R/M of Link Road Pilibhit road se saidpur Chunnilal tak under Mandi Samiti Bareilly

Earth work in cutting or in embankment in ordinary soil excavation to be in the regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20 cm thick layers including ramming and dressing the surface to required levels and slopes and also including 1.5 mt. lift & 30.0 M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30.00 M distance as directed by the (Excluding Royalty) E.I. S.I. No. 253.

Providing & laying spreading and compacting stone aggregates of specifice size to water bound macadam specification including spreading in uniform thickness hand packing rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber appling and brooming crushable screening to fill-up the interstice of coarse aggregate watering and compacting to the required density Grading 3 as per Technical specification Clause 405 Mord Book Page No. 4-18

Providing & applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with bitumen VG-10 BULK using distrubutor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specifiction clause

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade VG10 bitumen BULK or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades.Technical specification clause 508

Providing, and laying Seal coat with approved 6 mm grit and VG10 BULK bitumen including heating the bitumen to the required temperature mixing in mixer including supply of all materials and maintenance of side parties and watering them during operation charges of road roller with fuel maintenance of barriers caution posts provide light at night for proper completion of work as directed by the Engineer in charge. as per Technical specification clause 510

Brick soiling with straight over burnt brick laid on edge dry with brick edging on both sides including preparation of sub-grade to prescribed camber and including supply of brick, filling joints with local earth of P.I. 5-7 spreading binding coat 1 cm (3/8") depth of local earth over entire surface including labour, T&P etc. required for proper completion of the work. SI No. 762(b

Providing and fixing of Recto reflective steel sign board as per drawing design including writing of details as specified by Engineer in charge. including supply of all materials, labour T&P, cartage upto site complete in all respect required for proper completion of the work and as per direction of E/I.

Part-B Maintenance of Bituminous surface road and gravel or WBm road including filling pot holes and patch repair etc. restoration of rain cuts and dressing of side slop standing tree at adjacent to road wherever cutting of branches of tree, shurb and traimming of grass and weeds etc mentioned in GO No.55 12022/187/23-9-2022-02 Nabard / 2021 Dt 28.04.2022 & Enc letter No. 14 BDD-1 (NH)/40 MT-11/ 2024 Dated 03.01.2024 subjected to approval from Govt. maintence of 1st Year after completion of work @ Zero % of Total PC work amount of first Year @ 0.00% of Total Work Amount of PC Area

Maintainance of Second Year @ 1.00% of Total Work Amount of PC Area