 1028A) including reassembling complete all as shown in FD drawings:-

S&F legs base in "U" shape made out of 1.25mm thick PGI sheet welded with electric welding machine to match with existing complete all as specified & directed.

S&F door shutter made out of 1.00mm thick MS sheet size as per drawing complete all as specified & directed.

S&F MS chromium plated handle 100mm as per existing pattern and design of book case complete all as specified & directed.

S&F 3 way lock, 4 levers with duplicate keys as approved by GE complete all as specified & directed.

S&F Roller as per existing door size as shown in drawing complete all as specified & directed.

S&F 5.5mm thick sheet glass, size as per drawing complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Book case steel for painting, applying one coat of spray painting to inner and outer surface with synthetic enamel paint olive green over & including one coat of red oxide primer complete all as specified & directed.

M&L dismantling / taking out of unserviceable / damaged parts and carrying out repair and replacement of following under mentioned parts of Rack Pigeon hole steel (FD-106) including reassembling complete all as shown in FD drawings:-

S&F of shelves with nut and bolt/welding where ever required complete all as specified & directed.

Repair to the racks after removing dents from back, Top, bottom and each shelves, repairs to legs and refixing by welding and making it serviceable complete all as specified & directed.

M&L removal of old paint, dent, rust (by emery paper) and preparation of whole surface of Rack Pigeon hole steel for painting, applying one coat of spray painting to inner and outer surface with synthetic enamel paint olive green over/Amaton & including one coat of red oxide primer complete all as specified & directed.

For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted from total quoted amount of BOQ to arrive contract sum.

M/s Pee Jay Enterprises

Janeshwar Dass Narender Kumar Jain