Providing Barricading of spillway walls and development of existing parks

Amount

Dismantling concrete( e) Reinforced cement concrete(CSR Item No.8.6 e)

Dismantling concrete (c ) c.c. plain 1:3:6 mix (CSR Item No.8.6 c )

Earth work in excavation in of foundations of bridges culverts, building including handing of material with a combined lead of 15 mtr dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around:-( c ) For hard clay soil or hard conglomerate or semi- rocky type of the nature of pick - jumper with occasional blasting.(CSR Item No.6.7c)

Wrought iron & Mild steel ladders, framed grills, gratings etc. with end of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws , welding rod complete fixing in position.(CSR Item No. 18.4)

Providing & Fixing of 10 gauge welded mesh of 25mm X 25mm size fixed on steel glazing with Ms flat 20mm x 6mmbeeding complete in all respect including painting two coats with synthetic Enamel Paint and Priming Coat (CSR Item No. 18.31)

Cement concerte1:4:8(a ) With stone ballast 20mm gauge (ii) Mixing by mechanical means using concrete mixer volumetric type (CSR Item No.10.11 (a) ii)

Cement Concrete 1:3:6With stone blast or shingle(ii) Mixing by mechanical means using concrete mixer volumetric type(CSR Item No.10.12 (a) ii)

Cement concrete 1:8:16 (a ) With brick ballast 20mm gauge (ii) Mixing by mechanical means using concrete mixer volumetric type(CSR Item No.10.7 (a) ii

Cement Concrete 1:2:4With stone blast or shingle( ii) Mixing by mechanical means using concrete mixer volumetric type(CSR Item No.10.13 (a) ii)

Squared rubble masonry uncoursed or built to courses in foundations and plinth in cement mortar 1:4 to a pattern if specified.(CSR Item No.12.21)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth(CSR Item No.10.15)

Centering and shuttering for columns ( square or rectangular or poly gonal in plain)(CSR Item No.9.4)

Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie. Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete. (CSR Item No.18.53)

Applying priming coat with metal primer on new steel or iron work including preparation of surface.(CSR Item No.16.20)

Painting two or more coats excluding primeing coat with ready mixed paint for metallic surface in all shades on steel or iron work (CSR Item No.16.21)

Providing and laying 50mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design/shape laid in Ordinary Grey and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, complete as per direction Engineer- in-charge IS Code: 15658(2006) A&C (CSR Item No.14.136)

Providing and laying Italian machine cut, mirror polished marble stone flooring, in required design (Simple geometrical, abstract etc. ) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18mm thick stone slab laid over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by Engineer-in-charge.18mm thick Italian Marble stone slab, Perlato, Rosso Verona, Fire Red or Dark Emperadore etc.(CSR Item No.14.145 a)

Providing and fixing (PPGL) precoated painted galvalume sheet roofing ( size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti capillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy=550MPa) metallic coated with Zinc – Aluminum alloy ( i.e 55% AL, 43.4% Zinc, 1.6% Si-Zincalume)AZ150( Min.150 bm/mm2 total on both side ),pre painted paint super durable polyster XRW quality paint includes inorganics infrared reflective pigment. The sheet confirms to general requirements of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40 % should be supplied in single length upto 12 meters or as desired by Engineer -in -charge . The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal, complete up to any pich in horizontal/ vertical or curved surfaces, excluding the coast of purlins, rafters and trusses and including cutting to size and shape wherever required.( b) 0.60mm ( + 0.05%) thick (CSR Item No.13.27 (iii) b)

Providing and fixing stainless steel pipe and fitting of grade A ISI-304 as per IS Standard 3448 complete with press type fitting ( fitting shall be paid for separately ) i/c fixing of the pipe with clamps at 1:00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in -Charge. ( the pipe length inserted in the fitting shall not be measured for payment ) (e ) 42.70mm outer dia pipe. (CSR Item No. 18.55 (e )

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B-Class, including cost of specials such as tees, bends, sockets elbow etc., cutting threading and testing in trenches in the ground complete.( g) 65mm i/d ( CSR item No. 28.36 (g)

Providing, fixing and jointing ISI Marked Gunmetal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. pipe lines laid in ground or inside buildings including all carriages complete. ( g ) 65mm i/d Gun Metal peet valve heavy pattern (CSR item No. 28.43(g)

Bidder Name

Amount in Words

PARMINDER KUMAR KANWAR

AMIT SPEHIA

RAHUL SHARMA

RAM PARSHAD VERMA GOVT CONTRACTOR

RAHUL SHARMA

AMIT SPEHIA

PARMINDER KUMAR KANWAR