Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC 72 5 53 PIPE ROAD PO BARRACKPORE DIST 24 PARGANAS NORTH PIN 700120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹15.5 L+₹66,823 (4.50%)Rejected-Finance GOALAPARA MONIRAMPUR PO BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700 120 WB | KOLKATA | 24 PARGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-Finance Rejected due to higher rate | |
| 3 | L3₹15.8 L+₹96,387 (6.49%)Rejected-Finance | L3 | Rejected-Finance Rejected due to higher rate | |
| 4 | L4₹16.1 L+₹1.2 L (8.21%)Rejected-Finance | L4 | Rejected-Finance Rejected due to higher rate | |
| 5 | L5₹16.1 L+₹1.3 L (8.49%)Rejected-Finance | L5 | Rejected-Finance Rejected due to higher rate |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
REPAIR TO CUPBOARD, DOOR, WINDOW AND CERTAIN MISC B/R REPAIR WORK AT SINGLE OFFICER LIVING ACCN BLDG NO P-50, P-51, P-99 AND P-100 AT 6 WING AF STN UNDER GE (AF) BARRACKPORE
2023_MES_576276_3
8410/BKP/AF OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF Barrackpore
Class-E,
Category-a(i)
2 documents required · 2 mandatory
₹500
GE AF Barrackpore
₹30,000
Yes
16 Jun 2023
8 May 2023
31 May 2023
8 May 2023
29 May 2023
15 May 2023
Amount
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided and removing debries from site of work complete all as directed..
Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.
Taking down shutters of any description exc. 1.00 sqm but n.exc. 2.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description n.exc. 1.00 sqm each complete all as specified and as directed.
Taking down shutters of any description n.exc. 1.00 sqm each and refixing in the same opening complete all as specified and directed.
Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviciable material from site complete all as specified and directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed.
Material and labour for providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall where the apron is not provided using chemical emulsion @ 7.5 ltr per Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed.
Material and labour for treatment of soil under existing floors using emulsion @ one ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with CM (1:2) (1 Cement : 2 Coarse Sand) to match the existing floors and making good disturbed portion etc complete all as specified and directed.
Material and labour for providing chemical emulsion at points of contact for wood work @ 0.5 ltr per hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same and making good disturbed portion complete all as specified and directed.
Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in coping, bed plate, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed
Material and labour for pre-cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar (1:4) including demolition of reinforced concrete (reinforcement cut as required to facilitate demolition) and removal of rubbish from site complete all as specified and directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and directed.
Supply and fix solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet plain colour reinforced with MS square tube as per specification and drawing complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.
All as per item No 16.00 above but wire gauzed shutter, the wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and -ditto-.
Material and labour for 2nd class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n. exc 200 cu. cm each complete all as specified and directed.
Supply and fix anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
Supply and fix anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.
Suplly and fix 75mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
Supply and fix 100mm long aluminium handles, cast type, anodized complete all as specified and directed.
Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed.
Supply and fix 100mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Supply and fix galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix in repair 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed.
Material and labour for mild steel TMT bar 6 to 8 mm dia cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Supply and fix in repair 25mm thick pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination with 2nd class hard wood leaping, fixed with screws to timber frame work complete all as specified and as directed.
Supply and fix in repair 18/19mm thick pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination with 2nd class hard wood leaping, fixed with screws to timber frame work complete all as specified and as directed.
Material and labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20mm thick cement screed bed or bedding layer in CM (1:6) including demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. including removing of debris from the site complete all as specified and directed
Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationscomplete all as specified and directed.
Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement on wall complete all as specified and directed.
Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement in ceiling complete all as specified and directed.
Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed.
Materials and labour for complete removal of existing treatment of old decorated surfaces of walls and applying two coats of synthetic enamel paint including preperation of surface complete all as specified and directed.
Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.
Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.
Supply and fix in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
Supply and fix in repair 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fix in repair PVC connection pipe 15 mm dia with PTMT nuts of length 450 mm complete all as specified and directed.
Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Disconnecting existing tanks of capacity exc 500 litre but not exc 1000 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) including dismantling of old existing tank complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
All as per item No 50.00 above but 20mm bore and -ditto-.
All as per item No 50.00 above but 25mm bore and -ditto-.
Supply and fix 15 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed.
All as per item No 53.00 above but 20mm bore and -ditto-.
All as per item No 53.00 above but 25mm bore and -ditto-.
Laying / fixing only 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed. Note;- Serviciable GI pipe shall be refixed under this item obtained from item No 50.00 after taking up/ down.
All as per item No 56.00 above but 20mm bore and -ditto-. Note;- Serviciable GI pipe shall be refixed under this item obtained from item No 51.00 after taking up/ down.
All as per item No 56.00 above but 25mm bore and -ditto-. Note;- Serviciable GI pipe shall be refixed under this item obtained from item No 52.00 after taking up/ down.
Supply and fix in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches complete all as specified and directed.
Supply and fix in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches complete all as specified and directed.
Supply and fix in repair 110 mm bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and directed.
Supply and fix in repair 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.
Supply and fix in repair 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.
Material and labour for cutting down vegetation growths like plants / trees of girth n exc 15cm from roof tops / sides, external walls of bldgs, chajjas, wall juctions at junction of rain water / waste water pipe junctions including removal of roots and taking out carefully possible quality of concrete in roofs embedded in walls / slab surfaces making good affected locations and applying approved chemical (herbal medcine) to arrest further growth and making good the distrubed surfaces with PCC (1:2:4) type B-1 or CM (1:2) complete all as specified and directed. Note : The quoted rate shall be deemed to include the cost of scaffoloding / staging upto four storey bldgs.
JADAV CONSTRUCTION
SITARAM CONSTRUCTION
NARAYAN BUILDERS
NC BOSE AND CO
Das and Brothers
APOLLO TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .